Problems with the interrupted backup

Similar Questions

• Problem with the PC Backup on the external DRIVE on the network drive home.

  I made backups of my laptop wirelessly through my router to my connecting external hard drive attached to my desktop, when I used Microsoft OneCare. Since then, OneCare is being abandoned, I decided to go to the basics of Microsoft (MS). Unfortunately, Ms Essentials doesn't have the features of OneCare. I try to perform a backup using the backup and Restore Center, however, I get an error message when I put backup settings to location network - error code: 0 x 80070534, no mapping between account names and security IDS was done... the results. Is there a KB or a fix for this problem? I've looked everywhere for answers and keep looking, however, I have found no solid solution (especially scams, i.e. pc scanners and fixers of registry error). How is it that I could make a backup without problem with OneCare (that I have no more:{{class=fontblue}} {.}) Now I try to do through the Center backup and restore, the backup does not work! It makes no sense at all!  I have Windows OS: Vista Home Premium 32-bit 2 Gb RAM SP2; HARD drive external: Maxtor 3200 (320Gb) hdd personal

  Thanks, I found the problem. I had to uncheck the ReadOnly property on the folder that I traced to use for my backup location on my HARD drive. In truth, the property read-only (checkbox) is not checked, it is filled (designates the system setting) with a green square in the box (on my Windows XP desktop). I'm sure that others have missed this little nuisance. It's cheating. I don't know how many times I looked at the folder that I use for my backups, forget to realize that the ReadOnly is the default setting for the file. I no longer get the error message: 0 x 80070534, no mapping between account names and security IDS was done. I can't believe it's just as simple as that! My backups work fine.

  Karena, R, thank you for your time and help in any way.

• Problems with the one backup. MSWMM file to. WMV

  I get the error "cannot complete film Assistant record" when you try to save a. MSWMM file to. WMV. any ideas? It starts to save the file, and then after a few minutes, I get the error. A lot of space on the hard disk.

  O, I just used first place. I think the source files were too big (100 MB) so the final product was too big for WMM to manage. Thanks in any case! xDDD

• Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

  Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

  Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

  Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

  Hi Phil,

  Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  2. have you updated to Service Pack 2 installed?

  3. don't you make changes to the computer before this problem?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

  Method 2.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

  Additional information.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Problem with the backup

  Hi people,
  I have a problem during the automatic backup via GC.
  Here, follow-up of the EMAGENT newspaper. TRC, the Oracle RDBMS version is 11.1.0.7.0
  
  Any suggestion?
  Thanks in advance
  
  
  SQL = "OCIServerAttach '...
  LOGIN = dbsnmp / < PW > @(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dborasvil.company.local) (PORT = 1521)) (CONNECT_DATA = (SID = silsvil)))
  2009-01-12 02:01:30, 857 vpxoci wire-1119582528 ERROR: ORA-12505: TNS:listener is not currently of SID given in connect descriptor
  2009-01-12 02:01:30, 857 recvlets.aq wire-1119582528 WARNING: [oracle_database silsvil.company.local] failed connection: ORA-12505: TNS:listener is not currently of SID given in connect descriptor
  2009-01-12 02:01:31, 614 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:31, 703 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:31, 789 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:31, 789 Thread-1129032000 ERROR upload: 3 failures in a row or an error XML for B0000033.xml, retcode = - 2, we give up
  2009-01-12 02:01:43, 887 upload Thread-1092811072 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:43, 973 upload Thread-1092811072 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:44, 060 upload Thread-1092811072 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:44, 060 Thread-1092811072 ERROR upload: 3 failures in a row or an error XML for B0000033.xml, retcode = - 2, we give up
  2009-01-12 02:01:44, 146 ERROR Thread-1129032000 pingManager: nmepm_pingReposURL: has not received a response from the repository header
  2009-01-12 02:01:44, 231 ERROR Thread-1129032000 pingManager: nmepm_pingReposURL: has not received a response from the repository header
  2009-01-12 02:01:46, 330 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:46, 418 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:46, 504 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:01:46, 504 ERROR Thread-1129032000 upload: 3 failures in a row or an error XML for B0000033.xml, retcode = - 2, we give up
  2009-01-12 02:02:01, 609 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:01, 697 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:01, 784 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:01, 784 Thread-1129032000 ERROR upload: 3 failures in a row or an error XML for B0000033.xml, retcode = - 2, we give up
  2009-01-12 02:02:13, 887 upload Thread-1092811072 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:13, 987 upload Thread-1092811072 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:14, 075 upload Thread-1092811072 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:14, 075 Thread-1092811072 ERROR upload: 3 failures in a row or an error XML for B0000033.xml, retcode = - 2, we give up
  2009-01-12 02:02:14, 164 ERROR Thread-1129032000 pingManager: nmepm_pingReposURL: has not received a response from the repository header
  2009-01-12 02:02:14, 249 ERROR Thread-1129032000 pingManager: nmepm_pingReposURL: has not received a response from the repository header
  2009-01-12 02:02:16, 349 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:16, 436 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:16, 522 upload Thread-1129032000 ERROR: cannot download the file B0000033.xml: HTTP error.
  2009-01-12 02:02:16, 522 Thread-1129032000 ERROR upload: 3 failures in a row or an error XML for B0000033.xml, retcode = - 2, we give up
  2009-01-12 02:02:30, 862 vpxoci wire-1119582528 ALERT: OCI error - ErrorCode (12505): ORA-12505: TNS:listener is not currently of SID given in connect descriptor
  
  Edited by: Seek78 to 10,20 gen-13-2009

  Hello
  WHO is secure? the agent has been installed with the password?

  try to uninstall the agent and re-install.

  Can the network server and the target ping each other server?

  When you checked the agent where you you connected grid as sysman/system control?

  concerning

  Alan

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problems with the battery drain on iPhone 6

  Hello! This is my first time posting but I had some problems lately with my iPhone while keeping a charge.

  So, this has started to happen a month ago (exactly one year after I bought my iPhone) and my battery drains just exponentially and evacuates it sometimes when I'm not using it and the internet is not on. For example I'll fully my phone until I fall asleep and I'll put it on airplane mode before going to sleep. By the time I wake up, the battery will be down to 60%. I do not use it during this time, I don't get notifications because all data and the internet is disabled. I do not understand why it is empty.

  Anyway, I've taken to the Apple store Genius bar twice now and they have not been able to fix it. They have tried to restore it... I did that before I went to the Apple store, but they decided to do it again and the second time the guy just told me to turn off all the background app refresh or anything I did but it we continue to attract.

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark. It's so boring, but if anyone else has had a similar situation for advice or assistance would be greatly appreciated.

  a4annalisa wrote:

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark.

  Yes that is exactly what they are trying to avoid. As you explained that you have visited it there twice to attempt to solve this problem, they could have offered to replace your battery for $79 that with your current battery showing 94% of its original capacity, that would not have done much for you at all.

  Have you been having problems with the reception of your carrier recently, when all this started happening? Were you see 1 or 2 points of service when you used to see 3 or 4? When you have restored your iPhone, you restore it as a new iPhone or restore a backup top later? Just try to refine some possibilities for the continuous emission.

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Problem with the module "Automation" in WindowsAzure

  Top: Problems with the module used "Automation" service "WindowsAzure.

  Hello!

  I really need your help to decide my problem of "Azure Automation". My boss has set a task for the 'Automation' module allows you to make a backup of Virtual Machines.

  To understand my problem, I do the next:

  1. describe the situation of all;

  2. describe the problems that appear in this situation;

  3. my conclusions.

  In addition, I am attaching the necessary information: my PS-scripts (from Windows and the automation of azure), log (with my notes) and screenshots (images with my notes) see file .rar Add_info (annex).

