Confused on what video graphics card is installed on the pc of the tis.

Similar Questions

• Video graphics card question is blocking the

  I have mid 2010 15 "MacBook Pro. Randomly, it crashes during video playback. I had the logic board replaced, but the same thing happens. It is not covered by the apple repair program, but I want to know what I can do to pay so he can be fixed permanently? I do not consider re-flow or re-balling like that can happen again. I saw a repairman who intended to replace the GPU but I'm still not sure. I would pay for the repair, but I get nowhere on apple's site

  any help appreciated since a tor edi with a unusable macbook pro

  The problem is probably due to the discrete GPU failure. Download gfxCardStatus2.3 and use it to disable the discrete GPU. It is of a temporary workaround until you get your motherboard replaced or buy a new model.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Resolution is dependent on the video graphics card memory?

  Resolution is dependent on the video graphics card memory? If that's true then how much resolution a 2 GB card can support? I mean on what map I'll be able to run a game like 'NFS RUN' on a resolution higher, if I have 2 cards with the same specifications but difference is 1 GB and 2 GB, I don't speak of GDDR3 128 bit NVDI GT 440. ?

  Resolution is dependent on the GPU, and not on the installed memory. The memory will help the screen refresh more quickly, and video help in smoother race.

  According to the specs here:

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-gt-440-channel/specifications

  You should be able to get a maximum digital resolution of 2560 x 1600 and an analog-resolution 2048 x 1536 (VGA). This assumes of course that your monitor will be very high. The highest card ira is limited by the capabilities of the monitor also.

  Thus, the memory card more than video, that you, smooth graphics should work, but it will have no effect on the resolution.

  SC Tom

• Dual display (x 2)-l' one is PINK/PURPLE in color, how can I check for errors of video/graphics card?

  I'm trying to implement 2 screens (extended desktop mode) and when I connect them both, however, I got a picture on two screens, one of them is color purple/pink.

  I have swithced monitors around, it's NOT either of the monitors, they bot work very well... and the cablesARE guaranteed in the monitors and computer ports.

  What is the video/graphics card which is the problem?... If so, how can I check these errors?

  Thanks to all who respond!

  Try changing the cables, if they are of the same type.

  I think that the problem is a damaged cable.

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Re: Satellite Pro L10 - what graphics card can I for the SIMS 3?

  What graphics card can I play the sims 3 on a Satellite Pro L10?

  It must support shader 2

  Hello

  The L10 Pro Sam is a former an I doubt that you will get the Sim 3 running on this laptop.

  You need much stronger unit!

• Can what "maximum" graphics card I use in Dell Optiplex 755 SFF

  Hi, currently I'm using an Amd Radeon 5450 on this pc

  Round 2
  NET 2
  Intel Core 2 Duo E6850 Naam
  Codenaam Conroe
  Pakket Socket 775 LGA
  65nm technology
  Specificatie Intel Core 2 Duo E6850 CPU @ 3 .00GHz
  Family 6
  Family Classics 6
  Model F
  Good model F
  B progress
  G0 Reparaturfachmann
  These MMX, SSE, SSE2, SSE3, SSSE3, Intel 64, NX, VMX
  Virtualisatie ondersteunt, turned
  Hyperthreading Niet ondersteunt
  Bussnelheid 332,5 MHZ
  Note: bussnelheid 1329,9 MHZ
  Kernsnelheid 3000 MHZ stock
  Stock bussnelheid 333 MHZ
  Gemiddelde are 52 ° c.
  Caches
  L1 data cachegrootte 2 x 32 KB
  L1 ces-cachegrootte 2 x 32 KB
  L2 unified cachegrootte 4096 KB

  Gyg Mem internal 6.

  I am not satisfied with the performance of the Radeon 5450.

  What is the «largest "graphics card I use in the Dell 755?»

  Thanx

  Huh

  No such model card works with all THE SIZES.

  MOST of the cards DO NOT MATCH and will NOT WORK.

  The slot is only 1 large map.

  Feeding is 305 w or LESS depending on the size.

  the 755 isn't a game system.

  75W max card and ONLY with Mini lathe.

  Best map of single slot for Tower is a GT740.

  https://www.Amazon.com/ASUS-1gb-graphics-card-GT740-OC-1GD5/DP/B00KOUIOX6

  

  

  

  cs_setInnerHtml ('video_0b430e9e-57cd-420 a-9dbf-8d7645b0f43f', ");

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Graphics card does not support the Aero themes

  I have a graphics card on CPU and its brand

  A10 - 7850K of AMD Radeon R7, 12 hearts of calculation 4 C + 8 G, 3700 Mhz, 2 Lossnay

  And this computer was built by me and I installed Windows 7 Home Premium 64 - Bit

  When I updated Windows Experience Index graphics Aero said 1.0 so I need the driver for this problem.

  It going no higher than 1.0

  Pls tell me if I can do something to solve this problem it is the old boring basic theme.

  Hi Lyle,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem your graphics card does not support the Aero themes. If you experience a problem then you need to update the drivers.

  Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Try to update the drivers from the link provided below and see if it helps you to solve the problem.

