Connect the printer to my Apple ipad mini

Similar Questions

• How to fix the bug of 1970 on iPad mini 2

  How to fix the bug of 1970 on iPad mini 2

  It is not a bug. It is the result of a deliberate action by the user. However, some reported that the DFU restore, if it does not, then you must make an appointment at the Genius Bar at the Apple Store closest to him have supported. Apple is working on an update that will prevent users from doing it again. If you changed the date to May 1970 or earlier and he can't restart your iPhone, iPad or iPod touch - Apple Support

• OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

  I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

  I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

  Help, please.

  Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• Connect the printer via the home router

  I have LaserJet CP1525, who has a wireless option... recently I moved my router on the different floor and can not connect to my my wireless home network option trough ethernet cable/router...tried on the printer, but "failed to connect".

  any ideas? Thank you

  Hi BoleczekNieduzy,

  Welcome to the HP Forums.

  I see that you have any questions, set up the printer on the network cable and even the wireless network.
  I will do my best to help you with this problem.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Select the method.

  Uninstall the printer software.
  Insert the software CD into the CD drive.
  Follow the on-screen instructions.

  When you are prompted, select the connection through the wireless network.

  If you're still having problems, restore the default values and follow this method:

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Run the installation again.

  I have provided a document to configure the wireless connection, or you can follow my different methods provided.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable.

  If the Wireless does not always connect, to view these settings on the router.

  You have a double router broadband?
  If it is set to 5 GHZ network, you may need to change to 2.4 GHZ. (rename the 5 GHz or turn it off)
  The WPA key setting must be on AES to work properly not TKIP.
  If it is set to the 64-bit encryption, then change it to 128-bit.
  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the configuration page.

  Please let me know if this is not the problem.

  Have a great day.
  Thank you.

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• has obtained a new wireless network and I can not connect the printer to it.

  I have a photosmart c4780 wireless.  Got a new Airport Express Wireless yesterday.  It is connected to my MacBook Pro without problem, but I can't get the printer to connect to it.

  I have a MacBook Pro, OS v. 10.6.  My HP Photosmart C4780 worked perfectly on my old system wireless (Apple product).  Yesterday I bought a new wireless Airport Express and I can't get the printer to recognize the new system.  Where it shows the name of the printer in the system, the box below (called location) is empty.  I tried to put the name of my Airport in it, but no luck.  I know it just needs to be connected internally somehow, but can't find where the information goes.  I don't have a USB port.  The printer is connected to a modem, and the modem is connected to the radio (is this is what is called the router?) Airport Express - just like it was yesterday when he was working with my old wireless.

• How stop "low on ink to the printer" error message on ipad

  HP Officejet 5470 continues to send a low on ink error message to my IPad. I don't know my printer settings to disable these messagets, help!

  You won't find any printer or the printer settings. AirPrint is a diffuse wifi printing system, so that these messages are actually sent by your printer and simply displayed on your iPad.  Stop messages, to bad draw on the printer itself.  If it is low on ink, then replace cartridges.  If this is not the case, check the printer manual or online support on erasing the incorrect error messages or status.

• I have the AirPlay button on my iPad mini - how it works

  I have AirPlay button on my iPad mini - how does it work?

  Use AirPlay to stream content from your iPhone, iPad or iPod touch - Apple Support Wireless

  (1226)

• Where is the camera flash on my iPad mini?

  Where is the camera flash for iPad mini? Please help me where it is

  The iPad doesn't have a flash.

• What happens if I delete all the data of the Web site on my iPad mini?

  What happens if I select the option DELETE all THE DATA of the WEB site under Safari in the settings on my iPad mini?

  It clears all cookies, data, and the history of Safari.

• OfficeJet 4630: Enter password to connect the printer Wireless - out

  I am at my wits end, HOW to enter a password is a combination of capital LETTERS and numbers - the keyboard does not give me the options that have been suggested for me PLEASE HELP - if I do not have the answer within 30 minutes I have to copy and printing urgent documents offline and bring it to the POST OFFICE

  Download you the manual and read it with a blanket as I just told him? Yes, the printer has WPS, simply follow the instructions in the manual (page 82) to see if get you lucky. The blue wireless light flashing means that you are not connected to your SSID, which basically we knew that routers. Follow the manual and try to connect via WPS, if not read all sections on troubleshooting.

• LaserJet 4050N: cannot connect the printer to the network.

  Hi all

  I recently moved my house, where a new router. My HP LaserJet 4050N was previously connected to my router to another and worked well on the network. However, in my new House and my router (ethernet port connected to the printer) I can't find the printer on the network. I tried to change the IP address, but still when I try to ping, I get the timeout error.

  Help, please.

  Hi Calstar,

  I suggest you uninstall the printer and then reinstall it with the new IP assigned to the printer. Let me know what you find?

• Password to connect the printer to the wireless device

  Nobody knows what the password to default to connect a device like a wireless phone to the PhotoSmart 6525?  Alternatively, how do reset you the password?  I can't find on the touch screen of the printer anywhere.

  Pat

  Hi draftsman,

  I see that you are looking for a way to find the password or clear to the wireless directly on the Photosmart 6525. I managed to find a way to display the password, if it does not you should be able to restore the default values for the network.

  If you select Wireless > wireless Direct > show password, you should be able to see it there. If this does not work, go to Wireless > network by default. Restore the network default settings erases all settings, allowing you to turn Direct wireless and at this time, you can set a new password or not.

  I hope this helps.

• connect the printer to the network

  I can't understand how to connect the HP Deskjet 3070 B611a printer to my wireless network. Cannot find where to insert the name of the network etc. It works perfectly with cable connection.

  I downloaded software printing for Mac air, nothing happened, don't know what to do with it now.

  Any advice?

  Hello

  Page 33 of the below user guide covers the process of wireless connection for this printer.

  http://h10032.www1.HP.com/CTG/manual/c02887357