Confusion about the tag recovery
Hi all
We had a situation where he must restore and recover to point in time until 24 June. One of our colleagues initially restored the controlfile from 24 June backup using script below...
run
{
ALLOCATE CHANNEL c1 DEVICE TYPE SBT_TAPE PARMS ' ENV = (NB_ORA_SERV = masterhp003.xxxxx.com, NB_ORA_POLICY = ora_pacerprd01_pacerprd, NB_ORA_CLIENT = orasalxhp603), BLKSIZE = 524288';
Restore controlfile from "TAG20130624T004158"
output channel c1;
}
After that, he executed the script below to recover the database.
run
{
ALLOCATE CHANNEL c1 DEVICE TYPE SBT_TAPE PARMS ' ENV = (NB_ORA_SERV = masterhp003.xxxxx.com, NB_ORA_POLICY = ora_pacerprd01_pacerprd, NB_ORA_CLIENT = orasalxhp603), BLKSIZE = 524288';
ALLOCATE CHANNEL c2 DEVICE TYPE SBT_TAPE PARMS ' ENV = (NB_ORA_SERV = masterhp003.xxxxx.com, NB_ORA_POLICY = ora_pacerprd01_pacerprd, NB_ORA_CLIENT = orasalxhp603), BLKSIZE = 524288';
ALLOCATE CHANNEL c3 DEVICE TYPE SBT_TAPE PARMS ' ENV = (NB_ORA_SERV = masterhp003.thehartford.com, NB_ORA_POLICY = ora_pacerprd01_pacerprd, NB_ORA_CLIENT = orasalxhp603), BLKSIZE = 524288';
ALLOCATE CHANNEL c4 DEVICE TYPE SBT_TAPE PARMS ' ENV = (NB_ORA_SERV = masterhp003.xxxxx.com, NB_ORA_POLICY = ora_pacerprd01_pacerprd, NB_ORA_CLIENT = orasalxhp603), BLKSIZE = 524288';
the value of newname for datafile 1 to ' / asj_pacerqa/data01/pacerqa/datafile/system01.dbf';
the value of newname for datafile 2 TO 'asj_pacerqa/data01/pacerqa/datafile/sysaux01.dbf ';
the value of newname for datafile 3 to ' / asj_pacerqa/data01/pacerqa/datafile/undotbs01.dbf';
the value of newname for datafile 4 to ' / asj_pacerqa/data01/pacerqa/datafile/users01.dbf';
the value of newname for datafile 5 to ' / asj_pacerqa/data01/pacerqa/datafile/base_idx_256k_0101.dbf';
the value of newname for datafile 6 to ' / asj_pacerqa/data01/pacerqa/datafile/base_idx_6400k_0101.dbf';
the value of newname for datafile 7 to ' / asj_pacerqa/data01/pacerqa/datafile/base_idx_6400k_0201.dbf';
the value of newname for datafile 8 to ' / asj_pacerqa/data01/pacerqa/datafile/base_idx_64k_0101.dbf';
the value of newname for datafile 9 to ' / asj_pacerqa/data01/pacerqa/datafile/base_idx_64k_0201.dbf';
the value of newname for datafile 10 to ' / asj_pacerqa/data01/pacerqa/datafile/base_tbl_256k_0101.dbf';
the value of newname for datafile 11 FOR ' / asj_pacerqa/data01/pacerqa/datafile/base_tbl_6400k_0101.dbf';
the value of newname for datafile 12 to ' / asj_pacerqa/data01/pacerqa/datafile/base_tbl_6400k_0201.dbf';
the value of newname for datafile 13 to ' / asj_pacerqa/data01/pacerqa/datafile/base_tbl_64k_0101.dbf';
the value of newname for datafile 14 FOR ' / asj_pacerqa/data01/pacerqa/datafile/base_tbl_64k_0201.dbf';
restore the tag database 'PACERPRD_LEVEL0_174_24 ';
switch datafile;
recover the database;
output channel c1;
output channel c2.
output channel c3.
output channel c4.
