Connect servers - new

Similar Questions

• Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

  Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

  9.3.3 isn't the latest version of the software for your phone or your Apple TV.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)

• I'm trying to connect a new Iphone to itunes to phone, he told me an I need a newer version of itunes... I later?

  I'm trying to connect a new Iphone to itunes to phone, he told me an I need a newer version of itunes... I later?

  What version of iTunes and Windows you have?  An iPhone IS requires at least iTunes 12.3, which in turn requires at least Windows 7.  Refer to turingtest2 for Windows guide excellent iTunes:

  Troubleshooting problems with iTunes for Windows updates

  See the iTunes installers section.

• I have a connection in New York for seven hours, does anyone know if I have the time to go to an apple store (90-15 Queens Blvd Queens, NY 11373, USA) and update my iphone?

  I have a connection in New York for seven hours, does anyone know if I have the time to go to an apple store (90-15 Queens Blvd Queens, NY 11373, USA) and update my iphone?

  You are a resident of the United States? If not, buy a phone in the United States is a bad idea because the warranty will be valid everywhere where it is you live.

  If you try to buy an iPhone, it is unlikely that you can do the upgrade because most stores are out of stock.

• When I open Firefox, tab keeps flipping quickly between 'Connection' and 'new tab '. The browser does not connect to any site.

  This occurred just after the visit to the site of isohunt. I got a message saying "Firefox stops."

  IsoHunt from installing a program, will you allow?" (or words to that effect). I gave permission then the problem started.
  

  I used Firefox on my iMac for a long time without any problem. I'm running OS X 10.7.5

  I hope you can help

  I have this problem on my pc but I was watching youtube then fallout new vegas nexus so I closed it and then start playing a game, and then when I opened firefox again it was flashing between tap connection and new

• How to connect a new MacBook in my time for the initial file transfer capsule

  How to connect a new MacBook to my existing time capsule to transfer files as part of the first implementation of my MacBook?

  You say that you have a new MacBook and that you have posted to the forum for the retina MacBook 12 "section, but your tag indicates that you have a MacBook Pro. Please specify.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Can I connect a new MacBook Pro to my old but beautiful G5 screen?

  Can I connect a new MacBook Pro to my old but beautiful G5 screen?

  I guess you can connect but it won't show anything of your MBP.

  Here are the criteria of target Display Mode:

  https://support.Apple.com/en-us/HT204592

  Ciao.

• I have 3 PC home networking with a router. How to connect my new hp 6500 has more so any pc can print

  I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.

  Mike4D

  Hello

  You can choose one of the following 2 options:

  

  Option 1: simila in the image above

  Connect the printer to the router,

  Connect a PC to the router (not wireless computer)

  Option 2:

  Connect a PC to the router (not wireless computer)

  Connect the printer to the wireless router

  Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.

  Please use the following book to configure things

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• Photosmart Wireless B109n: Connection printer new source of wireless B109n

  I recently changed provider router and wifi, but it is impossible to get my printer connect the new wi - fi router and allow wireless printing.  So far I have tried the following:

  -All off switching several times and they are restarted in the sequence specified by HP (router, printer, computer)

  -uninstalled and reinstalled the correct HP software via download on the HP site

  -a spent more than an hour with a guy from support from Apple, but we couldn't do the recosnise of the computer the printer

  -went bought a CD player, home, uninstalled the HP software and reinstalled from the disk provided with the printer

  -assemble the complete set

  -been able to print using a cable

  However, I am still unable to connect to the printer and print using wifi.  When I run the wireless network test he told me that the name of the network went from the old router to "hpsetup".

  I can't work out where to enter new information - network name, password etc. - in the installation program or on the printer.  I tried several times to enable the router to allow a device to join the network while pressing the push button on the WEP option.  When I try to use the option to PIN the printer immediately show the pin code of the old wifi network and is still unable to join the new network.

  HP - I started this at 09:00 and it is now 17:00 - things should never be this hard...

  Hello

  Generally no full software functionality is available for your printer for later versions of OS, which means no solution to connect the pritner is offered.

  You can use another computer for example, Windows PC or n older version of OS X to connect to the printer.

  If your router supports WPS method, connect the printer using WPS listed on page 5 of the manual below:
  http://h10032.www1.HP.com/CTG/manual/c01894737

  OtherwiseI can offer the following workaround solution to overcome such a manually:

  1. Make sure that the printer's wireless radio is turned on.
  2. Click the WiFi on your Mac and join the HPSETUP network.
  3. If such a not listed, click on join another network, and then click networks sow and connect to HPSetup.
  4. Open Safari.
  5. Click Safari > Preferences and open the Advanced tab, check both the Hello checkbox on this screen, and then click OK.
  6. In the bookmarks menu, select Hello > printers and click the name of your printer.
  7. Open the network tab or wireless in the wireless Section looking for wireless or Wireless Assistant and follow this screen to connect the printer to your router.
  8. Once done, plug the Mac to your home network and add the printer as in Printers & Scanners.