  1 description any situation

  For our development projects, we have several Virtual Machines on service cloud "WindowsAzure. We need to make backups of discs with Virtual Machines each week. Earlier, for this task, I used Windows PowerShell on my computer and my PS-script (see Ann 0 - VM (backup) of the WPS_snapshot). I created a new storage 'backupstor' and containing 'snaps-drive '. When I run PS-script with my computer, I have backup of disks virtual Machin in the container "snaps-disk", without problem.

  Now I have a new task "automatically make the process of creating backup of Virtual Machines (VM snapshots). I tried to use automation module (overview). Can I change my PS script for the 'Automation' module and create folders (see Ann 1 - records (make backups of virtual machines) _Azure_Automation).

  I need to make a backup of Virtual Machine 'bosard' in the cloud 'cloudnet. "Bosard" on the disc size ~ approximately 90 000 000 000 bytes (total size of the default drive size 127 GB/136 367 309 312 bytes)

  2. description of the problems that appear in this situation

  My steps:

  1. I start files to make a backup of Virtual Machine disk (see annex 1 - files (make backups of virtual machines) _Azure_Automation))

  2. it starts successfully and generate the name of backup 1 (blob) - snapshot-bosard - osdisk_07.10.2014_07h00m39s.vhd (see image 1 - start copy backup 1 and annex 2 - log file copy process)

  3. the process of backup copy 1 (blob) will...

  Problem 1:

  4. the process of backup copy 1 (see Appendix 2 - process log file copy) automatically stops and complete to copy the part 1/3 bytes copied 28311552000only. Important: The size of my virtual machine disk ~ on 90 000 000 000 bytes.  (Maximum possible) of total capacity of the disk where the Virtual Machine is used - 136 367 309 312 (127 GB). (See picture 2 - stop backup copy 1)

  5. I have Virtual size 1 backup - 28311552000bytes, when the size of my VM - 90 000 000 000 / 136 367 309 312 bytes.

  Problem 2:

  6. after the termination of the process automatically makes copy backup 1, records (see annex 1 - files (make backups of virtual machines) _Azure_Automation) automatically start (see picture 2 - stop backup copy 1) and folders automatically create new snapshot Backup 2 - name - bosard - osdisk_07.10.2014_07h31m33s.vhd (see annex 2 - process log file copy, image 3 - stop the copy backup 1 & Begin copy backup 2 and 5 - backupStore_Azure (process)of image)

  7. I pressed "stop" and stopped the process of copy and folders (picture 4 - I stopped the process of creating backup 2 & records). And how result I had size Backup 1 and 2 = 0 bytes (see image 6 - backupStore_Azure (I order records))

  Note:

  1 problem 1: the process of backup of virtual machine does not complete and stops automatically.

  2 problem 2: the process of creating new second backup starts automatically. And as a result, we do not have the backup of virtual machine, when I use the 'Automation '.

  3. my conclusions

  I think that:

  1. my PS script for Automation (files) is not correctly. Then I need your help, how to fix this.

  2 may be the module "Automation" is not working correctly. And the module 'Automation' needs repairs and settings.

  In addition, I am attaching the necessary information (see the Add_info (annex) .rar file):

  Ann WPS_snapshot 0 - VM (backup)

  Ann 1 - records (make backups of virtual machines) _Azure_Automation

  Ann 2 - log file copy process

  image 1 - start the copy backup 1

  image 2 - stop copy backup 1

  image 3 - stop copy backup 1 & Begin copy backup 2

  4. I stopped the image create backup processes 2 & records

  image 5 - backupStore_Azure (process)

  image 6 - backupStore_Azure (I order records)

  Thank you

  Kind regards

  Mikhail

  Hello

  You can get the assisted support from the following link on this point:.

  http://azure.Microsoft.com/en-us/support/options/

• Problems with the resource of labview execution 2 visa

  I use two loops in a labview code all-in - connects to a motor controller and other is used to connect to a multimeter agilent. As soon as I run this VI, the loop to connect to the controller stop working and only used to configure agilent machine works. If I remove the second loop (connecting to the computer of agilent), the code works fine. I guess it's a problem with the execution priority. Could you please review the attached code and let me know any problems with it.

