Connection and share a HP4500wireless

Similar Questions

• With the help of a PIX501 to secure and share an internet connection by cable

  Hi all

  I bought a PIX501 to secure my home cable modem connection and share it around my house. The PIX will act as a DHCP client (my ISP uses dynamic IP addressing) and use nat and DHCP break with my small number of inside customers.

  The default setting (set using the set up of PIX) seems ok - but I did a little "do-it-yourself" after some negative PIX customers I've read here in the United Kingdom.

  Specifically, I: -.

  -A refused requests incoming icmp (to make the "invisible" PIX to the outside world)

  -Created an access list to allow answers to my outgoing ping (something every geek network must be able to do)

  -The value "string fragment 1 outside" to drop incoming fragmented packets

  -Limit the number of connections to 200 and embroyonic at 50

  -Activated floodguard (although I don't think this should be necessary on such a lightly loaded network)

  -Compatible console logging so I have at least a bit of history of all attacks

  -Reduced some of the delays of the connection of their default values

  As I have a relatively new to this kind of thing anyone have specific advice or tips for a pix used this way?

  Thanks in advance,

  Andrew.

  When you work with ICMP, remember that [icmp] command to assign ICMP messages for the pix as the host, while the [access-list] command is used to assign ICMP messages that pass through the Pix.

  If you are using IPSec tunnels through the Pix, you can consider letting in string fragment of 2 sizes. IPSec creates broad enough to cause a lot of packets to be fragmented. Path MTU discovery would prevent, but many networks prevent incoming requests that allow the discovery to work. For this same reason, you can also consider allowing the Pix to get unreachable inside your host name if you the Pix end VPN tunnels. [icmp outside any unreachable towing]

  Floodguard is enabled by default and does not need to be enabled. It should not be necessary on a little loaded network, but it would be necessary at the time of a DoS attack if you are Pix does authentication "uauth" of traffic entering or leaving the network.

  If you are interested, the Pix can authenticate users inside before allowing the traffic leaving using RADIUS. This is useful in situations like a web server inside is attacked from outside. By the application of authentication for other traffic to leave for offending guests options are very limited. A timeout is used to trigger authentication again after some time. The [floodguard] is used to protect this feature "uauth' of the Pix.

  The Pix has signatures VERY BASIC integrated IDS that you can activate by using the set of commands [assessment of intellectual property].

  Enable SSH for authentication and encryption by generating an RSA key and saving it to Flash. [AC product key 1024 rsa] and [ca save all] disable telnet by removing all orders [telnet] and replace them with [ssh]. [http] should also be limited as much as possible for the administration.

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• Connect a Vista PC (host) with an XP PC in LAN and share the internet connection.

  I connect to internet using 3 different notebooks with Windows Vista with a wireless connection to a router and the DSL modem. I have a desktop PC XP computer in a secluded spot in my house, who does not have a wireless card. When I want to use the internet in Office XP, I connect it to a laptop using a LAN cable.

  I was able to do that with 2 of my notebooks (set up the network and share the internet), but with the third Vista notebook, desktop XP can't get the internet connection established. I was not able to detect which is the problem.

  First question: clues to debug this problem?

  Second question: I would like to start over again and configure everything again with this third book. How should I proceed?

  Turn on Internet connection sharing on the Vista wireless network connection.  If asked what to use for the home network connection, tell him to use the connection to the Local network. Then check the State of TCP/IP on both computers:

  1. On the Vista computer, right-click on the connection to the Local network, and then click on status > details . It must show:
     • IP address: 192.168.0.1
     • Subnet mask: 255.255.255.0
     • Default gateway: no
     • Server DNS = none
  2. On the XP computer, right-click on the connection to the Local network, and then click on status > support > details . It must show:
     • IP address: 192.168.0.x (1<>
     • Subnet mask: 255.255.255.0
     • Default gateway: 192.168.0.1
     • = 192.168.0.1 DNS server

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Make an ad-hoc and share the LAN connection to the Wi - Fi

  How can I get the tab share for my mini HP laptop so I can make an ad-hoc and share the LAN connection to the Wi - Fi so I can get internet to my iPhone. (otherwise the laptop do a hotspot) window 7 I think I

  Hello

  I suggest you to see link and check if it helps.

  Set up a computer-to-computer (ad hoc) network: http://windows.microsoft.com/en-US/windows7/Set-up-a-computer-to-computer-ad-hoc-network

  Hope this information is useful.

• Unable to connect to shares while browsing but can with Cmd - K

  When I click on the globe in the sidebar, I see a list of network resources.  I click on our file server, then connect as and tells me "cannot connect".

  I go to the exact same server menu GB (afp://serveraddress) and it connects; I chose a few actions.  The actions appear as a disk on the desktop and the server appears in my section shared of my sidebar.  But if I click on the server in the sidebar (in the display of the column), the next column is empty with a message "cannot connect". But he did not fail because I'M connected and can access shares on my desk.  There is even a button next to the server, so that he knows clearly that it is connected.

