Connect to local USB via the vmware infrastructure client

Similar Questions

• Possible to download only the VMware Infrastructure Client?

  I am a student, our University has a vmware server we can connect using what, in my view, is called the "VMware Infrastructure Client" of our school computer lab and I was told that you can also download the same client to connect from our own pc at home. (We use a VPN). I've been looking around this site, and no where do not see just a simple download for only Vmware Infrastructure Client, I think that's what I use to connect to the server, our school has running vmware. I tried a few free vmware download from this site, and they seem to be 600 MB + packages with many, many zipped files, not just a simple client that I'm looking for.

  Can someone tell me if there is a way to download a customer of VMware infrastrue, UPS said, and if that sounds right, then I could use to connect to a server on a network running vmware.

  Basically, I have the IP of our server of schools and a user name and password I use to connect to it, but I need to find and install the vmware client to connect to it.

  Hello and welcome to the forums.

  Use a web browser and open https://schools-vmware-server-ip and you should be able to download the client here.

  Good luck!

• The VMware Infrastructure client error when connected to vcenter

  Hi, I have a Vcenter 4 server that is installed on a windows 2003. When I go to the web page to download Vsphere client, this is excellent work.

  But when I start the vsphere client and some plugins are able, when I leave the client got an access violation error

  If I disable all plugins, I didn't have this error. I try one by one but no matter the option activate plugins, if switch 1 is activated, this error occurs.

  I have this error on the vcenter server directly and on my desktop when I leave the vsphere client.

  Does anyone know why this error occurs when the plugins is enabled.

  If I connect the client directly to an ESX Server, not on what the server vcenter, the error is displayed

  I thank.

  Hello.

  Have you seen this discussion?

  Good luck!

• Local host for VMware Infrastructure Client permissions

  We normally use vcenter 2.5 and ESX 3.5. Our user permissions are set on vcenter, using Active Directory.

  However when vcenter is out of service, we can connect locally to each esx host using the VMware Infrastructure client. Logging as root works very well. However, we have several local nonroot accounts defined on the ESX host.

  How can we give users permission to open a session? We want to be administrators on the graphical interface, but does not give the root password.

  As root, you will need to identify yourself with the VI Client and assign permissions to non-root users to access environment - but caution that you do not have the granularity of permissions, as you do with VC and if these hosts are managed by CR you do not want to make changes to them directly as this may affest DRS and HA-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• VMWare Infrastructure Client Login - password

  I have to connect to the VMWare Infrastructure Client by using domain administrator credentials.  Recently, I changed the password of admin area, but I can connect in CIV with the old and the new password?  Y at - it a cache of passwords somewhere that would need to be deleted?  The VIC is not integrated with Active Directory?

  Do you chamge the local administrator on the VC server password? I think that's where it comes from.

  If you find or any other response usefule please consider giving points by checking the correct or helpful answer

• Questions of VMware Infrastructure Client License

  I have a few questions about lincesnese EXS3.5 and VMIC

  I downloaded the vmware infrastructure client to manage it and gives me the following on the VirtualCenter server warning.

  I see the following on top of VMIC software

  localhost.localdomain ESXserver3.5.0...: "assessment 5 days remaining.

  Also, it appears an aboutVirtual Center Server warning

  Is ESX3.5i my unregistered server or my client infrastructure?

  I was under the impression that VMIC and ESX3.5i are free tools?

  Is it not the case?

  Also, what is the relationship between the server, VirtualCenter and ESX3.5i and VMIC?

  If someone can point to explanations on this, it will be a great help.

  And don't somefeatures disappear after assessment?

  Thanks in advance

  Nicole Mun

  NicoleMun wrote:

  I have a few questions about lincesnese EXS3.5 and VMIC

  I downloaded the vmware infrastructure client to manage it and gives me the following on the VirtualCenter server warning.

  I see the following on top of VMIC software

  localhost.localdomain ESXserver3.5.0...: "assessment 5 days remaining.

  Also, it appears an aboutVirtual Center Server warning

  Is ESX3.5i my unregistered server or my client infrastructure?

  Your ESX3.5i server is not functional in eval mode. It is a free product, but you must obtain and enter a license key. You should have received this once you download the software from vmware.

  I was under the impression that VMIC and ESX3.5i are free tools?

  They are both.

  Is it not the case?

  Yes they are free, but you must enter the free license key that you received from vmware. It has been some time, I do not remember if I have received me by e-mail or on the download page.

  Also, what is the relationship between the server, VirtualCenter and ESX3.5i and VMIC?

  vCenter (VirtualCenter server) is the management server can manage multiple ESX/ESXi hosts at once. It also provides some additional features, such as vmotion, integration with active directory, etc. - it is not free

  ESX3.5I is one of the hypervisor servers based that you run your virtual machines on - it's free, but you need to get your free license key.

  VMIC is the client software that you use to connect to vCenter or ESX/ESXi host to manage your virtual environment, including the ESXi host. -free and can be downloaded for the guests, once installed ESX.

  If someone can point to explanations on this, it will be a great help.

  And don't somefeatures disappear after assessment?

  Yes.

  Thanks in advance

  Nicole Mun

  -

• not getting does not clone/update with VMware Infrastructure client option

  Hi we have an esx3.5 with VIM 2.5

  to authorize the server through a host file, that we had to create a virtual machine on the esx server and install VIM 2.5 above, pointing licensing to the ip address of this server. This vm is winXP so everything works fine.

  When we try to connect to the ip address of the winVista esx server, we get a Manager, without options - clone/updates

  Therefore, in order to make any kind of cloning or updates remotely of machines WinVista you must:

  create a VPN connection on the site with the esx server,

  Connect to the ip address of the esx server,

  Open the VMware Infrastructure client,

  opening of session

  Open the console of the computer that has installed VIM 2.5

  and perform a cloning from inside the virtual Windows XP machine

  as you can see it's pretty heavy. is there another way?

  Thank you!

  Because if I understand your message, you don't see the "Clone/Update" option in the menu when you connect thru customer VI ESX Server. Yes, this isn't. ESX does not provide the functionality without VirtualCenter. Then, must use VirtualCenter, address IP/Hostname in the VI Client to accomplished these tasks.

  Shan

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

• VMware Infrastructure Client for Mac?

  Currently, I run VMware Infrastructure Client in a virtual machine on my Mac, or use to connect to a computer where the client is installed. It would be nice to have a Mac-native of the Infrastructure Client version. Are there plans to make benefit the VMware Infrastructure Client Mac OS X?

  /Michael L.

  Hello

  Does not yet exist.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• State of the listed material unknown state via API, not so much using VMware Infrastructure Client

  Anyone know if it is a result of ESXi vs say Foundation, company, etc.?  Querying the State of the material using the perl Toolbox storage devices returned the status of "unknown".  While the use of the Windows infrastructure client under 'configuration' then 'State of health', storage devices are listed as with the lights green and 'Normal '.

  through perl toolkit, for example:

  print join ("\t", $host - & gt; name, $hba - & gt; device, $hba - & gt; key, $hba - & gt; model, $hba - & gt; status, $hba - & gt; pilot, $hba - & gt; bus). "\t";

  foo.com vmhba32 key - vim.host.ParallelScsiHba - 4 port SATA IDE Controller (ICH9) vmhba32 unknown ata_piix 0

  To obtain the status of storage devices, as seen in VI Client, you must watch HostStorageElementInfo API. This API gives the State of operation of the various components of storage. To access data from this API, you need to drill down to the next of the object "HostSystem: property

  runtime.healthSystemRuntime.hardwareStatusInfo.storageStatusInfo

  This will give the HostStorageElementInfo table and held the State values, as seen in the VI client.

  Hope this information is useful.

• VMware Infrastructure Client Gets an error when you try to connect to "localhost".

  Until a few days ago everything was fine, we have created a virtual machine, installed a vm client infrastructure, and used to manage the esx 3.5 Server

  in some way the connection to the server was interrupted, we rebooted the client infrastructure and tried to connect to 'localhost', got the following error: Vmware infrastructure Client could not connect inintial with the server 'localhost '.

  interesting part is that the client connects fine when we connect to the server ip: 192.xxx.xxx.xxx

  However, when we replace the IP by 'localhost', we get the error: Vmware infrastructure Client could not connect inintial with the server 'localhost '.

  tried rebooting the machine, always not the same error

  any ideas?

  before we connected to localhost and had a capacity to use plugins as well as manage other servers

  Ah, now I see.  is vCenter service running?  Try to restart the service.  I think that the vCenter service has a problem, it is important connect directly to ESX server instead of using virtual center.

• Unable to connect via the Cisco VPN Client

  Hello

  I have configured remote access VPN to ASA and tries to connect via the Cisco VPN Client 5.0

  I am not able to connect and watch the journal on the SAA

  ASA-3-713902: Group = xxxxx, IP = x.x.x.x, withdrawal homologous peer table is placed, no match!

