Configure Windows RT VPN connection to the VPN Cisco

Similar Questions

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Why windows does not connect to the Group Policy client?

  I am currently using a dell inspiron with windows 7 Edition 7720 Home premium and recently a message started to appear above my taskbar saying

  "Unable to connect to a windows service.
  Windows could not connect to the Group Policy Client service. The problem prevents standard users to log on to the system.
  As long as administrator, you can go through the system event log to see why the service failed"
  Anyone know why this is happening and how to fix it?

  The resolution is quite easy. Ignore all these tech geeks here and on other sites that just want to show how they can play with the registers - a very dangerous game.  Go to search, type in cmd, open cmd as administrator.  Type exactly this (with the indicated spaces): netsh winsock repair, and then press ENTER. You need to restart (NOT close and turn on) your computer. Bingo! Unfortunately, this condition can re - occur from time to time, as if you start your computer before you turn on your internet connection and establish a good connection.  Don't worry the fix takes about 3 to 5 minutes depending on your speed of restart computer.

• Windows could not connect to the Service Notification of system events

  Yesterday, everything was normal before turning off my computer. However, I saw a message "that Windows could not connect to the Service Notification of system events" after I turn it on now.

  My operating system is "Win7 Ultimate". What should I do to fix this?

  Hi Aporch,

  You can check if System Event Notification Service is enabled and set to automatic.

  Here's how you do it;

  1. Select start > run > and type services.msc.

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.

  If this does not help, try this:

  1. click on the Start button.

  2. type Cmd in the search text box.

  3. press on Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  4 type netsh winsock reset at the shell command prompt, and then press the Enter key.

  5 restart the computer

  If please reply and let us know if your problem is resolved or if you need further assistance

  Aziz Nadeem - Microsoft Support

• Windows could not connect to the user profile Service

  I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

  "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  The error itself didn't come for two days now, but the problems still present themselves:

  -My personal profile seems gone.

  -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

  -Return to default settings

  -Slower than usual start.

  I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

  Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

  To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

• Said computers that windows could not connect to the system event notification service

  Said computers that windows could not connect to the system event notification service. Does not connect as an administrator.

  I played the system restore. Solved the problem, but why did it happen?

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.

• Windows 8 "not connected to the network" but it is, shows computers and can connect to the internet. How can I fix it

  I used the Windows 8 Pro Upgrade on a Windoxs XP pro installation.  Everything works except that the network and sharing Center indicates that the computer is not connected to a network, but it is.  I can files in front on other computers on the network (at home) and I can access the internet.  The active profile is public, although it should be private. I created this to access the homegroup during installation.

  I'm trying to get a first HD Homerun operation and if Media Center does not have any network, he sees no tuner either.

  What can I do to get this working properly.

  a. no red X

  1. I tried to download a different driver, but it didn't work at all so cancelled.  To check if it was a pilot, I bought a usb wireless adapter.  I've disabled the ethernet connection and used the wireless connection.  The results are the same regardless of which connection I use.

  2. ran every convenience store without success

  3. services were what they were supposed to be

  4 safe mode is worse.  No network connection (cannot see other computers in all), although internet is accessible

  5 start gives the same results. "You are not connected to a network" yet the computers on the network are visible and accessible top records.  Internet is available.

  I installed the software very little on this computer (just installed Win 8 last week.)

  The only installed software is software HP Officejet L7680, Brother HL5250DN & first Silicon Dust HD Homerun software driver. I'm trying to set up basically as a DVR, so very little will be on it.

  The only thing I can think is that I started with the installation of XP has been implemented using a VPN to connect to our network at work. This means that the computer should be part of the field it. Is it possible victory 8 retrieves these settings and now here's what's causing my problems? (I think that very few came from an installation of XP, but I noticed that some parameters met).

  I plan to start again and re-installed Win 8 a last ditch effort... If you can offer any suggestions on repairing this conditioin, please provide me with the best way to re - install Win 8 as a clean install (without the things I installed). I'll then make sure that the network is working correctly before installing anything.

  *************************************************************************************************************

  A follow-up for this reading. My problem was apparently caused by the upgrade of XP and usinging Dungeon files and SETTINGS. Although there are very limited items brought back an installation of XP, something is buried somewhere off network connections.

  To solve this problem, Windows 8 has a new feature called reset. This essentially Setup all over again if you choose the option to delete files. You must enter the product key again when you do this. This is a clean install.  I had to update the graphics card drivers, add Media Center back, install HD Homerun Prime, run the Advisor of cable, making the TV configuration and finally got it works as I had expected.

• Windows Vista computer connects to the internet, but not ping to auto DHCP name

  Trying to get my Vista machine to have the file and printer sharing, I can see attached machines, and they can see the Vista machine, but does not connect to the computer.  The Vista machine will not see public folders with error code: 0 x 80070035 the network path was not found.

  Ping the DHCP name provides:

  Main2 ping [fe80::12:f74:b94e:94fb 8%] of 8% with 32 fe80::12:f74:b94e:94fb
  YTES of data:
  General failure.
  General failure.
  General failure.
  General failure.

  Ping statistics for fe80::12:f74:b94e:94fb 8%:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss),

  Ipconfig/all

  Windows IP configuration

  Name of the host...: Main2
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Belkin Wireless G Desktop Card
  Physical address.... : 00-11-50-D6-32-97
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e497:9802:e6a6:40ce % 10 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Tuesday, October 21, 2008 23:06:50
  End of the lease...: Thursday, October 23, 2008 11:06:50
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e50:12:f74:b94e:94fb (area
  ED)
  Address IPv6 local link...: fe80::12:f74:b94e:94fb %8 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {E71A931D-A587-49DD-BF49-209236344
  523}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help?

