Confused about the creation of a .db file for the first time in the property fodler

Similar Questions

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan

• Confused about the new creative cloud

  Hi all

  Since I read adout the new creative cloud I'm confused about what will happen to my license for Adobe Lightroom. Will they remain still desktop apps as well or I have to pay for an annual license, if I want to use new versions of Lightroom?

  I am a casual photographer and I like to use Lighroom for my photos, but I don't think that pay for an annual license because I'm not spending a lot of time, image-editing.

  Can someone clarify this for me?

  Thank you very much

  Lucian

  5 Lightroom does not have subscription only, you're fine. There is no sign that it will even happen in the foreseeable future either.  It's just the ex-Creative-Suite that all talk.

  Target market of Lightroom is different from the Creative Suite/Cloud. CC is a good deal for the majority of its base of users (next door), while the majority signed without major complaints.  Lightroom has a huge customer base amateur, and they would be much more difficult to convince us to go subscription only. They would be likely to lose most of customers of Lightroom at the moment, and they are not completely stupid.

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• What is the best product for a first time user of WORD PRESS to design a web page of writing-blogging?

  What is the best Acrobat product for a first time web page or blog page - very technical designer - to design a place to show the writing and blogging information?

  You can use these options for WP blog in Muse:

  http://musewidgets.com/search?q=WordPress

  Thank you

  Sanjit

• Confused about the capacity of the HARD drive on my new Equium L350

  I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.

  I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
  Any help would be appreciated.
  Thank you

  I agree with InvaderZim.

  But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.

  I assume you are using the Vista operating system.
  Vista uses hidden for some files from recovery partition.
  If you check the Disk Manager, and you should see all available on your HARD disk partitions.

  See you soon

• Confused about the new iPhone to load

  It seems that online, there are many variations on how to charge an iPhone the first times, we don't know what to believe.

  Historically, I charge my iPhone for a day the first time that I get it or after I got a refurb from Apple. My battery life has always been fantastic, representatives of engineering apply even told to say.

  This time, I couldn't wait to load the device as I normally would. I connected my iPhone to my PC, did a restore of backup and wait for the iPhone to be able to load completely (about 30 minutes).

  Given that I had a lot of things happens, I didn't have the opportunity to "condition" of the battery, charge of the day to the next, or as some reports say that I have to load it only via the provided OEM charger (not PC). Some say that your battery die completely and then get away after the phone two hours before recharging.

  All these 'new' information is downright confusing. And yet, I see Apple suggesting as a result a large part of these 'tips '.

  Any thoughts on pricing?

  There is no requirement to 'manage' load.

  Charge at any time, for any period of time.

  You can use the phone while charging.

  Don't deplete the battery at a low level.

  Another that these steps, no more measures need to be taken.

• Confusion about the requirements for the 2015 CC software

  I currently have Windows 8.0 (64 bit) which is so satisfactory and stable.  I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal.  So for now, I would stick with what I have.  But the problem is the confusing requirements for various programs within the pile of creative cloud applications:

  Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
  Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1

  Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows

  Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)

  So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are.  Does this mean Photoshop CC 2015 is not compatible with Windows 8?  And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock.  Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.

  Can someone clear up the confusion, please?

  I think that my hardware is OK for this.

  Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)

  CPU: AMD FX-6300 Vichera 3.5 GHz

  Memory: 16GB Kingston HyperX DDR3 2133 MHz

  Video: MSI N650-MD1GD5/OC GeForce 650MX

  Monitor: Acer S271HL of 27 "(1920 x 1080)"

  Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)

  HDD1: Western Digital 320 GB (System)

  HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)

  VidCap: Blackmagic intensity Pro HDMI

  USB hub: Rosewill RDCR-11005 5.25 "

  UPS: APC Back-UPS XS 1500

  Router: Netgear WNDR3700 N600

  System is NOT overclocked

  It is compatible but not tested.

• confused about the function of culture

  OK I've been using photoshop for a while but it has the function of culture changed?  My question is, when I crop a picture, even though I have crops on a very small section, the file remains the same size (pixel dimensions).  If an image is 60 m and I have very small crops, it remains 60 M and 5616 X 3200 pixel, for example.  I'm a bit confused by the present, I'm sure that when I have cultivated an image before it reduces when I cultures.  I hope that I myself make clear...

  any help appreciated.

