trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

Similar Questions

• TRYING TO CONNECT TO EBAY BUT HAVE SITE NOT RELATED QUESTION

  I am a regular user of Ebay.  However, as of this morning, I was unable to connect to my account without a request for financial information.  EBay says his watch is not on their site and is a problem of browser security.  Did someone familiar with what's going on?  Thank you.

  Hello

  Remember to stay in touch with eBay and their user forums.

  -----------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ========================================

  After carefully checking with above and as appropriate:
  
  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  ========================================

  Microsoft PCSafety provides users at home (only) with the support free of charge in the treatment of infections of malware
  like viruses, spyware (including unwanted software) and adware.
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also

  Microsoft consumer Security Support Center
  https://consumersecuritysupport.Microsoft.com/

  Diagnosis
  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&FAQ=1&task=Diagnostics&St=1&wfxredirect=1

  Microsoft online security
  http://www.Microsoft.com/protect/fraud/default.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I'm trying to connect my photosmart 2610 to a wireless network. Following the online instructions, I have

  I'm trying to connect my photosmart 26110 printer to my wireless home network. By following the online instructions, I find when I get to the network menu on the printer, I don't have a network configuration option. So now what?

  The printer is currently connects to a PC via USB. I want wirelessy this network printer for my Mac to print to it also.

  LAN means Local Area Network.  It comes to your home network.  WAN means Wide Area Network.  This is the port to connect to your service provider, or in other words, where the Verizon's Internet connection needs to connect.  It shouldn't be to hard to get the Macbock to install the printer on the network.  The document below will guide you in the process.  Let me know what happens.

  Install the software from the product under Mac OS X for a wired network connection (Ethernet)

• I only 'local only' connection, does anyone know a real solution that works?

  Hello

  My computer is a Dell XPS M1330 on Vista.
  Recently, I have noticed my wifi says identification or connected only local connection.
  Because this came I was not able to connect to any wireless network.
  I tried to connect directly via cable ethernet... still the same
  Even my 3 G Dongle says the same thing.
  The router works well because I use another computer on it, cables etc. all well tested okay with other computers.
  The computer worked fine on the router until the router is a D-Link router.
  I am pleased that the router is not the problem as all of the other computers and devices connect very well but I tried factory resetting is still no joy.
  I tried drvers off installation and reinstallation on the computer, but that networking does not work on wired, wireless or 3 g dongle I suspect something went wrong somewhere with the computer.
  Can someone please suggest a solution.
  Concerning
  Colin

  Hello

  Method 1:

  I suggest you to follow the links and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  See also:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

• After the launch of an updated Firefox tries to connect to the server to update for hours, but can't, even if I am connected to the internet. How can I update in this case?

  I get requests to update for firefox 7.01: if I try Firefox shows me a screen in which it tries to connect to the server to update (during business hours) even if I am connected to the internet: I am able to browse with firefox. I also downloaded firefox 9 but first I can't open it: "there is already a version of firefox open. Second: This version also asked me to update, but still the same problem. I'm new with mac, please help...

  Greetz

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• I can't access the system tools and trying to connect to internet it is blocked with the 404 error is returned

  Original title: help with XP

  Hello. Lost my son specifications accessories so I can not access tools etc as a result of this system by trying to connect to the internet, it is locked with the 404 error is returned. I checked and seems to be something that is called the prevention of execution of data, or something similar. I suspect that a virus may have corrupted windows. is there a site that I can connect to that will analyze or fix the erors with windows. I know a little about computers, but the easier the better solution to any who no matter what solutons to one of these problems. I tried turning of DEP, but it does not work. the indices or help gratefully received. Thank you

  Hello

  ·         What is the service pack installed?

  ·         What anti-virus program do you use?

  Method 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2:

  I suggest you run the SFC (System File Checker) and check if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3:

   

  Error 404 occurs when Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  I suggest that you reset the internet settings explore by default and check if it helps.

  For more information, see the article.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

   

  Method 4:

  I suggest you create another user on the computer and verify the results: how to create and configure user accounts in Windows XP: http://support.microsoft.com/kb/279783

  If the problem does not occur in the new user, and then follow the steps from the link below: how to copy data from a corrupted to a new profile in Windows XP user profile: http://support.microsoft.com/kb/811151

• I can't connect to the internet, get a message when trying to connect it says windows cannot access the specified device

  I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop

  Hi MelissaBoltik,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to reset the TCP/IP settings.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Trying to connect my laptop to the internet and I get the message "validation of identity and then it is not connect."

  I'm trying to connect my internet to my laptop but its does not work (it is a new connection). I tried it on my other laptop and password have crossed (the computer on which he worked on had vista). In addition, he worked with other computers in the House. I get a message of identity validation and then it is not connect?

  original title: internet connection failure

  Hello

  Do you mean that you try to connect the wireless access point? Try to install Service pack 3. Also what you can check:
  Click Start-> settings-> network-> right click on your adapter connection-> properties-wireless => select Wireless (tab)-> select your (name) wireless access point->, then select properties-> click on authentication-> uncheck the "802.1 x authentication for this network" click ok on all screens.

  Restart your computer and try to reconnect.

  I hope this helps.

• I just got back my computer to its factory settings... and now I amd trying to connect to the internet

  I just got back my computer to its factory settings... and now I amd trying to connect to the internet but it is windows xp and im lost I tried the installation wizard and I still don't know any help would be great

  Hello

  1. how to access internet through hard wired or wireless?

   
  I suggest you to follow the steps below and check if it helps.
   
   
  Method 1:  You can follow the steps mentioned in the link below to make an Internet connection
   
  To establish an Internet connection
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true
   
   
  Also check out the article below: How to configure Internet access in Windows XP Professional.
  http://support.Microsoft.com/kb/305549
   
   
  More information: You can see the steps outlined in the article below.
  How to troubleshoot possible causes of Internet connection problems in Windows XP.
  http://support.Microsoft.com/kb/314095
   
   
  Hope this information is useful.

• Trying to connect to the internet after the failure of hardrive.

  I am trying to connect to the internet after that I wiped recently my hardrive due to the blue screen of death, I use a card of d-link airplus dwl-520 if I need to install some programs that I consider ive got no program on my ill try machine any option avalible please help! If you need more information just ask.

  asz1977,

  As I sad to PCN00B159 go to your computers to build and download the driver to your computer and see if the difficulty of the question.
  Please rate me upward if you find my post helpful. Thank you!

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Trying to connect Xbox 360 to Internet using laptop with Windows 7, but am not finding the 'Share' button in the network connections and I don't have the ability to "bridge connections".

  Sorry about the long title, but it pretty much says my problem. I am trying to connect my Xbox 360 to my Windows7 laptop with the ethernet cable. I have a home network that the wireless laptop works out of. When I go into the control panel network connections section, I can't find the 'Sharing' tab that says that every tutorial I can find there should be. Tutorials can say to go to the screen that shows your wireless connections, highlight your home network and the network to your Xbox and then right click and press "bridge connections". I do not have the option for bridge connections. Can anyone help?

  After having connected the laptop and Xbox with an Ethernet cable, you should be able to enable sharing of Internet connection on the wireless network connection:

  1. Make sure that the two network connections are enabled.
  2. Right click on the wireless network connection.
  3. Click on Properties .
  4. Click sharing .
  5. Put a check mark in the check box under Internet connection sharing .
  6. Click OK .

  After you enable ICS, not bridging the connections. Boulder computer Maven
  Most Microsoft Valuable Professional

• Error 651 trying to connect to the internet

  I am running Win7 Home Premium and and I get a 651 error trying to connect to the internet. I replaced the file rasppoe.sys with an another working Win7 pc, but this did not help. I also tried the same file from a Vista laptop but still no joy of work.

  I also disabled the connection of ivp6 nothing helps

  I use Virgin Media as my ISP access and you connect using a network modem.

  Any help would be appreciated I'm going crazy trying to fix it.

  Thanks in advance

  Is it only started recently? You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the McAfee removal of Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat