Confused about the use of Fusion and boot directly to Windows via Bootcamp?  I thought that my installs would be synchronized?

Similar Questions

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Confused about the use of accessors with classes.

  With a new assignment thought, it would be appropriate to increase the use of labview OO features. In my case, I'm trying to use a class to contain a bunch of different calculations. The calculations require multiple entries to finish so I built a control to take care of these data. My plan was to build separate methods for each calculation. This will allow to easily add new calculations and considering that many calculations depend on preliminary calculations seem to be an excellent opportunity to learn a new part of labview.

  My problem is to find an elegant way to complete this great control; I believe that I must write accessor vi to allow outside access to the objects. I don't know if there should be one vi for EACH parameter accessor, or if I can access these items in a cluster.

  I can only relate to the use of get / set in .NET and usually I would write one for each variable that I have access to. I'm not sure how to proceed in LabView. Any ideas would be great.

  I enclose a few images. One showing just a sumple calculation and one of my ctl. Still, my main question is what is the best way to populate the items in this list.

  -Chris

  Since there is no such thing in LVOOP as public members of class (and thank God / NOR) you must always provide accessors (getters/setters) to join the data members of the class outside of the classroom.

  Inside the method of class VI, there is no need for them since you can reach directly from the wire with bundle/unbundle (like photos).

  I've implemented a similar class that performs calculations and I chose to use the recursive calls to deal with the problem of some variables must be calculated before the others.

  I'm a member of the VI class called GetCalculatedVariable.vi which takes the name of the variable to calculate input (like typedefed enum).
  Inside of this VI have a structure dealing with a box for each variable that can be calculated.

  The inside of the box, I define the calculation, and if I ever need another variable, I here call GetCalculatedVariable.vi recursively.

  In addition, I also have a CalcBuffer so I don't have to call GetCalculatedVariable.vi more than once for each variable.

  The class also has a GetMeasuredVariable.vi which also uses the recursion in the same way, but works on my measurement files instead.

  The advantage is that my application code gets very clean because it contains only a single Subvi callto obtain and use any calculated variable.

  I also have a GetCalculatedVariables that takes an VariableNames array and returns an array of values.

  I hope this helps...

• Confusion about the use of the tables [was: tables]

  I was told, at some point by someone, that the new web site design uses no tables. I'm so confused that I just read in the Help Guide of Dreamweaver Reference Guide, Chapter 5 page layout and Design, there is a whole section for tables. Many help sites, I was told that my site does not even because it is built in the tables. I built it using the ancient DW in 2002. I don't know which version, but the most recent version was Dreamweaver 4 back then. I am trying the trial of 2015, making many tutorials to learn the latest that has completely changed what I learned 14 years ago.

  So, what I can, or may not, use arrays? Please see the reference guide for DW 2015, 5 ml

  Thank you, Deb

  Oh, my site is mainemadestuff.com

  [Edited by moderator subject line]

  Dreamweaver reference Guide is desperately obsolete. Because Dreamweaver is now updated several times per year, new features have been added, but the old material has not been removed. For example, Chapter 5 contains 12 pages on executives. Dreamweaver can't stand frames.

  Advice than a website "shouldn't even work because it is built in the tables" are nonsense. Your site does not, and will continue to work for many years to come.

  The problem with the page layout using tables, it's that it is rigid. The content is not redistributed when the site is displayed on a mobile device. Tables is also bad for technology assistance for the blind. A blind person trying to access your site would have great difficulty of navigation on every page.

  Tables should be used these days for their original purpose: to display data, such as sports or statistical results in tables of trade. Modern web design uses CSS to control page layout and styles. But do not worry about your existing site stop suddenly work. Spend the time learning the latest techniques and reorganize your site when you feel more comfortable with CSS. But forget the so-called Dreamweaver reference Guide. It will be much more to enlighten confused them.

• Confusion about the use of the formula interpreter

  How can I rate a 4-bit input and output an integer value I need to map to a different value? I am to evaluate the following entries (4, 1 output):

  (((IN (0) AND IN (1)) AND (IN (2) AND IN (3)) = 13) <= we="" know="" that=""> 1111 b is 15decimal, but I need to translate the value 13 , so that it represents the index of a spreadsheet I'll be selecting with the sequencer.)

  I'm GOLD ' ing every possible combination of the 4 inputs and each combination should generate a value of 'special' I need to get out to represent the index that I need.

  The result of a comparison or logical operation (OR, AND, =, <> , etc.) is 0 (False, zero) or 1 (True, we).

  Change the formula for

  (IN (1), IN (0) AND IN (3) AND IN (2)) * 13

  In my limited testing, any value not zero entries will test to TRUE, if one is zero, then the output is zero, otherwise, the output is 13.

• Ask about the use of MAPEXCLUDE and the table of wildcards in REPLICAT

  Hello
  Would give advice on this
  
  I got a REPLICATE that is roughly configured as follows
  
  MAPEXCLUDE TARGET_SCHEMA. TABLE1:
  MAPEXCLUDE TARGET_SCHEMA. TABLE2
  MAPEXCLUDE TARGET_SCHEMA. TABLE 3
  MAPEXCLUDE TARGET_SCHEMA. TABLE 4
  
  CARD PINPAP. ------*, TARGET TARGET_SCHEMA. \ * ;
  
  However, the behavior I see in newspapers indicates
  only the wildcard is including the tables that have been expressly excluded in the MAPEXCLUDE
  
  This is the behavior expected of wildcards? or have I misunderstood how wildcards should be used?
  
  Published by: Tensai2000 on April 20, 2011 16:42

  You don't want to filter the source tables? MAPEXCLUDE should be on the tables of PINPAP, not the target tables.

• Question about the use of recovery disks Vista Bus on T500 with XP Pro downgraded

  I searched to see if this has been addressed already and I don't see anything about it. I also looked through the Lenovo support site and could not find any documentation with specific information, that I'm looking. So, if all goes well, the people here will have an idea.

  I have a T500 which was ordered with retired on WinXP Pro. It also came with a set of Vista Business (four discs) recovery disks. I plan to get my machine with Vista business records and down XP Pro, but I had a few questions.

  1. as it currently stands, I guess that the R & R partition that is on the HARD drive at this time restoring a WinXP Pro system if I start and get back with her. Is this correct?

  2. If I boot from the recovery disc Vista Business and use it for the recovery of the system, it creates a new partition 'Factory' R & R which would incorporate a Vista Business install?

  I may be wrong on my assumptions and even after the start of the R & R partition, it is really the recovery disks that I choose to use that would dictate if I found myself with a XP or Vista Bus. System.

  For what it's worth, I created a set of recovery disc R & R for the installation of WinXP Pro in case I need to revert to this version.

  I hope that my question is logical and that someone out there has an answer for me.

  Thanks in advance!

  jskang, welcome to the forum,

  Yes on both counts.

  Removal of all the hard drive recovery disks, create the service partition and then the system installs from the recovery with the flavor of windows partition, so that the discs are.

  It was a good idea to create the XP discs.

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• I get a warning about the use of an older version, even after the installation of v24.

  Several sites (including Mozilla) Internet gives me a warning about the use of an older version. I am currently on v24 and when I take the advice to be updated simply re - installed v24 yet again, but the expired message does not disappear!

  Thanks report, deleting the file user.js wasn't the first step - please also resets the user agent parameters as described in https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent and restart the browser.

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• What is the use of FPGAS and how it differs from the IO Modules

  Hi all

  Maybe it's a silly question for most of you.  But I have very less knowledge about the basic concepts of electronic (FPGA, real-time) to cRIOs. I know that FPGA

  can be used to generate circuits within the chip that helps by some logical functions.

  I've just started working in the cRIO.  My question is that we have Modules e/s making it outputs all the application entry.  So, what is the purpose of e/s in the FPGA.

  Lets consider that we entered for an application of RTD.  In this case the module NI 9217 itself exits 24 bits of data from the RTD measurement which may be the process of the LabVIEW VI.  What will be this FPGA between the i/o Modules and the processor will help in?  Also I want to know what type of communication is used to send data between the FPGA and host modules.

  Thanks in advance

  Ajay HI:

  Sorry, you do not have an answer to your original question. However, you are right about the benefits of the FPGA. You said, if you build pre-processing in the FPGA, you can unload a lot of potentially CPU calculations out of the host processor. In addition, the program running on the FPGA is highly deterministic and can run the code very quickly. So if you build a kind of guard or evanescent dog part of your application, the FPGA is a good place to put it.

  To answer your other questions, communication between the modules and the FPGA is generally above the SPI and the data can be transferred between the FPGA and host via DMA FIFO operating on the PCI bus or single point save access using read/write in the FPGA host Interface controls. You can also use interruptions in signal of disputes between the FPGA host.

  I hope this helps, but let us know if you have any other questions.

• Access to the use of memory and processing power charge connect 6224 via SNMP.

  Hi support them

  Is it possible to access the use of memory and processing power charge connect 6224 via SNMP? If possible, should the mib I use?

  Thanks in advance

  Rogerio

  When looking through the available MIB found in the zip file for download of the latest firmware.  I see that the MIB fastpathswitching mentions 'agentSwitchCpuProcessGroup '.

  MIB fastpathlogging has 'agentLogInMemoryConfigGroup '.

  There is no reference document material about what offer different MIB.

  I hope this helps.

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan