connect to data mover

Similar Questions

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• Cannot log on to the application designer using id PS while able to connect in data mover.

  Hello
  
  I install peopletool 8.50 (HRMS). I ran successfully all the sql scripts. Run the script DMS as well for the demo database.
  
  When I try to log in the designer of the application using PS/PS I get the following error...
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 404 - ORA-01017: name of user and password invalid. connection refused
  
  while I am able to connect in data mover on Starter bracelet. Can someone help me pls?

  Using Oracle 11 g?

  This could be your problem, SEC_CASE_SENSITIVE_LOGON:
  http://bloggingaboutoracleapplications.org/PeopleTools-and-Oracle-11g-installation-issues/

• VP1 can not connect in data mover

  Hello
  in tools 8.50 on Win 2003, Oracle 10g DB.
  VP1 can not connect. Syadm can connect to Data Mover.
  People can connect via sqlplus.
  
  any idea?
  It must be a problem of role.
  Thank you.

  What kind of application? VP1 is FSCM, CRM and ELM, PS for HCM, PTDEMO for the database of the system Peopletools.
  What is the error message also?

  Nicolas.

• SYSADM is unable to connect to Data Mover

  Hello
  installation CRM88 with the 8.42.15 on a win 2003 Server tools, after the execution of import of Data MOVER as SYSADM, now in the connection of Data Mover as sysadm I get this error message:
  User not authorized for access to PeopleSoft.
  
  Any idea?
  Thank you.

  Next time, I'll give this notice, wait until the following Monday, because the system could rest on weekends.
  :-)

  Nicolas.

• VP1 is unable to connect to Data Mover not at the Application Designer

  Hello
  On 8; 42; 15 tools on a win 2003 server, DB oracle 9i:
  SYSADM can connect via Data Mover, but VP1 can not:
  Invalid user ID and password for the access code.
  
  I don't know password. I've updated with encryption = 0 and password and as sysadm run:
  
  encrypt_password *;
  
  in Data Mover.
  Also:
  SQL > select acctlock from the sysadm.psoprdefn where oprid = 'VP1 ";
  
  ACCTLOCK
  ----------
  0
  
  What else to check.
  
  For the moment unable to connect via the application designer. With the same error message.
  Thanks for the help.

  Have you set the connectid and the connectid Word both in configuration manager (pscfg.exe)?
  Are you able to connect to the database with the people of the user? And be connected with people, able to interview PSSTATUS, PSACCESSPRFL, and PSOPRDEFN (prefixed by the name of the owner of the tables)?
  PS user exist? Is there a table PSDBOWNER containing the name of the database?

  Nicolas.

• Connection Data Mover & Appdesigner problem

  Hello
  
  Enter below the error message mentioned in connection in Data Mover & Appdesigner
  
  "The database is free 8.51. The PeopleTools running require databases during the liberation of 8.52. ».
  
  This error message occurred after completing a 6-15-1 task: filling the Tables in the PeopleSoft database.
  
  Server details:
  
  Peoplesoft FSCM 9.1 Feature Pack 2 version request: V29133-01
  PeopleTools 8.52.11: Patch 14513380
  Oracle DB version: 11.2.0.1.0 - Production
  File/Batch/DB server: 2008
  
  Please advice.
  
  Kind regards
  Vikas
  
  Published by: 973585 on December 14, 2012 22:39

  As Nicolas says you need a short walk over to your PT8.51 database PT8.52.11 of preforms. Rel852n.SQL running is only a first step.
  As described in Chapter 7 finalization of database configuration of the Setup Guide of 8.52 PeopleTools to upgrade your PeopleTools to 8.52.11.

  I still don't understand that you have downloaded FSCM 9.1 Feature Pack 2: V29133-01 and that is comes to 8.51.
  I installed it a month ago and the same installation file was delivered to PT8.52.

  Rather than upgrade your current database to PT8.52.11, I would say to download FSCM 9.1 Feature Pack 2: V29133-01 new and recreate your database.
  Why do I say that?
  Because you clearly have an incorrect download and also missing patches that come preinstalled with FP2 review recut for this purpose.
  Download FSCM 9.1 Feature Pack 2: V29133-01 and recreate your database, this way you ensure that your installation has FP2 and all patches up to FP2 preinstalled. This will save you a lot of time...

  Halin

  Published by: Hakan Biroglu on December 16, 2012 14:17

• Install PT8.53 with Linux problem: unable connect in Bootstrap Mode of Data Mover

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up PeopleTools 8,53 Instance database. Because the Wizard installation problem, I created PeopleTools 8,53 Database Instance PT853 manually. I have run the following scripts:

  (1) utlspace.sql

  (2) dbowner.sql

  (3) psadmin.sql

  (4) psroles.sql

  (5) connect.sql

  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance. I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853

  Connection type: default database

  "TCP/IP Protocol".

  Host: 192.168.196.102

  Port: 1521

  Listener: LISTENER

  Protocol: TCP/IP

  Host: 192.168.196.102

  Port: 1521

  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same as below:

  NET Service Name: PT853

  Protocol: TCP/IP

  The host of the database Machine name: 192.168.196.102

  Port: 1521

  Name of the Basic Service: PT853

  Connection type: default database

  I test the connection using 'SYSADM' and it is successful as well. This means that Windows XP database Client can connect with the server database Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover cannot connect in Bootstrap Mode using "SYSADM". Its details are below:

  Configuration manager:

  Type of database: Oracle

  The database name: PT853

  User ID: SYSADM

  Connect ID: people

  Connect password: people

  Data Mover:

  Type of database: Oracle

  User ID: SYSADM

  Password: SYSADM

  When connect in Bootstrap Mode of Data Mover, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  Based on my understanding, in the Oracle database, the Data Mover Bootstrap mode connection requires a PSDBOWNER table with a 'Database name PT853 and UserID SYSADM' entry.

  The problem is that the PSDBOWNER table doesn't have a line after that I run 5 scripts above. I am looking at runs 5 scripts one by one as below:

  (1) running the utlspace.sql script creates spaces of table 2 (PSTEMP, PSDEFAULT). This script can not create 2 storage spaces. So, I created 2 tablespaces manually.

  (2) running the psdbowner.sql script creates the PSDBOWNER table. This script creates the PSDBOWNER table successfully, but the last line by pressing "connect system/manager", had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (3) running the psroles.sql script created the roles PSUSER and PSADMIN. This script runs successfully without error.

  (4) running the psadmin.sql script creates ownerID SYSADM and ownerID password SYSADM. When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (5) running the connect.sql script creates connectID 'people' and connect password "people." This script runs successfully without error.

  My questions are:

  First of all, in the database Oracle Linux 5 server machine, when I created the instance of database PT853 using DBCA, on the management of the password for the user 'system', I unlocked it and change his password for 'system '. It causes the scripts 'psdbowner.sql' and 'psadmin.sql' got the error "username and password"? If so, how to fix?

  Second, after you run 5 scripts above, why there is no line in the table for Data Mover Bootstrap PSDBOWNER to open a session? How to solve this problem?

  Thirdly, can I just insert a line 'PT853 SYSADM' into the table PSDBOWNER for Data Mover Bootstrap to open a session?

  Thanks in advance.

  By default, the password of the population is peop1e.

  Once more, you shouldn't do anything 'manually' on the database, scripts do everything for you. Unless something is wrong.

  > When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  I really wonder why ignore the error. This meant everything that your system password is not responsible, but something else that you set when creating the database. Never happens to you to check the script before you run it and change it if necessary?

  Nicolas.

• Connection Data Mover by the ID of the operator regarding while finance fbmp mounting

  Hi all
  
  I have a doubt during the installation of the PS FSCM9.1 FP2
  
  We need change dbowner.sql as below, for the installation of the application of finance
  
  set echo on
  coil dbowner.log
  
  GRANT DBA TO VP1 IDENTIFIED BY VP1.
  CONNECT VP1/VP1;
  CREATE TABLE PSDBOWNER (DBNAME VARCHAR2 (8) NOT NULL, OWNERID VARCHAR2 (8) NOT NULL) TABLESPACE PSDEFAULT;
  CREATE A UNIQUE PS_PSDBOWNER ON PSDBOWNER (DBNAME) INDEX TABLESPACE PSDEFAULT;
  CREATE THE PSDBOWNER FOR PSDBOWNER PUBLIC SYNONYM;
  System/CONNECTION Manager;
  REVOKE DBA OF VP1;
  ALTER USER VP1 QUOTA UNLIMITED ON PSDEFAULT;
  
  spool off
  
  PS, I replaced by VP1...
  
  Where is VP1 user enter to play the stage of basic configuration of data i.e., after then after execution of rel851n, gives scripts its written in the installation guide to connect as VP1 of finance.
  
  Please advise I am bit confused...
  
  Published by: asmaa on 5 Sep 2012 16:03

  16.22.58 1-1 opening of session of tuxedo {oprid = "VP1", appname is "Two levels", addr ='/ / TwoTier:7000 ", open to 036AD2F8, pid = 644}
  1-2 16.22.58 0.299000 cur #0.644.FINDM41 RC = 0, hard = 0.043000 create login information = primary, FINDM41, people, handshake = 036CEFE8
  1-3 16.22.58 heart 0.003000 #1.644.notSamTran RC = 0, hard = 0.003000 open the cursor Handle = 036CEFE8
  1-4 16.22.58 heart 0.021000 #1.644.FINDM41 RC = 0, hard = 0.000000 COM Stmt = SELECT OWNERID OF THE PS. PSDBOWNER WHERE DBNAME =: 1
  1-5 16.22.58 0.000000 cur #1.644.FINDM41 RC = 0, hard = 0.000000 type Bind-1 = 2 length = 7 value = FINDM41
  1-6 16.22.58 heart 0.003000 #1.644.FINDM41 RC = 0, hard = 0.000000 Rollback
  1-7 16.22.58 0.001000 cur #1.644.FINDM41 RC = 0, hard = 0.001000 disconnect

  It should not stop here, but rather continues with further tests on PSSTATUS, PSOPRDEFN and PSACCESSPRFL. Maybe your people user has not been granted to read Psalm PSDBOWNER, have you tried since the backend in SQL * more? Please report.

  That said, the "bootstrap" (SYSADM) mode is not possible as part of AppDesigner, and for Data Mover, startup mode and login as a user really have nothing to do with the other. Please refer to an article that I wrote on connectivity:
  http://Gasparotto.blogspot.nl/2010/03/PeopleSoft-database-connectivity-part_28.html

  Nicolas.

• Data Mover, lack of PeopleSoft HCM system database - shows only DMO

  I install HCM 9.2 with PT 8.53 on Windows Server 2008 R2.

  Here's what I've done so far for the installation:

  Binary database Oracle - 64-bit

  Oracle client - 32-bit

  Oracle Database patch (I applied Patch 18940194: ORACLE 11 G 11.2.0.3 PATCH 32 BUG for WINDOWS (64-BIT AMD64 AND INTEL EM64))

  JDK

  WebLogic

  Tuxedo (restart the computer after the installation of Tuxedo)

  PeopleTools 8.53

  Patch PeopleTools (I applied Patch 18495092: PT 8.53.13 PRODUCT PATCH)-minimum 8.53.02 required for HCM9.2

  Install the software of PeopleSoft - HCM 9.2 application

  Configure Configuration Manager

  Install the database

  -CREATEDB10. SQL (as sysdba)

  -UTLSPACE. SQL (as sysdba)

  -DBOWNER. SQL (as sysdba)

  -HCDDL. SQL (as sysdba)

  -PSROLES. SQL (as a manager/system)

  -PSADMIN. SQL (as a manager/system)

  -CONNECT. SQL (as a manager/system) * specify people/peop1e for the username and password login ID

  Now, I'm at the stage where I run Data Mover "Database Setup".  The question is, I don't see the "PeopleSoft HCM SYS to database - US English" option.  I returned and checked my HCM application 9.2 install logs and everything has been installed successfully.  Why is this lack?  Why do I see only the database of demonstration of HCM?  Did I miss a step?  When to update the database to reflect the PT 8.53.13 patch?  At what point can I run HCINSSYS. DMS?

  

  I discovered he is a documented Bug.  Oracle says that when we click on the option button 'System', appears "PeopleSoft HCM Demo Database - US English" but it was typo and it's really the PeopleSoft HCM system database.

  On MOS, see: list of Application Peoplesoft in DB installation appears not HCM HR database

  What points you:

  Bug 16636276 - DCW SAYS DEMO WHEN TRYING to INSTALL the SYSTEM DATABASE

  has been created to solve the problem

• PeopleSoft installation - failed to launch Data Mover

  Hello
  
  Background information:
  
  PeopleTools 8.53
  FSCM 9.1
  Oracle 11.2.0.3 database
  Windows 7 64 bit
  Oracle Linux 6.3 64-bit (on a virtual machine)
  Database demo
  
  I am doing a PeopleSoft installation for the first time. I installed all of the necessary components on my machine Windows and VM Linux on it. I created the demonstration database and when I try to launch Data Mover, I get the following error:
  
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 12154 - ORA-12154: TNS: could not resolve the connect identifier specified
  
  I have an entry for the database in tnsnames.ora. The listener is running and I can't tnsping database. Any ideas?
  
  Thank you
  
  Maya

  I don't know what is ORACLE_HOME regarding your 32-bit client, but clearly when executing sql * more trying to get a file there tnsnames.
  Copy the existing tnsnames.ora from the first to the second directory, try again and do a report.

  Nicolas.

• ORA-12705 unknown or invalid nls parameter during linux Data Mover psdmtx

  Hello. I install the following peoplesoft products:
  
  Tuxedo 10gR 3
  PeopleTools 8.52.00
  HRMS 9.10
  WebLogic 11 GR 1 material
  
  My operating system platform is oracle enterprise linux 6 (2.6.32 - 71.el6.x86_64 #1 SMP). Several houses of oracle database are in place. Oracle 9i, 10g and 11g are all installed in different places on this machine. The operating system oracle and peoplesoft to os account (ex: pshrtest2 - os peoplesoft administrator account) select or choose what version of oracle at the time of the connection; 9i, 10g or 11g. Currently, I am trying to create the HRMS 9.1, database of demonstration of peopletools 8.52 in Oracle 9i. I am familiar with the manual steps of generation of database demonstration using Data Mover (linux: $PS_HOME/bin/psdmtx). This version of demonstration via Data Mover manual step is a failure for the peopletools, 8.50.00, 8.51.00 and 8.52.00, but he managed to previous revisions of peopletools such as 8.48.00, 8.48.10, 8.49.00.
  
  Control Data Mover:
  
  psdmtx CT - ORACLE - CD HRTEST2 - CO SYSADM - CP SYSADM - CW - PEOP1E - FP dbsetup.dms PEOPLE
  
  error of the Data Mover:
  
  PSDMTX error: access code
  Reason: Couldn't sign database HRTEST2 with user SYSADM.
  
  Mover track #1
  file: datamover.trc
  
  ? appsrv.3917 (-1) [27/11/12 00:33:03] (0) used Cache Directory: / media/v02/psoft/hr852test2/PS_CACHE/CACHE/1 /.
  ? appsrv.3917 (-1) [27/11/12 00:33:04] (0) Cur #0.3917.HRTEST2 RC = 12705 hard = 0.432763 create login information = primary, HRTEST2, PEOPLE, handshake = 0000000000000000
  ? appsrv.3917 (-1) [27/11/12 00:33:04] (3) file: error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 12705 - ORA-12705: unknown or invalid NLS parameter value specified
  
  Mover track #2
  
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 PSORA initializing
  PID: 3948 TIMES: killed Nov 27 00:42:17 maximum cursor to initialize PSDB 2012 = 1024
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 environment change: NLS_LANG = AMERICAN_AMERICA. UTF8
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 initialized PSORA
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 PSORA_Initialize() nStatus = 0 0 0
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 attached to the new server HRTEST2 0 9.200000
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 cannot start session
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012: 12705 oracle error code
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 ORA-12705: unknown or invalid NLS parameter value specified
  PID: 3948 TIMES: killing Nov 27 00:42:17 PS-sqlcch (0000000000000000) 2012
  PSDMTX error: access code
  Reason: Could not sign database HRTEST2 with user SYSADM
  
  The linux operating system user account that is used to run Data Mover is, pshrtest2. Via the account of pshrtest2, I am capable of correctly tnsping the HRTEST2 database. I am also able to connect to the HRTEST2 database successfully through sqlplus as follows:
  
  export ORACLE_SID = HRTEST2
  people/peop1e sqlplus
  sqlplus people/peop1e@hrtest2
  sqlplus sysadm/sysadm
  sqlplus sysadm/sysadm@hrtest2
  
  HRTEST2 nls_database_parameters
  
  NAME
  ---------
  HRTEST2
  
  1 selected line.
  
  
  VALUE OF THE PARAMETER
  ------------------------- -----------------------------------
  NLS_LANGUAGE AMERICAN
  NLS_TERRITORY AMERICA
  NLS_CURRENCY $
  NLS_ISO_CURRENCY AMERICA
  NLS_NUMERIC_CHARACTERS.,.
  WE8ISO8859P15 NLS_CHARACTERSET
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT DD-MON-RR
  NLS_DATE_LANGUAGE AMERICAN
  NLS_SORT BINARY
  NLS_TIME_FORMAT HH.MI. SSXFF AM
  NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
  NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
  NLS_DUAL_CURRENCY $
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  NLS_NCHAR_CHARACTERSET AL16UTF16
  NLS_RDBMS_VERSION 9.2.0.4.0
  
  20 selected lines.
  
  Ora-12705 error is only being received from the peopletools 8.50.00 and above (8.50.00, 8.51.00, 8.52.00) revisions. This error is also received through the application server, even if the original demonstration database has not yet been built. This ora-12705 error is not generated in the previous revisions of peopletools (8.48.00, 8.48.10, 8.49.00). What possible environmental settings can be established and used to address this issue (ex: $NLS_LANG, $LANG)?

  Please, Nicolas.

  The construction of database of demonstration on oracle 10g solved the error ora-12705.

• (createvw.dms) stuck for a long time while running data mover

  Hi all
  
  First of all, thank you to all our friends in what have been great in answering all of our questions and help us do our work effectively.
  
  My question:
  
  1. we had installed Peoplesoft HRMS successfully for purposes of demonstration, which works very well.
  2. we followed the same sequence of steps to install Peoplesoft FSCM 9.1 to another Windows 2003 server. We had followed the steps as stated in
  [http://milburytech.blogspot.in/]
  3. we have been checking the logs at regular intervals for errors and comparing with the log files, the HRMS Setup logs, but did not find significant errors.
  4 data mover has worked for more than 16 hours now and has been blocked to "view (s) remaining: 119 creation held AUC_SCR_CHT_VW.
  
  My query:
  
  1 can we kill the data mover and run it once more to continue on the display component to create?
  2. in case if she-error, can we continue without the view 119 remaining being created?
  3. it causes problems (in particular, access associated (as one of my other nationalities, said that they had faced the same question last month and they spontaneous able to connect to the application (as SYSADM) Designer after that they tried to ignore the creation of panoramas).)
  
  
  
  
  
  Kind regards
  Vikram

  Hello

  A stucks Data Mover on the aspect of creating strange view, but it could easily be killed without any problem. Just re - open DMS mode bootstrap and the missing steps:

  REPLACE_VIEW *;
  CREATE_TEMP_TABLE *;
  

  Nicolas.

  PS: SYSADM is a database user and has no right to connect to AppDesigner.

  Published by: Gasparotto N 2 February 2012 09:50

• Upgrade question when on task 2-13-8: running the utility rename Data Mover

  Currently of the problems when you try to perform this task in the wizard to change.  When Assistants change automatically runs the engine program of Application UPG_REN_DMS, that fills the Data Mover rename script.  We eventually found an error.  We really do not understand why this is happening.  We also tried to launch the application in mode of two levels and still get the same error message.

  Upgrade of renaming process started: 2015-05-13 - 09.28.31.000000 (18030,8)

  The D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\rnupgrcdfld.dms file open failed: no such file or directory. (2 633) UPG_RENAMES. Utilities.OnExecute name: openLog statement PCPC:1231: 27

  Called from: UPG_RENAMES. Utilities.OnExecute name: DeleteFile statement: 73

  Called from: UPG_REN_DMS. PRINCIPAL. GBL.default.1900 - 01 - 01.CleanUp2.OnExecute statement: 2

  Game number of messages: 2

  Number of messages: 633

  Reason for the message: the file %1 failed: %2. (2 633)

  Treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Game number of messages: 108

  Number of messages: 524

  Reason for the message: treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Process %s ABENDED to %s.%s.%s (step %s) - RC = %s

  The AE UPR_REN_DMS generates the rnupgrcdfld.dms with data imported from version 9.2 on a previous step. It seems that EI is not able to find the D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\ directory. Please make sure that the directory of output on the tools-> Options - general tab do not have a double slash reverse and also make sure that the directory exists. Please post another reply after the control if you are still not able to execute the step.

• PS - Pt 8.54 - post-installation Data Mover

  Hello

  I have installed PT8.54, created the database for the application, ran 6 required sql scripts.

  now, I logged in Data Mover in bootstrap mode.

  When I start the installation of database, options below appears.

  system:

  PeopleSoft HCM demo database

  The PeopleTools system database

  Demo:

  PeopleSoft HCM demo database

  I installed for the first time on my laptop. I wonder what I have to select the two system databases in Data Mover?

  If I select only demo, I think that I will not configure peopletools system database; Please specify.

  Thank you

  RK

  A demonstration of the system database is a Peoplesoft database without any dummy data, but all the operation generally for purposes of TST, QA and PROD.

  A database system is a database of Peopletools without Peoplesoft module, generally used to performance monitor.

  A demonstration database is a database of Peoplesoft with dummy data for study and demo.

  Choose the one that is more appropriate to the use you want, very probably a demo.

  Finally and above all, whatever you choose, it will install Peopletools, you don't have to install them separately.

  Nicolas.