Personalized 9800 slider TextBoxfield problem

Similar Questions

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• I received several phone calls from a person claiming there is problem on my pc

  original title: phone calls

  I received several phone calls from a person claiming it is your business. Is this a real employee with your company? He says there is a problem with my PC and he can fix my computer. Is it a scam?

  Please see the article on the link below.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-received-a-phone-callemail-from-someone-saying/968f23dc-b7c1-4C8E-95A2-f89dde500ab8

• Slide transition problem

  Hello! Here's the problem I am facing a sample app developed to learn the transition between slides.
  The effect I want to achieve is similar to that used on the blackberry os in the home screen: buttons are arranged horizontally at the bottom of the screen and when you drag the trackpad down other buttons are revealed.

  Leaving aside the problem already solved on the Organization of the various elements of the UI on the screen, I have developed a home screen, the screen that you see when you open the sample application and a second screen, the screen that slides to the bottom of the screen.

  The home screen is completely opaque, while the second screen has a transparent background in the upper area, let's say 1/3 and a partially transparent with the remaining 2/3 bottom.

  This is the code that implements and enable the transition from the home screen to the second screen:

  protected boolean navigationClick(int status, int time) {
      engine = Ui.getUiEngineInstance();
  
      transitionIn = new TransitionContext(TransitionContext.TRANSITION_SLIDE);
      transitionIn.setIntAttribute(TransitionContext.ATTR_DURATION, 400);
      transitionIn.setIntAttribute(TransitionContext.ATTR_DIRECTION, TransitionContext.DIRECTION_UP);
      transitionIn.setIntAttribute(TransitionContext.ATTR_STYLE, TransitionContext.STYLE_OVER);
  
      transitionOut = new TransitionContext(TransitionContext.TRANSITION_SLIDE);
      transitionOut.setIntAttribute(TransitionContext.ATTR_DURATION, 400);
      transitionOut.setIntAttribute(TransitionContext.ATTR_DIRECTION, TransitionContext.DIRECTION_DOWN);
      transitionOut.setIntAttribute(TransitionContext.ATTR_KIND, TransitionContext.KIND_OUT);
      transitionOut.setIntAttribute(TransitionContext.ATTR_STYLE, TransitionContext.STYLE_OVER);
  
      new Runnable() {
          public void run() {
          Screen next = new SecondScreen();
              engine.setTransition(null, next, UiEngineInstance.TRIGGER_PUSH, transitionIn);
              engine.setTransition(next, null, UiEngineInstance.TRIGGER_POP, transitionOut);
              UiApplication.getUiApplication().pushScreen(next);
          }
      }.run();
  
  return true;
  }
  

  The transition is working as desired and as expected when you press the second screen on the top of the home screen: I can see the homescreen remaining fixed and the second screen appearing with the movement of the slider.
  The problem arises when the second screen to bring up the home screen to burst again: now, instead of having the second screen sliding down, I see the display content while descending.

  I think that the error is in the transitionOut attributes, but I tried a lot of combinations of values without success.

  The code is targeted for API 6.

  Solved...!

  This is the code that the effect to work properly!

  protected boolean navigationClick(int status, int time) {
      engine = Ui.getUiEngineInstance();
  
      transitionIn = new TransitionContext(TransitionContext.TRANSITION_SLIDE);
      transitionIn.setIntAttribute(TransitionContext.ATTR_DURATION, 400);
      transitionIn.setIntAttribute(TransitionContext.ATTR_DIRECTION, TransitionContext.DIRECTION_UP);
      transitionIn.setIntAttribute(TransitionContext.ATTR_STYLE, TransitionContext.STYLE_OVER);
  
      transitionOut = new TransitionContext(TransitionContext.TRANSITION_SLIDE);
      transitionOut.setIntAttribute(TransitionContext.ATTR_DURATION, 400);
      transitionOut.setIntAttribute(TransitionContext.ATTR_DIRECTION, TransitionContext.DIRECTION_DOWN);
      transitionOut.setIntAttribute(TransitionContext.ATTR_KIND, TransitionContext.KIND_OUT);
      transitionOut.setIntAttribute(TransitionContext.ATTR_STYLE, TransitionContext.STYLE_OVER);
  