  
  

• Satellite P840 - Windows 8 - stop connection to the WiFi

  Hello

  My laptop has stopped to connect to my home wireless network, a week ago.

  When trying to connect it says 'unable to connect to the network', or connects for a few seconds change a limited State, then falls down. (no assigned IP address) When we look at the WiFi adapter network adapters screen turns off during the disconnection then re-active.

  I tried to connect to the other connections wifi with the same result.

  Steps:

  Reinstalled wifi drivers
  Tried to use an adapter USB WiFi (same result)
  removed the networking features in win 8, added again.
  Updating of windows 8 back to factory default.

  Can anyone suggest where this problem could be?

  Hello

  Like you had the same problem using the external USB WiFi dongle, I don t think that this WiFi problem is related to internal Wlan card.
  I guess that the question could be related to the combination of WiFi card and router Wlan.

  I recommend you to reset the settings of the router.
  Reconfigure the router and don t of first set encryption. It's just for testing purposes. It would be interesting to know if it would be possible to connect to the open Wlan.

  The next step: disable the TCP/IPv6 protocol in the network settings to use only the old TCP/IPv4 protocol and wireless.

  Next step: update the ip address by using the command: + ipconfig / renew.
  (in search, type CMD to start the console and here you can use this command)

  Next step: disable the firewall and check the settings possible antivirus. Some antivirus software may affect the connectivity.

• Windows MCE and connect to the shared directory of the server

  Well, I know it's more a matter of Microsoft than a Qosmio question, however, I think that it is better to ask here among others who can actually thought it out instead to pay $95 to Microsoft to answer a question which ought to be established somewhere anyway.

  I have a LAN in my house with several password protected Windows 2003 servers. I do not use a domain system because I've never been fond of roaming computers that belong to a domain.

  I prefer also to encrypt and password protect files on my computer using PGP disk password protect the machine itself. After all, my son likes to watch his cartoons on the computer and at the age of 3, type a password of 8 characters with high, low, numbers and signs of punctuation is a bit out of reach for the moment.

  So now I have bore you with all rebuttles to questions like "Why don't you do this rather", Let's get to the meat.

  Is anyway in Windows XP Media Center edition that when I connect to a shared directory on the server using Windows file sharing (SMB/CIFS), I can choose to save the password?

  Dialog box, I have in mind is the one marked 'Connect to' that appears to request a username and password when a UNC network path is entered directly in the Explorer address line or the path is traversed through "My Network Places" and permissions are insufficient for with the users currently logged in user name and password combination.

  This feature exists on XP Pro, but not on the House and I was under the impression that Media Center was closer to Pro home. If I can't find a solution to this, so I have to install XP Pro on the machine and not the Media Center extensions and this will make me really sad :(

  Thanks in advance

  Hello

  Well, I put t know how you want to watch the video files with the Windows XP Media Center from the file server, because I don t know if the WMC supports this feature.
  But if he finds an interesting site on a simple file sharing on Windows XP Home Edition and Windows XP Pro.

  Please visit this link:
  http://www.practicallynetworked.com/sharing/XP/filesharing.htm

  Hope you find the solution. Please let me know.

  Good bye

• HP PavilionNotebook-15-p101nm: "windows could not connect to the"wifi"

  new tour.  installed win7/64, gatherd all the missing drivers (Device Manager was all yellow) ultimately it does not connect to the internet. What to do... ? He sees the wifi, knows his name, etc., but does not connect to it. neither cable nor wifi...

  thnks in advance

  configuration of the router... solved the problem... connected via the MAC address... ...

• Desktop Windows 7 and windows 8 computer connected to the router

  I have a windows 7 64 bit desktop and a photosmart connected 7510 e wireless printer, although the office is wired, I bought your desktop windows 8 and connected to my router and set up my e-mail account and it did pick up my printer and can print but not scan or EFax, now I get a message from 1625 and cannot print from it.

  I tried to download the print and the analysis of web site of HP Assistant, but my PC froze.

  What should I run the disc or put up a home group, not worth to be able to E Fax or scan to email with it, simply print as he did before.

  Also on my windows 7, I can connect to connected HP and my printer appears ok, when I press the icon for the printer for Eprint it shows my email address of HP but when I press the Fax icon it doesn't say ANY NETWORK. Cloud services set up a static IP address for me last year as whenever we had a power outage I lost my connection to my printer. If anyone can help, I'd appreciate it.

  Emma22, welcome to the forum.

  Here are the 8 Win driver for the printer.  Their installation should correct your problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Computer Windows XP cannot connect to the gateway of media converter where as Linux machine can.

  In my office, we have 2 internet connections in the 1 come from media for Cisco router converter and then switch and 1 other comes through router dlink Media Converter and then to the same switch since 1 connection uses the gateway 1 and another 2. In this scenario when the system windows xp or Linux system if uses gateway 1 net will properly and in a way even when windows xp system attempts to use gateway net 2 will come not wat is not here in this scenario pls help me...

  original title: network problem

  Hi Manas,

  Since you are still facing problems, you can ask your question in the Forums TechNet's Windows XP for assistance.