Satellite L450D: Windows 7 and Netgear connection problems

Similar Questions

• I recently installed Windows 7 and you connect via RDP.

  * Original title: activation of Aero?

  Hi, I recently installed Windows 7 and you connect via RDP. When I plugged in, I was greeted with Standard Windows, I went in tge customization panel but when I click on an aero theme, said that some parts of the theme have been disabled because I was using remote desktop. Is there a way I can enable Aero via Remote Desktop?

  Aero feature is disabled in all versions except versions ultimate and Enterprise

  Aero glass remoting

  https://en.Wikipedia.org/wiki/Windows_7_editions#Comparison_chart

• Windows XP and intermittent connectivity of Toshiba Satellite problems

  Our Toshiba Satellite will not maintain its wireless connection. This will work for a while then drop off, sometimes it will come back again, and sometimes it won't.
  Sometimes it shows that it is connected and the signal strength is excellent, sometimes it will show that the wireless network has limited or no connectivity. All other PC and laptop computers work properly in the rest of our House using the same wireless connection.

  Does anyone have an idea of what might happen, it doesn't make sense to me.

  More information would be interesting to know if you wait for help... What do you think?

  You should put what model of laptop you have exactly, Toshiba Satellite said nothing. ;)

  Anyway, if you have wireless issues there s always advisable to update the WLAN driver. The latest version can be downloaded from the Toshiba page:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?

• Satellite P100 - 347 (PSPA6) and Conexant audio problem in Windows 7 64 bit

  He is a [old problem | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=175972#175972] which seems to have affected many people.

  Conexant HD Audio (hardware id: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000)

  There has been no official driver published this work in Windows 7 64 bit. It works fine in 32-bit, windows 7, and using different drivers from other sources + partial + fix can be found.

  Using these drivers:

  [Audio 4.8.0.0 | http://209.167.114.38/support/Download/files_downloads/pspa1c/vista/Audio4.8.0.0.zip]
  [sp35683 | ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35683.exe]

  and some of the advice [here | http://laptopforums.toshiba.com/t5/Windows-7/Windows-7-64-bit-drivers-for-P100-P105-Users/m-p/67516], it is possible to get the proper functioning, but * only * when using the S/PDIF (HD) audio output. When the S/PDIF cable is removed the internal speakers make noise for a fraction of a second, then silence.

  I tried everything and this issue has been around for months and months, but no perfect solution seems to exist. I was wondering if there is a way to update the drivers of the HD Audio Controller, integrated in Windows 7. Or maybe a hack that allows the internal speakers continue to work (they work for one second!)

  Please, any help on this would be greatly appreciated

  Hello

  The Satellite P300 and P500 Satellite supports the audio chip Conexant too audio driver published for these two models of laptops should work on Satellite P100!

  Please check this!

• Connection to printer Windows XP and Xerox 7132 problems

  I am running Windows XP, Windows Vista and Windows 7 on a network connected to a printer xerox 7132.  The XP machines will be able to send some documents before losing the connection.  I tried to remove and install but still the same problem each time.

  If anyone has had similar problems and know a fix?
  Hello by the way the Forum!

  Hello

  (1) did you nay recent Hardware / Software changes prior to this question?

  (2) you are able to print from other computers?

  (3) what is the exact error message while trying to print from XP computer?

  (4) how many computers are connected with the network?

  (5) the issue is with the printer or are you affected by network Windows XP problems?

  (6) did you check the printer connected locally to the computer?

  Check the city link FIXIT who may help you fixing the issue below.

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  You can also try to download the latest drivers and update the Firmware that can help you.

  Method 2: WorkCentre 7132 support & drivers

  http://www.support.Xerox.com/support/WorkCentre-7132/downloads/enus.html?OperatingSystem=WinXP&fileLanguage=en

  Hope this information helps.

• Satellite L450D-13 x - lost wireless connection and will not sign up to all the

  I have a Satellite L450D - 13 X, I was able to use the wireless until today where it has stopped working. No matter what I do, it says that the wireless device is disabled.
  I tried to update and diagnoses, but they all come back fine.

  Can anyone help?

  Try to restore OS to an earlier time using System Restore tool. Maybe some update Microsoft screwed up the WLAN functionality. Very often the driver WLAN is displayed as an option to update.

  Try this as the first step.
  Also try restarting your router.

• Satellite A210-1AP - battery and power supply problem

  A few weeks ago I received my laptop (Satellite A210) reapair and the motherboard was changed.

  Since then, I got problem with the battery when it is inside and power cable is pluged.
  When the cable is in the laptop running on battery power I do not know why. Then when I turn it off battery led is lit Orange and the battery is charging.
  When the PC is turned on, the indicator light does not work and the battery becomes lower.

  So I wonder what the problem is.
  I read somewhere that this problem could solve the BIOS update.
  So anyone have experience like this.
  Also how is installed BIOS, I saw there is an installer for windows (so I guess it isn't hard).

