Connect two VMs via the connection to the local network using VMWare Player

So this topic can be posted already, but I'm at the end of the roll, trying to find a solution. I have VMWare player installed 3.1.4 on an enterprise_x64 of Windows 7 system. I configured two virtual machines: OS1 comments: Red Hat Enterprise Linux Server 5.5_x64 and OS2 comments: WIndows 7 Ultimate_x64. I need the Linux server to act as a database server in the system environment, that I am creating. The Windows 7 VM will be the client PC. The Linux server is configured to be it's own DHCP server, so ideally the client PC connects to the field of tht and also follow the Linux server IP address.

I tried all the options of networkign for each virtual computer, but no sem to create this type of connectivity. How to configure the network settings in VMWare Player to make two virtual computers can communicate with each other via a virtual network? (Communication with the host pc is not necessary)

The short answer is to manually install the lack vmnetcfg.exe, Editor of virtual networkand configure VMnet2 without DHCP and host vNIC and then configure manually each virtual machine network adapter to use Custom VMnet2.

The longer answer has already been given so many times that you should be able to find detailed directions, however...

To install the lack vmnetcfg.exe, virtual network editor, run VMware-player-* .exe-e c:\vmptmp go to a command line and then in the c:\vmptmp folder, locate the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually ' C:\Program Files\VMware/VMware Player ' you can create a shortcut to it and place it with the shortcut of VMware Player if you want to access more easily to her.  This utility is not installed by default is however necessary to turn off the automatic bypass on VMnet0 if the system is multihomed and two or more physical host from the NETWORK adapter is active or you want change VMnet1 and VMnet8 subnet addresses or additional VMnets.

The you must manually change the configuration of each virtual machine's .vmx file in Notepad, change an existing parameter and add another.

Change:

ethernet0.connectionType = "nat"

TO:

ethernet0.connectionType = "custom"

Add:

ethernet0.vnet = "VMnet2"

Note: Regardless of connectionType ethernet (n) shows it should be changed to "custom".

Be sure also to Machine virtual are stop, not suspended and VMware Player is closed when you edit the .vmx config files.

Here are some pictures to show.

Here in the VMnet2 virtual network Editor is selected and is how it should be if you what to use your own DHCP server and the host does not have a vNIC.  You can change the IP address as a result of your needs.

Here's the value VM card network NAT settings.

This is what network settings Virtual Machine map will look like after you change the configuration of the Virtual Machine's .vmx file to use Custom VMnet2.

BTW if you replace the Machine network card virtual settings through the user interface customized by something else then you will need to manually edit the .vmx config file to retrieve.   With VMware Workstation, you do not need to manually install the virtual network editor and should not manually edit the .vmx config file as the custom list box is still present and shows all VMnets to select from.

Tags: VMware

Similar Questions

  • cannot connect to the local network using windows 7

    Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

    Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

    Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel connection to the Local network adapter * 9:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. :

    State media: media disconnected

    The connection-specific DNS suffix. :

    TEREDO TUNNELING Pseudo-Interface tunnel adapter:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. our field: *

    State media: media disconnected

    The connection-specific DNS suffix. :

    I tried to turn off the firewall and connect without success

    My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

    Any help would be appreciated

    Thank you

    Well Yes! So it was an older version of the bonjour service... thank you Adobe.

    You can find the latest version here:

    http://support.Apple.com/kb/DL999

  • Computer cannot connect to the printer via the local network

    I have two computers sharing a printer, the printer is connected with USB is Vista Home Premium 32-bit. The other which must be connected wireless is old computer Windows 7 Home Premium.My, I suppose his ultimate, I'm not sure tho, that works fine with the printer. This Home Premium one just can not connect to the printer. It keeps saying can't find a print reader, I downloaded a universal driver HP that I learned other positions, and he said that it was not a correct driver.

    I asked our technical support to help me. And he told me that Home Premium has this problem. The only way I can solve this is to update my system at least pro. I checked online but I have not seen someone talked about this. Just make sure that is it true? If not, what can do now?
    Thank you very much.

    Hello

    -What is the brand and model of the printer?