      UiApplication.getUiApplication().invokeAndWait(new Runnable() {
      public void run() {
          Screen next = new SecondScreen();
          engine.setTransition(_screen, next, UiEngineInstance.TRIGGER_PUSH, transitionIn);
          engine.setTransition(next, _screen, UiEngineInstance.TRIGGER_POP, transitionOut);
          _manager.hideFooter();
      UiApplication.getUiApplication().pushScreen(next);
      }
          });
      return true;
      }
  

• Installation of personal Smartphones email blackBerry problem

  Hey guys and girls, I got a curve today with tmobile. I went through the Setup Wizard and arrived to the configuration of email and ran into a problem. I hit "create or add personal email" make sure that it is then selected, hit, when I get to the next screen, it tells me that when I type then it will give me the shape and the region to put in place. I hit next, it puts me online, flashes a tmobile logo, then gives me an advertisement of suzuki and stop loading. I tried to do this on my laptop, I tried to do it on my blackberry through tmobile network, then tried it on a wifi network. no work. Help, please!

  It's strange... never saw an announcement from suzuki on the Tmobile website.

  Try this, your browser > Options > browser Configuration > uncheck JavaScript popups and save.

  Do you get this same announcement of Suzuki on your laptop?

• BlackBerry Smartphones Blackberry Torch 9800-device update problems

  Recently received a notice on my BB Torch 9800 that my device was in need of an update of the software of the device of the RIM. Update I noticed that all my settings have changed. All the programs I downloaded now passwords still need once and all my settings i.e., ringtones, calendar alerts, are changed. I have to go through this every time that RIM indicates that a software update is available? Gives a never want to update. Gets to be a chore.  Initially, it took several attempts to get rid of the annoying alerts, birthday and anniversary repeated that kept appearing on the homepage. Whenever I get a alert now to a text or an email, I begin to receive a list of all alerts birthday, 20 to 30 of them, all over again.  The programs I use, like Poynt and YB (directory telephone yellow pages) are now asking to accept the terms and launch service all over again.  This happens whenever a software update is available, and import these software updates to do?

  Welcome the aggressors!

  Upgrades are not absolutely necessary, but if you are like me, I always have the latest and best on my devices.

  I guess you did your upgrade of the device over the air?  I have yet to try an upgrade in this way.  I prefer the old way via the Desktop Manager or using BBSAK (BlackBerry Swiss Army Knife - a pure small utility app).

  You do regularly backups?  If not, it's something you should do, especially in a case like this where you have lost all your settings.  Any upgrade process should offer you the chance to save your device before installing the new OS.  As I said above, I have not yet tried the OTA Update method, so I don't know how this process works in what concerns the backup of your device.  Whence the back up to go, anyway?  And how get it back you if something is wrong?  These questions alone made me hesitate to use the method of the OTA.

  Anyway, as you have discovered, one of the disadvantages of upgrades of the OS is having to reset your third-party applications.  Unfortunately there is no way around that.

  In summary, if your device does what you want it to do and you're not having any problems, ignore the advice of update and leave well enough alone.

• Delicate design, positioning and Organisation of objects on Master Slides quiz problems

  Hello

  I just upgraded to 9 Captivate and would switch to suitable designs.  Some problems, however.

  First of all, when I try to modify the positions of certain objects on slides in quick mask mode, the Position of the object on the tab Position have right and left gray.  I, for example, like to move and position of in the MCQ response boxes would design ('Type 1 from here' etc) to the left of the slide to make room for images on the right.  For some reason, I'm not allowed to do any settings on the tab position I try (and I think I tried them all).

  Secondly, the menu item "organize" is grayed out and if I put pictures on the slide, they fall behind the objects already here and cannot be ' brought forward "."  I don't know why the new objects (i.e. images) fall behind the other objects permanently.

  This means that I can't move some existing objects as I would like and I can't put pictures above them either.

  Very clearly, I'm doing something wrong, but the research, as I might, I can't find answers, and I'm starting to think better to return to the inadmissible designs.

  Grateful for any help, anyone can give.

  Richard

  Your question is not quite clear to me, but he can offer you already some explanations.

  Questionnaire slides have very strict rules. All objects incorporated, those are the objects without an individual timeline, are always on top of the stack. You can't have custom objects appears above one of the built-in objects. I found a few exceptions as described in this article:

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

  What I said now is not specific to a sensitive project, but to all projects.

  With respect to positioning, see what you mean: you cannot resize the boxes of individual response, nor the overall box on the master slide, but you can on the slides of individual questionnaire. Look at this slide:

  

  I started by looking at the Advanced setting: by default, it is set to align horizontally, be sure to uncheck this option.

  For answers: select the global zone that has all the answers. You can see I've changed its size and position.

  I hope this can help?

• Question slide insert problem in Captivate 9 Responsive Design project

  I'm trying to insert a question after a slide in the project but Captivate keeps placing below the new issue with a pile of other issues in the project. When she did this, I can't move the slide to the post I want to in class stream nor can I move any other current slide. What should I try?

  That's what I did: I deleted the cache. I tried the previous iterations of the project without result. A conditional question: I am not connected to the internet on this computer. which would affect the behavior of classes?

  I don't know if there is any problem with how to set quiz preferences but I don't know that I have not had any problems with the insertion of slides where I wanted them earlier in the development of the project.

  Thanks in advance for your help.

  Chris

  The usual reason for this behavior is that you try to insert a quiz with Questions before the test.  Questions before the test can be placed at the beginning of a lesson BEFORE all other issues for the main quiz quiz.

  You may have several types of quiz in this module?

• Audio to slide sequence problem

  Hello - I am a high school teacher in video that used the first for years.  I have a new problem I've ever seen elsewhere.  When one of my students defines the first entry and exit point from a file and he hangs out in the sequence of the video and audio will appear.  Unfortunately, each subclip after it renewed with in and out points brings only the video when it is moved in the sequence.  This happens for any computer in the lab, she is- and that doesn't happen to him.  She is also not using the 'slide only Video button.  When we try to use the "Drag" Audio only to bring in the audio, we get the circle with the line through it, and it doesn't drag us.

  Any suggestions?

  Thank you

  Jay

  Is ticked this box (or other way)?

  

• Slide jump problem with playback?

  Our staff is using 9 presenter and record of the Powerpoint 2010 slides (do not use the slidewshow playback feature but manually advance)

  During playback, they report that the slides are being ignored.  Someone else has encountered this and if so what was the solution?

  Thank you

  Talked to support several times.  Most seemed to be unaware of this problem, but I managed to find someone who really wants to understand.  After a lengthy exchange on an online chat, he gave me some suggestions and it works so far.  First suggestion is to move my file Power Point from source to the same drive as my presenter (the 'C' drive) OK, no harm, no fault.  Next idea was to launch PowerPoint in administrator mode.  I use Power Point 2013 and presenter 10.  OK, that did the trick.  I ran the same work and no slide ignored after that I recreated the output.  I also tried a larger Power Point file and everything looked good.   Worth a try.  Right-click on the Power Point icon and go to properties.

