Confused about Windows 7 and vRanger connection

Similar Questions

• Hi, sorry for my English, my full authorized computers it s, number they say, I have to wait until Dec 12, everything you know about windows update and windows 10, it's a mess, I, lost master of my equipment, I wonder if anyone can helpme how to recover

  Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks

  also my purchases does not appear in the cloud, I have ' VM a very old usser

• I recently installed Windows 7 and you connect via RDP.

  * Original title: activation of Aero?

  Hi, I recently installed Windows 7 and you connect via RDP. When I plugged in, I was greeted with Standard Windows, I went in tge customization panel but when I click on an aero theme, said that some parts of the theme have been disabled because I was using remote desktop. Is there a way I can enable Aero via Remote Desktop?

  Aero feature is disabled in all versions except versions ultimate and Enterprise

  Aero glass remoting

  https://en.Wikipedia.org/wiki/Windows_7_editions#Comparison_chart

• Unusual problem and confusion with Windows 7 and Dropbox

  It is an unusual problem and confusion between Windows 7 and Dropbox. Here are the main elements of the problem.

  1. the dropbox on my PC Windows 7 folder contains a folder named Desktop which contains the same data files and records as the normal desktop folder in Windows 7.

  2. we know do not how the desktop folder got in the Dropbox folder. It was certainly not the intention, so I want to get rid of it.

  3. the desktop to Dropbox folder is the owner or the folder Desktop PCs (see screenshot). Sist icon desktop folder in the desktop in Dropbox folder icon.

  4. as a result, delete a file or a folder in the desktop in Dropbox folder also deletes this file or folder in the folder of desktop PCs.

  5. If the desktop folder in the Dropbox folder is removed, and then click the folder of the Office on the PC, an error message appears indicating that the Office file is not found and that there the path is:

  C:\Users\Chris\Dropbox\Desktop (see screenshot). This suggests that the folder Desktop PCs is a 'child' of the desktop folder in Dropbox.

  

  6 restore the desktop folder in Dropbox makes the Desktop PCs accessible folder again.

  7. the PC been temporarily separated from my dot com Dropbox account.

  Please notify. Sincere thanks, Chris.

  Hello!

  Please follow the procedure described here: http://www.sevenforums.com/tutorials/18583-user-folders-restore-default-location.html

  Hope this is useful.

  See you soon
  Julia

• Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Support for the Nikon D750 was introduced in the last version of LR 5.7 and ACR 8.7 Novemder 18 2014.

  New updates for LR 4 were arrested when LR 5 was released on June 9, 2013. No other updates of bug fixes and new camera support.

  Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced on the market in September 2014 some 15 months after further development of LR 4 was arrested.

  You can use the Adobe DNG (free download for packing) program to convert your Nikon D750 Nef (raw) files in Adobe's DNG format which will allow you to import those into LR 4. This is the crutch provided by Adobe to allow the processing of raw files with versions out-of-date LR and ACR.

  You can also update the ACR for PS CS6 version 8.7 plugin that can also work with the raw files of the D750. For direct support in Lightroom, you will need to upgrade (paying) to version 5.7.

• Confused about autonomous OBIEE and OBIEE integrated this two Architecture

  Hello
  
  I'm confuse about autonomous OBIEE and OBIEE integrated this model two...
  
  Are these two situation based on the same application (and then after that install US based on the standalone OBIEE, BI applications it become integrated model)
  
  or are they two separate applications but integrated OBIEE this model can support BI applications?
  
  Kind regards
  
  Anne

  Hi Anne,.

  It's the difference,

  Autonomous OBIEE - has no any solution of BI preconstruitse, we build the solution based on our requirement with the suite of products.

  Integrated OBIEE or OBI Apps - are built on standalone. It provides this stand-alone version features all, moreover, it has predefined solutions.

  Rgds,
  DpKa

• Windows Firewall and internet connection failure

  My Wi-wired connections and no longer work. My window firewall won't start. I now have a message to "svchost.exe. startuo - Application error The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read" "Any ideas how to solve this problem?

  Hello

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems like you get an error message "svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be read. I'll be happy to help you with this problem.

  (1) when exactly you receive this error message?

  (2) have you made changes on the computer before this problem?

  I suggest you follow the steps to disable Windows Driver Foundation - User - mode Driver Framework and check if it works.

  (a) click Start and select run.

  (b) type services.msc and press enter.

  (c) search for Windows Driver Foundation - User - mode Driver Framework serviceright click Choose Properties in the Startup type and then select disabled.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Have windows 8 and cannot connect my 710 Lumia

  I have upgraded to Windows 8, and although my Nokia Lumia 710 (Windows Phone 7.5) appears on the list of devices multimedia multi in printers and devices, but to try Media Player it only allows me to synchronize the device.

  Hi Tom,

  Thank you for visiting Microsoft Community.

  You get the error message? If Yes, what is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-in/Windows-8/set-up-device-sync-media-player

  Let us know if it helps.

