Connection Data Mover by the ID of the operator regarding while finance fbmp mounting

Similar Questions

• Connection Data Mover & Appdesigner problem

  Hello
  
  Enter below the error message mentioned in connection in Data Mover & Appdesigner
  
  "The database is free 8.51. The PeopleTools running require databases during the liberation of 8.52. ».
  
  This error message occurred after completing a 6-15-1 task: filling the Tables in the PeopleSoft database.
  
  Server details:
  
  Peoplesoft FSCM 9.1 Feature Pack 2 version request: V29133-01
  PeopleTools 8.52.11: Patch 14513380
  Oracle DB version: 11.2.0.1.0 - Production
  File/Batch/DB server: 2008
  
  Please advice.
  
  Kind regards
  Vikas
  
  Published by: 973585 on December 14, 2012 22:39

  As Nicolas says you need a short walk over to your PT8.51 database PT8.52.11 of preforms. Rel852n.SQL running is only a first step.
  As described in Chapter 7 finalization of database configuration of the Setup Guide of 8.52 PeopleTools to upgrade your PeopleTools to 8.52.11.

  I still don't understand that you have downloaded FSCM 9.1 Feature Pack 2: V29133-01 and that is comes to 8.51.
  I installed it a month ago and the same installation file was delivered to PT8.52.

  Rather than upgrade your current database to PT8.52.11, I would say to download FSCM 9.1 Feature Pack 2: V29133-01 new and recreate your database.
  Why do I say that?
  Because you clearly have an incorrect download and also missing patches that come preinstalled with FP2 review recut for this purpose.
  Download FSCM 9.1 Feature Pack 2: V29133-01 and recreate your database, this way you ensure that your installation has FP2 and all patches up to FP2 preinstalled. This will save you a lot of time...

  Halin

  Published by: Hakan Biroglu on December 16, 2012 14:17

• Unable to connect data Explorer to the server InsightCM

  Installed InsightCM without error, connected to the cRIO-9048 and collecting data.  -machine x.x.x.2

  Data Explorer installed without error - machine x.x.x.3 InsightCM

  When to launch Data Explorer get a very bland pop error - up 'impossible to connect to the server of CM OR insight on ' - host name is the host of x.x.x.2.

  A. I executed the following this link http://zone.ni.com/reference/en-XX/help/374419A-01/cmanlsmain/server_connect/

  1. Ask a server administrator to check that NEITHER InsightCM Server is running.
  
  
  2. Make sure that you are connected to a Windows account with permission to access the server directories where NI InsightCM Server stores data files. To check this, ask a server administrator for the location of the network data files, and then try to navigate there in Windows Explorer.
  
  
  3. Ask a server administrator if the NI DataFinder server is running. If the DataFinder server is not running as a service, or if the credentials for the run as service at expiration, the DataFinder server stops and the data Explorer cannot connect.
  
  
  4. If an error indicates that the provision of the equipment is not configured, ask a server administrator to set the page of material available in the Systems Manager.

  B. I checked all the obvious places.

  1. low firewalls completely on the two hosts

  2. network connectivity between two hosts

  3 netstat - na | find "6342' on the hote.2 - it is listening.

  4. ...

  Looking for suggestions on how to troubleshoot (or point out something obvious, if I missed).

  Just need a log file or track of something with a little more substance other than the pop-up.

  Any suggestions are appreciated.

  Thank you

  Danny,

  I reinstalled as an administrator and can now connect to the server InsightCM.

  Thanks for the help and for the additional steps on how to ensure that the registration process is complete.

  Appreciate the prompt response.

  Thank you

  -Beck

• How to connect data Modeler at the Oracle cloud DA Server

  using Version 4.1.0.873

  I think I read many years ago that it was possible

  Thanks for your help

  finally found

  http://www.thatjeffsmith.com/archive/2015/01/uploading-data-to-Oracle-schema-as-a-service-using-Oracle-SQL-Developer/

  see you soon

• the movement of the unusual cursor while typing in ms word

  While typing in ms word, cursor suddenly moves to another location and start typing there. Therefore, I need to see my monitor hit every time as I type. In addition, it makes my slow typing because of spending a lot of time to return the cursor to the original postion. He bathering me. I went to the section mouse of the heart for the edition Control Panel to change the pointer option. It don't did not help me.
  I use windows vista home Edition. I have MS Word 2007.
  Thanking you in advance for the help

  Hey,.

  If the Touchpad is too sensitive and even the slightest brush of the hand or sleeve (wrists) causes the laptop thinking that you "click the mouse". This makes the insertion point jump to where ever the cursor is being located. What you need to do is to go into the setup for the Touchpad and disable the mouse click simulation or change the sensitivity of much lower. that is, if you go to control panel, mouse, you should be able to change the sensitivity of the touchpad or disable the function 'click '. Or if you have an attached external mouse then just turn it off. Reduce the sensitivity option low and verify if you are able to work with Word normally.

  Insert a USB mouse and check if you are facing the issue. If it works great, I recommend you contact your pavement tactile manufacturer for additional support.

  Kind regards

  Yama - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• type of data error during the operation on 11 G less

  Dear expert, can you please check the procedures to follow to see why I get below error
  Only difference in procedures is to 5.6,7 line numbers (fixed less query)
  Procedure a.
  -----------------
  sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
  2 AS v_count NUMBER;
  3 BEGIN
  4. SELECT COUNT (*) IN the v_count OF
  5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner
  6 UNION ALL
  7 SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
  8 IF v_count > 0 THEN
  9 dbms_output.put_line ('-logical ');
  10. OTHER
  11 dbms_output.put_line (' '-OTHER logic ");
  12 END IF;
  13 END compare_schema;
  14.
  
  Created procedure.
  
  Elapsed time: 00:00:00.01
  
  Procedure B
  -----------------
  sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
  2 AS v_count NUMBER;
  3 BEGIN
  4. SELECT COUNT (*) IN the v_count OF
  5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner)
  6 UNION ALL
  7 (SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
  8 IF v_count > 0 THEN
  9 dbms_output.put_line ('-logical ');
  10. OTHER
  11 dbms_output.put_line (' '-OTHER logic ");
  12 END IF;
  13 END compare_schema;
  14.
  
  CAUTION: Procedure created with compilation errors.
  
  Elapsed time: 00:00:00.02
  sys @ > view the error
  Errors in PROCEDURE COMPARE_SCHEMA:
  4/1 PL/SQL: statement ignored
  4/8 PL/SQL: ORA-01790: expression must have the same type of data as
  matching expression

  user507531 wrote:
  Dear expert, can you please check the procedures to follow to see why I get below error
  Only difference in procedures is to 5.6,7 line numbers (fixed less query)
  Procedure a.
  -----------------
  sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
  2 AS v_count NUMBER;
  3 BEGIN
  4. SELECT COUNT (*) IN the v_count OF
  5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner
  6 UNION ALL
  7 SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
  8 IF v_count > 0 THEN
  9 dbms_output.put_line ('-logical ');
  10. OTHER
  11 dbms_output.put_line (' '-OTHER logic ");
  12 END IF;
  13 END compare_schema;
  14.

  Created procedure.

  Elapsed time: 00:00:00.01

  Procedure B
  -----------------
  sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
  2 AS v_count NUMBER;
  3 BEGIN
  4. SELECT COUNT (*) IN the v_count OF
  5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner)
  6 UNION ALL
  7 (SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
  8 IF v_count > 0 THEN
  9 dbms_output.put_line ('-logical ');
  10. OTHER
  11 dbms_output.put_line (' '-OTHER logic ");
  12 END IF;
  13 END compare_schema;
  14.

  CAUTION: Procedure created with compilation errors.

  Elapsed time: 00:00:00.02
  sys @ > view the error
  Errors in PROCEDURE COMPARE_SCHEMA:
  4/1 PL/SQL: statement ignored
  4/8 PL/SQL: ORA-01790: expression must have the same type of data as
  matching expression

  Read it in the form

  select count(*)
    into v_count
    from (select table_name
            from all_tables
           where owner = i_src_owner
          minus
          select table_name
            from all_tables
           where owner = i_tgt_owner)
  
  union all
  
   (select table_name
      from all_tables
     where owner = i_tgt_owner
    minus
    select table_name
      from all_tables
     where owner = i_src_owner);
  

  Do you see it?

• Media Player will not move forward, the picture freezes while the sound continues. Sometimes the image will catch up with the sound, most of the time not. How to fix this?

  After launching a video in Windows Media Player, I tried to jump forward or backward using the "line of play or progress line" at the bottom of the display area. The sound will be either go forward or backward, but the image freezes. Most of the time the image is not catching up with the sound.

  How can I fix that if when I jump the two sound and image to be at the same time?

  Hello

  You can run the fix of the article and then check.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  See also:

  Play an audio or video file

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file

  Play an audio or video file: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• After you install DMO of the Campus, SYSTEM installation, data mover does not show PeopleSoft HRCS Database

  Hello everyone, I did the installation of the PeopleSoft Campus (DMO) instance and it is running now. After that, I started installing the SYS instance, using the same servers: Linux Oracle (database), Oracle, Linux (application server), Windows Server (1 machine) for Installation and Crystal Reports.

  I created a new database named HRMS9SYS without errors.

  Now its time to work with Data Mover. The first task is to use Database Wizard.

  Select target ORACLE database

  type of database to UNICODE

  character set AL32UTF8

  And in the next step Peoplesoft Applications to add

  I see that people US-English database system tools

  Can anyone explain why there are no PeopleSoft HRCS Database - database of PeopleSoft HRCS and English - Spanish?

  These are the same files that I installed the DMO instance...

  Yao,

  (1) be sure that the variable PS_APP_HOME points to the right directory where HCM has been installed (check tab (default) ConfManager/profile / Edit/ProcessScheduler).

  (2) be sure that you have checked the box "Database Peoplesoft HCM" during the installation of the application. Open the HCM_InstallLog.log log file in the directory where you installed the application.

  You can have something like this:

  CHOSEN_FEATURE_LIST = database demo of PeopleSoft HCM

  CHOSEN_INSTALL_FEATURE_LIST = database demo of PeopleSoft HCM

  CHOSEN_INSTALL_SET =

  -Online this means only demo is installed and you can not go for something else (with the exception of Peopletools system database that you don't want).
  If you have a long list of features, make sure that there is something like this:

  CHOSEN_FEATURE_LIST = PeopleSoft absence management,<...snipped for="" reading,="" this="" is="" the="" list="" of="" the="" features="" you="" checked="" when="" installing="" hcm...="">, PeopleSoft HCM Demo Database, database of PeopleSoft HCM

  CHOSEN_INSTALL_FEATURE_LIST = PeopleSoft management of absences,<...snipped for="" reading,="" this="" is="" the="" list="" of="" the="" features="" you="" checked="" when="" installing="" hcm...="">, PeopleSoft HCM Demo Database,database of PeopleSoft HCM

  CHOSEN_INSTALL_SET = PT

  I tested it, if the database of PeopleSoft HCM is disabled during the installation (and consequenty not list features in the log file), there is no option to install a SYS database later.

  If this is the case, you can reinstall the app in the same directory. I don't think it will hurt.

  
  

  HTH,

  Nicolas.

• (createvw.dms) stuck for a long time while running data mover

  Hi all
  
  First of all, thank you to all our friends in what have been great in answering all of our questions and help us do our work effectively.
  
  My question:
  
  1. we had installed Peoplesoft HRMS successfully for purposes of demonstration, which works very well.
  2. we followed the same sequence of steps to install Peoplesoft FSCM 9.1 to another Windows 2003 server. We had followed the steps as stated in
  [http://milburytech.blogspot.in/]
  3. we have been checking the logs at regular intervals for errors and comparing with the log files, the HRMS Setup logs, but did not find significant errors.
  4 data mover has worked for more than 16 hours now and has been blocked to "view (s) remaining: 119 creation held AUC_SCR_CHT_VW.
  
  My query:
  
  1 can we kill the data mover and run it once more to continue on the display component to create?
  2. in case if she-error, can we continue without the view 119 remaining being created?
  3. it causes problems (in particular, access associated (as one of my other nationalities, said that they had faced the same question last month and they spontaneous able to connect to the application (as SYSADM) Designer after that they tried to ignore the creation of panoramas).)
  
  
  
  
  
  Kind regards
  Vikram

  Hello

  A stucks Data Mover on the aspect of creating strange view, but it could easily be killed without any problem. Just re - open DMS mode bootstrap and the missing steps:

  REPLACE_VIEW *;
  CREATE_TEMP_TABLE *;
  

  Nicolas.

  PS: SYSADM is a database user and has no right to connect to AppDesigner.

  Published by: Gasparotto N 2 February 2012 09:50

• PS - Pt 8.54 - post-installation Data Mover

  Hello

  I have installed PT8.54, created the database for the application, ran 6 required sql scripts.

  now, I logged in Data Mover in bootstrap mode.

  When I start the installation of database, options below appears.

  system:

  PeopleSoft HCM demo database

  The PeopleTools system database

  Demo:

  PeopleSoft HCM demo database

  I installed for the first time on my laptop. I wonder what I have to select the two system databases in Data Mover?

  If I select only demo, I think that I will not configure peopletools system database; Please specify.

  Thank you

  RK

  A demonstration of the system database is a Peoplesoft database without any dummy data, but all the operation generally for purposes of TST, QA and PROD.

  A database system is a database of Peopletools without Peoplesoft module, generally used to performance monitor.

  A demonstration database is a database of Peoplesoft with dummy data for study and demo.

  Choose the one that is more appropriate to the use you want, very probably a demo.

  Finally and above all, whatever you choose, it will install Peopletools, you don't have to install them separately.

  Nicolas.

• Problem of Data Mover

  Hello people,
  
  
  Can someone explain this to me:
  
  
  Whenever I run the Data Mover for the installation of the database, in fact it works very well and for a few hours, but my concern is; When I click on anything that this either on the PC I use the Data Mover... it stops responding... something like crash.
  
  
  Why is this happening?
  
  
  When I run the Data Mover, I leave the PC alone intact during these hours... can't do anything else on the PC. This happens to you all out there or just me?
  
  
  Thank you.
  
  
  Kind regards
  
  
  Texas!

  Hello

  I am a newbie. I don't know much on the Data Mover, but I installed Peoplesoft in my laptop.

  When I run scripts in Data Mover, there are a few scripts that should be run for hours. I also felt that she hang up. but actually it was not to hang up.

  If we go into C:\Documents and Settings\COMPNAME\Local Settings\Temp and sort by modified date you will see some file update every second (or a few seconds).

  I hope this helps.

• Cannot log on to the application designer using id PS while able to connect in data mover.

  Hello
  
  I install peopletool 8.50 (HRMS). I ran successfully all the sql scripts. Run the script DMS as well for the demo database.
  
  When I try to log in the designer of the application using PS/PS I get the following error...
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 404 - ORA-01017: name of user and password invalid. connection refused
  
  while I am able to connect in data mover on Starter bracelet. Can someone help me pls?

  Using Oracle 11 g?

  This could be your problem, SEC_CASE_SENSITIVE_LOGON:
  http://bloggingaboutoracleapplications.org/PeopleTools-and-Oracle-11g-installation-issues/

• VP1 is unable to connect to Data Mover not at the Application Designer

  Hello
  On 8; 42; 15 tools on a win 2003 server, DB oracle 9i:
  SYSADM can connect via Data Mover, but VP1 can not:
  Invalid user ID and password for the access code.
  
  I don't know password. I've updated with encryption = 0 and password and as sysadm run:
  
  encrypt_password *;
  
  in Data Mover.
  Also:
  SQL > select acctlock from the sysadm.psoprdefn where oprid = 'VP1 ";
  
  ACCTLOCK
  ----------
  0
  
  What else to check.
  
  For the moment unable to connect via the application designer. With the same error message.
  Thanks for the help.

  Have you set the connectid and the connectid Word both in configuration manager (pscfg.exe)?
  Are you able to connect to the database with the people of the user? And be connected with people, able to interview PSSTATUS, PSACCESSPRFL, and PSOPRDEFN (prefixed by the name of the owner of the tables)?
  PS user exist? Is there a table PSDBOWNER containing the name of the database?

  Nicolas.

• Move the data files on the standby server without moving primary Oracle 11 g r2

  Hi all
  
  
  Oracle 11g 2 with EBS 11.5.0.2 version.
  
  The size of one of the mounting points on the standby is full and I'm going through one of the data files to another mount point without making any changes to the primary level.
  
  I tried Google and came across this link:
  

  http://oraclesea.blogspot.in/2011/12/move-datafiles-on-standby-server.html

  But it did not work... I had to start the database with the spfile to work.
  
  The steps mentioned in the blog:
  

  Include below parameter in standby parameter file
  DB_FILE_NAME_CONVERT = '/primary_location/xyz.dbf','/standby_location/xyz.dbf'
  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE cancel;
  shut immediate
  startup nomount pfile=initSCSL.ora
  alter database mount standby database ;
  alter system set standby_file_management='MANUAL' SCOPE=MEMORY ; 
  ! cp /primary_location/xyz.dbf'  /standby_location/xyz.dbf
  alter database rename file  '/primary_location/xyz.dbf' to '/standby_location/xyz.dbf';
  alter system set standby_file_management='AUTO' SCOPE=MEMORY ; 
  alter database recover managed standby database parallel 4 disconnect from session;

  Can you please help me with the right steps...
  
  
  Concerning
  KK
  
  Edited by: 903150 Sep 26, 2012 22:41

  Here is an example for you.

  Database pending:

  SQL> select status,instance_name,database_role from v$database,v$instance;
  
  STATUS       INSTANCE_NAME    DATABASE_ROLE
  ------------ ---------------- ----------------
  OPEN         srprim           PHYSICAL STANDBY
  
  SQL> select file_name from dba_data_files;
  
  FILE_NAME
  --------------------------------------------------------------------------------
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\UNDOTBS01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSAUX01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSTEM01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS02.DBF
  
  SQL> select process,status,sequence# from v$managed_standby;
  
  PROCESS   STATUS        SEQUENCE#
  --------- ------------ ----------
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  RFS       IDLE                  0
  RFS       IDLE                154
  MRP0      WAIT_FOR_LOG        154
  
  7 rows selected.
  
  SQL> show parameter name_convert
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  db_file_name_convert                 string
  log_file_name_convert                string
  SQL> alter database recover managed standby database cancel;
  
  Database altered.
  
  SQL> shut immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> exit
  Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  M:\>copy C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS02.DBF C:\APP\SHIVANANDA.RAO\ORADATA\DBTEST\USERS02.DBF
  1 file(s) copied.
  
  M:\>sqlplus sys/oracle@srprim as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Thu Sep 27 14:57:16 2012
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> startup mount
  ORACLE instance started.
  
  Total System Global Area  778387456 bytes
  Fixed Size                  1374808 bytes
  Variable Size             494929320 bytes
  Database Buffers          276824064 bytes
  Redo Buffers                5259264 bytes
  Database mounted.
  SQL> alter system set standby_file_management=manual;
  
  System altered.
  
  SQL> alter database rename file 'C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS02.DBF' to 'C:\APP\SHIVANANDA.RAO\ORADA
  A\DBTEST\USERS02.DBF';
  
  Database altered.
  
  SQL> alter database recover managed standby database disconnect from session;
  
  Database altered.
  
  SQL> select process,status,sequence# from v$managed_standby;
  
  PROCESS   STATUS        SEQUENCE#
  --------- ------------ ----------
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  RFS       IDLE                  0
  RFS       IDLE                155
  MRP0      WAIT_FOR_LOG        155
  
  7 rows selected.
  
  SQL> select name from v$datafile;
  
  NAME
  --------------------------------------------------
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSTEM01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\SYSAUX01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\UNDOTBS01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\SRPRIM\USERS01.DBF
  C:\APP\SHIVANANDA.RAO\ORADATA\DBTEST\USERS02.DBF
  

  1. you must close the database pending.
  2 copy the file that you want to move to the different mount point using the OS commands.
  3. Mount the standby database.
  4 rename the data through database level. Make sure that the standby_file_management is set to MANUAL
  5. start the MRP on the standby database.

  Please do not use more than one response to the thread ID. Because you created this thread with ID 903150, I propose to answer with the same ID, not the ID of the other.