Connection bluetooth headset without driver

Similar Questions

• Bluetooth headset without driver

  I recently bought a Bluetooth dongle for my 64-bit computer to windows 7 and a pair of Bluetooth headphones. Dongle Bluetooth installed perfectly, but when it became time to pair the helmet he had a problem.

  Bluetooth Dongle has been able to see the headset and pair with them but sought windows drivers from windows update and returned as drivers not installed or no driver found something like that.

  I have downloaded Microsoft Windows Mobile Center thing or something else, but it didn't work. There were 3 exclamations in the device manager that I followed the steps, but still it did not work. I uninstalled and deleted the helmet of Bluetooth devices and the reinistalled the rebooted the computer once or twice but still can not get to work. Any help is appreciated!

  The new work of dongle... it came with a disk with the driver and everything. I got my money on the original dongle. Thank you for your support. Of course, the first dongle was defective.

• Unable to connect Bluetooth headset

  Original title: need help on the BlueTooth device and other things about that.

  Hello

  I'm in a position really distressed, so, basically, last year (about 2013 November), there were a few problems in sending files from my laptop to my phone, so I thought that bluetooth driver does not work properly, I don't remember anything correctly. I have a Dell XPS 1404 (or something, this is a fine model of 2010). So I thought that and uninstalled this driver in Device Manager, which was a BIG mistake. It was a Broadcom driver as far as I remember, or such. I tried to install the latest driver at this time there, but could not do so, there was a mistake. Now, I can't connect my BlueTooth headset to my laptop and when I connect the DELL BT travel mouse, it connects, but the problem is, the cursor is not going fast, I really don't know what to do. I tried the system restore, but it doesn't have an option for nearly a year there. Please do help me. Now when I go to device, under Bluetooth Radios Manager, there is a pilot who cannot start the device or other, there are only 3 drivers at the moment. I don't REALLY have to remember there's 3 or 4 before one year. Any solution to this?

  AND when I go to the properties for this driver of non-working (which I tried to install both types of drivers on it, then this might work, but there not at all), and when I go to details > hardware IDs, this is the ID, do work to tell what is the real device? or is it about the driver?

  BTHENUM\ {0000110a-0000-1000-8000-00805f9b34fb} _VID & 0001000f_PID & 0000
  BTHENUM\ {0000110a-0000-1000-8000-00805f9b34fb} _LOCALMFG & 000f

  Thank you in advance, hope, I get a response soon.

  Hi Moriya,

  Please keep us updated and my apologies for the late reply.

  If the troubleshooting methods didn't it it helped, I recommend that you contact the manufacturer of the Bluetooth device to check the latest version of the driver that is compatible with Windows 7.

  Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Problem connecting Bluetooth headset.

  I just got the MotoRokr S305 Bluetooth headset from the MotoStore. It's for my MotoKrzr K1m phone.  I've matched to them. I can not get my music to play through the headphones.  Does anyone know how? You experience the same problem?  You can help me solve mine.

  Are you hearing calls OK, but just cannot listen to music?

• Bluetooth device without driver

  I connected my phone to the pc via Bluetooth, and he showed me this in Device Manager:

  

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  I tried to use the driver to update automatically, but:

  

  hardware ID is:

  BTHENUM\ {00001801-0000-1000-8000-00805f9b34fb} _VID & 00010075_PID & 0100

  BTHENUM\ {00001801-0000-1000-8000-00805f9b34fb} _LOCALMFG & 000D

  my pc spec:

  

  Hello

  Please contact Microsoft Community.

  I suggest you to refer to the troubleshooting mentioned and check if it helps:

  Run the troubleshooter from the link below and check off the results: open the hardware and devices Troubleshooter:http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  In the device properties dialog box, click the driver tab, and then click Update driver to start the Hardware Wizard update. Follow the instructions to install the driver.

  Download the drivers from:http://www.nikonusa.com/Service-And-Support/Download-Center.page

  See also:

  https://TechNet.Microsoft.com/en-us/library/cc731268%28V=WS.10%29.aspx?f=255&MSPPError=-2147217396

  I hope this helps.

  Kind regards
  Anusha

• Unable to connect Bluetooth headset direct Apple Watch 2

  None of my Bluetooth headphones is directly connected to my Apple Watch 2.

  They connect successfully to both my iPhone on iOS10 and my IPad on iOS9.

  Thank you

  Gary

  Hello

  It can help to turn off pairing your headphones for your iPhone / iPad before their pairing at your Apple Watch.

  Also, make sure you put your headphones in pairing / discovery mode, in accordance with the manufacturer's instructions.

  It can also help move the watch and the helmet away from any device Bluetooth enabled when their pairing.

  More information:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• Connection Bluetooth Smartphones blackBerry drive

  Please can someone help. I connected my new Blackberry Torch to my car via bluetooth and everything works fine except that it does not automatically connect when I get in the car and I have to keep saying yes on my device.

  When I got my storm it always automatically connected when I was still near th ecar if th eengine was running. The torch does not seem to do that.

  Advice please.

  Sue

  
  

• Unable to connect bluetooth BH-700 headset for Intel Centrino wireless n-1030 Bluetooth properly (without audio or feature after pairing)

  I spent countless hours trying to figure why my new bluetooth headset (which matched perfectly my evo 4g) not be will pair correctly with my 1030 n.  From what I understand, some have speculated that this is because it lacked the A2DP Protocol from the driver or I have to configure a COM port.  I deleted and reinstalled the device a half-dozen times as well as research in audio playback devices (where it is not found) for trying to run after he pairs.

  To be as clear as possible, I can "pair" the device, it installs successfully the "pilots", but I can't use to listen to music or run any other useful function.  If someone can think of a solution to this, I'd appreciate it.  I talked to the CSR at LG who suggested I look on google to find out how to enable an A2DP connection with the device, but I can't find anywhere, anything that even partially solves this problem.  I found only 2-3 others with this problem and no one has found an answer, but I thought I'd take my chances.  Thanks in advance.

  The Bluetooth A2DP module is usually supplied with most non Microsoft Bluetooth systems.  Microsoft seems not to allow in any audio on their integrated Bluetooth system.

• AirPlay only list bluetooth headset after the connection

  Hi all

  I wanted to see if it's just me or other people see this. I use iPhone 5 that I've recently updated to iOS10. In my daily use, I connect headphones bluetooth (4.0), MPOW Swift is the brand, to listen to music or watch YouTube videos. With iOS 9.x I never had a problem with the headphones recognized and used by all applications via AirPlay immediately. With iOS 10, which is not true. They connect as I see the icon in the status bar of the phone and Bluetooth settings section says that it is connected but when I go to music app and click on AirPlay they are not listed. I found to solve the problem, I must forget the device to the headphones and then repair and immediately their names still AirPlay and sound comes from the app through the headphones. This is the best though, if I turn the headset off power (disconnect device), then reconnect, I'm back to the same problem where they do not appear in the AirPlay and I pairing again.

  Anyone else see this problem? Unfortunately, I don't have another bluetooth headset to test this.

  Thank you!
  Jeff

  I'm having the same issue. It happens with all my Bluetooth devices. The Bluetooth is connected, as indicated by the icon in the status bar, and the said device. But music, iHeartRadio etc. play via speaker phone. Curiously, the phone works via Bluetooth and the active key Siri is not a problem of Bluetooth.

  I did some research and tried to reset my network settings as recommended without result. Now whenever I turn in a Bluetooth device, I have to connect manually if I want to use it for anything other than the functions of the phone. Very annoying.

  Apple, any suggestions?

• Need driver for bluetooth headset

  I have an Andoer Ma-826-2 bluetooth headset.
  Where can I find the reader for these headphones. PC Toshiba Qosmio G50-12 q asks me to install the player, but that "the producer has planned.
  Actually in the manual for the connection is not the installation of the player.
  While the PC asked for me. In support of the drive for toshiba there is usually bluetooth headsets that apply to most headphones?

  Tank you

  Toshiba does not support third party software so if you need driver for some device you must visit the support page of s manufacturer.
  Everything you get from Toshiba is BT driver for your laptop.

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Driver for Bluetooth headset

  I bought a JBL E50BT Bluetooth headset and I was able to pair it with windows 7 but windows 7 can not find a driver for them at all. I contacted the manufacturer and they said that they are compatible with windows 7 and Microsoft should provide the driver. Any idea where I can get the driver?

  I already checked the updates and my windows 7 is completely up to date.