  Thank you.

• Question about windows theme and display of Web pages

  I have everything, I'm new here, I've had my laptop for about 8 months, but it was stored for the 6 months, so he had only 3 months of use, and that was 99% for watching movies as was my laptop backup (my girlfriends, which was never used)...
  Well I just got my laptop storage and started using it again as I want now to do that my main work computer, it's a Satellite A100 Series. Running Win XP Pro SP2. Well, now I used it for about 1 week now and this is a fantastic computer, expecially the swipe away feature, I'm usually one XP Home Edition, but I do with Pro, just did not have any experience with it...

  Now, here's the problem, and this has always been the problem since bought, when we first bought it and connected to the internet with IE7 fonts have been massive, I figured out how to fix this in the display after a few hours to play settings and also noticed Web pages if there is a background image, it does not appear... (I also found this week is the same for any application on the PC that uses a Web page as Set up, or something, just sectain things... as I open the Security Center in the control panel and everything is white, and background images aren't there (which is white) and even corners which are background pictures are not displayed and comparing to) my other computer, there should be a green and red, background color etc.
  With Windows Media Player buttons should be as purple and black in WMP11, and they like a white background style html on buttons with links to them at the top and playback, stop, etc buttons have a back outside and the inside is white...

  Basically what I'm saying, is that she appears not CSS style WC3 content on some pages and applications on the laptop, and with regard to Web pages that they are exactly the same, I tried IE7, FireFox, front Browser, and still, the only one that displays pages almost as it should is Opera 9.2, but I really need to solve this problem... it is something simple to do with display obioussly , or settings, but I have tried literally every single different way of doing things last week, tried everything in the Control Panel, all toools Toshiba and no results.

  I'm not a beginner, or whatever it is, I can't get this problem, I can't even think of a setting that would do this let alone in trying to resolve this... I have all the Windows updates (although as I said, he did this from the first day of purchase)...

  If I could post a screenhot here I could show you... what Web pages look like in IE7 and FireFox and before (the only difference is Internet Explorer pages is mostly gray and firefox is white, gray is also.)

  Another question, when I was messing with the settings in the Control Panel, under Performace I changed it to something like 'make optimal display for performace' rather than 'Best to display' and it is then my control panel simple with a white background, and everything is not how I'm used, even the categories are made for each section , they are just all grouped together here, and my house Windows on my other laptop is positioned like this, but it at least has a sidebar on the left with a button to change it back...
  now I am at a loss to find the Performace button, as it is there is more, and I want to change it to 'show better for display' not the persomance... so if someone knows how to do this, please let me know... I took a screenshot of my control panel... and it's not naked, I use the Zune Windows (the black buttons and backgrounds theme ), so he used to be a gray background with a status bar on the side with all the links and details dark just like folders etc... So yes, it is another thing that I want to fix.

  Also I do not have the CD to fix it, not more that I think that she needs, but I have a standard out of the box disk Win Xp Pro, I was seriusosly do a fresh install, but I know I'll lose all modules of toshiba and all the extras that it is came up with, that's the only reason for which I don't have as it has Protector Suite QL, that I would have to pay to settle down to do a cleanup, and I really want to do because there is obviously something missing, its as simple as that, there is nothing wrong with the system it is just not set up correctly.

  Here are some screenshots of how I see Web pages, my Security Center Page and my control panel because I messed up he do "Get the best performace of" upward and the screen turned to the basic white and half things in the control panel is now missing, it has been setup in the previous categories... ahhhhh When I try to solve the original problem, I've done another...

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_01-1.jpg

  {It is the Security Center screen when I click in the Panel, that was before I did it fade)

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_02Sep3021.54.jpg

  ("it's now my control panel once I went in ' Premformance and display ' (I think. it was certainly performace in the name of the category)... and I changed a parameter of performance and display which actually use less resources... now I can't change it back, as the button performace is no more :())

  Thanks for reading and I hope although there, can anyone help me cos I hate having to do a fresh install on something as small as this, it is not many programs Add on on my laptop, as I said, it has probably beeen used 20 times ever, and especially for watching movies up to 1 week where it sat in storage for 6 months ago ,,

  Any help would be greatly appreciated... I tried all the Options of the Internet, all the Display Options, all variants, I need something specific, it is not only perform the internet, but the global programs with html style links, etc. and certainly CSS style sheets and the background image in the HTML feature.

  Thanks in advance.

  Hi Jay

  Very impressive display! I can see after 4 days, nobody wrote anything to give you the solution for your problem. I read your announcement with a lot of attention and I have to say that it was not easy to figure out your problem exactly (perhaps because English is not my native language).

  I know very well that new OS install is radical and last solution but I recommend you to check some forums Microsoft WXP because issue described is, in my opinion, more for OS forums for Toshiba forum.

  If you display the same thing in forum Microsoft please post the link, and we can follow the discussion here.

  I wish you good luck and I hope you will find answers soon.

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• confused about downloading messages and synchronization

  I'm new to TB - in the past, I always used a simple web interface. My server is on a server (Dreamhost) IMAP

  I read "Options of Configuration for Messages to download" page, but either do not understand or it does not give enough detail.

  I want to download all my messages stored on my server for my laptop, not only the headers. I want to retain the existing configuration of file I have on my server. I don't want TB never remove any message unless I tell it to do, preferably with confirmation.

  My goal is to download all my currently stored electronic records, and then once I know that they are safe on my hard drive I'll selectively delete them from the server.

  I do not understand how TB do this. It seems it only downloads the headers, and I don't see how to download the entire message. In addition, I don't want to quite what I think considers synchronization - if I delete a message on the server I don't want necessarily TB to remove this message locally. Otherwise, how could I check my messages locally?

  in other words, I want that all my messages stored locally, and only some of them left on the server.

  For example, I put three emails in a folder on my server. I left who
  connection, then call Icedove on my laptop. If I click on this file, it
  then retrieves and displays these three emails (or only the headers?).

  If I leave Icedove in my web based e-mail and delete these
  three emails from the server, I would expect these three emails to stay on my
  local computer. Yet when I invoke Icedove once again, he sees three emails are
  disappeared from the server and subsequently removed from the display.

  So, this means that the messages were never really recovered
  locally? Or Icedove Deletes local copies to synchronize
  with the server?

  Here are the settings I use:

  under "Copies & folders"-> archives message keep in: "archive folder".
  "On": local folders.

  under 'Synchronization & Storage'-> 'Message synchronization'-> keep
  messages for this account on this machine. I have all the files audited
  under "Advanced".

  under "Disk space"-> synchronize all messages regardless of age. And
  'Do not delete all messages '. It does not give me an option to not use
  synchronization.

  Thanks if you can help.
  Keith

  Matt-thanks a lot!

  Your info really helped. This is what worked for me:

  Right-click local folders, and then create local folders to match those on the server.

  All folder to online server, select, ctrl + A to select all of the messages, right-click for the drop-down menu "copy", then copy them in desired local folder.

  Once I did, I also went through the selected server files, ctrl + A to select all, then click on "Archive", which offers the mail on the server in the Archive, sorted by date of the year. It was scary at first because I didn't know they would not display until after Icedove has restarted! United Nations-Linux very like, but I think not uncommon in the world of Windows.

  So I found myself with two copies of most of my mail - in a local folder and the other in the Archives. What is good for a few MB of messages I have.

  I will mark this as resolved issue.

  Thanks again!
  Keith Ostertag

• Satellite L450D: Windows 7 and Netgear connection problems

  Hello

  Ive recently bought a Toshiba Satellite L450D but I can't connect to a netgear wireless account...
  It works fine on another laptop and my toshiba can connect to an account of different eircom without problem...

  What is the new Windows 7, which is not compatible with the server or do I have another problem!

  Thank you! :)

  Hello

  What you mean with Netgear wireless account exactly? Do you mean the router Netgear WLAN?

  Normally, you can connect to each WLAN router. It makes no difference which manufacturing, you have the router but factory settings are different, this means that some routers have DHCP and static IP addresses, for example. I think you should check the TCP/IP configuration and update the WLAN driver.

  Check for an update WLAN Portal: http://aps2.toshiba-tro.de/wlan/

  Good luck! :)

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• I unchecked the "notify me when this connection is limited or no connectivity" for my windows wireless and LAN connections, but the icons still appear in sys tray when it is disconnected.

  Hello

  I use my Intel client to manage my wireless network connection in Windows XP Pro SP3. (I need to use the Intel client because it supports protocols wireless not supported by the Windows client).

  I would like to remove the icon from the system tray/notification area Windows wireless network connection and cannot find a way to do it.

  I opened the network connections, right click and choose 'properties' and in the general tab at the bottom there are two check boxes "Show icon in notification area when connected" and "notify me when this connection is limited or not connectivity ' which I disabled (I did it for my local network also), but the icons still appear in the status bar when it is disconnected.

  
  Any suggestions?

  Thank you

  Bob

  I found a registry change that removes the icon in the systray.  One needs only to remove these keys (save the first):

  [HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E}]

  [\DefaultIcon HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E}]

  [HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E} \InProcServer32]

• Reinstalled windows vista and cannot connect to the internet.

  OK, so I have problems with my computer (model Emachine) and ended up having to reinstall windows vista. Windows works fine, even if I can't connect to the internet, because it does not recognize my modem, or my modem is suddenly not there. I am also running switched. If I have to download a driver, so I have to be online to do, so I'm in a catch 22. with little money and no way to get there.

  I really need this computer to work, so any help would be appreciated.

  Read my response: download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  You should be able to download/save files and copy them.

  http://www.eMachines.com/support/drivers.html

  For any further information, reinstall the drivers, contact the manufacturer of your computer to the link above.

  Mick Murphy - Microsoft partner