Which TCP port is used for VMWare Infrastructure Client?

Similar Questions

• Local host for VMware Infrastructure Client permissions

  We normally use vcenter 2.5 and ESX 3.5. Our user permissions are set on vcenter, using Active Directory.

  However when vcenter is out of service, we can connect locally to each esx host using the VMware Infrastructure client. Logging as root works very well. However, we have several local nonroot accounts defined on the ESX host.

  How can we give users permission to open a session? We want to be administrators on the graphical interface, but does not give the root password.

  As root, you will need to identify yourself with the VI Client and assign permissions to non-root users to access environment - but caution that you do not have the granularity of permissions, as you do with VC and if these hosts are managed by CR you do not want to make changes to them directly as this may affest DRS and HA-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• No matter which usb port I use for a usb hub

  I have a compac presario CQ60-215DX notebook and I want to install a usb hub. No matter which usb port I use? would also like to know if it is necessary to remove it to restart my computer"

  Thanks for any help.

  Karen

  The only time you usually get trouble with USB ports is when you mix both USB 3.0 and USB 2.0 devices.

  • For all USB 3.0 is backward compatible, it is simply not the case that all the older devices are USB 3.0 compatible.  If you have a problem with an older device, consider that it may be because it is plugged into a USB 3.0 hub / port.
  • Not all hubs are created equal.  If you try to run some devices high speed (things you plug a hub) on a lower speed (2.0) turntable, they may lose the integrity of the data (Act funny) or refuse to perform certain tasks (depending on the device).  These devices may work best when it is plugged directly into the computer no matter that they are running as the USB 3.0 or USB 2.0.  It is not, therefore, necessarily what port the hub is connected - rather, it could be the hub itself (if you have problems).

  Peripheral USB could better with a reboot - some may not reset at all without rebooting.  A USB hub, one of the simplest types - these are usually plug-and-play.  That's all that is connected to the hub, which could be the determining factor for the restart.  It's Windows - it is always better to restart when things change.

• Ports and Destination for VMware View Client

  Hi all

  I'm looking for a quick bit of help if possible please...

  Environment: VMware View 4.5

  Question / Info needed:

  Two companies having a bond of trust between data transfer etc. and resources share. We need access to a site through their firewall in the bond of trust to connect to the VMware View VDI Office.  Customers using VMware View Client.

  The question is, if we get the site to enable port 443 to our broker connection I assume this will not be enough?  It must be possible to:

  443 to connection broker

  32111 (redirect USB) to?

  9427 (multimedia redirection) to?

  4172 (PCoIP) to?

  3389 (RDP if used) to?

  This may all sound a bit novicy but I need to be 100% before you go test.

  Thanks in advance.

  So using the brokers of the connection in direct mode without any security server.   I think that it would look like this.

  443 to connection broker

  32111 VDI Desktop

  9427 multimedia redirection) to?

  4172 VDI Desktop

  3389 VDI Desktop

• Update 3 for vmware Infrastructure 3 is a comprehensive update?

  Is update 3 for vmware Infrastructure 3, a comprehensive update or should I install the update 1 and day 2 first?

  I believe that if you apply the update 3 with the Update Manager and then rescan with your baseline, you will see fewer missing updates.  It should take care of all update 1 and day 2 patches.  If you want to apply update 3 make sure to run all of the patches that have been released since then as well, there are a few recent bugfixes of update 3.

  If all goes well with this number of hosts you can eliminate the time instead of reduce, if you have the DRS in fully automatic mode when you use the Manager to update to migrate the guests off the coast to other hosts for you while patch.

• Under which community should I use for apple store questions?

  Under which community should I use for apple store questions?

  I need to get my Bill for a 5s iphone that is more than 18 months.

• Qosmio G40 - which driver can be used for remote control?

  Hello

  Which driver should I use for remote control?

  How to configure with the PC?

  Thank you very much.

  I assume that you need remote control manager.
  This tool is preinstalled on your Qosmio laptop?

• VMware Infrastructure Client for Mac?

  Currently, I run VMware Infrastructure Client in a virtual machine on my Mac, or use to connect to a computer where the client is installed. It would be nice to have a Mac-native of the Infrastructure Client version. Are there plans to make benefit the VMware Infrastructure Client Mac OS X?

  /Michael L.

  Hello

  Does not yet exist.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Best Linux o/s to be used for VMWare Server 2

  Hi guys,.

  What would be the best Linux o/s to be used for VMWare Server 2 and why?

  Are there known traps or other questions that you may have experienced with some operating systems.

  Thanks for the comments.

  I don't know about the 'best' that I only use openSUSE x 64 but I find it incredibly stable and reliable, especially when compared to a lot of Vista (out of production). Image single with 8 GB disks and non - RAID SATA with usually about 10 virtual machines running constantly. CentOS and Ubuntu seem to appear a lot here, but that could be wrong, since people in general do not post when things are working very well. Fedora seems to have arisen recently with more than its share of problems.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Fatal error VMware Infrastructure Client

  Hello.

  I use vSphere Client (version 4.1.0 build 258902) and vCenter Server (version 4.0.0 build 208111) with an IBM BladeCenter.  I am trying to download files on a satastore, but just as he begins to transfer I get this error and closes the client:

  VMware Infrastructure Client fatal error: (app-4048) <-this number changes every time, it's never the same

  Exception 0 x 80000003 (debug break point) has occurred.

  A core file is available in "C:\users\Dave\AppData\Roaming\VMware\vpxclient-3784.dmp".  Please

  ask for support and include the content of the core file.

  To collect the data to submit to the VMware support, run 'vm-support.

  We will respond on the basis of your entitlement to support.

  I get this error, regardless of the OS (tried Windows XP and 7), logged-in user or data store used (we have about 8).  Fails also on local storage for the blade so it can not be anything to do with the fiber storage attached.

  Anyone hit this problem before and have a solution?

  Thank you very much

  Dave

  If you use vCenter 4.0 I advise to use the same version for vSphere client because there has been some problems with the customer for 4.1 when used with mixed versions of ESX

  Let us know your results.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  f 10.

  VCP3, VCP4, HPCP, HP UX CSA

  http://KB.VMware.com/

• Questions of VMware Infrastructure Client License

  I have a few questions about lincesnese EXS3.5 and VMIC

  I downloaded the vmware infrastructure client to manage it and gives me the following on the VirtualCenter server warning.

  I see the following on top of VMIC software

  localhost.localdomain ESXserver3.5.0...: "assessment 5 days remaining.

  Also, it appears an aboutVirtual Center Server warning

  Is ESX3.5i my unregistered server or my client infrastructure?

  I was under the impression that VMIC and ESX3.5i are free tools?

  Is it not the case?

  Also, what is the relationship between the server, VirtualCenter and ESX3.5i and VMIC?

  If someone can point to explanations on this, it will be a great help.

  And don't somefeatures disappear after assessment?

  Thanks in advance

  Nicole Mun

  NicoleMun wrote:

  I have a few questions about lincesnese EXS3.5 and VMIC

  I downloaded the vmware infrastructure client to manage it and gives me the following on the VirtualCenter server warning.

  I see the following on top of VMIC software

  localhost.localdomain ESXserver3.5.0...: "assessment 5 days remaining.

  Also, it appears an aboutVirtual Center Server warning

  Is ESX3.5i my unregistered server or my client infrastructure?

  Your ESX3.5i server is not functional in eval mode. It is a free product, but you must obtain and enter a license key. You should have received this once you download the software from vmware.

  I was under the impression that VMIC and ESX3.5i are free tools?

  They are both.

  Is it not the case?

  Yes they are free, but you must enter the free license key that you received from vmware. It has been some time, I do not remember if I have received me by e-mail or on the download page.

  Also, what is the relationship between the server, VirtualCenter and ESX3.5i and VMIC?

  vCenter (VirtualCenter server) is the management server can manage multiple ESX/ESXi hosts at once. It also provides some additional features, such as vmotion, integration with active directory, etc. - it is not free

  ESX3.5I is one of the hypervisor servers based that you run your virtual machines on - it's free, but you need to get your free license key.

  VMIC is the client software that you use to connect to vCenter or ESX/ESXi host to manage your virtual environment, including the ESXi host. -free and can be downloaded for the guests, once installed ESX.

