Connect to the remote server without giving the SYSDBA password

Similar Questions

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• CS6 Dw hangs when it is connected to a remote server

  Hi all

  First of all, thanks to all those who have contributed here I found a ton of useful info on these forums.

  I am facing a problem that has been around for awhile, but I'm afraid, I was unable to find a solution. Dreamweaver (CS6) is very slow/unresponsive in work as part of a 'Site' connected to a remote server. The weird part is that this happens only on my laptop, the feature works fine on my desktop PC which has almost identical characteristics except that my laptop is 100% SSD (you would think it would be more efficient). It hangs for a few seconds when you save a file, which IMO is acceptable, I understand that it is pushing it to the server. The real problem comes when I'm switching between open files, or open a new file. Two of these actions take about 10-15 seconds, during which Dreamweaver has a crisis and I get notification (no response) in the bar of the window.

  Dreamweaver is updated, I use no archiving/retrieval functionality. In the server settings, I have «automatically download to the server after...» "and"Maintain synchronization information"checked.  Ftp services work perfectly with my remote server, Notepad ++ also works very well.

  PC card in case it is important: (laptop is almost two years but decent hardware and short grand otherwise)

  ASUS

  Windows 10

  I7

  Samsung 500GB SSD

  8 GB RAM

  NOTE: in addition, once the file is actually opened and loaded, DW works fine; no lag, no hanging. It is the Act of switching/opening files (file at the top of DW tabs) which takes forever. Economy/downloading files takes less than 5 seconds and during this time, you see the download dialog box and DW does NOT get the "(ne répond pas) ' as it does when switching/opening files."

  Any suggestions on fixing this?

  Best regards

  Alex Overton

  Dreamweaver is designed to operate on local files that you upload to the remote server when you are finished editing the. I don't have CS6 installed, but I think he allowed you to work on individual files without defining a site beforehand, and some people used it to edit files in situs, that is what it looks like you do. It is no longer possible in Dreamweaver CM³. You must define a site to be able to edit a file.

  Dreamweaver CS6 is is no longer officially supported. If it works well otherwise, I think that you'll just have to consider this shift as a reality. You access files on a network link, so there is a latency. Why it happens on one machine but not another is a mystery.

• Unable to connect to a remote server?

  I've been connecting to my remote server when you use Dreamweaver for several years. Today, I received the following error message:

  An FTP error occurred - cannot connect to the host.

  Maximum number of users reach or not authorized to make the connection because of local firewall does not block FTP data.

  My firewall is off and I can't connect to my server via Fetch.

  I'm not a technical expert. Can anyone help?

  Thank you

  Val

  Hi Val,

  Please follow it mentioned below as follows:

  1. exit Dw.

  2. Open regedit and navigate to the following key: HKEY_CURRENT_USER\Software\Adobe\Dreamweaver CC 2015\Site préférences

  3. find the DWord value: CURL_MULTI_FILES_LIMIT and set its value to 2.

  4. launch Dw.

  5. try FTP workflows.

  Thank you

  Confidante

• How to connect to your Remote Server when you have a test server?

  Hello world

  UH..., on my site, I have a test server and a remote server defined in my Site Set UP window, when I test the remote server by clicking on 'test' in the basic window, it says 'connected successfully', but when I open the files window to connect to my remote server and transfer files, it is said "test server" on the left column (all files are in red) and when I click the icon "to connect to the remote host" it connects right on the test server and shows all the test server to the files in the left column.

  How to connect to the remote server so I can up load files? Thanks for your help.

  See screenshot of the expanded files Panel.  The remote server icon is to the left of the icon of the test server.

  

  Nancy O.

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.

• Error 0 x 80004005 When you try to connect to a remote server

  We have a server everyone in our office who can connect remotely through wifi of office, but a member of the team keeps getting an error 0 x 80004005 When trying to access the server directly. I installed MicrosoftFixit50409, which was supposed to disable IPv6 and he was able to get on the server from the desktop again. Now he is back at the office a few days later, he once more can not access the server. Nobody else has this problem with their computers (a mix of Microsoft 7) and 8.

  When I run diagnostics on the connection error, he returned with the following text: "your computer seems to be configured correctly, but the device or resource (* our company server name *) does not."

  Any suggestions on a permanent difficulty on how I can get this computer to access the company's server without having to reinstall this Fixit program every time that he Vienna? It runs Microsoft 7 and connects to the wifi office, just not the shared server.

  Hi Leslie,.

  Because it is a connection problem, you should contact the forum TechNet, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverfiles#Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc&content=content

  I hope this helps.

• Connect to a remote server

  I used Dreamweaver for a few years. Recently, I moved to a new computer Windows 7 OS and installed Dreamweaver again. I have regularly manage and edit a Web site without lucrative, but unable to connect to the remote server of the Web page that I used to edit the page in Dreamweaver. The site is published, the files are on my local computer and the remote server, but I can't simply connect. It gives me a msg of error without too much detail. I tried to copy the game to the top in place on my old computer to my new computer, but still cannot connect. I can't tell if it's a firewall on this new computer problem or some other thing that is specific to the operating system on the new computer, or something else entirely.

  Can you connect with an FTP 3rd party like Filezilla client?

  If not, are you sure that your server remote login credentials are correct?

  Nancy O.

• Unable to connect to a remote server with remote desktop, another machine works

  Windows XP Professional Remote Desktop connection

  Hello

  I recently bought a computer with Windows XP preinstalled Mac Professional and running Office remote version 2.1.0. I can't connect to my work server that is running Microsoft Exchange Server 2003. The most frustrating is that I also have an Air of Mac Book that has remote desktop version 2.0.1 which is able to connect. I checked I think all the security and the network settings between machines and am still unable to remedy the situation. Hoping that you may be able to guide me in the right direction.

  Thank you

  Hello lovers of Lorne.
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to connect to the server with workstation. Appropriate in instances of Windows Server.

  Please post your question in the Windows Server forums.

• Doesn't connect to a remote server

  Why DW stopped connecting to the remote server?

  I changed nothing and now get "an FTP error occurred."

  Thank you very much... He was actually not DW... was that the server was down for maintenance

• Why Dreamweaver cannot connect to my remote server - I use ftp.

  I made changes to my site (I am a user of type copy / paste, without a lot of knowledge... but enough to get what I need).  I use a Mac and I have Dreamweaver CS6.   I downloaded a few pages of changes successfully.  Then, I tried to download the next page and received the message that Dreamweaver could not connect to server - with a list of possibilities of why I couldn't.  I had the help of my website host support team and they have been able to connect to my ftp server.  I was also able to connect by typing in ftp.website in Safari - however Dreamweaver does not connect.  I went through all the troubleshooting tips, which were extremely easy to follow and I have upgraded to Dreamweaver.  I can not connect.  Anyone had this problem before.  I'd appreciate some advice.

  The time I saw is that the username and/or the password is not correct. I recently had just the same problem and I didn't have my correct password. Get with your hosting provider and check (types each on independent) these two. I have big fingers.

  Jim

• Help required for a very simple HTTP connection to a remote server (not localhost)

  Hello

  FlashBuilder 4.x is very promising, but the system is very difficult to use and very simple data binding operations making becomes a daunting task. In addition, the documentation is terrible, and it seems that each example Adobe has ever published of concerns localhost and not on a remote server. What happens if we do not use localhost, Adobe?

  Please, can you show me or tell me, how to link external data - even something simple like "hello world"-in a control on the page - textarea, datagrid, etc.? I want to use the HTTP services or return some HTML/XML/JSON - or even nothing. Whenever I try to connect, I get an error saying the URL I entered contains an error and I need to check the settings etc. Here my script, which is a ColdFusion script just returns (valid) XML. I also have a crossdomain.xml in the root of the server file and the script works fine when the seizure in the browser, etc..

  Enjoyed all the examples. Really want to dumping FB4.6 in the trash at the moment, because simple things that can be coded by hand in seconds become enormous tasks in FB

  Kind regards

  Mark

  Nevermind, I finally remove FlashBuilder and installed Corona. A written my first application in an hour, FlashBuilder is a dinosaur compared to Corona. Corona which supports also a lot faster and the documentation is much better. FB is bloatware and much too bulky. If you want quick results and an API that works out of the box, I would advise you to Corona. I spent many wasted hours juggling FB and it does not only deliver.

• Redirect IOM built-in connection after the forgotten password or timeout.

  Hello

  We have OAM and IOM deployed and integrated 11.1.2.2.0, nonclustered, with a DCC webgate using standard forms authentication.  IOM and OAM do not share a physical host or a domain.

  We can successfully connecting and disconnecting the IOM through the DCC webgate.

  The standard login form has had a link added to access the features of IOM forgotten password.

  1. After successfully using the password link forgot that you are presented with a button «Back to Login»  This button goes back to IOM standard connection on the host server screen, IOM and the port.

  2 when the IOM time-out is used, it also takes us back to the standard login IOM on IOM managed server host and portscreen.

  Nobody knows what he does to make sure that we get redirected to the page of OAM connection on the host of the CDC?

  Thanks in advance.

  Darren

  Try this link http://oraclestack.blogspot.com.au/2014/01/modify-oim11gr2-session-timeout.html

• I had to change my password online gmail accnt and now I get a msg "configuration could not be verified" when I try to connect with the new password.

  I had to change my password for the gmail online account. I can access my account with the new password through my browser and my cell phone. But when I try to connect to my gmail account in Thunderbird
  by using the new password, I get a "Configuration could not be verified" error message.
  Any help would be appreciated.
  Thank you
  Brendan

  It looks like you are trying to create a new account. What are you doing exactly?

• Impossible to connect with the correct password

  I happily use my computer and connect using recognition of fingerprints by truesuite access manager, and then all of a sudden I turned on computer, and it says "Please login by password and register your fingerprints. Typing in what I know, it's the right password, he still refuses to connect.

  Anyone know how I could resolve this issue?

  Thank you

  Hello

  First of all, you need to give us more information on your laptop model and the operating system.

  And what exactly happens if you type the password? You get an error message or something else?

  Do you have that something has changed on the system before you rebooted? Have you installed any updates?