  ASA-4-713903: Group = xxxxx, IP x.x.x.x, error: impossible to rmeove PeerTblEntry

  ASA does not support the K9 i.e. VPN - DES is enabled and VPN-3DES-AES is disabled.

  What could be the reason.

  Concerning

  Hi, I had this same problem, here is the solution:

  When you perform a debug crypto isakmp 255, so you see that the cisco vpn client does not support SHA +, you must use MD5 + AN or sha with 3DES/AES.

  Be careful, this debugging is very talkative, but that's the only way I found to get ITS proposal on debugging.

  Well, change your strategy using MD5 isakmp / OF would do the trick.

• Cannot connect directly to Esx via the vSphere Client.

  Hello

  I can not connect directly to ESX through the le VSphere client. I have the following message:

  "Can not connect to "xxx"vSphere Client. Un unknown connection error has occurred. (

  The customer not able to send a complete application on the server. (Underlying connection was closed. An unexpected error has occurred when sending.)). »

  
  

  Le ESX reply to ping et name resolution are correct. They are seen by the vCenter and sshh connection to ESX is possible.

  
  

  Version: Esxi, 5.5.0, 1892794

  VSphere Client 5.5.0, 1880841 on Windows XP SP3
  

  
  

  Thank you for your help

  Have a look here: vSphere Client 5.5 and WindowsXP/Windows2003 & #8211; Unknown connection error & laquo; Mike Landry & #8230;

• Fatal error VMware Infrastructure Client

  Hello.

  I use vSphere Client (version 4.1.0 build 258902) and vCenter Server (version 4.0.0 build 208111) with an IBM BladeCenter.  I am trying to download files on a satastore, but just as he begins to transfer I get this error and closes the client:

  VMware Infrastructure Client fatal error: (app-4048) <-this number changes every time, it's never the same

  Exception 0 x 80000003 (debug break point) has occurred.

  A core file is available in "C:\users\Dave\AppData\Roaming\VMware\vpxclient-3784.dmp".  Please

  ask for support and include the content of the core file.

  To collect the data to submit to the VMware support, run 'vm-support.

  We will respond on the basis of your entitlement to support.

  I get this error, regardless of the OS (tried Windows XP and 7), logged-in user or data store used (we have about 8).  Fails also on local storage for the blade so it can not be anything to do with the fiber storage attached.

  Anyone hit this problem before and have a solution?

  Thank you very much

  Dave

  If you use vCenter 4.0 I advise to use the same version for vSphere client because there has been some problems with the customer for 4.1 when used with mixed versions of ESX

  Let us know your results.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  f 10.

  VCP3, VCP4, HPCP, HP UX CSA

  http://KB.VMware.com/

• Which TCP port is used for VMWare Infrastructure Client?

  Hello, my ESXi server sits on the private network, and I'm trying to PAT so that I can access the external network using VMWare Infrastructure Client Server. Does anyone know what port is VMWare Infrastructure Client listen? Thank you.

  Priscilla

  Do the external network for VMware NAT

  I guess you mean that your server is located in the internal network and Client is on the outside.

  If the customer does not have to "listen" for connections it opens TCP ports - HI 1024-65535 to servers as follows.

  Servers (including GSX) TCP ports: 8222, 8333, 902

  If you have ESX (i) then TCP ports: 80, 443, 902

  T:OMI

  Psalm Points, please

• VMware Infrastructure Client hanging

  Hi guys,.

  IM new to the world of VMware sorry, I have a server ESX 3.5.0 Build 82663 on a Dell Poweredge 2950 Server VMware Infrastructure Client 2.5.0 build 84767 on a Dell Insperon running Windows 7 workstation, the question I have is that the VIC has recently started to hang when I try to shoot to the top of the list of the VM on the ESX Server machines. The only way I found to fix it is to reboot physically the ESX Server and then I can reconnect the VIC and get the list and start all the VM images on it, but sometimes it will freeze just when starting a picture and if I click on the power on option, once again, I get a message indicating that you cannot start a power on operation when it is being , and then I'm back to square one where the VIC is frozen again.

  Is it possible to restart the game VIC in the ESX box without having to restart the ESX Server?

  Thanks in advance

  Werner

  How much memory you have configured for the service console? Perhaps, if this isn't there, set up to 800MB.  In addition, confirmed the same behavior by launching the VIC from another post of work?