  If someone can point to explanations on this, it will be a great help.

  And don't somefeatures disappear after assessment?

  Yes.

  Thanks in advance

  Nicole Mun

  -

• Possible to download only the VMware Infrastructure Client?

  I am a student, our University has a vmware server we can connect using what, in my view, is called the "VMware Infrastructure Client" of our school computer lab and I was told that you can also download the same client to connect from our own pc at home. (We use a VPN). I've been looking around this site, and no where do not see just a simple download for only Vmware Infrastructure Client, I think that's what I use to connect to the server, our school has running vmware. I tried a few free vmware download from this site, and they seem to be 600 MB + packages with many, many zipped files, not just a simple client that I'm looking for.

  Can someone tell me if there is a way to download a customer of VMware infrastrue, UPS said, and if that sounds right, then I could use to connect to a server on a network running vmware.

  Basically, I have the IP of our server of schools and a user name and password I use to connect to it, but I need to find and install the vmware client to connect to it.

  Hello and welcome to the forums.

  Use a web browser and open https://schools-vmware-server-ip and you should be able to download the client here.

  Good luck!

• VMware Infrastructure Client hanging

  Hi guys,.

  IM new to the world of VMware sorry, I have a server ESX 3.5.0 Build 82663 on a Dell Poweredge 2950 Server VMware Infrastructure Client 2.5.0 build 84767 on a Dell Insperon running Windows 7 workstation, the question I have is that the VIC has recently started to hang when I try to shoot to the top of the list of the VM on the ESX Server machines. The only way I found to fix it is to reboot physically the ESX Server and then I can reconnect the VIC and get the list and start all the VM images on it, but sometimes it will freeze just when starting a picture and if I click on the power on option, once again, I get a message indicating that you cannot start a power on operation when it is being , and then I'm back to square one where the VIC is frozen again.

  Is it possible to restart the game VIC in the ESX box without having to restart the ESX Server?

  Thanks in advance

  Werner

  How much memory you have configured for the service console? Perhaps, if this isn't there, set up to 800MB.  In addition, confirmed the same behavior by launching the VIC from another post of work?

• not getting does not clone/update with VMware Infrastructure client option

  Hi we have an esx3.5 with VIM 2.5

  to authorize the server through a host file, that we had to create a virtual machine on the esx server and install VIM 2.5 above, pointing licensing to the ip address of this server. This vm is winXP so everything works fine.

  When we try to connect to the ip address of the winVista esx server, we get a Manager, without options - clone/updates

  Therefore, in order to make any kind of cloning or updates remotely of machines WinVista you must:

  create a VPN connection on the site with the esx server,

  Connect to the ip address of the esx server,

  Open the VMware Infrastructure client,

  opening of session

  Open the console of the computer that has installed VIM 2.5

  and perform a cloning from inside the virtual Windows XP machine

  as you can see it's pretty heavy. is there another way?

  Thank you!

  Because if I understand your message, you don't see the "Clone/Update" option in the menu when you connect thru customer VI ESX Server. Yes, this isn't. ESX does not provide the functionality without VirtualCenter. Then, must use VirtualCenter, address IP/Hostname in the VI Client to accomplished these tasks.

  Shan

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

• VMware Infrastructure Client Gets an error when you try to connect to "localhost".

  Until a few days ago everything was fine, we have created a virtual machine, installed a vm client infrastructure, and used to manage the esx 3.5 Server

  in some way the connection to the server was interrupted, we rebooted the client infrastructure and tried to connect to 'localhost', got the following error: Vmware infrastructure Client could not connect inintial with the server 'localhost '.

  interesting part is that the client connects fine when we connect to the server ip: 192.xxx.xxx.xxx

  However, when we replace the IP by 'localhost', we get the error: Vmware infrastructure Client could not connect inintial with the server 'localhost '.

  tried rebooting the machine, always not the same error

  any ideas?

  before we connected to localhost and had a capacity to use plugins as well as manage other servers

  Ah, now I see.  is vCenter service running?  Try to restart the service.  I think that the vCenter service has a problem, it is important connect directly to ESX server instead of using virtual center.