Connect two PCs using Windows 7 with a crossover cable

Similar Questions

• Problems with Easy Transfer - trying to connect two computers using a USB link adapter

  I am trying to connect two computers using a USB link adapter, a computer running Windows XP under Vista, I installed the "Easy Transfer" software provided with the adapter link on the computer running XP without problem. I am able to transfer files from the computer to Vista operating, but cannot transfer the XP machine - select 'Advanced Options' to check what files can be transferred I receive the error "an error of analysis of the data on your system, windows Easy Transfer will be closed. Any ideas what I can do, any help would be greatly appreciated.

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Above is the recommended way to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• Using Windows XP with an access switched. How can I stop the network Dialer to invite the user connect even if I checked never dial a connection in Control Panel, then apply, then OK?

  Using Windows XP with an access switched. How can I prevent the network Dialer to invite the user connect even if I checked: never establish a connection to the Control Panel, then apply, then OK? She comes right back in a few minutes for: always connect by default. Help! Control panel Connections tab doesn't really seem to apply my change to never establish a connection right back to always make the default connection. What else is there to do?

  Hi Richard,

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Network connections and remote access troubleshooting

  Hope the helps of information.

• How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

  How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

  All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

  Canon: http://www.usa.canon.com/cusa/consumer

  Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

  J W Stuart: http://www.pagestart.com

• Connect two VSphere ESXi 5.0 with crossover cable

  Hi all! A newbie in the ESXi 5.0

  I configured both servers of VSphere ESXi 5.0 with two network adapters on each server, the first NETWORK card acts as a virtual Internet switch, and the other NETWORK adapter serves only the link of communication (Heartbeat) between two VSphere Esxi 5.0 using crossover cable.

  My question is, how can I create such change in VSphere in a problem of communication between these 2 servers with a crossover cable? I would like to connect my (CentOS 6) VMs on each server via this network adapter with cable modem Simulator for the purposes of the communication of pulsation. I know how to create a normal vSwitch who can communicate with the Internet, but I have no idea how to create a switch for the NICs connected with a crossover cable.

  Please drop me a line if you know how.

  P.S. The idea to use the crossover cable rather than use the simple ethernet cable is the cable eliminates the overhead and to avoid the lack of packages due to the processing time of the switch.

  I know not how to create one with ordinary vSwitch to establish a connection with the Internet, but not this vSwitch with crossover cable.

  There is no difference. Build a vSwitch as your normally would, including the NETWORK card that is connected via a crossover as your uplink cable.

• I deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message "Adobe Reader is blocked because it is outdated". Using Windows XP with the latest updates (SP3).

  
  

  I deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message "Adobe Reader is blocked because it is outdated". Using Windows XP with the latest updates (SP3).

  Screenshots attached to e-mail responses will not come back on the forum. You must connect to the forum and post in your topic using the camera icon in the editor.

  Google Chrome is a problem:

  • If you use the clean Chrome PDF Viewer, the results are unpredictable.
  • If you use the Adobe Reader with Chrome plugin, it can reject (block) If this isn't the latest version.  11.0.08 drive is the latest version for Windows XP, but Chrome can insist on the current version 11.0.10.

  My suggestion; Use a different browser!

• Can I use the iTunes on PCs using Windows 10 app or not? !

  Can I use the iTunes on PCs using Windows 10 app or not? !

  You can run the application iTunes, but not those obtained from the iTunes App Store.

  (144221)

• Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  No. Windows cannot be installed on an external drive, or start from a.

• How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

  How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

  When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
  someone has a better solution that take care of this problem.

  Hello

  Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

  http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

  Hope the above information is helpful.

• How to use windows update with browser firefox4

  How to use windows update with browser firefox4

  You MUST use Internet Explorer to access http://windowsupdate.microsoft.com.

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Is it possible to use Windows Mail with Windows 7?

  Windows mail in windows 7

  I just converted to Win 7 and found that Windows Mail has disappeared.  I don't want to use Windows live, I'm not interested in conversing with the world, I want to just send emails.  Outlook Express is gone and I started using Outlook.  I don't really like it as it has too many things that I don't want.
  Is it possible to use Windows Mail with Windows 7?
  FWIW, Windows Mail can be made to run on Windows 7:

  Solved activation Windows Mail in Windows 7 - Vista Forums

  ' 1. download Windows Mail from Vista for use in Windows 7 "my digital life

  2.

  It seems that Windows calendar can be as well:

  Resolved, I'm looking for wincal. exe to my win 7 - Vista Forums

  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com - KVOA television, Tucson, AZ.

  Live Hot Licks - www.badnewsbluesband.com

  • Published byHal Hostetler - Print-Imaging

• I can't connect my pc to my tv with a vga cable - please advise.

  I can't connect my pc to my tv with a vga cable - please advise.

  Hi SuzieKK,

  Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo.

  You can see the following article for more information on connecting your computer to a TV:

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Let us know if that helps.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Error code: 800ccc0d, the server is not found, when I try to connect to servers using Windows Live Mail 2011 news

  Original title: 800ccc0d ERROR FIX

  Hi people, I am getting an error ("the server is not found") when trying to connect to my news server. Œuvres mail (hotmail) ok, but I can't connect to one of my two news servers I use (teranews and broadstripe). I've included the error code I have in the title above. I use Windows Live Mail 2011.

  Anyone has any ideas for patches?

  Hi kb3jlc,

  If this problem occurs only with Windows Live mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.