TouchSmart 320

Similar Questions

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• How to open my HP Touchsmart 320-1050 to check the fan

  My Touchsmart 320-1050 is 18 months old and there is two weeks the fan started to have really strong.  Looks like the engine of a plane is racing upwards for takeoff. How can I open the back to see if the fan is dusty or has to be replaced.  We live in a rural area and dirt with a lot of dust.

  Thank you

  Shirley

  Hi Shirley09,

  Really sorry. You can go there.

  http://support.HP.com/us-en/document/c01657439

  I would like to know how this happens.

  Thank you

• TouchSmart 320-1030: Touchsmart 320: Wi - Fi card white?

  Ralink stock on my Touchsmart 320-1030 all-in-One wifi card constantly abandons the wireless connection, and I would like to replace it with another card.

  Does anyone know if BIOS 320 uses "white list", in which case you can only install certain wi - fi cards? I know that HP laptops are notoious for this, but I'm not sure of their all-in-one.

  You should be able to replace the card wireless without any problem.  Before you do that, though, here's a guide that can help you solve your problem.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Touchsmart 320-1030 touchscreen does not work after update

  Hello, I bought a hp touchsmart 320-1030 pre loaded with windows 8 and once I took the free update Windows 8.1 my audio driver and pilot of the touchscreen went. I managed to get a driver of his work, but I can't understand this touch screen problem. In my view, there is no windows 8.1 drivers but I can't find a driver for windws 8 either. What should I do?

  I resolved, uninstalled my current driver then rebooted and it works now all of a sudden! Thanks for the reply anyway

• Using a second monitor with PC HP TouchSmart 320

  I just bought a PC HP TouchSmart 320.  I work from home and need to use 2 monitors.  I have a Vizio HD TV and I was wondering if I could use it as my second monitor

  Almost any goods store, office or electronics general such as Amazon, Wal-Mart, CompUSA, TigerDirect/Nutrigest or Newegg.com should have one or two products EVGA USB-to-video.

• HP touchsmart 320 does not illuminate

  My HP TouchSmart Pc 320 lights I noticed the power adapter blinks and a beep so I tried another adapter even and it does the same thing, I guess this isn't the adapter but the Pc its self.

  I have 8 TouchSmart 320 Pc that I bought for my business a year ago, it comes to the second Pc that gave me I've corrected the issues first, but what can be wrong with it? IM assuming it has to do with the motherboard. Please help thanks.

  Newera562

  Thanks for the quick response. So, the Web siteof your product has not all alerts published about problems with the motherboard.  It's a good thing.  The system has a "Angelino2" motherboard.  I don't know if it's still under warranty, but you can check the status here. I think that in this case, you should contact an HP maintenance officer and plan a repair workshop to control the installation. At this point I don't know what could be the failure.  If it is out of warranty, you could pursue other options as an output of repair under warranty with an authorized service provider. Often, they will be able to provide some diagnostic efforts at a reduced price.  Good luck to you.

• TouchSmart 320: Reset Office all-in-one

  Hello community,
  I have a all-in-one desktop Touchmart 320 HP which runs under the operating system Windows 7 Premium and infected because the office is mainly used by my nieces and nephews. It cannot connect to the Internet, nor can I use other programs. There are several ads of pop-ups that keep appearing on the screen, mainly on cleaning grafts. I would like to clean the computer and perform a hard reset. However, I am not able to go in safe mode, because when I start the computer I have not access to the keyboard that usually appears on the screen (again, this is an all-in-one computer). How will I be able to restart the computer and press the keys that allow me to tom change the mode (I have not for the moment external keyboard)? I would also like to know if it is possible to install a different version of the Windows operating system (e.g. Vista 32-bit, or another version of 7 but 32-bit) and it will work, what the consequences will be. Thank you so much in advance.

  You are welcome.  Thank you for the additional information.  It was exactly what I need.

  Here is a link to the 'how to' section for the computer:

  http://support.HP.com/us-en/product/HP-TouchSmart-320-1100-desktop-PC-series/5186986/model/5222153/how-to?cc=us&lang=en

  There is information about how to restore your system.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP touchsmart 320-1101la magic canvas disappeared

  Hello! I hope you do well

  two questions!

  My 320-1101la came up with installed W7, I decided tp upgrade at W8 because he has a huge touch screen that works perfectly . But now on W8 I can't see a magical canvas anymore, how can I return it?

  Secondly, I can't find no bluetooh on this PC, I went to HP and SW support drivers, but I did not see a pilot of bluetooh for this model.

  I appreciate your help

  Eddy_M

  Here are the specifications of your computer HP TouchSmart 320-1101la. According to the specifications, this model doesn't support Bluetooth in native mode. For this computer to communicate with Bluetooth devices, you can buy a Bluetooth USB/adapter dongle.

  It is the position of HP on the support of Windows 8 and of any computer HP have not supplied with Windows 8.

  Not all the features of Windows 8 may be available on all PCs.

  Your specific experience with Windows 8 will be determined by the capabilities of your PC.

  HP provides upgrade instructions and the drivers will be available for the majority of Windows 7 systems sold after October 1, 2011.

  If you want to restore the original operating system after the upgrade, you must create HP recovery before you put on level support.

  Please note that if you purchased your system before October 1, 2011, HP has not tested these PCs or developed the drivers for them or upgrade of Windows 8 instructions. The upgrade of these systems can be difficult, if not impossible.