  And somehow can back up old BIOS so I can go back if something bad happens.

  > A few weeks I got my laptop (Satellite A210) reapair and the motherboard was changed.
  > Since then, I had problem with the battery when it is inside and power cable is pluged.

  In my opinion, the technician has done something wrong
  The point is that this problem occurs after the exchange of motherboard and I think what this is about.

  Contact the ASP who repaired the laptop and explain your problem.
  I doubt that a BIOS update would solve this problem. I think it s a question an electrician

• Satellite L650 - Windows detected a hard disk problem

  I have 9 as 4 months old satellite L650 that this microsoft Windows message keeps popping up. "Windows detected a hard disk problem, back up your files immediately to prevent the loss of information... etc" have I not a bum hard drive or is it a mistake?
  I have
  have the media discs to recover and this means that I have to reformat the HARD drive and try again. !

  Hi watthhel,

  I think the error message must be correct to Windows 7 and you must do what tells you the message: immediately back up your data and replace the HARD drive with a new one. In your case I would never save important files on the HARD drive. Too risky to lose important files

  Your laptop is 4 months old and that would mean it s covered by the warranty. Contact your local authorized service provider and ask for a replacement drive. They will exchange it and the service is free. :)

• I have my windows automatic update. the other day, my windows updated and Ive had problems of e-mail and online video problems. I have vista Home premium OS. any suggestions?

  can receive email, but not able to send after the recent ('important') updates of windows have been installed.
  also can't see videos on facebook because of the mistakes because of these updates.
  I have the my windows update set to automatic and noticed these problems after an update has taken place. I did a system restore and everything worked fine. Needless to say the next day, the same thing. I even went to the windows update to manual setting, and it is always updated by itself. This made 4 consecutive days. now when I go to system restore, I don't even get the opportunity to go beyond 5 days! video errors on facebook tell me that "the video is unavailable" and "video has been deleted or is not visible because of the privacy settings. I also noticed that most installed updates are updates to windows security. and my windows update seems to be popping up constantly telling me ago over updates to install.

  Hi Unhappy72,

  I'm sorry that you are still facing the same problem. I'll be more than happy to help you.

  I have a few questions:

  (a) what version of IE are you using?

  (b) has been going through the steps to reset Internet explorer?

  (c) you have any version of Flash Player on your system?

  You can try to update the version of Flash Player for videos.

  To do this all first you need to uninstall and then go ahead and download the latest version and install it.

  To uninstall the application follow the steps given below:

  1. open programs and features by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  2. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please visit the below given link:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also check if the connection parameters are set by default.

  Make follow them the steps below:

  1. open Internet Explorer.

  2. press the Alt key on your keyboard for the file menu if it is not already there.

  3. go to tools, click on Internet Options.

  4. click on the Connections tab.

  5. at the bottom of the page, it will be a local network settings tab, click on this.

  6. check if automatic detect settings is enabled in the box, if it isn't what to choose.

  7. close all Internet Explorer Windows and reopen and check if the problem persists.

  This should solve your problem of not being able to send emails.

  You can also try to clean boot your system and then try to play the videos. This will let us know if the background services interferes with the proper functioning of your system.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you have disabled all services that you can check if you are able to play the videos. If so, you can try the divide and conquer method to find what service exactly the origin of the problem. For those who follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Alternatively, you can try to disable the modules such that some add-ons can be a problem while browsing through the internet.

  To disable the modules follow the below given steps:

  1. click on the Start button, click principally made programs, on Accessories, click System Toolsand then click Internet Explorer (No Add-ons).

  For more information on the modules, please visit the below given link:

  Internet Explorer Add-ons: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop XP to Windows 7 OfficePro 8500 connect problem

  I searched this problem without success and I hope Im not presenting a topic previously.  I recently bought the OfficePro 8500 and it had set up correctly on my laptop XP Home network of Office XP wireless connected to the computer bureau/printer.  Since then, I've replaced the office with a unit of Windows 7 and everything works very well from the desktop to the printer.  I'm sure that I've updated the printer drivers for Windows 7 in the new office (looks like they are 12 Rev and it seems to Rev 13 is the last?).  My XP laptop recognizes the right printer by default, but it ends there-no communication or printing.  I diddled with "setting up the printer" on both ends and can not print from wireless laptop.  Don't know if this binding is to the desktop (Windows 7 end) or the computer laptop (XP software).  I would be very grateful for any help/suggestions.  Thanks for any help/suggestions.

  Problem solved!  Thanks for your help.  The ultimate solution was to reinstall the HP driver in Windows XP machine.  Don't know not how/why it was working before but reinstall the driver did the trick.  Thanks for your help.

• Photon: Dropped calls and network connectivity problems

  I bought my Photon August 18 and he was not long for me first to the problems with network connectivity.

  The phone displays signal on the phone, but when you try to call, send text messages or surf the web. Zilch.

  A soft reset works every time. I've had some experience with the issue of the "appeal of ghosts", but had no network connectivity so often that he was too much a problem. Restores the soft 3-4 per day.

  I took the phone to the Sprint store and they told me that my phone verified and were not hardware problems that may be found. I said at the time on the update of the software of MR5 and was anxious to see how the phone after the update.

  I received the update on Wednesday and the phone worked fine. No appeal of ghost, no network connectivity not problems, only dropped the call.

  Now, Friday morning, I lost network connectivity despite seeing the strength of the signal and had to perform a soft reset to regain connectivity. My wife and I bought this phone at the same time. She had many calls interrupted before the update and we both experienced after that update eventhough signal showing on the phone is at least two if not more bars.

  Is this a known issue? Is it going to be/CAN this be corrected by a software update? Is this phone a lemon and he'll remember?

  I LOVE this phone. I don't want to get rid of it, but...

  Seriously. It's a phone! Making calls should be the FIRST thing that is done right.

  Please, someone, Motorola, reassure me that this isn't a lemon and that network problems are going to be fixed. I CAN wait, but I don't want to get stuck with two phones for $200 that need to be pampered just to be usable.

  Thank you

  TC

  Yes, it turns out that be was a buggy phone. Two stores tested Sprint phone for reception of the signal and they said that it spent; but as said the technician in the second store, the tests they take place the phone in ideal conditions.

  The two stores I've visited, said they were ready to replace the phone, but my first visit came just before the MR5 update software while I was willing to wait to see if the update corrects the problem. It didn't, but the replacement of the second store phone works fine with upgrading to MR5 and really no problem.

  I'll go ahead and mark this question as a response, but if you experience the same problems of chance complete loss of all network connectivity (Sprint or otherwise), I recommend getting the phone replaced. It is a bad camera.

  Oh and the technician at the second store mentioned the network problems. It has been a problem for them, but the most telling proof of the issue of network is random dropped calls. So if from time to time, you lose a call under the conditions of good network signal, it's probably not your phone and Sprint. I have almost that many abandoned calls as of late, so it could have been the wrong phone I had that really amplified the problem... or... Sprint has got some of the bugs in our region.

  Thank you for looking in. I hope that your problems are as easy to solve as mine and I hope that you are still within your 30 days so that you get a new replacement.

  Best wishes

  TC

• wireless network and Internet connection problem

  I had a yellow triangle on the network icon, but I fixed,

  now no icons on the network icon

  

  ____________________________

  

  __________________________________

  

  ___________________________________

  

  but same problem

  I re - install the adapter wireless but same problem, I can not open any site!

  Same problem,

  Thank you

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Format Windows 7 and the installation problem

  Hi, I have a problem of windows I'm getting conflicting solutions when I search forums. I have a Dell laptop that I bought in 2008, which came with Vista Home Premium 32 bit. Last year, I decided to buy a drive to upgrade to Windows 7 Home Premium 32 bit. Last days, I experienced a large amount of blue screens, closures, slow behavior and I finally decided to bite the bullet and reformat. My problem is I have more drive Vista OEM with me and what I read online the win 7 upgrade product key only works if I'm upgrading from a current version of Windows. Both products are authentic and I am willing to share this information to purchase with Microsoft. Is it possible to get a clean install of Win7 key in this case or any other alternative suggestions?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Confused about Windows 7 and vRanger connection

  I pulled my PC of laboratory for testing of vRanger connection, but the client could never connect to the service. He has worked the last time I got it running. I checked and the services were running. Version = 7.0.2. Thinking that something went south with my lab pc I got a laptop with Windows 7 Pro 64-bit and 6 GB of RAM. I installed the same version of vRanger connection and after a qualified installation, I found myself with the same exact error - could not connect to the service. Then I read about vRanger connection plug and see that Windows 7 is not listed as an OS supported to install more. Is this correct? Should we use a server operating system to run vRanger connection?

  TIA

  First thing to check when you see a glorious "Could not connect to service", is to go to the Windows - Application and Services - vRanger connection newspaper Service event viewer and retrieve the last error. There could be a clue.

  Talk about your case, I guess that's a "feature", we met at Ranger 7.x.

  You MUST be logged in under the account that you use for care to ensure that the installation or upgrade was successful.

  If it was a facility clean, better delete everything, including SQL instance. Program directory Files\Dell\vRanger recheck if the files are actually deleted. You need to maybe restart the server and go through Control Panel once again to uninstall.

  Then log in to the zone with officials of department store and run executable.

  Another thing I noticed during the upgrade is if Ranger DB is attached to an instance of SQL 2005 'foreign', usually BackupExec. Logic of ranger fails completely and install utility keeps SQL Express 2005 (impossible to create a new instance), which does not work with Ranger 7.x.

  But it is a different story.