Connect to a remote server

Similar Questions

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• CS6 Dw hangs when it is connected to a remote server

  Hi all

  First of all, thanks to all those who have contributed here I found a ton of useful info on these forums.

  I am facing a problem that has been around for awhile, but I'm afraid, I was unable to find a solution. Dreamweaver (CS6) is very slow/unresponsive in work as part of a 'Site' connected to a remote server. The weird part is that this happens only on my laptop, the feature works fine on my desktop PC which has almost identical characteristics except that my laptop is 100% SSD (you would think it would be more efficient). It hangs for a few seconds when you save a file, which IMO is acceptable, I understand that it is pushing it to the server. The real problem comes when I'm switching between open files, or open a new file. Two of these actions take about 10-15 seconds, during which Dreamweaver has a crisis and I get notification (no response) in the bar of the window.

  Dreamweaver is updated, I use no archiving/retrieval functionality. In the server settings, I have «automatically download to the server after...» "and"Maintain synchronization information"checked.  Ftp services work perfectly with my remote server, Notepad ++ also works very well.

  PC card in case it is important: (laptop is almost two years but decent hardware and short grand otherwise)

  ASUS

  Windows 10

  I7

  Samsung 500GB SSD

  8 GB RAM

  NOTE: in addition, once the file is actually opened and loaded, DW works fine; no lag, no hanging. It is the Act of switching/opening files (file at the top of DW tabs) which takes forever. Economy/downloading files takes less than 5 seconds and during this time, you see the download dialog box and DW does NOT get the "(ne répond pas) ' as it does when switching/opening files."

  Any suggestions on fixing this?

  Best regards

  Alex Overton

  Dreamweaver is designed to operate on local files that you upload to the remote server when you are finished editing the. I don't have CS6 installed, but I think he allowed you to work on individual files without defining a site beforehand, and some people used it to edit files in situs, that is what it looks like you do. It is no longer possible in Dreamweaver CM³. You must define a site to be able to edit a file.

  Dreamweaver CS6 is is no longer officially supported. If it works well otherwise, I think that you'll just have to consider this shift as a reality. You access files on a network link, so there is a latency. Why it happens on one machine but not another is a mystery.

• invoke VMScript unable to connect to the remote server

  I have two PCs, two win 7 x 64. PC1 has powercli 5.5 build 3142196 (5.5u2?) and the other who has now updated 6.0.0.7857 (last AFAIK) via VMware PowerCLI - 6.0.0 - 3205540.exe from the downloads section.

  On PC1, I can run the script

  invoke vmscript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vmware * "'-ToolsWaitSecs 45 - VM VMName - guestuser guestacct - guestpassword blablabla".

  and it works very well and gives me a result.

  If I run the same command on PC1, I get the error:

  Invoke-VMScript: 16/11/2015-18:32:01 VMScript Invoke cannot connect to the remote server

  on line: 1 char: 1

  + Call VMScript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vm...»

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [invoking-VMScript], ViError)

  + FullyQualifiedErrorId: Client20_VmGuestServiceImpl_DownloadFileFromGuest_DownloadError, VMware.VimAutomation.ViCore.Cmdlets.Commands.InvokeVmScript

  Anyone encountered this before? I see no difference in the PC it would cause and I wonder if there are logs, etc. for troubleshooting, I'm not aware of. The message is a bit lacking in detail. Probably the client must connect something.

  Thank you!

  The client when you run the Invoke-VMScript cmdlet on must actually be able to connect to the physical ESXi host on which the virtual computer runs on port 443. Are two clients on the same subnet, you have a firewall between the hosts and guests? Just try to open the ESXi host welcome page in a browser from these two clients, e.g. https://myesxihost.local/

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• Unable to connect to a remote server?

  I've been connecting to my remote server when you use Dreamweaver for several years. Today, I received the following error message:

  An FTP error occurred - cannot connect to the host.

  Maximum number of users reach or not authorized to make the connection because of local firewall does not block FTP data.

  My firewall is off and I can't connect to my server via Fetch.

  I'm not a technical expert. Can anyone help?

  Thank you

  Val

  Hi Val,

  Please follow it mentioned below as follows:

  1. exit Dw.

  2. Open regedit and navigate to the following key: HKEY_CURRENT_USER\Software\Adobe\Dreamweaver CC 2015\Site préférences

  3. find the DWord value: CURL_MULTI_FILES_LIMIT and set its value to 2.

  4. launch Dw.

  5. try FTP workflows.

  Thank you

  Confidante

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• Doesn't connect to a remote server

  Why DW stopped connecting to the remote server?

  I changed nothing and now get "an FTP error occurred."

  Thank you very much... He was actually not DW... was that the server was down for maintenance

• not be able to collect some Logs Errror: unable to connect to the remote server

  I'm trying to collect Diagnostic information requested of VMWARE and I get an error message

  Error state HOME

  Complete XX.XX.XX.xx

  Complete XX.XX.XX.xx

  YY.yy.yy.yy could not connect to the remote server

  YY.yy.yy.yy could not connect to the remote server

  Bundle of newspaper has not YY.yy.yy.yy has not generated

  VCenter Server full

  VMware Vsphere Client full

  I don't know their reasoning for this, but it seems like a pain in the thigh. Why not just export logs with the vSphere Client? File-> Export-> Export System Logs

  Or

  Use the help wizard that will allow you to collect and automatically download newspapers in vSphere?

  http://www.VMware.com/products/Datacenter-Virtualization/vCenter-support-assistant/overview.html

• How to connect to your Remote Server when you have a test server?

  Hello world

  UH..., on my site, I have a test server and a remote server defined in my Site Set UP window, when I test the remote server by clicking on 'test' in the basic window, it says 'connected successfully', but when I open the files window to connect to my remote server and transfer files, it is said "test server" on the left column (all files are in red) and when I click the icon "to connect to the remote host" it connects right on the test server and shows all the test server to the files in the left column.

  How to connect to the remote server so I can up load files? Thanks for your help.

  See screenshot of the expanded files Panel.  The remote server icon is to the left of the icon of the test server.

  

  Nancy O.

• Connection to the remote server through ODBC

  I am trying to connect to my XP box to an HP - UX Server databases
  with Oracle 10g via ODBC. I have tried almost
  everything and still cannot connect to it.
  
  I have the Microsoft driver and the driver Oracle, as well as the
  Oracle Instant client installed in the XP box, with a tnsnames.ora
  file that points to the server, the variable ORACLE_HOME defined, etc.
  
  I know it's available, because I can connect to this same
  machine with JDBC Oracle Thin Client (ojdbc6.jar). This driver deesn can't
  don't even need the customer Oracle installed on the local computer. I just
  specified the IP address, port (it is a nonstandard port), SID, user, pass and it works.
  But do not support the programs I should use JDBC.
  
  Do you have any connection string that is right for you? I tried the
  those of connectionstrings.com and carlprothman.net, but I think they are
  not intended to connect to a remote server...

  Your applications are trying to create a connection without DSN to the database? Or they're trying to connect via a DSN? You try to use a TNS alias? Or include the definition of TNS in the connection string?

  You have created a DSN to connect to the Oracle database? If so, the ODBC Oracle driver provides a button "test connection". What did you use? If so, does the connection?

  How many houses Oracle you have on this machine? I assume you have at least two, or more. You have configured by an TNS_ADMIN environment variable? If this isn't the case, the tnsnames.ora file would need to be replicated in every Oracle home you want to have access.

  From the command line, can you tnsping the TNS alias you created in your tnsnames.ora file?

  Justin

• Remote access client 2.0.1 for Mac OS 10.4.11 connection to the remote server running Windows Server 2008 R2

  I have a mac with OS 10.4.11 and I try to access a remote server running Windows Server 2008 R2.  I have installed, uninstall and reinstall the Client of remote access for Mac 2.0.1 but I can not connect.  My network administrator tells me that Mac OS 10.4.11 is so old and useless that I am better just throw my computer and buy a new one in order to solve the problem.  This is absurd.  Can you help me?

  Hi Benjamin Spicer,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the Forums TechNet Remote Desktop Services (Terminal Server Services).

• Unable to connect to a remote server with remote desktop, another machine works

  Windows XP Professional Remote Desktop connection

  Hello

  I recently bought a computer with Windows XP preinstalled Mac Professional and running Office remote version 2.1.0. I can't connect to my work server that is running Microsoft Exchange Server 2003. The most frustrating is that I also have an Air of Mac Book that has remote desktop version 2.0.1 which is able to connect. I checked I think all the security and the network settings between machines and am still unable to remedy the situation. Hoping that you may be able to guide me in the right direction.

  Thank you

  Hello lovers of Lorne.
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to connect to the server with workstation. Appropriate in instances of Windows Server.

  Please post your question in the Windows Server forums.

• connect to the remote server

  Hello friend

  Pls help
  Given below to other site, ip address of the server 172.16.5.10 and public IP address 41.59.251.X, I need to create the tunnel so that my
  Server with the ip 172.17.18.41 and my public IP 41.59.251.Y must be able to communicate with the remote server which is

  172.16.5.10
  What is the way forward? my server ip address 172.17.18.41 mask 255.255.255.33

  -3des encryption
  -Md5 hash
  -Preshared authentication
  -Group 2
  Pre-shared key 66@#fgk
  -Public IP 41.59.251.X
  -ip address of the server 172.16.5.10 (he is 27 subnet)

  Is what I want to implement, help the routing between two networks and access-list for only two servers to talk to pls

  crypto ISAKMP policy 30
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  ISAKMP crypto key 66@#fgk address 41.59.251.X
  Crypto ipsec transform-set STRONG esp-3des esp-md5-hmac
  JOE 30 ipsec-isakmp crypto map
  set of peer 41.59.251.X
  86400 seconds, life of security association set
  transformation-STRONG game
  PFS group2 Set
  match address 140

  access-list allow 140
  IP route

  interface GigabitEthernet0/1
  Description CONNECTION to ISP
  IP 10.17.50.1 255.255.255.252
  IP virtual-reassembly
  automatic duplex
  automatic speed
  JOE crypto card

  Joe

  En to encrypt traffic must match the access list, and it must match the list of access on the other side.

  The easiest would be to ask the person manageing the router on the other side to send you the configuration, otherwise it's just a guess how this access list must be configured.

• Connect to the remote server without giving the SYSDBA password

  Hi, I would like to backup RMAN script running from a catalog server using the windows scheduled task backup target running on the remote computer.
  
  Is there a way I can connect to the remote machine target without giving the password in the script?
  
  Server catalog and target server are 11.2.0.3
  
  
  Srini-

  Hello;

  I'd look to this to try to resolve this problem:

  http://docs.Oracle.com/CD/B19306_01/network.102/b14266/cnctslsh.htm#i1006413

  Best regards

  mseberg