  
  

• Confused about the location of TDE wallet!

  due to
  
  http://www.Oracle.com/technology/oramag/Oracle/05-Sep/o55security.html
  
  I guess to add the following lines to sqlnet.ora if I want to change the default location of the portfolio to the orawall folder:
  
  ----------------------------------------------------------------
  ENCRYPTION_WALLET_LOCATION =
  (SOURCE =
  (METHOD = file)
  (METHOD_DATA =
  (RÉPERTOIRE = / orawall)))
  ----------------------------------------------------------------
  
  I just confused of the last line that describe the path of the portfolio... I mean I do not understand where assumes that this location * / orawall * exist on my computer, why he wrote the full path?

  This is the full path to the wallet. I suppose that the example of Arup uses little flavor of Unix, it has no doubt created an ORAWALL directly from the root.

  You can store the wallet in any directory that you have chosen. Typically, you would choose $ORACLE_BASE/admin / $ORACLE_SID/portfolio. On my Windows machine where I have a database with the SID jcave11gr1, who would be

  ENCRYPTION_WALLET_LOCATION =
    (SOURCE =
      (METHOD = FILE)
      (METHOD_DATA =
        (DIRECTORY = c:/oracle/admin/jcave11gr1/wallet)
      )
    )
  

  Justin

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.

• Confused about the output of the command show vlan id

  I configured several VLANS on a switch. 3 VLANs, each assigned only one port. The output of the vlan see the brief shows me exactly what I expected:

  IOU1 #show vlan bis

  Ports of status for the name of VLAN
  ---- -------------------------------- --------- -------------------------------
  1 default active Et0/0, Et0/3, and1/3
  101 VLAN0101 active and 1/0
  102 VLAN0102 active and 1/1
  103 VLAN0103 active and 1/2
  1002 fddi-default law/unsup
  1003 token-ring-default law/unsup
  1004 default fddinet law/unsup
  1005 trnet default law/unsup

  But the confusion when I do a show vlan id for one of my VLAN it lists virtual local area network interface and then two other interfaces:

  IOU1 #show vlan id 102

  Ports of status for the name of VLAN
  ---- -------------------------------- --------- -------------------------------
  102 active VLAN0102 Et0/1, Et0/2, and 1/1

  Network type VLAN SAID MTU Parent RingNo BridgeNo Men BrdgMode Trans1 Trans2
  ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
  102 100102 1500 enet - 0 0

  Ports of secondary primary Type
  ------- --------- ----------------- ------------------------------------------

  Et0/1 and Et0/2 are trunks to two other switches. I don't understand why his list the trunk ports although I only expected to show and 1/1. Is the list these ports here because this vlan is connected via the ports of junction to the other switches? I don't know exactly what these two interfaces he said.

  I think that IOU and LIO behave this way. When you say true switch, on the platforms of nexus in my experience, they are same as what you have shown above as IOU.

  A switch as C3750, C3560, C3650, C3850 etc... they will out regular who you might be used to, i.e. not showing trunk interfaces in the release to id vlan.

  I hope this helps.

• Confused about the use of Fusion and boot directly to Windows via Bootcamp?  I thought that my installs would be synchronized?

  Recently, I installed Win 7 64 Ultimate using Bootcamp on my iMac 27 inches in 2010. It wasn't a problem. I then install Fusion 3.1 and import my install of Win 7 Bootcamp. Everything went well. I am using version VM to work related things which requires Windows and did not start directly into Windows for the first time, I installed and applied all the updates.

  Anyway, today I wanted to start Windows to the demo of a game. No much, that the installation of Windows seems work fine. But, I expected to see all applications and files installed there is just the way I did in the virtual machine. I thought they were basically the same facility and would be fully synchronized, but they are not.

  I'm doing something wrong or is it the way it is supposed to work?

  Is it possible to make two "versions" be the same whether in the machine virtual or kick directly?

  Because you 'imported' you see the expected behavior because an import is completely separate and apart and not linked to the original.

  On the other hand had you just clicked the button Start Up on Boot Camp entry into the library Virtual Machine, then you'd be using native installation as a VM.  However, a word of warning is in order that WPA (Windows Product Activation) can be problematic, Microsoft may require you to have two separate licenses and this is beyond the control of VMware when VMware Tools fails to control who after he activated in each environment.