  Thank you

  Hello

  Have you tried pressing the Bluetooth button on reboot to see if it will connect on reload?

  If you have them paired with Windows 7, open the Device Manager

  In the menu, click Action > search for new hardware changes

  Go to the pc manufacturer's Web site and download the latest driver Bluetooth for your computer.

• How to connect my LG HBS700 Bluetooth headset for computer laptop windows 7

  Hi, I have a LG bluetooth headset

  http://www.LG.com/us/cell-phone-accessories/LG-HBS700-tone
  With this bluetooth headset, I wanted to connect my computer laptop windows 7.
  I am able to pair this head game, but it still doesn't show any list of sound settings where I can choose bluetooth together as my default helmet.
  Please help me to play music from my laptop via this Bluetooth LG headset. HBS700

  PROBLEM SOLVED:

  In fact my Windows 7 used OLD Bluetooth drivers for the device HP laptop.

  So what I did is, 1) is went to the HP site 2) found support my model 3) selected drivers drivers 4) installed Bluetooth drivers 5) combined the head game. (6) make a right click on the device coupled--> you will get an option called "Controls" [if not its simple - your bluetooth driver no is not updated]
  (7) then after you select "Controls" - you will get a screen to connect / disconnect option.
  (8) select the Connect button
  (9) installation it will require drivers for your device.
  (10) then you are READY to USE your Bluetooth Head set.

  I'M VERY HAPPY :) that my head set work with my laptop... :) Thanks to my friends :)

  -Anya Prasanna @ Banagalore, India

• Bluetooth headset not self-holding not connects, disconnects

  Hello

  My hardware: Bluetooth headset Motorola S9 HD + Lenovo X 61 Tablet.

  Successfully, I established the connection and could use S9 as helmet.

  Issue 1: But after that I turned it off the coast and later on - Windows 7 would not auto connect.

  Problem 2: OK, that would not automatically, so I'm going to devices, open S9, click on connect. It works (not always, but most of the time), but then if I close this window of the Explorer "Motorola S9 - HD", Windows unplug the unit! Why should I keep this open Explorer window using the headset? No sense at all.

  Michael Entin / / this posting is provided "AS IS" without any guarantee and does not give any

  Hi Michael,

  Also see the following link for a similar position and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2fdc6964-78f6-468F-98c2-a1a9c7ffadce

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect bluetooth on Windows 7 headsets

  on Windows XP 32 and 64 WinVista, I had no problem whatsoever to find connection and configuration of my bluetooth headset with my micro USB bluetooth adapter. all the drivers for the adapter and the helmets were found and installed by Windows Update. but not on Win7 64.

  Win7 found the latest drivers for micro adapter and it seems to work fine. However, when I try to connect my bluetooth (Sony DR - BT100CX & Jabra your BT8010) helmet, they will be detected and identified, but Win7 cannot find the drivers. I get a window saying "software device driver has been properly installed.

  now, I can only come to the conclusion that it is a matter of Win7 because everything still works just on my XP and Vista computers. None of my headphones came with a CD of drivers packed, nor not found drivers on their respective manufacturer sites, but it wasn't a problem with XP and Vista. anyone can shed some light on this? any help would be most appreciated.

  Sorry for the late reply. 2 month flies by when you're overworked and underpaid ~ LOL ~

  Anyway, here's the resolution that I found:

  Log on as administrator.

  That's all. log on as an administrator to install the drivers correctly. even if your user account can be considered an admin account, it really didn't complete full access for Win7. I had similar problems while trying to install other drivers, but logging in as admin eliminated install questions completely. now, whenever I need to update drivers or install new programs, I always log admin to avoid any problem, that it is =)

  It was the fastest way I've found to access the admin account:

  1) click Start

  (2) in the search bar, type in cmd and run

  (3) type net user administrator / Active: Yes

  (4) restart your computer

  (5) once the loads of the Welcome screen, the administrator account will be available for access alongside other user accounts

  the first thing we do is to create a password, then go ahead and install all drivers and programs you want.

  to hide the admin account again, just repeat the steps 1 to 4, except in step 3 change/ active: yes/active: Yes to / active: No.. Once you restart your computer the admin account will not be on the Welcome screen.

  Thanks again guys, and I hope this helps others solve their problems =)