}
The "PACERPRD_LEVEL0_174_24" tag was also from a data file backup 24.
Please suggest that the database has been restored until 24 or it has been restored in the current data. Please, help us to understand.
Look at the log of the race to RESTORE + RESTORE in order to identify the archivelogs (to date) have been applied by Oracle.
It is perfectly possible to use an older controlfile (of 24) and retrieve a present (30).
You must use the SET clause until in RMAN to specify the point-in-time recovery.
Hemant K Collette
Tags: Database
Similar Questions
-
Confused about the notion of VLAN
I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?MGMT is on vlan 4093DHCP is on VLAN 100 trunk e34 10.10.1.1Host 1 is on VLAN 200 trunk e34 10.10.2.1Host 2 is on VLAN 300 trunk e34 10.10.3.1active IP routing
-
Confusion about the size of the array in Oracle 11 g
There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:
_____________________________________________________________________________________
. . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568
____________________________________________________________________________________
which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.
But when I find the size of the table using the query:
SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '
He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.
I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.
Please get back with the answer to my query
Concerning
Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.
John
-
Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)Thank you and best regards,
IsabelleHello Vero,
You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:
http://www.Oracle.com/technetwork/documentation/VM-096300.html
You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.
Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)
Best regards
Chetan
-
Confused about the extension of the Sprite class
Howdy-
I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.
My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.
I explored the Open Flash Chart code and note that the main class extends the Sprite class:
Base/public class extends Sprite {}
What this lets you do?
Also, on a related note, how to draw, say, a line once I extended?
Without extend Sprite I could write:
var graphContainer:Sprite = new Sprite();
var newLine:Graphics = graphContainer.graphics;
...
And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:
var newLine:Graphics = this.graphics;
My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»
A number of things.
First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:
public function Chart (width: Number, height: Number) {}
This.Width = width;
This.Height = height;
put in a background invisible to this size:
this.graphics.beginFill (0,0);
this.graphics.drawRect (0,0,width,height);
}There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...
Then, after that, your chart should be functional...
Then back in your scenario, you could do this:
import graphics. Table;
Stop()
var myNewChart:Chart = new Chart (300,200)
myNewChart.render ();
addChild (myNewChart) -
Confused about the capacity of the HARD drive on my new Equium L350
I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.
I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
Any help would be appreciated.
Thank youI agree with InvaderZim.
But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.
I assume you are using the Vista operating system.
Vista uses hidden for some files from recovery partition.
If you check the Disk Manager, and you should see all available on your HARD disk partitions.See you soon
-
Confusion about the requirements for the 2015 CC software
I currently have Windows 8.0 (64 bit) which is so satisfactory and stable. I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal. So for now, I would stick with what I have. But the problem is the confusing requirements for various programs within the pile of creative cloud applications:
Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows
Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows
Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)
So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are. Does this mean Photoshop CC 2015 is not compatible with Windows 8? And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock. Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.
Can someone clear up the confusion, please?
I think that my hardware is OK for this.
Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)
CPU: AMD FX-6300 Vichera 3.5 GHz
Memory: 16GB Kingston HyperX DDR3 2133 MHz
Video: MSI N650-MD1GD5/OC GeForce 650MX
Monitor: Acer S271HL of 27 "(1920 x 1080)"
Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)
HDD1: Western Digital 320 GB (System)
HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)
VidCap: Blackmagic intensity Pro HDMI
USB hub: Rosewill RDCR-11005 5.25 "
UPS: APC Back-UPS XS 1500
Router: Netgear WNDR3700 N600
System is NOT overclocked
It is compatible but not tested.
-
Confused about the new creative cloud
Hi all
Since I read adout the new creative cloud I'm confused about what will happen to my license for Adobe Lightroom. Will they remain still desktop apps as well or I have to pay for an annual license, if I want to use new versions of Lightroom?
I am a casual photographer and I like to use Lighroom for my photos, but I don't think that pay for an annual license because I'm not spending a lot of time, image-editing.
Can someone clarify this for me?
Thank you very much
Lucian
5 Lightroom does not have subscription only, you're fine. There is no sign that it will even happen in the foreseeable future either. It's just the ex-Creative-Suite that all talk.
Target market of Lightroom is different from the Creative Suite/Cloud. CC is a good deal for the majority of its base of users (next door), while the majority signed without major complaints. Lightroom has a huge customer base amateur, and they would be much more difficult to convince us to go subscription only. They would be likely to lose most of customers of Lightroom at the moment, and they are not completely stupid.
-
Satellite C850-B734 - need to know how to go about the windows recovery
I have a SATELLITE C850-B734
I have some problems with my laptop recently and need to reinstall windows
with my laptop brief, I was able to go into recovery mode where I can reinstall windows or repair only and it take me for an Assistant where I can change my reader sive and numbers etc...
Inorder to access this wizard I had to Press f4 key at startup of device but tried with my toshiba satalite c850 I do not think the wizardfor your information I have windows 8.1 and have all my HARD drive in one partition and want to add more partitions when I reinstall windows
I looked in the settings to find that I can reinstall windows, but seems this isn't a recovery... because all the drivers and toshiba applications will be lost in the process and the Assistant told me that I have to manually reinstall if I have CDs for them that I don't have and don't want to go to the online search for drivers and stuff like that There must be an Assistant where I can reinstall windows and drivers for my device without much efforthelp will be appreciated... thx
If you have not created some recovery discs/media in the past and that recovery of HARD drive option (link posted by Liam) does not work, then you have no other options except for the command the drive recovery from here:
http://backupmedia.Toshiba.EU/landing.aspx -
Questions about the product recovery DVD?
Hello
After a boot failure sunk with Windows XP Home Edition on my Equium A60-181, I had no choice but to use the product recovery DVD. I noticed there is something called expert mode, I suppose that allows you to create a custom default value of the factory Setup. So I was wondering, is it possible to format the hard drive in FAT32 instead of NTFS, create a partition for Linux and continue to use the product recovery DVD? In case you are wondering I want FAT32, so I can safely read and write my XP with Linux partition as NTFS writing is still experimental at the moment.
See you soon,.
Richard S.
Hello
Check out this link. You will find an info exactly how to recover with the Expert mode.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2513&TSTART=15
However, if you want to create a new FAT32 partition or another standard (Linux), I propose to use the magic of Partitions. This is a very nice program and you have a lot of options (change the size of the partitions, etc.)
Good bye
-
Confusion about the Source of excitement in the bridge SMU-4331 input module
Hello
I had some confusion through the input of the bridge SMU-4331 sheet module.
In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!
I think this should me Maximum current specification.
If you look at the table below
350 ohm resistance, the current should be 10V/350 ohm = 28.5mA
but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.
any thoughts?
Kind regards
Mirash
Hello Mirash,
I'm glad I could help!
As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric. This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale. In this way, we can compensate for permanent changes in the voltage. One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach
See you soon,.
-
A few Questions about the manual recovery
DB version: 11.2.0.3.0
Platform: Oracle Linux 6.4I'm not an expert in recovery.
We had a level of SAN cloning of a RAC database. We store online Redo logs in the diskgroup RL_DG and ARCH_DG diskgroup Archive redo logs.
After the plan of SAN cloning (EMC BCV Synch), we tried to start up of the DB using srvctl start database-d < MyDBName > and we got the following error message.
CRS-5017: the action "ora.msblprd.db start" resource has met the following error:
ORA-01113: file 4 should media recovery
ORA-01110: data file 4: "+ MBL_DATA/msblprd/datafile/users.271.803502221".We realized that a lot of data (not justs users.dbf) need recovery files. Thus, we tried to run to RECOVER the DATABASE. But it errored out. So, we ran to RECOVER database with the HELP of BACKUP CONTROLFILE until CANCEL ; command.
[oracle@mssrpt01dbp1001 ~] $ sqlplus / as sysdba
SQL * more: Production of the 11.2.0.3.0 version kills him Jun 10 14:41:41 2014
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connect to an instance is idle.
SQL > bootable media.
ORACLE instance started.System Global area 8.5516E + 10 bytes
Bytes of size 2237776 fixed
Size variable 2.4428E + 10 bytes
6.0935E + 10 bytes database buffers
Redo buffers 151142400 bytes
Mounted database.
SQL > SELECT MEMBER FROM V$ LOG G, V$ LOGFILE F WHERE G.GROUP # = F.GROUP # AND G.STATUS = 'CURRENT ';MEMBERS
--------------------------------------------------------------------------------
+RL_DG/msblprd/onlinelog/group_3.258.834497269
+RL_DG/msblprd/onlinelog/group_3.258.834497283
+RL_DG/msblprd/onlinelog/group_13.262.834498753
+RL_DG/msblprd/onlinelog/group_13.262.834498735
+RL_DG/msblprd/onlinelog/group_32.269.834527443
+RL_DG/msblprd/onlinelog/group_32.269.834527459
+RL_DG/msblprd/onlinelog/group_44.267.834526221
+RL_DG/msblprd/onlinelog/group_44.267.8345262378 selected lines.
SQL >
SQL >
SQL > RECOVER DATABASE;
ORA-00283: cool cancelled due to errors
ORA-01610: recovery using BACKUP CONTROLFILE option must beSQL > RECOVER DATABASE with the HELP of BACKUP CONTROLFILE until CANCEL;
ORA-00279: change 7996788033403 September at 10/06/2014 04:57:12 to put on 2
ORA-00289: suggestion: + ARCH_DG
ORA-00280: change 7996788033403 thread 2 is in sequence #16085
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
+RL_DG/msblprd/onlinelog/group_3.258.834497269
ORA-00325: journal archived for thread 2, wrong thread # 1 in the header
ORA-00334: archived log: "+ RL_DG/msblprd/onlinelog/group_3.258.834497269".
ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
ORA-01194: file 1 needs a recovery more match
ORA-01110: data file 1: '+ SBL_DATA/msblprd/datafile/system.260.803502221 '.SQL > RECOVER DATABASE with the HELP of BACKUP CONTROLFILE until CANCEL;
ORA-00279: change 7996788033403 September at 10/06/2014 04:57:12 to put on 2
ORA-00289: suggestion: + ARCH_DG
ORA-00280: change 7996788033403 thread 2 is in sequence #16085
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
+RL_DG/msblprd/onlinelog/group_3.258.834497283
ORA-00325: journal archived for thread 2, wrong thread # 1 in the header
ORA-00334: archived log: "+ RL_DG/msblprd/onlinelog/group_3.258.834497283".
ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
ORA-01194: file 1 needs a recovery more match
ORA-01110: data file 1: '+ SBL_DATA/msblprd/datafile/system.260.803502221 '.SQL > RECOVER DATABASE with the HELP of BACKUP CONTROLFILE until CANCEL;
ORA-00279: change 7996788033403 September at 10/06/2014 04:57:12 to put on 2
ORA-00289: suggestion: + ARCH_DG
ORA-00280: change 7996788033403 thread 2 is in sequence #16085
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
+RL_DG/msblprd/onlinelog/group_13.262.834498753
ORA-00310: archived log contains sequence 16107. 16085 sequence required
ORA-00334: archived log: "+ RL_DG/msblprd/onlinelog/group_13.262.834498753".
ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
ORA-01194: file 1 needs a recovery more match
ORA-01110: data file 1: '+ SBL_DATA/msblprd/datafile/system.260.803502221 '.-I tried to enter AUTO
SQL > RECOVER DATABASE with the HELP of BACKUP CONTROLFILE until CANCEL;
ORA-00279: change 7996788033403 September at 10/06/2014 04:57:12 to put on 2
ORA-00289: suggestion: + ARCH_DG
ORA-00280: change 7996788033403 thread 2 is in sequence #16085
Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
Auto
ORA-00308: cannot open archived log "+ ARCH_DG".
