Confusion of the guest OS

Similar Questions

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• sharing files between 'HST' & 'GST' in the guest only network

  Features of the sharing folder between the guest and host is important when guest only network. Unfortunately, I was not able to find accurate answers and but confusion according to the VWMare Server 2.0 documentation and GUI.

  vmserver2.PDF

  -

  ---

  "Shared folder tab.

  VMware Server does not support this feature.

  guest operating system

  -

  ---

  "VMWare tools properties.

  Shared folders are currently disbled on this host.

  DialogBox help on guest operating system

  -

  ---

  .... To activate the shared folders for the virtual machine, see the documentation for your VMware product...

  I installed VMWare tools on the guest-os (Win2003R2). I started Win2008R2 nine as host and shared folder did not work. I thought that maybe it works with OS experienced as Win2K3 and built a brand new Windows 2003 host and once again no shared folder. Later, I found above document, saying: it is not supported at all then, is there any altarnatives.

  Only way I see is, add a dummy WinXP guest with "bridged" n/w, to play the role of trading place for exchanging files b/w other guests and the host. In my case, it is very important to keep the others invited Win2003 unware of outside n/w.  This strategy XP, just to share the log file is an exaggeration.  I guess people must have solved this problem in a more elegant way, if so please let me know, if there are better ways.

  Thank you

  Riou

  nfall wrote:

  > If the prompt is set to guest only network, then you already have a network connection between the host and the guest. no need for another bridge > network link. So just put in place the traditional Windows file sharing.

  Host is able to ping Guest, but not the otherway, and I think, it's because unless configuration host only the client ethernet adapter is not connected to the physical ethernet adapter of the host.

  Should not be.  Windows is concerned, host-only network is just like a physical NIC connected to a physical LAN.  It's just that in this case, the cards are virtual and the LAN is separate from any other LAN.  In short, your physical host as "two network cards", the physical on and the only host.  The host only one is connected to a virtual switch.  The only other thing connected to this virtual switch is NIC of the virtual machine

  Host is able to ping Guest, but not the otherway, and I think, it's because unless configuration host only the client ethernet adapter is not connected to the physical ethernet adapter of the host.

  As noted above, do not need to connect to the physical NETWORK card because the parameter invited only creates a LAN completely separated between the physical host and the virtual machine.

  If there is procedure to this share windows works, please give me more details. A shared windows is all I need (without resorting to the NAT) to Exchange data between G & H.

  At this point, traditional troubleshooting techniques can be used.  If the comments can not PING host, host has disabled firewall?  But if your goal is to share a file from the guest virtual machine, then PING the host comments is not essential.  Simply the host can display the actions on the guest.  (In fact, PING is not essential whatever it is, as long as you see the shares.)  And you look at one/PINGing by name or IP address?  If you do not need, just use the IP address to remove any DNS resolution problems.

• How can I remove the guest connect you?

  How can I remove a guest login for a 2009 macbook pro?

  Preferences system/users and groups, unlock the lock, select the guest user and uncheck allow invited to connect to this computer.

• Go to the guest user

  When I switch to the guest user apparently opened with sure safari and restart... N if I restart and open it is not dock and nothing to the other just only safari... What should I do?

  This particular guest account has for Safari: nothing you can do about it. If you need a less limited guest account, set one up in System Preferences > users and groups.

• How to remove the guest on Macbook Air user account

  My 13 year daughter, uses the internet recklessly and I need to close the guest account, because my parental control does not seem to work. Even though I've taken away the guest user option in system preferences, it restarts the computer so that she can use safari. Can anyone help?

  Just how did you "took the guest user option in system preferences '?

  Did you go to system preferences > users and groups and click on the padlock at the bottom left and enter the admin password to allow edits then click the guest account and uncheck the checkbox allow clients to connect to this computer?

  Parental control is not / cannot apply to the guest account.

  You must have a separate account and then check the box for this account that says: turn on parental control.

• Extreme problem of airport with the guest account

  It drives me crazy! I had the extreme AC router from the airport for a couple of years now. It works perfectly if the guest account is disabled. Whenever I try to enable the guest account access, I have a time very very difficult to connect to this account. The main and guest account are both set to wpa2. When I connect, I get proverbial bells and whistles go telling me airport utility system is set to be implemented via cable wan which decreases the Security (in my own home that is not a problem) and it tells me to put it in bridge not NAT and DHCP mode. If the clipping the guest account value absolutely not allow internet connection. What I am doing wrong?