   

  and

  Important information about other limitations and requirements;

  Screen resolution requirements

  Limitations with DVD playback software

  Limitations with Blu - ray playback software

  Limitations with TV Tuner software

  Secure boot & other dependent features of UEFI

  Limitations with touchscreen capabilities;

  Windows 7 (and Windows Vista) PCs with touchscreens will not have full Windows 8 touch features after upgrade.
  HP computers with hardware key designed for Windows 7 (or Windows Vista) will provide a similar experience for applications point to touch only two after the upgrade to Windows 8. Computers Windows HP with touch input material will not load Windows 8 applications that require more than two simultaneous touch points. In addition, Windows 8 shots of edge may be unavailable due to the bezel embedded on HP touch systems shipped with Windows 7 (and Windows Vista).
  HP TouchSmart and HP TouchSmart Magic Canvas applications are not compatible with Windows 8 and must be uninstalled before the upgrade. Note that the content created using applications such as Graphitti TouchSmart will be unavailable after the upgrade.

  Please click the White Star of KUDOS to show your appreciation

• HP Touchsmart 320-1030 does not turn on

  Product: HP Touchsmart 320-1030

  Product #: QP788AA #ABA

  OS: Windows 7-64 bit

  Bought the: 07/11/2011

  Problem occurred: 21/06/2013

  My HP Touchsmart has worked almost flawlessly for a year and a half, until today when I tried it alarm off mode 'sleep'. Once I tried to move my mouse to turn it on, I heard a noise of high tone from the battery under my desk. At this point, I realized that the computer was not turn on and the battery LED blinking, as if to tell me that there is some sort of error. Well my sister has the same exact model I computer and I tried with his battery and it worked, but when I tried battery and power cord with mine it did not work.

  I know that there must be an internal problem now. I tried held in the power button for 5 sec, 30 sec, and even 2 minutes before plug it and try to turn it on, but in any case, it failed. I removed the rear case and removed the small battery inside and then reinserted it but not good, and finally I tried to delete the hard drive insert it again, but not luck. It's very upsetting, but I'm hanging there in the hopes of restoring my PC; any advice or help is greatly appreciated!

  Inside of the black rectangular box containing the power supply for your PC that there is no battery inside.

  The box with wires connecting your PC to the power of the House is called a power adapter.  Inside the power adapter, there is a transformer, diodes and a control circuit current voltage\. It's what made sure the power to your PC is what it takes.

  A flashing led on the power adapter indicates a malfunction of the power supply or the motherboard of the PC adapter.

  You have all other USB devices that the mouse or keyboard connected to your PC when you try to start it? If the answer is Yes, then disconnect devices.

  Was there recently a lightning storm or power outage at your home?

  Best regards
  ERICO

• TouchSmart 320-1030 the bios has been updated to manage an AMD A8 - 3870 K Quad Core 3.0 GHz unlocked APU

  AMD A8 - 3870K Quad Core unlocked 3.0GHz APU, Socket FM1, 4 Mb L2 Cache, 32nm (AD3870WNGXBOX) 100W

  Has been updated the bios to manage this APU?

  Thank you

  Brad

  No BIOS updates to the still for your 320-1030 TS, based on 'Software downloads & Driver for HP TouchSmart 320-1030 desktop'. Do not expect to see an update that supports a CPU "unlocked" as HP does not generally support this configuration.

• HP TouchSmart 320 to connect to the TV?

  I have a HP TouchSmart 320 and want to know how to connect my computer to a TV?  There is no visible HDMI port... I don't see the USB ports.  Can I connect my computer to a TV with usb cables?

  JAMoulton87, welcome to the forum.

  This is an adapter that allows you to connect the USB port of the computer to the HDMI port on the TV.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• My Windows media Player on my PC 64 bit of HP Touchsmart 320 seems to play (extended) oversized movies

  My Windows media Player on my PC 64 bit of HP Touchsmart 320 seems oversized movies (expanded) so that they are not visible while playing well on a memory stick on my TV. I downloaded your Fix It tools, and it made no difference.

  Judy

  Original title: Windows Media Player

  Hi Judith,

  Thanks for posting your question in the Microsoft Community forum. I understand that you have a problem with playing movies in Windows Media Player.  I'll help you with this problem.

  1. don't you make changes to the computer before this problem?

  2. what fixit tool did you use?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Open the troubleshooter in the Windows Media Player library: http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2.

  Open in Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

  (b) extend the functionality of media and uncheck the box next to the Windows Media Player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

  (b) extend the functionality of media and check the box next to the Windows Media Player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to remove any viruses found.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Why the beats start file is not found on my TouchSmart 320-1050?

  I have a 320-1050 Touchsmart from HP with Windows 7 64 bit operating system.  When I try to open the software of beats, I get an error message saying that the boot file is not found.  I have not made any changes to my computer and that you have not added new programs.

  Hello Shirley,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56045.exe

  One time finished, open windows control panel, open programs and features, locate the Audio IDT entry, right click and select uninstall.

  When this has completed, restart the computer.

  Let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• can I add memory to my hp touchsmart 320 and increase of 4 GB to 8 GB?

  I bought the 320 in January with 4 GB of memory but would now switch to 8 GB. Is this possible?

  Hello

  You can add the 8 GB, as I said, by placing the memory following modules:

  8 GB (2 x 4 GB) DDR3 PC3-10600

  You just buy them and your husband can install them.

  Consult this manual that explains how you can do it.

  http://h10032.www1.HP.com/CTG/manual/c03094783.PDF

  Thank you