ORA-17503: ksfdopn:2 cannot open file + ARCH_DG
ORA-15045: ASM '+ ARCH_DG' file name is not in the form of reference
Attempts above did not work because oracle was looking for the archived logs that was not present in ARCH_DG, RMAN has backed it up to the band and issued "delete entry".But I have a few basic questions.
Question1. Why the command RECOVER DATABASE fail with ORA-01610?
Question2. RECOVER the DATABASE and recover database using BACKUP CONTROLFILE until CANCEL commands will look only archivelogs not redo logs online. Right? I understand that this database will try to retrieve media by the application online Redo Logs when the STARTUP OPEN command is issued. Right?
Question3. In the command RECOVER database using BACKUP CONTROLFILE until CANCEL that BACKUP CONTROLFILE, we refer to the?
Question4. What does AUTO option? in calls it "Specify log" as I have indicated above in red
Question1. Why the command RECOVER DATABASE fail with ORA-01610?
Oracle has detected that the controlfile was 'old' (for example had a low point control #) as the database. If she recognized the controlfile as a BACKUP CONTROLFILE. You make a full recovery, that can be done if the real current controlfile and redo log files are consistent and 'newer' database in a DATABASE files to RECOVER normal.
Question2. RECOVER the DATABASE and recover database using BACKUP CONTROLFILE until CANCEL commands will look only archivelogs not redo logs online. Right? I understand that this database will try to retrieve media by the application online Redo Logs when the STARTUP OPEN command is issued. Right?
N ° N ° (in the normal case) the RECOVERY DATABASE can automatically identify the online redo log file must be applied to make a full recovery. In your case, Oracle has already tried an incomplete recovery. It will have to be provided (or be able to AUTOMATICALLY generate) the archivelog file names. Apply of Redo Log files online only happens to a recovery of Instance - a START after a crash or abort. Your case is a Media Recovery (again because of the backup control file).
Question3. In the command RECOVER database using BACKUP CONTROLFILE until CANCEL that BACKUP CONTROLFILE, we refer to the?
The controlfile you have on the disk is 'old' - it is recognized as a backup controlfile.
Question4. What does AUTO option? in calls it "Specify log" as I have indicated above in red
(in the normal case) Oracle can generate the name of the 'next' archivelog file based on the last archivelog applied and the log_archive_dest log_archive_format and. Given that you had not applied all archivelog and yet, he would not be able to generate the next archivelog expected - this happens also in the RAC recovery where it can generate automatically the archivelog next to (for example) wire #1 file name because the archivelog to thread #1 has been applied, but can still generate automatically for wire #2 until an archivelog was applied.
You will also notice the inadequacy of sever between the online redo log header and the newspaper WAITED
> archived log contains sequence 16107. 16085 sequence required
This means that the data files is much older than the online redo log. Given that your ad doesn't show 22 redo log groups, it is likely that the snapshot log redo DG and DG database files don't match no - the second is much older than the first. You need an archivelog to apply, not the online redo log.
Your query on V$ LOG and V$ LOGFILE should always optimasation THREAD # (when CAR is running) and SEQUENCE # (each Thread has it's own sequence)
You can also view your alerts log. This could indicate that Oracle was trying to recover the datafiles Fuzzy - what would happen if your snapshot was taken without the database in BACKUP mode.
Talk to EMC and Oracle support for the good tips on how to make a snapshot backup of an Oracle database. Otherwise, you'll be toast when you need to perform a recovery of real Production database. I suspect that your DGs and EMC volume is not configured properly to create synchronized instant backups.
Hemant K Collette
Post edited by: Hemant K Chitale
Added sentence "' I suspect that your DGs and EMC volume is not configured properly to create instant backups synchronized." " -
confused about the function of culture
OK I've been using photoshop for a while but it has the function of culture changed? My question is, when I crop a picture, even though I have crops on a very small section, the file remains the same size (pixel dimensions). If an image is 60 m and I have very small crops, it remains 60 M and 5616 X 3200 pixel, for example. I'm a bit confused by the present, I'm sure that when I have cultivated an image before it reduces when I cultures. I hope that I myself make clear...
any help appreciated.
-
Confused about the location of TDE wallet!
due to
http://www.Oracle.com/technology/oramag/Oracle/05-Sep/o55security.html
I guess to add the following lines to sqlnet.ora if I want to change the default location of the portfolio to the orawall folder:
----------------------------------------------------------------
ENCRYPTION_WALLET_LOCATION =
(SOURCE =
(METHOD = file)
(METHOD_DATA =
(RÉPERTOIRE = / orawall)))
----------------------------------------------------------------
I just confused of the last line that describe the path of the portfolio... I mean I do not understand where assumes that this location * / orawall * exist on my computer, why he wrote the full path?This is the full path to the wallet. I suppose that the example of Arup uses little flavor of Unix, it has no doubt created an ORAWALL directly from the root.
You can store the wallet in any directory that you have chosen. Typically, you would choose $ORACLE_BASE/admin / $ORACLE_SID/portfolio. On my Windows machine where I have a database with the SID jcave11gr1, who would be
ENCRYPTION_WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = c:/oracle/admin/jcave11gr1/wallet) ) )
Justin
-
Confused about the new iPhone to load
It seems that online, there are many variations on how to charge an iPhone the first times, we don't know what to believe.
Historically, I charge my iPhone for a day the first time that I get it or after I got a refurb from Apple. My battery life has always been fantastic, representatives of engineering apply even told to say.
This time, I couldn't wait to load the device as I normally would. I connected my iPhone to my PC, did a restore of backup and wait for the iPhone to be able to load completely (about 30 minutes).
Given that I had a lot of things happens, I didn't have the opportunity to "condition" of the battery, charge of the day to the next, or as some reports say that I have to load it only via the provided OEM charger (not PC). Some say that your battery die completely and then get away after the phone two hours before recharging.
All these 'new' information is downright confusing. And yet, I see Apple suggesting as a result a large part of these 'tips '.
Any thoughts on pricing?
There is no requirement to 'manage' load.
Charge at any time, for any period of time.
You can use the phone while charging.
Don't deplete the battery at a low level.
Another that these steps, no more measures need to be taken.
Maybe you are looking for
-
Something new today. I have seen on the taskbar tabs (each of them can present a few tabs) that appear on the task bar, but the open habit. In order to get something to open I have to set on the Firefox icon on the desktop. Then this session opens wi
-
What is the drive in a compaq presaario?
I need to know what type of disk interface using the compaq presarios4000nx. IDE, great ide, ata? I want to replace the Maxtor 6E030L0 that is in there now, but I'm not sure what type of replacement drive. any help?
-
Why don't the 'fn' key let me type F1, F2, etc. ?
I have a Bluetooth wireless keyboard Apple 'Magic' with the 'fn' down key on the left. Regardless of whether or not "fn" is pressed, I always get the behavior indicated by the picture on the key. For example, if I press 'fn', then F3 at the same time
-
Computer hangs at various stage of starting
Original title: allows to start; but never actually gets to the stage of ready. I also ran Kaspersky anti virus more than once. I can't get online without using safe mode. I ran microsoft security scanner which found nothing wrong. My computer freeze
-
Laptop 15.6 inch HP 15-g070nr: I install Windows 7 on Windows 8?
I'm looking at a 15-g070nr 15.6 "HP laptop that comes with Windows 8 is installed. However, the main use I want this laptop for uses WIndows 7 and is above all incompatible with Windows 8. Can I legally install Windows 7 Home Premium 64 - bit OS on t