  COM1 and Com3 share an interruption.

  Go to the BIOS of the computer and set the port to Com3 to the Com2 port, then they will be on their own interrupt and see if that helps.

  FYI

  COM1 and Com3 share IRQ3

  COM2 and Com4 share IRQ4

• Problems with the sound on my PC (i.e., no noise at all). m ' said that the Sndvol32.exe file is missing

  I have problems with the sound on my PC (i.e., no noise at all).  He told me that the Sndvol32.exe file is missing.  I went through the 'fix - it' and the solution is to extract the file from the Windows XP CD.  My PC did not come with it - otherwise, how can I get this file?  Thanks in advance!

  Most of the people do not have a genuine XP bootable CD.   This is good advice if you have a true bootbale CD, but given that the majority of people have never seen one in their life, why start there?  That's why this kind of troubleshooting tips kill me...

  The fix it will not help you.

  This will help you:

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  Of course the file must never be missing, so something has badly haywire.

  If the system is working properly, what do you think has happened since the last time, that he did not work properly?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for the antivirus/antimalware protection, I followed with some other respectable malware scanners, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

  No operating system

  Hello

  I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

  Would it not possible to obtain another copy of the operating system for that computer?

  All the best

  Dean

  Hello

  These are forums for Vista, so vista information is provided

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Everyone has a problem with the Windows Explorer permanently closing?

  * Original title: Windows Explorer

  Everyone knows about a problem with the Windows Explorer (not Internet Explorer) without interruption closing? It is not fair on 1 computer, I have 2 desktops and 2 laptops, and it does on 4 of them. They are all running Windows 7, (1 to the publishing house, 1A Ultimate and 2 Professional).  I can right click on something, even on the desktop, and most of the time, I get a message that Windows Explorer has stopped and the ability to close or wait for it to respond. I have normally not 30 minutes or more to wait so that he could respond and if I close it, then it does nothing. I've done all updates are recommended for all my computers, I did the defragmentation, disk check, etc and it still continues. I need help, please. I am so sick and tired of what I am about to go to a Mac and I don't like Mac computers, but said there is much less of a problem.

  You have loaded all 3rd party "Add-ons" in common to all PC? For example (this is an old post Vista but gives the general idea) - http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/windows-explorer-crashes-on-right-click/719385e6-fff5-498d-807c-103bf0344f44?page=1&tm=1423414000974 and see Ramesh respond.

  If not, is there clues in the log of events (errors) in common on all computers where the crash?

• Problem with the disk free space.

  I use the power of fire 7100 (the 5.3.0.3 Version of FireSight 5.4.1.7 sensor Version). I have political problems that apply to the device. And is unable to update sensor for the newest version. Cisco support community help me! Thank you! They and I think that this problem can be in the use of the disk.

  What I oh sensor:

  Size of filesystem used Avail use % mounted on
  / dev/sda5 2.9 G 562 M 2.2 G 21%.
  / dev/sda1 99M 37 M 58M 39% / Boot
  / dev/sda7 67 67 G 0 100% but
  No 1.9 G 136 K 1.9 G 1% / dev/shm

  May be the problem with the records of Volume.What I could check and delete? Thank you!

  Hello team,

  * Could you please check the following points: -.

  CD/var/tmp /.

  du-sh *.

  You can clear the/var/tmp/en using the following. Files under/var/tmp temporary files are. :-

  rm - rf *.

  It is a known bug where the but gets completely due to Apply_ files *.

  * Also check the following points: -.

  CD/var/sf/updates

  Remove the old patches if there are.

  * Check the following backup folder and the folder of detection engine too.

  CD/var/sf/upgrade_backup

  du-sh *.

  CD/var/sf/detection_engines

  du-sh *.

  Rate if this helps you.

  Concerning

  Jetsy