  I tried to kill com.apple.sidebarlists.plist, that has wiped out my sidebar back to default, but it still happens, and it is not only my machine.  Anyone else get this?

  The server is 10.11.  Server and clients on the same subnet.

  Thank you

  The f

  

  Have you checked the keychain to save user/pass for the server? (look for the Keychain for file server. XXXXX)

  If you have a password saved in there, you could try to remove it.

  The computer is joined to a domain? OD and or AD?

• Cisco show and share the single v 5.3 sign on

  Hi Experts

  I have a request from my customer about Cisco see the and share identify yourself? The problem for my client who, after, connect you to the SNS, it redirects to DMM, and this solution for my client isn't an acceptable way and not secure for authentication, my client asked me to get a solution to allow sign in and also the authentication of SNS only, without redirecting to DMM. Any idea, please.

  Thank you very much

  Hello

  During authentication to connect to SNS should be made using DMM.

  Thank you

  Please note all relevant information

• iPhone - ASA VPN connects and gets disassembly

  Hello world...

  I have a VPN working properly on a 8.0 (5) ASA, but when I try to connect from an iPhone (IOS 5.1.1) it connects and immediately Gets a teardown.

  Any thoughts?

  Thank you!

  can you pls share your config ASA and advise what group policy, you use for iphone users?

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

  Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

  I tried to work offline at home after working online for a while. The sign came and wrote

  «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

  However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

  "The network is not connected TRYagain.

  It was the only option, does not allow me to continue offline...

  You have an idea why I couldn't?

  An Internet connection is required the first time you install and your creative Cloud of license applications.

  You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

• Photo editor app and share via Facebook option

  I'm building an application that will allow users to modify their photos (in a different way that apps photo editor integrated) and then download on Facebook.

  My question is - is it possible to use features of the OS to 'share' Facebook directly from the AIR, so if Facebook is already configured on a device it will use its settings to connect and upload a photo.

  Or I need to use the Facebook Graph API and anything that works me start from scratch? Of course, that would mean that even if a user has already configured a native Facebook application to use their credentials, they will have to be entered again for my AIR application?

  Actually, no, you don't have to do the user log. It is called single sign-on.

  Check out it:

  http://www.saumitrabhave.com/2011/10/Facebook-single-sign-on-for-air-iOS.html

  Although I'll say good luck - I got no chance at all for the mobile version of the API to work at all.

• EDIT, CREATE and SHARE panels disappeared

  Hello

  I've updated PSE9 with some data camera raw under updates and since tabs change create and share did nothing as am so not able to create calendars, etc.

  I tried to reinstall PSE9 and revert to a previous version in Time Machine but same problem

  Any help please?

  Thank you

  Rick

  You cannot restore from Time Machine PES, cordially. There pieces all over your hard drive, and the connection is broken when you try. Ditto for use the migration assistant to move it to a new computer. It may seem, but it will eventually fail.

  I agree with 99jon that resettlement will probably be necessary, but you can try first to remove all the prefs and paths:

  Go in your username > library > Preferences and delete:

  com.adobe.PhotoshopElements.plist

  Adobe Photoshop Elements 9 paths

  Settings of Adobe Photoshop Elements 9

  repair permissions, and then try again. If it still does not work, reinstall time.

• ITunes store does not connect and then does not close help please

  OK, so pretty much whenever I try to enter the Apple store that I get a little pop-up that says it can not connect to the Itunes store, I have to check my connection and try again, but whenever I close this box it appears immediately back to the point I can not even close Itunes with having to go Task Manager and ending the process manually.  I can't use the store at all and it's just getting really frustrating, because I know my connection and everything is not fine so it is no reason for this pop up.

  is anyone else having this problem or if you have had this problem and know how to fix?

  Hello LadyJibril,

  Thank you for using communities of Apple Support.

  I see that you have problems connecting to the iTunes Store. I would recommend from the suggestions in this article: If you can not connect to the iTunes Store

  If that doesn't help and you still have questions, then you can proceed to the procedure described in this article: Advanced steps for fixing iTunes Store connection issues

  Best regards.

• I think my account has been usurped. Tried to connect and change the password. Unrecognized user name.

  People I know receive emails from what appears to be my [email protected] account. I tried to connect and change my password and get an error message saying that the account is not recognized.

  Try the Gmail Help Center - which is not a problem of Firefox support.
  https://support.Google.com/mail/?hl=en#topic=3394144

• I would like to know if the IPOD Nano is able to connect and play the music of my Time Capsule Machine. Thank you

  I would like to know if the IPOD Nano is able to connect and play the music of my Time Capsule Machine. Thank you

  N ° iPod nano can play that media that is loaded on it.

  TT2