"Confirmation of the password of the network"

Similar Questions

• new certified vm server connects to the network

  Hi all

  I pluged in my new server certified virtual machine in my data center network and it loaded just fine. I have confirgued it according to the network address given to me by the data center and at the end he showed a screen with the right static IP address and download Vi instructions via the IP address. However, I couldn't have the static IP to shown in a web browser ping, coudId or ssh on the server using the IP address specified.

  I then asked for help and a fee of 75.00 got a data center tech to confirm all the network settings were indeed correct. Then, I tried the test of the Network Manager page in the Setup menu and found that the server can ping the IP Address of the gateway to the data center, but nothing else? Finally, the data center tech abandoned and said that he had never seen a VM OS system and would have no way to help me just shoot the problem. The end result is that I had to remove my new server of the Center to solve the problem somewhere else. The goodnews is that Aberdeen the company I bought the server from is fine to bring back and ensuring that everything is confirgured correctly and work. However, I would perfer to fix it myself rather than taking the time to send her forward and backward.

  Is a familiar problem anyone? Something simple, I'm dominant? Of the suggestions before I have to return?

  This is the first time I tried something like that.

  Thanks to all those who have the time to answer, Techmen

  ESXi will be set to auto by default as well.  I would have their double control over all parameters of VIRTUAL LAN and also try a simple switch with a PC and the host.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• I don't remember the password for my network, but I do remember the password for my computer and my home group.

  I don't remember the password for my network, I remember the password to my computer and my home group, they are all different to change that, but family crisis distract me unable to use my ipad now or my other computer help!

  original title: password

  Hello

  What operating system is installed on the computer?

  Perform the steps mentioned below, if you have Windows 7 installed on the computer and see if the problem persists.

  a: right click on the wireless in your taskbar icon.

  b: open network and sharing Center and then click manage wireless networks on the left.

  c: you will see all the networks you have connected too.

  d: right click on any connection to Properties.

  e: click on the Security tab that shows the details of the security of the network including the password. Click on the box to Show characters.

  Hope this information helps.

• My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  ESTABLISHING A NETWORK.

  My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  Hello

  1. don't you make changes on the computer before the show?
  2. what version of operating system you are using on the computer?
  3. which network you're talking about (home wireless network or group)?
  4. which steps have tried?

  
  If you use a group home on the computer, see the link for more information.
  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  You can also check out the link.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

   
  Provide us more information for you to help.

• Whenever I update "send/receive" a message asking me to write the network password and user name.

  I am connected to wifi in the hotel (Orange) and I can't SEND email, I just have to receive them.

  Whenever I update "send/receive" a message asking me to write the network password and user name. This from my mail server (not orange because that one is ok I have access to the internet).

  Most of the suppliers do not let you send if you are not connected through them, or they have special settings.  So for now, see if you can access your e-mail via webmail and use this interface and in the future, contact your ISP and ask them if there is a way to send emails when you are connected through a different network.

  Steve

• The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters

  Hello

  My operating system is window XP and my D-link wifi I am connect the wifi type password

  I get the error message...

  (The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters)

  Another wifi connect operating system works very well for example... Vista or window 7 only problem window XP

  Shafique.Cheena

  Hello

  Glad to know that the question that you were before face is now resolved. For the question you're faing while changing the name of the computer to the domain, I would say that you check out the link and follow the steps.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  http://support.Microsoft.com/kb/295017

  If the problem persists, post the question in the Technet forum that would be better suited. Check out the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• How to share a folder in windows XP with password so that people on the network can see only its folder

  Original title: Network share

  How to share a folder in windows XP with password so that people on the network can see only its folder

  Hello

  See the following article:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP:

  http://support.Microsoft.com/kb/307874

• Try to connect to the router but I get the error: "the network password must be 40 bits or 104 bits according to your network configuration."

  Hi Ive got three computers in the home two of them are not connected to my TALKTALK router no problem, but the third connect once but its gives me "the network password must be 40 bits or 104 bits according to your network configuration. This can be entered as 5 or 13 characters ascil or 26 hexadecimal characters. "error please help

  for any other computer my password work but when I try the same password for this one gives me the message above.

  Thank you all

  original title: 40-bit or 104-bit error

  Maybe you need this patch: http://www.microsoft.com/download/en/details.aspx?id=1974

  What version of Windows using this computer and what type of encryption is the router?

• "Cannot connect to the network." When you enter the correct password for wireless network

  Hello

  I have the HP Photosmart C7200 all-in-One series.

  This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem.  I have a Verizon FiOS (Actiontec) router.  I am trying to connect to it wireless; the network key is using WPA authentication.  I followed all the instructions in the quick start guide.

  My printer detects my network and application authentication key.  I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network.  I know that my key is correct; I connect to my router very well through several laptops, PDA, etc.  I have reset the settings network default manufacturer and tried without success.

  I don't know what kind of trouble shooting I'm supposed to do here.  The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.

  Your help is greatly appreciated.

  Edit: I printed the test report wireless network, here are the results:

  Radio on   PASS

  The radio work   PASS

  Ethernet cable not plugged in   PASS

  Network name (SSID found)   PASS

  Security   PASS

  The printer settings compatible with the configuration of the wireless router   PASS

  No filtering   IN CASE OF FAILURE

  Connected   Not work

  The signal strength   Very low

  Other networks detected matching you the network name (SSID)   NO.

  I know this sounds strange, but try changing channel by channel 11 of the wireless router.

• The "network password" guard opening on my screen

  My wife has Windows XP, and it uses the Windows Internet Explorer. For some reason, the block that is titled "enter network password" keeps opening on the screen. There the line 'Server' and it is grey and says "pop.att.yahoo.com."  The block is also the name of the user who is over; and the password a lot *. She has no idea what the password was, and suppose that the asterisks are correct.

  She hits the OK it disappears and 1 minute later opens again. Same thing with 'Cancel' and the X box.

  She has done several resets the computer and continues to be

  What it should do to eliminate it?

  Hello

  ·         What version of Internet Explore do you use?

  ·         A pop up to appear when you enter the Web site, or all?

  ·         You use Microsoft Office Outlook Internet explore? What version?

  ·         You use a paid yahoo account?

  Yahoo will not use accounts free yahoo in Outlook. If you experience this problem when you use Microsoft Office outlook in internet explorer, click on this link and check if that helps.

  I get a prompt to enter the network password

  http://Office.Microsoft.com/en-GB/Outlook-help/i-get-an-enter-network-password-prompt-HA010151354.aspx

  Also try to optimize internet Explorer and check if it helps.

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

• When creating an AD HOC network, I get this error "the network password must be 40 bits or bit 140 according to your network configuration".

  created an ad hoc network on Windows 7 Home premium machine.  When the password was presented by the XP machine at home, the message: "the network password must be 40 bits or bit 140 according to your network configuration.  This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. Do not know how to proceed.  Advice requested

  MNewsome salvation,

  I suggest that you download and install the latest drivers for the network adapter on the computer to the adapter manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the link below and download the document to learn more about the Ad hoc network.

  Special Internet sharing with Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13190

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• How to set the password to protect the network, Windows XP Home Edition

  Another PC can directly access my computer on the Windows network, so I want to set a password to protect my computer.

  There are two basic methods to connect to a computer through a network.

  The first is through Remote Desktop connection.  This method requires that a user connect as if they were sitting in front of the computer.  So simply assign a password for each user in the user Panel must control this access road.  If I remember correctly, Remote Desktop connections cannot do XP Home computers, so this may not apply to you.

  The second is through the sharing of files on the network.  With XP Home (forced Simple File Sharing), each connection sharing file valid as long as the user "guest".  So to control this access, you must assign a password for the Guest user.

  "Set up the password for the user in Windows XP"
    <>http://support.Microsoft.com/kb/555520 >

  HTH,
  JW

• When I try to connect to my Netgear router I get an error that "the network password needs to be 40bits or 104bits depending on your network configuration."

  Hi, I have an Inspiron 6000 labtop Yes it's old but it works :). I also have a Netgear wireless router and I have passwords on my wireless connections and I know of course that the password. When I try to connect to the router wirelessly on what he asks the password as usuall and I type it, and then click Enter. After that, a message appears saying "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. "How can I solve this? Help, please!

  original title: wireless network password problem!

  Hello

  Connect the computer to the router with a wire.

  Connect to the menus and change encryption and password length in the privileges of guide.

  Connection with wire to the router and working with the menu should be explained in the manual of the router.

• Domestic need assistancet to find the password for the network. No disc

  Adding ipod phone to my network. He ask my password that I can't find.   How to find the network password?

  I'm assuming that you need the password of your wireless network.

  You can usually get this by connecting to your wireless router, connection and find the screen where the password is specified.  Wireless router usually has the IP address as any computer on your home network with the last digit the value '1' or ' 254'.  And generally, you would use a browser to connect as, in general:
  http://192.168.1.1

  If you would like more information, please consult the manual of your wireless router.

  HTH,
  JW

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd