Conflict with the L1 backup task backup ARCHIVELOG

Similar Questions

• Satellite R840 - 12 c - conflict with the RFBUS "Bluetooth."

  My Toshiba Satellite R840 - 12 c has a problem with bluetooth.

  On the Device Manager tab, I see a conflict with the RFBUS "Bluetooth."
  So my bluetooth setting does not work... In other words my laptop cannot detect bluetooth despite being bluetooth devices "on"...

  > Tab in Device Manager, I see a conflict with the "Bluetooth RFBUS.
  So uninstall the device first, then download the stack of BT from Toshiba BT portal and after reboot again install this new.
  http://APS2.toshiba-tro.de/Bluetooth/

• 800 - 030qe envy: conflict with the new video card

  I bought and installed an EVGA GEForce GTX960 graphics card and discovered a conflict with the SATA cable on the motherboard connector. EVGA has recommended that I find a SATA cable with a connector at right angles. Can anyone suggest a source for a suitable cable? Mine is red (?).

  @bobsun2, welcome to the forum.

  This is a cable that should work for you.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• ORA-39060: one or more tables has declined due to conflicts with the main table

  Dear all,

  Currently, I have problems, I try to import the entire schema

  bash - $3.2

  bash - $3.2 impdp dumpfile = PRODDUMP BALL/BALL_BALL@BALL. DMP DIRECTORY = DUMP_DIR FULL = Y LOGFILE = IMP Log REMAP_SCHEMA = BALL: BALL REMAP_TABLESPACE = BALLDATA:BALLDATA

  Import: Release 11.2.0.3.0 - Production the my Sep 30 15:28:08 2013

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, Automatic Storage Management, Oracle Label Security, OLAP,.

  Options of Data Mining and Real Application Testing

  ORA-39060: one or more tables has declined due to conflicts with the main table

  UDI-31626: operation there was error ORACLE 31626

  ORA-31626: there is no job

  ORA-39086: cannot retrieve information about jobs

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 3326

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 4551

  ORA-06512: at line 1

  Any solution please

  Hello

  You can use the view:DBA_DATAPUMP_JOBS

  then use the table as drop statements

  drop table . purge;

  HTH

• recover the database by using the RMAN backup archivelogs

  Hello
  
  I tried to find the resolution of this problem in google a lot but couldn't find something useful.
  
  Location:
  
  We try to clone the dev environment of production that are completely on different servers and do not share a common mount point.
  Backup RMAN of PROD with RMAN as well as arch newspapers are kept in this mount point.
  We took control of backup files of PROD restored in DEV fired restore with recovery until a when not.
  Turns out that the sequence was not saved in right backupsets there if recovery has not requested more arch newspapers that are present in the PROD.
  Archs are stored in ASM and only way out is to take of RMAN backup of them.
  We control the file as a repository for RMAN.
  
  my questions are
  
  1. surely, I need to take backup of the control file after I take the log arch by RMAN backup and restore this file command in the DEV of so that when I start RMAN recovery in DEV, database will be able to find the backupset with arch newspapers. But the new restore a control file will delete the data files restored information?
  
  2. If we did not have a point of common Assembly and then after sending the backup destination elements how the database would be the locations of the game copied to the new location of the control file that is restored from the backup source?
  
  Suppose that in the source backups are stored in/backup/rman
  in destination copy us in/backup/clone
  in the PROD control file, their locations are saved in/backup/rman
  so if I restore this command file in custom DEV it find the elements of backup in/backup/rman?
  is it possible to save a backup of outside item in the control of a database file?
  
  
  3 al ' ASM, is there another way to extract the PROD archive logs and apply them to a cloned instance? (sending of newspapers without DR)
  
  The help is very appreciated.
  
  Kind regards
  Marjorie Dutta

  1. .... But the new restore a control file will delete the data files restored information?

  N ° provided that you do not have renamed, moved or abandoned any of the data files that were already copied in DEV. (also, subject that you did not add da new Production data between two backups - otherwise the new controlfile file will wait as datafile also to be present at DEV).
  You will do an incomplete recovery until a certain SNA / sequence # if information subsequent archivelogs beyond your point of recovery in the controlfile are redundant. In addition, a RESETLOGS would be done when you OPEN the database.

  2... how to know the locations of the game copied to the new location of the control file that is restored from the backup source database?

  What is the order CATALOG. In 9i, CATALOGUE could only of catalog datafilecopy. In 10g and more, you can BackupPieces CATALOGUER. Thus, it would "update" the controlfile (which is the RMAN Repository) with information about the BackupPieces that are present in a replacement / new location.
  See http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta011.htm#sthref230

  3. ... ASM, is there another way to extract the PROD archive logs and apply them to a cloned instance?

  According to the version you are using, ASMCMD has a 'cp' command to copy the files from the DSO for the operating system. However, you cannot use ASM to apply directly the archivelogs. You always use the 'RECOVER' of RMAN or SQL command line command.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Problems with the interrupted backup

  I need your help. I have Windows Vista Home Premium 64-bit. I back up my computer (I used 17 8.5 GB DVD), and moved to my computer, it came a message that the last backup is not closed. I tried to take over the task, but I came across the message that tell me to insert disk # 1, who assume that the system could be restart the entire backup process. My question is if there is a way to resume the backup from the point of interruption?

  When the backup to removable media is no option or a way to force the backup to a failure during the backup.  You have to start all over again.

  "CRMMAIA" wrote in the new message: * e-mail address is removed from the privacy... *

  I need your help. I have Windows Vista Home Premium 64-bit. I back up my computer (I used 17 8.5 GB DVD), and moved to my computer, it came a message that the last backup is not closed. I tried to take over the task, but I came across the message that tell me to insert disk # 1, who assume that the system could be restart the entire backup process. My question is if there is a way to resume the backup from the point of interruption?

• Problem with the PC Backup on the external DRIVE on the network drive home.

  I made backups of my laptop wirelessly through my router to my connecting external hard drive attached to my desktop, when I used Microsoft OneCare. Since then, OneCare is being abandoned, I decided to go to the basics of Microsoft (MS). Unfortunately, Ms Essentials doesn't have the features of OneCare. I try to perform a backup using the backup and Restore Center, however, I get an error message when I put backup settings to location network - error code: 0 x 80070534, no mapping between account names and security IDS was done... the results. Is there a KB or a fix for this problem? I've looked everywhere for answers and keep looking, however, I have found no solid solution (especially scams, i.e. pc scanners and fixers of registry error). How is it that I could make a backup without problem with OneCare (that I have no more:{{class=fontblue}} {.}) Now I try to do through the Center backup and restore, the backup does not work! It makes no sense at all!  I have Windows OS: Vista Home Premium 32-bit 2 Gb RAM SP2; HARD drive external: Maxtor 3200 (320Gb) hdd personal

  Thanks, I found the problem. I had to uncheck the ReadOnly property on the folder that I traced to use for my backup location on my HARD drive. In truth, the property read-only (checkbox) is not checked, it is filled (designates the system setting) with a green square in the box (on my Windows XP desktop). I'm sure that others have missed this little nuisance. It's cheating. I don't know how many times I looked at the folder that I use for my backups, forget to realize that the ReadOnly is the default setting for the file. I no longer get the error message: 0 x 80070534, no mapping between account names and security IDS was done. I can't believe it's just as simple as that! My backups work fine.

  Karena, R, thank you for your time and help in any way.

• router in 1941 with the wan, backup interface

  people

  I am looking to set up an interface to backup to a remote site, I have

  the current configuration is a 1941 (15.1 (4) M3) with two interfaces, lan and wan

  I now need to create a course of failover if the wan link fails

  I am considering using a service provider VSDL who will provide me with an Ethernet port on a modem and then use PPPoE to authenticate to the ISP and get an IP etc.

  I intend to use an IP SLA to create traffic and road condition in case of failure of the primary wan link dialer interface failover

  traffic on the two links will be also encrypted on a l2l tunnel using IPsec profiles

  I have already implemented and tested in VIRL using standard Ethernet ports but have not yet tested with an ip and PPPoE Dialer

  I know what I want to do is not new, but I hope someone out there can point me to a recent guide to config or sharing their problems with a similar configuration

  Thanks to anyone who takes the time to read this or answer

  Hello

  between these docs should almost get up and running that have all examples, pppoe, ip sla failover with the ACB and the nat if needed, just tweak it for your configuration

  https://supportforums.Cisco.com/document/32186/dual-Internet-links-NATIN...

  https://learningnetwork.Cisco.com/thread/87317

  http://www.ciscozine.com/dual-Internet-connections-in-activestandby-mode...

  PPPOE

  http://www.Cisco.com/c/en/us/TD/docs/routers/access/800/software/CONFIGU...

  http://www.Cisco.com/c/en/us/TD/docs/routers/access/800/software/CONFIGU...

  EDIT: commands are same for 1941 as 800

  tshoot good guide for pppoe

  http://www.Cisco.com/c/en/us/support/docs/long-reach-Ethernet-LRE-Digita...

• Roll forward standby database with the incremental backup, when a data file is deleted in primary education

  Hello

  I'm nologging operations + deleting some files in the primary and you want to roll forward the day before using the incremental backup Yvert.

  I do in particular, as the files are dropped?

  I got to meet ( Doc ID 1531031.1 ) which explains how to roll forward when a data file is added.

  If I follow the same steps, to make the move to restore the data file newly added, will it work in my case?

  Can someone please clarify?

  Thank you

  San

  I was wondering if reocover noredo is performed before restored controlfile, oracle will apply the incremental backup error-free files, and in this case, what would be the status of the data file in the control file.

  Why do you consider to retrieve the day before first and then in the restaurant of the controlfile will lead to problems. Please read my first post on this thread - I had clearly mentioned that you would not face problems if you go with the method of deployment.

  Here is a demo for you with force logging is disabled. For the first time the day before resuming and restored then the controlfile ensures:

  Primary: oraprim

  Standby: orastb

  Tablespace DataFile of MYTS is removed on primary:

  SYS @ oraprim > select force_logging in the database of v$.

  FORCE_LOGGING

  ---------------------------------------

  NO.

  Currently the tablespace is to have 2 data files.

  SYS @ oraprim > select file_name in dba_data_files where nom_tablespace = 'MYTS;

  FILE_NAME

  -------------------------------------------------------

  /U01/app/Oracle/oradata/oraprim/myts01.dbf

  /U01/app/Oracle/oradata/oraprim/myts02.dbf

  In standby mode, the tablespace is to have 2 data files:

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  /U01/app/Oracle/oradata/orastb/myts02.dbf

  Postponement of the day before on the primary log shipping

  SYS @ oraprim > alter system set log_archive_dest_state_3 = delay;

  Modified system.

  Dropped 1 MYTS datafile on the primary.

  SYS @ oraprim > alter tablespace myts drop datafile ' / u01/app/oracle/oradata/oraprim/myts02.dbf';

  Tablespace altered.

  Removed some archives to create a space.

  [oracle@ora12c-1 2016_01_05] $ rm - rf * 31 *.

  [oracle@ora12c-1 2016_01_05] $ ls - lrt

  13696 total

  -rw - r - 1 oracle oinstall 10534400 5 January 18:46 o1_mf_1_302_c8qjl3t7_.arc

  -rw - r - 1 oracle oinstall 2714624 5 January 18:47 o1_mf_1_303_c8qjmhpq_.arc

  -rw - r - 1 oracle oinstall 526336 5 January 18:49 o1_mf_1_304_c8qjp7sb_.arc

  -rw - r - 1 oracle oinstall 23552 5 January 18:49 o1_mf_1_305_c8qjpsmh_.arc

  -rw - r - 1 oracle oinstall 53760 5 January 18:50 o1_mf_1_306_c8qjsfqo_.arc

  -rw - r - 1 oracle oinstall 14336 Jan 5 18:51 o1_mf_1_307_c8qjt9rh_.arc

  -rw - r - 1 oracle oinstall 1024 5 January 18:53 o1_mf_1_309_c8qjxt4z_.arc

  -rw - r - 1 oracle oinstall 110592 5 January 18:53 o1_mf_1_308_c8qjxt34_.arc

  [oracle@ora12c-1 2016_01_05] $

  Current main MYTS data files:

  SYS @ oraprim > select file_name in dba_data_files where nom_tablespace = 'MYTS;

  FILE_NAME

  -------------------------------------------------------

  /U01/app/Oracle/oradata/oraprim/myts01.dbf

  Current data of MYTS standby files:

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  /U01/app/Oracle/oradata/orastb/myts02.dbf

  Gap is created:

  SYS @ orastb > select the process, status, sequence # v$ managed_standby;

  STATUS OF PROCESS SEQUENCE #.

  --------- ------------ ----------

  ARCH. CLOSING 319

  ARCH. CLOSING 311

  CONNECTED ARCH 0

  ARCH. CLOSING 310

  MRP0 WAIT_FOR_GAP 312

  RFS IDLE 0

  RFS IDLE 0

  RFS IDLE 0

  RFS IDLE 320

  9 selected lines.

  Backup incremental RMAN is taken elementary school.

  RMAN > incremental backup of the format of database of SNA 2686263 ' / u02/bkp/%d_inc_%U.bak';

  From backup 5 January 16

  using the control file of the target instead of recovery catalog database

  the DISC 2 channel configuration is ignored

  the DISC 3 channel configuration is ignored

  configuration for DISK 4 channel is ignored

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 41 type device = DISK

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  Enter a number of file datafile = 00001 name=/u01/app/oracle/oradata/oraprim/system01.dbf

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/sysaux01.dbf 00003

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/undotbs01.dbf 00004

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/users01.dbf 00006

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/myts01.dbf 00057

  channel ORA_DISK_1: starting total, 1-January 5, 16

  channel ORA_DISK_1: finished piece 1-January 5, 16

  piece handle=/u02/bkp/ORAPRIM_inc_42qqkmaq_1_1.bak tag = TAG20160105T190016 comment = NONE

  channel ORA_DISK_1: complete set of backups, time: 00:00:02

  Backup finished on 5 January 16

  Saved controlfile on primary:

  RMAN > backup current controlfile to Eve format ' / u02/bkp/ctl.ctl';

  Cancel recovery in standby mode:

  SYS @ orastb > alter database recover managed standby database cancel;

  Database altered.

  Recover the day before by using the above backup items

  RMAN > recover database noredo;

  From pick up to 5 January 16

  the DISC 2 channel configuration is ignored

  the DISC 3 channel configuration is ignored

  configuration for DISK 4 channel is ignored

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 26 type of device = DISK

  channel ORA_DISK_1: from additional data file from the restore backup set

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  destination for the restoration of the data file 00001: /u01/app/oracle/oradata/orastb/system01.dbf

  destination for the restoration of the data file 00003: /u01/app/oracle/oradata/orastb/sysaux01.dbf

  destination for the restoration of the data file 00004: /u01/app/oracle/oradata/orastb/undotbs01.dbf

  destination for the restoration of the data file 00006: /u01/app/oracle/oradata/orastb/users01.dbf

  destination for the restoration of the data file 00057: /u01/app/oracle/oradata/orastb/myts01.dbf

  channel ORA_DISK_1: backup /u02/bkp/ORAPRIM_inc_3uqqkma0_1_1.bak piece reading

  channel ORA_DISK_1: room handle=/u02/bkp/ORAPRIM_inc_3uqqkma0_1_1.bak tag = TAG20160105T190016

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  Finished recover to 5 January 16

  Restored the controlfile and mounted the day before:

  RMAN > shutdown immediate

  dismounted database

  Instance Oracle to close

  RMAN > startup nomount

  connected to the database target (not started)

  Oracle instance started

  Total System Global Area 939495424 bytes

  Bytes of size 2295080 fixed

  348130008 variable size bytes

  583008256 of database buffers bytes

  Redo buffers 6062080 bytes

  RMAN > restore controlfile eve of ' / u02/ctl.ctl ';

  From 5 January 16 restore

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 20 type of device = DISK

  channel ORA_DISK_1: restore the control file

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  output file name=/u01/app/oracle/oradata/orastb/control01.ctl

  output file name=/u01/app/oracle/fast_recovery_area/orastb/control02.ctl

  Finished restore at 5 January 16

  RMAN > change the editing of the database;

  Statement processed

  output channel: ORA_DISK_1

  Now the data file does not exist on the standby mode:

  SYS @ orastb > alter database recover managed standby database disconnect;

  Database altered.

  SYS @ orastb > select the process, status, sequence # v$ managed_standby;

  STATUS OF PROCESS SEQUENCE #.

  --------- ------------ ----------

  CONNECTED ARCH 0

  CONNECTED ARCH 0

  CONNECTED ARCH 0

  ARCH. CLOSING 329

  RFS IDLE 0

  RFS IDLE 330

  RFS IDLE 0

  MRP0 APPLYING_LOG 330

  8 selected lines.

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  Hope that gives you a clear picture. You can use this to roll forward day before using the SNA roll forward Eve physical database using RMAN incremental backup | Shivananda Rao

  -Jonathan Rolland

• How Controlfile SNA remain synchronized after moving the database with the cold backup

  Hello DBAs,

  I doubt that:

  Every time you pass a cold backup database. We create a new controlfile with new locations of data/redologs etc.

  And then we execute "create controlfile reuse...". noresetlogs...; "to create the controlfile.

  After that, we will open the database as > > alter database open;

  Now the question is:

  We are able to open the database without clause "resetlogs.

  Here, we create a new controlfile so SNA to controlfile will not be synchronized with the SCN of the datafile and redo the file.

  Please let me know how the new controlfiles' SNA is synchronized with the data file and redofile and wea are able to open the database without resetlogs clause.

  Oracle: 11.2.0.4

  OS: Linux

  If your cold backup also includes online redo logs, a RESETLOGS is not necessary.

  The controlfile is created if it does not have a SNA, it reads the data file headers the YVERT database. For a cold backup, all the headers of data file are consistent.  (This is also the reason why a RECOVERY is not required).

  Hemant K Collette

• Need help with the automatic backup feature - please!

  Hello

  I recently started a flash animation and the AutoSave feature is enabled.  I got a good animation, but decided to play a little with it.  After a few moments, I decided to call one night and you exit the program ensuring NOT to save my work.  When you open this file the next time, I just found out that Flash has my file saved automatically while I was playing.  Now I have an animation worthless and have to start over again.  Is it possible to go back to an earlier backup or AutoSave at this point or I am about to do a lot of work again?

  Thanks to all who can help.

  As far as I know, the auto save feature is not able to track down the previous versions of the document being saved - that calls for a specified version control system. I think that Flash saves the file only if it is requested to the. There are several ways to enable or disable auto-save:

  1. in the dialog "new Document." You can choose to activate the automatic backup.
  2. In the "Properties of the Document" dialog box, you can set the check mark.

  If these are true, it will not happen of any economy car. The problem may be, there is also a section called ASR. Backup and recovery is not the same when it comes to Flash, but people tend to consider the same. You set the AutoRecover feature in preferences under general.

  • Windows: Edit > Preferences: general > auto salvage
  • Mac OS: Flash Professional > preferences: general > auto salvage

  Both has a default value of 10 minutes and it can confuse the user. Please see the document to make sure, that you have not disconnected ASR instead of the Auto-Save. You can do this:

  1. Go to preferences (Ctrl + U on Windows, and command + U on Mac OS) and check if the automatic recovery is set.
  2. Go to the properties of documents (Ctrl + Windows and cmd + D on Mac OS) and check if the Auto-Save is set.

  The first (in preferences) is ok to have fixed. It is the second, which could have caused problems for you.

  /Ockley

• Impossible to create a point of restoration with the error message "task Mgr is damaged or has been tampered with. 0 x 80041321 ".

  Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic

  I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem

  Hello
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
   
  
  Please follow the methods and mark the question below:
   
   
  Method 1:
   
   
  I suggest you try the steps mentioned below.

  Steps to re-create the Task Scheduler:

   
  a. Click Start; in the start search type regedit.exe and press ENTER.

  If you receive a consent prompt, click Yes.

  b. navigate to the following location.

  HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.

  c. save the changes and then close the registry editor.

  Now check if the Task Scheduler works.
   
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  
   
   
  Method 2:
   
   
  Step 1:
   
   
  I first suggest you to check if the Volume Shadow Copy service is running.

  a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.

  b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.

  c. If it is stopped, select start or restart.

  Check if you can try to create restore points after starting the service

   
  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Step 2:

   
  If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.
   
   
  Disable the antivirus software:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 3:
   
   
   
  You can also try to remove the job from the location:

  C:\Windows\System32\Tasks

   
   
  How to find which task is damaged or altered.

  a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
  b. now run the following command

  schtasks/query | findstr /i

  Search

  ERROR: The task image is corrupt or has been tampered with.
  ERROR: Task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  
  a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. the component shares of the Scheduler dialog box, click on create a task and check.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Re: Satellite P300 - conflict with the display driver

  Yesterday, I suddenly had a conflict with my display driver. While working on my laptop, a blue screen appeared and then the screen went black and stayed like that. When you use an external monitor, it is possible to start in SafeMode (in normal mode, a blue screen appears). It is possible that a Windows Update has occurred, but I can nog
  cancel anything (no Windows recovery point).

  I uninstalled the display driver and downloaded the latest version, but it doesn't seem to help. Reinstalling Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).

  Does anyone knows how to fix this?

  Kind regards
  Jeroen

  Hey Buddy,

  > Reinstall Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).
  What Windows disk, you used exactly?
  Normally before starting with the installation of Windows, you must format the hard disk and create partitions. If everything is clean at the disk Windows installation starts.

  I advise to use the Toshiba recovery disc. This disk can restore the original settings of the case and before Installation starts the drive HARD to wipe completely.

• Receive "the IP is in conflict with the WAN IP subnet" when changes of LAN

  Hello

  I have the following features:

  ProSafe FVS336Gv3
  Router R6300v2

  The static IP setting for the LAN on the Prosafe is 192.168.1.1/255.255.255.0
  The static IP setting for the router WAN is 192.168.1.101/255.255.255.0
  The static IP setting for the router's local network is 10.9.8.1/255.255.255.0

  The settings of the router LAN, if I try to disable the DHCP server, I get the message:

  The IP address with the IP WAN subnet conflicts. Please enter a different IP address.

  Any ideas?

  Please notify.

  Have a great day,

  Don

  Eventually be a DNS setting on the WAN port on the router.