  Hope that helps,

  Shlomi

• WRT54GL does not connect the new cable Modem

  Hello, I hope someone can help me. I just changed internet providers and my router does not work with the new modem they proived. I had been with ATT and has configured the modem/router ATT to act as a pass through my WRT54GL. Now, when I connect my new modem (which is also a wireless router) to the WRT54GL, I get no connection on the Linksys. However, if I plug in my modem att, resume service (I've not turned my old Internet again until I get this resolved). I tell myself that some setting prevents the WRT54GL to connect but not sure how to determine who it is: I'm not very well informed in this area and only followed a guide online when I configured the router to worek with ATT modem. I'm hoping to avoid resetting the WRT54GL to the deault factory because my old model Roku connects and I cannot change the network, it connects to due to losing the physical remote control. If anyone has any suggestions or can help me trouble shoot, I would really appreciate it!

  HI idkidd,

  You can disable the Wi - Fi modem to avoid any conflict on your Linksys router. And for the WRT54GL work with the new modem, you must reconfigure. The router might still be trying to remember the previous modem settings.

  Try these steps:

  * Connect the computer directly to the modem and check the IP address (Windows) (MAC OSX )

  Note the IP address

  * Now, unplug the modem from the computer

  * Connect the computer to the Ethernet/LAN router (leave the disconnected modem) ports

  * Determine the IP address of the computer, get the router. Then, compare it to the IP address, you have the modem

  * If you get the modem 192.168.1.x and is also the router 192.168.1.x, which means that there is a conflict of IP address

  You can use this link on how to set up the router again with the new set up a router with DSL Internet service Linksys modem

  I hope that these AIDS!

• Suggestions to connect a new router to the Modem to an ISP

  
  

  Quite true for some ISPS like Insight.  Before Comcast took over in the box of my son, he had to go through a documented process of insight to connect any other device (router) Insight to the cable modem.  My experience with RoadRunner TimeWarner/Brighthouse when you connect a new router to their cable modems has been that they will assign a new IP address to the new router and will retain the previous pair of IP/MAC address of my router for 30 days before the purge of their DHCP database.  It is very convenient when I setup the router for my friends and then reconnect my router to the network and get my original IP address assigned.  Once I finished the configuration of the router from my friend and connected to its network access, I contact Brighthouse to let them know that they can release the IP address assigned to the router of my friend.  Not all ISPS is more conciliatory than TimeWarner/Brighthouse in this area.

  I also take advantage of this "ability" to Brighthouse when I test backup WRT54G at my new WiFi E3000 router on a periodic basis.

  In short, always contact your ISP to see what procedures must be followed when you want to connect another router to the modem.

• How can I connect the new installation of Windows 7 for the user profiles on a separate drive har?

  Original title: connect Windows 7 to the output of user profiles?

  I want to reinstall Windows

  My user profiles are on a separate HARD disk
  Is it possible to connect the new install of Win 7 to these existing profiles
  Or I'll create all new profiles and just move all the files manually?

  You can change the registry so that it points to your old profile folder. However, I suspect that this would cause problems because the SID and many registry keys would be incorrect for the current installation. I would like to move the folders manually.

• I'm trying to connect my new tablet from lenovo to WI - FI. I don't remember my password, how can I get a new one?

  I have the SSID number, but don't remember my password for the WI - FI connection. How can I get a new one in order to connect my new tablet to the network?

  Hello Jackie,.

  Thanks for the reply.

  We are pleased to know that the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. Please contact the Windows community.

• connecting the new host of vmfs - what could go wrong?

  I just set up a new server ESXi 4.1, and I want to assign a logical unit number that contains a VMFS (v3.33) data store used by 4 ESXi 4.0 hosts.  I did this procedure several times before (no thanks to the combination of versions of the host, though), but I still get nervous.

  Is there a chance that something bad could happen to my data store when I connect the new host to it, or it's just my OCD Act?

  If you follow the above instructions to Dave, you have nothing to fear - if you take the right approach by being very careful with storage issues.

  Changes in versions should make no difference at all, as long as lon as all the ESX host attached to storage support the version of the data that store connect you.

  Good luck - and don't stress!