  AMD DRIVERS

  You can also consult the article mentioned below to troubleshoot the Aero themes.

  Solve problems with Windows Aero

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  Kind regards

• I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

  Photoshop Lightroom  I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

  Hi ashvinkumarb40658145,

  When exactly LR 6 crash and you use a Wacom?

  Concerning

  Rohit.

• Compaq presario v6000: what video card is installed in the compaq presario v6000

  I updated my system to Windows 10, but now my video is terrible because Windows uses the pilot of "Microsoft base Display Adapter".  I was not able to get NVIDIA to automatically detect the exact card that is used in my laptop.  He always tells me that I need to have Java installed before it can detect automatically, but Java IS already installed.  I need the right driver for this card before I can have a good "10 Windows experience".

  I see that your laptop is not yet supported by HP for Windows 7, so...

  See if it works.  If it is not, unfortunately, I don't have any other ideas for you to try.

  Download and run this driver.  You will probably get an error not supported operating system.

  This package contains the display driver VGA NIVDIA for NVIDIA GeForce Go graphics in notebook models and operating systems.

  File name: sp35686.exe

  Go to Device Manager and click on the graphics card Microsoft Basic.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp35686.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• problems with the graphics card after installing windows 7, code 43

  I installed windows 7 & my ATI-RADEON XPRESS 200 SERIES is stopped by windows 43.It code stipulates that drivers are ok... but it is not recognized... I also downloaded a few 3d Screensavers & they worked very well now, it is not able to open the screensaver because of the video card or to be compatible with Direct 3D... This question has not pop up until after you have installed windows 7, I have checked & found a lot of problems with windows 7 & ATI-RADEON XPRESS 200 SERIES drivers or recognition. Tried to update the driver but the States, it is far, but windows 7 is having a problem with drivers... Y at - it a fix for this, looks like it should be a matter of windows & microsoft should have action corrected problem because windows is caused this problem... Have installed all windows updates & all up to date... Can someone try to give me a solution to fix this problem? Not sure if they have an upgrade or accelerator program 3d graphics that may have to be installed... & again thanks if anyone can help... Have a great day...

  ATI-RADEON XPRESS 200 SERIES is an accelerator of limited DirectX 9 graphics (integrated graphics), which was

  published in ' 07 and apparently is not compatible with Win7.

  Old hardware with a Windows version compatibility isn't something that never gets fixed by SM.

  It is the mfg of the material to support the product through a driver updated, and trend of integrated graphic card

  not be supported as long as a dedicated graphics card.

  In this case support drivers apparently stopped with Vista.

  If you try to get drivers via Device Manager or Windows Update they can provide incorrect information

  What about drivers who are up to date.

  These two methods are a little known does not install the proper drivers for the graphics.

  I read that some people have had luck on Win7 with the Vista drivers for various materials. Doesn't hurt to try.

  You can download the drivers for XPRESS 200 SERIES from the AMD website below-

  http://support.AMD.com/en-us/download

  .

• Model hp desktop a622n... updated for Windows 7 video graphics card

  I have a hp a622n office that has a motherboard Micro Star International.

  The serial number of the motherboard is 4311483428... bus clock mghz 100... Award BIOS software 3 26 05/09/2005

  My screen is a Samsung SyncMaster s/n GS19H9NX601526

  Intel 82845 G/GL/GE/PE/GV Graphics Controller

  It came with Windows Xp and I did a clean install of Windows 7

  I am able to use the monitor but... trying to activate standby or sleep mode setting screen... I get a message that I need a graphics card that supports 3D...

  Through my research I found that a Radeon X 1300 card #400558 - 001that is supposed to solve this problem...

  I was told that I need a PCI...

  I find this advice to VisionTek... their customer service told me to make sure the motherboard is working with this...

  This card will work?  and are there other boards out there that would work too?

  Thank you...

  Lets start over which is an antique with limited options because he has only PCI slots and not normal video card.  He has the card, you ask about "high definition 3D Performance & quality of the Image on your PC" If you plan to get one, try the EBay marketplace because it's really old hardware and you can get one for almost nothing.  For example: http://www.ebay.com/itm/Visiontek-Radeon-X1300-Graphics-Card-256MB-128bit-900106-/191175474229

  Just make sure one ordered is the PCI version.

  There are other possible choices: http://www.newegg.com/Product/Product.aspx?Item=N82E16814187213

• Upgrading the video graphics card - HPE-180 t

  I need to upgrade the video card in my HP Elite HPE-180 t. My PC came with ATI Radeon HD 5450 graphics card and the standard power 460 watt. I intend to switch to NVIDIA GTX 650 it, model 2 GB. I do a lot of editing video and need a video card that has "cuda" processors on the video card.

  My questions are this card with my work computer at will (1) and will (2) I also need to update the power? If food needs to be replaced what brand and size of power supply should I buy?

  Most GTX 650 it require a 450 Watt or greater power supply with PCIe auxiliary power connector. You may or may not need to provide a new power. Please review the Corair CX500, CX500M, CX600, or CX600M your power supply needs.

  Please click the White Star of KUDOS to show your appreciation