    This isn't a problem with different versions of Windows support network printer.

    I suggest you go through the following links and check if it helps.

    Network printer problems

    http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems

    Note: The steps are also applicable to Windows 7.

    Install a printer on a home network

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

    Let us know the result once you have tried the steps mentioned in the link.

  • Satellite L500 - no possibility to connect to the local network

    Hello

    I'm new to these forums so please accept my apologies if I don't use the terminology correct tech.

    I have a Toshiba L500 laptop satellite. It of ok, but had to make the hard drive replaced recently (under warranty) as she died. I had been using a wireless network before I had to have the drive replaced and now trying to connect to a local network using a cable, but there is no device?

    Now, I don't know when this became a question - before or after replacing the hard drive. Not only has he failed to drive hard, but has so the speakers, so I wonder if the LAN device is just another thing that has failed.

    I understand that there are two components to the unit - the hardware and software. I learned that the material may have failed.

    Does anyone know how to get back the unit so that I can plug my computer on a local network and internet access? No, the device isn't in the network adapters. I don't know how to get it back.

    > I have the replaced disk and now I'm trying to connect to a local network using a cable, but there is no device?
    Have you tried reinstalling the driver LAN?

    Remember that the network driver is installed correctly you should check this in the device-> network cards Manager.
    In this category the LAN card and wireless network card required!

    If you're going to see some yellow exclamation points, so this means that a driver is missing or is not working properly and this means that you must remove/uninstall the driver, and after new restarts, the driver needs to be installed once more

    Please check this!

  • I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

    I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

    Hello

    You can try a system restore...

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    .. .choose time, until this problem (you may tick to show more older restore points).

    Tricky

  • Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

    a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

    Hi Abhay,

    I suggest disable you the password protected sharing and check if it helps.

    Networking of computers running different versions of Windows

    Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

  • (Connection to the local network) is not a valid IP configuration when you try to share internet via ethernet

    I shared my wireless network connection to my laptop with my Tower and I tried to change some things static ip and now my turn gets no internet at all. Here is my ip config for my laptop

    Windows IP configuration
    Name of the host...: Piro-PC
    Primary Dns suffix...:
    Type of node...: peer-to-peer
    Active... IP routing: No.
    Active... proxy WINS: No.
    Wireless network connection Wireless LAN adapter:
    The connection-specific DNS suffix. :
    ... Description: Atheros AR5008X Wireless Network adapt
    Physical address.... : 00-1F-3A-8E-D9-DC
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::a11b:747:8de1:c32a % 11 (Preferred)
    IPv4 address: 192.168.1.113 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Saturday, November 10, 2012 18:52:10
    End of the lease...: Sunday, November 11, 2012 19:14:35
    ... Default gateway. : 192.168.1.1.
    DHCP server...: 192.168.1.1.
    DHCPv6 IOOKING...: 218111802
    DHCPv6 DUID customer...: 00-01-00-01-13-C9-24-20-00-17-42-BC-C1-D3
    DNS servers...: 75.75.75.75
    75.75.76.76
    NetBIOS over TCP/IP...: enabled
    Ethernet connection to the Local network card:
    The connection-specific DNS suffix. :
    ... Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
    Physical address.... : 00-17-42-BC-C1-D3
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::283a:df5d:cf7a:d0ae % 10 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.208.174 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DHCPv6 IOOKING...: 234886978
    DHCPv6 DUID customer...: 00-01-00-01-13-C9-24-20-00-17-42-BC-C1-D3
    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: enabled
    Tunnel adapter isatap. {B2EC9B12-C460-46DE-A9CC-9B8551AF0AF3}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter isatap. {E818BF11-C224-432F-B7C0-3F2949FAADF8}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #3
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Local Area Connection * 16:
    The connection-specific DNS suffix. :
    Description...
    . : Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address: 2001:0:9d38:953c:1893:f6:e7eb:e988 (Preferred)
    Address IPv6 local link...: fe80::1893:f6:e7eb:e988% 23 (Preferred)
    ... Default gateway. : ::
    NetBIOS over TCP/IP...: disabled

    Ethernet has no default gateway so he does not know where to look for information.  Its IP address indicates he can't get an IP address to the router, or the external DHCP/DNS servers.

    Go to network & share > change adapter settings > Ethernet > properties >... Enter the IP Address of the gateway by default even in wifi.

  • A cable is not plugged into the network adapter 'connection to the Local network.

    Hi, I am using a Dell Inspiron E1505... OS: Vista... 32 bit... IE 9... I still use dial-up "Conexant HDA D110 MDC V.92 Modem" connection connected to the internet without any problem... the problem is when I asked someone to download a program "MS Office Home Student & 2010"(acheté le logiciel àle staples)... the person downloading the program via an Ethernet connection on my laptop... "." I never use the Ethernet connection to connect to the internet... Open to the top of my "Network connections" window and noticed my 'connection to the local network' has a red X and says "network cable unplugged"....." "" Broadcom 440 x 10/100 integrated controller. My toolbar in the bottom right of the screen displays an icon of two monitors with a red x as... I have made several attempts to fix using the "Microsoft fix - it Center... didn't help me..." also "diagnose and repair" on my laptop... no positive results... In the window "Network & sharing" "also shows a red X... Please advise... Best regards, John

    Hello

    Reading between the lines a bit here, it is my understanding...

    1. Never use Ethernet, probably because you don't have broadband for some reason any?
    2. Due to the size of the download, you asked someone else to do it with no broadband?
    3. As a result, which is two screens with a red X icon, but never used to be there?

    This icon with the red X is only informative. If you do not use Ethernet then you won't have connected cable, which means that the information you see on "network cable is unplugged" is correct. If you don't like this icon, you can hide...

    • Right-click on an empty part of the taskbar, and then click Properties
    • Click the Notification area
    • You will see a check box for the network, there uncheck and then click OK to hide the icon
    • Reverse this process, if you want to display the icon

    Or is your problem you can connect is no longer with dial upward? If this is the case...

    • Click Start, type inetcpl.cpl and press enter
    • Click the Connections tab
    • 'Never make a connection' values? If this is the case, always select "default connection" (or "Number using whenever a network connection is not present")
    • Click OK

    Tricky

  • No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

    I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

    Deactivation and reactivation of these two connections: FAIL.

    "Diagnose and repair" on the two connections: FAIL.

    Under dynamic I.P. type to static/static to the dynamic: FAIL.

    Uninstalled all network via Device Manager devices, then restart: FAIL.

    Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

    The command ipconfig/all text follows:

    ----------------------------------------------
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.

    C:\Users\Brooklyn's>ipconfig/all

    Windows IP configuration

    Name of the host...: Brooklyns-PC
    Primary Dns suffix...:
    Node... type: broadcast
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Intel (r) Wireless WiFi Link 4965AGN
    Physical address.... : 00-21-5C-31-87-95
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :
    Description...: Realtek RTL8102E Family PCI - E Fast Ethern
    and NIC (NDIS 6.0)
    Physical address.... : 00-1E-33-4E-2E-F7
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Card tunnel Local Area Connection * 6:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
    B4B}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
    0FA}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Brooklyn's >
    --------------------------------------------------

    Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

    I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

  • Re: Satellite Pro A40 - connection to the local network

    Hello

    My names Andy and not bieng a total beginner computer, I tried to install all the drivers for my laptop model a SPA40 old fathers PSA45E-001VM-EN. (European model I think) everything looks ok, except that I can't get the ETHERNET driver.

    When I go into the Device Manager there is NO controller network displayed in the list and there is a yellow exclamation mark against two controllers ethernet ib the OTHER DEVICES tab looking here, I downloaded the atheros wlan xp file - 7704062.zip, broadcom wlan xp - installed 5604835.ziplan20070912134727.zip and nothing changes, we used to be able to go on the net and with the wifi card in the pci slot wireless go so I know its capable I think it's just the order of drivers and the drivers themselves,

    Then someone can point me in the right direction before as I have send myself crazy with this...

    You can

    regards and thanks in advance

    Andy

    Hey,.