  The macbook, I am trying to connect is running LION

  What is the brand and model of the modem Internet you have your AirPort Extreme, directly connected by Ethernet?

  If this device is actually a combination modem & router, then your extreme must be configured as a bridge. Guest network does NOT work in Bridge mode.

• How can question I change my settings to flash? I said I wanted to be invited to flash store things on my computer but the guests are too frequent and annoying!

  How can I change my settings to flash? I said I wanted to be invited to flash store things on my computer but the guests are too frequent and annoying!

  New versions of Flash have a sign installed on your system for the control of the settings.

  In Windows XP, start > settings > Control Panel > Flash Player, click each tab and change the setting "ask...". ». Most likely your guests are coming in the tab "storage." By using the parameters of "Block"... "can let Flash on some sites.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• How to add the Skype app to the guest account

  Hi all

  Can you please advise on the following questions:

  1. how to add any application like Skype to the guest account
  2. how to add any application like Skype in the Local user account
  3. how to separate the user of Skype from microsoft for the particular user account account so that we can close the session and sign in to SKype with different accounts user we like without registering again with on behalf of microsoft.

  Hello

  As you probably know Toshiba does not support third party applications such as Skype so if you have some problems with Skype or you want to learn more on this subject I recommend you to consult the Archives of Windows on Skype or Skype support directly community.

  Good luck

• Virus or Trojan or something else that will activate the guest account?

  My computer is very slow, and every time I wake it from sleep I notice that the guest account has been enabled.  So I go into Control Panel and then users and groups and disable the guest account unblocking of the user and groups with my password, remove the check mark beside guest account and lock user accounts.  However, even if I am away from my computer, the check mark next to guest account gets back and the guest account enabled.

  Nobody else uses my computer.  Does anyone know of a Virus, Trojan, Bot, or anything else that might be my computer hijacking.  I have ClamXav, but nothing was found after several scans.  Help please.

  It is not a virus. Viruses don't do that sort of thing.

  Earlier, I think I've found that putting on find my Mac would automatically allow the guest account. Not sure if this is still true today. You can check by turning off to find my Mac, disable the guest account and then verify.

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

  Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

  The problem should be solved now.

  Otherwise:

  OS X

  iOS

  Workaround for problems with the Safari address bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.

• If the pc is password protected and the guest account is turned off, a foreign body will have access to the machine or your pc? Help, please

  I want to protect my children from my pc because I don't want to access the net. So I would like to ask if my pc is protected from pw and the guest account is disabled is there another way that my child will be able to access my pc without my supervision?

  Hello

  Here is a very good explanation by Malkeleah and others in the linked Thread that explains that it is virtually impossible to stop a person access to your computer, if they really want.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/need-to-know-how-to-block-Ophcrack-from-running-my/2fe39573-7683-4a1a-A9D2-96764fce1335

  "(N'importe quel ordinateur exécutant un système d'exploitation est accessible par une personne avec 1) access physical;" (2) time; (3) jurisdiction; (4) tools. There are a few things you can do to make it a little more difficult but:

  1. define a password in the BIOS that must be entered before starting the operating system. Also to set the supervisor password in the BIOS so the BIOS configuration cannot be entered without it.

  2. starting at the BIOS, change the order of boot to hard drive first.

  3. set strong passwords on all accounts, including the built-in XP administrator account (it is disabled by default in Vista).

  4. If you leave your own account connected, use Windows key + L to lock the computer (or set the screen/power economy saver) when you step away from the computer and require a password to use.

  5. do the other accounts of users limited in XP Home, regular user accounts in XP Pro. All users must be on a Standard account in Vista with an administrator account used only for purposes of elevation.

  Please understand that these are technical answers to what is essentially a technical problem and there are ways around these precautions. It is a problem of family / interpersonal which cannot be solved by technical means.

  MS - MVP - Elephant Boy computers - don't panic! "

  And read other responses it mention password "Cracking" programs (which it's comments) which are available on Internet and other suggestions.

  See you soon.

• Remove the "Guest" user integrated security group "domain guests.

  We are running Windows Server 2008 R2 Standard.  I accidentally added the "Guest" user built into the 'Domain' security group invited and what you should now remove it to return the settings to how they were before.  However, everytime I try, I get the message...

  'The primary group cannot be removed.  Define another main group if you want to remove this one.'

  I had put the integrated group of "Guests" (including users 'Guests' integrated is a also a member of) to the primary group, however, the ability to set a primary group is grayed out.

  I hope someone has an idea?

  Thank you very much!

  Tim

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/