Connect to the result of local wireless only router and can not go to the internet

Similar Questions

• I have IE to Mozilla Firefox password and can not find that my internet registered the username and passwords. Help, please!

  I have IE to Mozilla Firefox password and can not find that my internet registered the username and passwords.  Help, please!

  Tools > options > Security > passwords saved...

• new router and can not connect wireless

  Installed a new router that has changed my a WEP to a WPA2 security. I connected to the printer (7410) via ethernet cable and changed the security settings, but the printer will not connect to my router. I'm printing directly connected ethernet cable on the router. When I try to use the interface of the printer to cinnect to the router the only option that appears is WEP.

  Any ideas?

  Thanks it worked perfectly for me!  Sorry, your options appear on the screen for you, but they did it for me.

  Just make sure you change your new router wireless to the first WAP and it should work fine.  No need to reinstall any software or drivers as some previous posts said.

  Go to: network, Wireless Setup Assistant, (I had to scroll down to the second page to find where to enter my new network name) and enter the new network name configured on the router.  I changed my network name of the WAP2 name that I had originally put in place, so it was easier to distinguish that one has on the WAP.  Enter your WAP password and you should be good to go.

  I use a wireless router Netgear on a Windows XP operating system.

• P1102w printer: have new router and can not figure out how to print wireless at P1102w printer - he sees old router

  I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.

  Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)

  I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.

  Here's what finally worked.

  1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.

  2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)

  3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.

  Finally, everything works and all devices are wireless printing

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• local access only: unable to connect to the internet

  Recently, my laptop has trouble to connect to my home network. It's a laptop Dell and Windows Vista. This laptop used to connect wirelessly to the network without any problem, but lately, whenever it connects, it is said that "local access" and does not allow me to use the internet. " This problem occurred at the same time I replaced my old router with a new. Another laptop and other devices can still connect to the internet with this new router with no problems, but my laptop stops the message "local access only".

  After some research, I discovered that in typing "Cmd" in the search bar after clicking the start menu, run this program as an administrator, type "netsh int ip reset" in the command prompt, then by restarting my computer would fix my problem and my laptop would work very well and connect to the network and to the internet with no problems. However, as soon as my laptop is entered 'sleep' mode or has been disabled, when it was turned on again the problem persists and I have to follow the process of using the command prompt and restart the computer every time I turned on my laptop.

  As you can imagine, this process can be quite annoying and I would like to find a more permanent solution to my problem, especially since the past several times, I tried this workaround, it failed, so my laptop is once more without internet access. If anyone has any suggestions, it would be appreciated I am completely puzzled. Thanks for any help.

  Hello

  Method 1
  I suggest you try the steps from the following link:

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

  Method 2
  In addition, you can disable IPv6 to see if that nor does not affect the wireless adapter.

  To disable IPv6:
  (a) go to start, right click on the network, and then click Properties.
  (b) network and sharing window will appear, then click on manage network connections.
  (c) network connections window will appear. Here you can right click on the network adapter that you want to disable IPv6, then click Properties.
  (d) in the local area network connection properties window, clear the Internet Protocol Version 6 (TCP/IPv6) check box, and then click OK.

  Method 3
  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

  I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

  I get local only on both connections Wi-wired and wireless, no matter what I do.
  I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
  Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

  OK, here was my fix:

  I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
  I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.

• trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

  Connection to the local only when the internet connection is desired.

  Whenever I turn on my laptop & try to connect to the internet, it just connect 'local' so I tunplug the router to the computer & the power of the wall.  Then turn router back on, reconnect to the desktop computer & then it works.  It did not start until last week.  Help, please!

  Hello

  Did you change your computer?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I would also update the NIC drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Cannot get my Presario C700 to connect to the internet only connects local

  I can't get my presario c700 to connect to the internet. get only the local connection. I tried using the website of compaq, microsoft, and atheros site. Nothing works. I downloaded a bunch of different drivers. I found several forums with links to the drivers who have helped, but when I click on them they cannot be found. Extremely frustrated. All my other devices connect completely so I know it isn't my router.

  Compaq Presario C700

  Atheros AR5007

  Hello:

  This driver should take care of this problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• No Wireless Connection and can not only change the router

  I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.

  Hi estesblake,

  (1) do you get an error message when you try to access wireless internet?

  (2) what is the number of brand and model of your router?

  Follow the steps outlined in the article below to fix the problem of wireless network connection

  Wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

  Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.

• Network Vista - "local access only" - unable to connect to the internet

  Hi all, I use my old y550 of one day, and I can't connect to the internet via my wireless router.  When I go to use the Connection Wizard internet, that I am able to connect to the router but not the internet.  Very, very annoying!  I tried all the trouble shooting tips in Vista, but none of them make any difference at all.   And oh yes, I put Vista "connect automatically" for the router, but it never - sticks I always (try to) reconnect manually.  How can happen on a new machine?

  Hi all, understood the problem - need to update the firmware on my linksys router.  Once I did, I could connect.  I still have to manually connect everytime I restart the computer, however, despite the box "connect automatically".  Any ideas?

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• The active network connection icon keeps changing on me. He began by showing only 2 connections to the internet and the changes and then later to 3.

  Hi, the active network connection icon keeps changing on me.  He began by showing only 2 connections to the internet and the changes and then later to 3. But does not show where is this extra connection to connect to the local network.  I have a laptop so no wireless and cannot understand why he continues to display an additional connection.

  original title: network access connection

  Hello

  1. what version of Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2 has there been any changes to your computer until the problem occurred?

  3. have you installed all types of network adapters on your computer?

  4. are you able to connect to the network and browse the Internet?

  I suggest you to follow the troubleshooting steps and check if the problem on your computer is resolved.

  Method:

  Check if the network adapter is displayed in the Device Manager.

  a. right click on computer or workstation.

  b. Select manage.

  c. click Device Manager on the left was next to the window.

  d. on the right side, locate the network adapters and click the arrow to expand the menu.

  If you have multiple NICs installed (watch), I suggest you uninstall the network adapters that is irrelevant to your computer by right-clicking on the adapter irrelevant and selecting Properties and then select uninstall.

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• How to connect to the internet via the wireless?

  I just bought my first laptop Toshiba L10, and I'm unable to start, how do I connect to the internet using the wireless feature and no track? More frustrating is how can I connect to the internet in the first place, wireless.
  Help, please.

  Hi Phil,

  To answer your questions in full, it would be quite a task but here is my simple guide: -.

  1. connect to the internet

  1.1 choose an ISP (provider of Internet Sertvice) and get a CD with the software and the connection information.

  1.2 load the CD and follow the onscreen instructions to set up your login information.

  1.3 If you use dial-up connect your cable modem to your laptop and the other end to your telephone line.

  1.4 If you are using broadband services to connect your CODEC to your USB port and the other cable to your microfilter attached to your telephone line.

  1.5 DO NOT START YOUR INTERNET CONNECTION UNLESS YOU HAVE ANTIVIRUS RUNNING ON YOUR LAPTOP.

  1.6 Click START-> CONNECT TO-> the connection created in 1.2 above

  For the wireless connection, the procedure is similar braodly but you need a router or wireless modem connected to your telephone line and properly configured in Notepad you.

  Follow step 1.5 with a lot of attention. If you connect to the internet without anit-virus software and firewall appropriate, it will be only a few seconds before your laptop computer will be infected with a form of virus. Please be careful.

  HTH