    The drivers that you downloaded are WLAN Card and has nothing to do with the connection to the local network (Ethernet) normal

    I think you should check the Web from Toshiba site to download the latest LAN driver. You can find the drivers for Satellite Pro A40 in * archives *.
    ttp://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp h

  • HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

    HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

    Work tried fixing it but all attempts fail.

    Firewall disabled.

    Printer recognizes the router's LAN.

    Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

    Printer does not print.

    How can I fix?

    Hi @AnnisMonadjem,

    Welcome to the Forums of HP Support!

    I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    When you say 'LAN', are you referring to the network or you try to share the printer on the network?

    How is the printer connected? (Ethernet/WiFi)

    If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    HP has several Officejet Pro 8600 series.

    What is the name and the product number of your printer? How can I find my model number or product number?

    • Update the firmware of the printer.
    • Don't hide the SSID (network name).
    • What type of encryption are you helping? HP recommends WPA and WPA2.
    • You have a double router broadband? Make sure that the two groups were not the same network name.

    If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

    To assign the static IP address, use the following steps as a guide.

    • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
    • Type the IP address in the browser to bring up the SAP.
    • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
    • Select Manual IP.
    • Enter your IP address manual (192.168.0.232)
    • Enter 255.255.255.0 for the subnet mask, except if it is different.
    • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
    • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
    • Click on apply.
    • Restart the router, the printer and the computer.
    • Test printing and scanning.

    If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

    • Try printing and scanning.

    In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

    Continue on, if the problem persists.

    Important!   Delete the temporary files and folders by using the disk cleanup utility

    1. Open the disk cleanup utility:

  • Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

    I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

    However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
    How can I create a network bridge and get the wireless internet to connect please?

    Any help to fix this would be appreciated,
    P

    This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

    If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
    Most Microsoft Valuable Professional

  • ASA 5505 IPSEC VPN connected but cannot access the local network

    ASA: 8.2.5

    ASDM: 6.4.5

    LAN: 10.1.0.0/22

    Pool VPN: 172.16.10.0/24

    Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

    I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

    Here is my setup, wrong set up anything?

    ASA Version 8.2 (5)

    !

    hostname asatest

    domain XXX.com

    activate 8Fw1QFqthX2n4uD3 encrypted password

    g9NiG6oUPjkYrHNt encrypted passwd

    names of

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 10.1.1.253 255.255.252.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    address IP XXX.XXX.XXX.XXX 255.255.255.240

    !

    passive FTP mode

    clock timezone PST - 8

    clock summer-time recurring PDT

    DNS server-group DefaultDNS

    domain vff.com

    vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

    access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

    pager lines 24

    Enable logging

    timestamp of the record

    logging trap warnings

    asdm of logging of information

    logging - the id of the device hostname

    host of logging inside the 10.1.1.230

    Within 1500 MTU

    Outside 1500 MTU

    IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    AAA-server protocol nt AD

    AAA-server host 10.1.1.108 AD (inside)

    NT-auth-domain controller 10.1.1.108

    Enable http server

    http 10.1.0.0 255.255.252.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH 10.1.0.0 255.255.252.0 inside

    SSH timeout 20

    Console timeout 0

    dhcpd outside auto_config

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    internal group vpntest strategy

    Group vpntest policy attributes

    value of 10.1.1.108 WINS server

    Server DNS 10.1.1.108 value

    Protocol-tunnel-VPN IPSec l2tp ipsec

    disable the password-storage

    disable the IP-comp

    Re-xauth disable

    disable the PFS

    IPSec-udp disable

    IPSec-udp-port 10000

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list vpntest_splitTunnelAcl

    value by default-domain XXX.com

    disable the split-tunnel-all dns

    Dungeon-client-config backup servers

    the address value vpnpool pools

    admin WeiepwREwT66BhE9 encrypted privilege 15 password username

    username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

    the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

    tunnel-group vpntest type remote access

    tunnel-group vpntest General attributes

    address vpnpool pool

    authentication-server-group AD

    authentication-server-group (inside) AD

    Group Policy - by default-vpntest

    band-Kingdom

    vpntest group tunnel ipsec-attributes

    pre-shared-key BEKey123456

    NOCHECK Peer-id-validate

    !

    !

    privilege level 3 mode exec cmd command perfmon

    privilege level 3 mode exec cmd ping command

    mode privileged exec command cmd level 3

    logging of the privilege level 3 mode exec cmd commands

    privilege level 3 exec command failover mode cmd

    privilege level 3 mode exec command packet cmd - draw

    privilege show import at the level 5 exec mode command

    privilege level 5 see fashion exec running-config command

    order of privilege show level 3 exec mode reload

    privilege level 3 exec mode control fashion show

    privilege see the level 3 exec firewall command mode

    privilege see the level 3 exec mode command ASP.

    processor mode privileged exec command to see the level 3

    privilege command shell see the level 3 exec mode

    privilege show level 3 exec command clock mode

    privilege exec mode level 3 dns-hosts command show

    privilege see the level 3 exec command access-list mode

    logging of orders privilege see the level 3 exec mode

    privilege, level 3 see the exec command mode vlan

    privilege show level 3 exec command ip mode

    privilege, level 3 see fashion exec command ipv6

    privilege, level 3 see the exec command failover mode

    privilege, level 3 see fashion exec command asdm

    exec mode privilege see the level 3 command arp

    command routing privilege see the level 3 exec mode

    privilege, level 3 see fashion exec command ospf

    privilege, level 3 see the exec command in aaa-server mode

    AAA mode privileged exec command to see the level 3

    privilege, level 3 see fashion exec command eigrp

    privilege see the level 3 exec mode command crypto

    privilege, level 3 see fashion exec command vpn-sessiondb

    privilege level 3 exec mode command ssh show

    privilege, level 3 see fashion exec command dhcpd

    privilege, level 3 see the vpnclient command exec mode

    privilege, level 3 see fashion exec command vpn

    privilege level see the 3 blocks from exec mode command

    privilege, level 3 see fashion exec command wccp

    privilege see the level 3 exec command mode dynamic filters

    privilege, level 3 see the exec command in webvpn mode

    privilege control module see the level 3 exec mode

    privilege, level 3 see fashion exec command uauth

    privilege see the level 3 exec command compression mode

    level 3 for the show privilege mode configure the command interface

    level 3 for the show privilege mode set clock command

    level 3 for the show privilege mode configure the access-list command

    level 3 for the show privilege mode set up the registration of the order

    level 3 for the show privilege mode configure ip command

    level 3 for the show privilege mode configure command failover

    level 5 mode see the privilege set up command asdm

    level 3 for the show privilege mode configure arp command

    level 3 for the show privilege mode configure the command routing

    level 3 for the show privilege mode configure aaa-order server

    level mode 3 privilege see the command configure aaa

    level 3 for the show privilege mode configure command crypto

    level 3 for the show privilege mode configure ssh command

    level 3 for the show privilege mode configure command dhcpd

    level 5 mode see the privilege set privilege to command

    privilege level clear 3 mode exec command dns host

    logging of the privilege clear level 3 exec mode commands

    clear level 3 arp command mode privileged exec

    AAA-server of privilege clear level 3 exec mode command

    privilege clear level 3 exec mode command crypto

    privilege clear level 3 exec command mode dynamic filters

    level 3 for the privilege cmd mode configure command failover

    clear level 3 privilege mode set the logging of command

    privilege mode clear level 3 Configure arp command

    clear level 3 privilege mode configure command crypto

    clear level 3 privilege mode configure aaa-order server

    context of prompt hostname

    no remote anonymous reporting call

    Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

    : end

    Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

    The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

    On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

  • Qosmio F60 - 11F - driver to connect to the local network

    Hi everyone help pleae this.

    I have a Qosmio F60 - 11F model and I have install Server 2008 Enterprise and I am facing a problem with the driver to connect to the local network.

    Please help on this issue.

    Hello

    Go to Device Manager and identify the provider/device id:

    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

    Then, perform a search on the page of the driver provider.

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

Maybe you are looking for