• having the image alignment in slide show problem

  THW slide show can be seen here http://www.jimslounge.com/slideshow/bio.swf

  The images are added to a background MovieClip they are set to align to the horizontal and vertical center.  They used to do, but often, they are a little off and sometimes they are way off.  Photos are added tha a Sprite called holder and holder is added to the background MovieClip holderBG the problem is in the displaySlide function.  I noticed that the alignment problem seems to go away when I create a new instance of the holder there but when I do that climates steadly use upper memory with each new slide.

  import com.greensock;
  com.greensock.easing import. *;
  import flash.display. *;
  import flash.utils. *;
  import flash.events. *;
  flash.net import. *;

  var myFont:Font2 = new Font2();
  var externalReq:URLRequest = new URLRequest ("bio.txt");
  var externalLoad: URLLoader = new URLLoader();
  var myFormat:TextFormat = new TextFormat();

  var bars: Bars = new Bars();
  var n: int = 0;
  var intCurrentSlide:int;
  var req:URLRequest;
  var holder: Sprite = new Sprite();
  var holderBG:HolderBG = new HolderBG();
  var loader: Loader;
  var int rand;
  var nxtNum:int;
  var picNum:String;
  var slideCount:int;
  var xmlLoader:URLLoader;   Slideshow xml loader
  var xmlSlideshow:XML;  Slideshow xml
  var strXMLPath:String = 'bioPics-"Data.xml" ';
  var slideName:String;
  history of the var: Array = new Array();
  var duration: number =. 5;
  var prevSlide:String;
  var timeline:TimelineMax;

  
  addChild (holderBG);
  holderBG.x = stage.stageWidth / 2 - holderBG.width / 2;

  xmlLoader = new URLLoader();
  xmlLoader.addEventListener (Event.COMPLETE, onXMLLoadComplete);
  xmlLoader.load (new URLRequest (strXMLPath));
  ///////////// text setup ////////////////////
  myFormat.font = myFont.fontName;
  myFormat.size = 14;
  myFormat.leading = 2.5;
  
  bioText.setStyle ("textFormat", myFormat);
  bioText.setStyle ("IncorporerPolices", true);
  bioText.textField.alpha = 1;
  
  externalLoad.load (externalReq);
  externalLoad.addEventListener (Event.COMPLETE, textReady);
  /////////////text setup////////////////////////
  createTimeline();

  function textReady(event:Event):void {}
  bioText.htmlText = event.target.data;
  }
  function onXMLLoadComplete(e:Event):void {}
  xmlLoader.removeEventListener (Event.COMPLETE, onXMLLoadComplete);
  xmlSlideshow = new XML (e.target.data);     create new code xml with the data received
  slideCount = xmlSlideshow... image.length ();   get the total number of slides
  loadSlide();
  }

  function loadSlide (): void {}
  prevSlide historical = [history.length - 1];
  RAND = Math.ceil (Math.random () * slideCount - 1);
  loader = new Loader();
  req = new URLRequest (xmlSlideshow.. @src [rand]);
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, displaySlide);
  Loader.Load (req);
  slideName = xmlSlideshow... @src [rand] m:System.NET.SocketAddress.ToString ();
  }

  function createTimeline (): void {}
  Timeline = new TimelineMax ({repeat: 1, repeatDelay:5, onComplete:loadSlide, suspended, yoyo: true: true});
  for (var int count = 1; count < = 10; count ++) {}
  var mc:MovieClip = bars ["bar" + count];
  Timeline.Append (TweenMax.from (mc, duration, {x: "64", alpha: 0, ease:Cubic.easeOut}), -. 4);
  }
  }

  function displaySlide(e:Event_=_null):void {}
  loader.contentLoaderInfo.removeEventListener (Event.COMPLETE, displaySlide);
  / / holder = new Holder();  If I lose the alignment problem but gain a menory problem.
  If (holder.numChildren > 0) {holder.removeChildAt (0) ;}}
  holder.addChild (loader.content);
  / / Center of the photo
  Holder.x=holderBG.width/2 - holder.width/2;
  Holder.y=holderBG.height/2 - holder.height/2;
  make the position of the mask on the peak
  bars.x = Holder.x;
  bars.y = Holder.y;
  bars.cacheAsBitmap = true;
  holder.cacheAsBitmap = true;
  Holder.Mask = bar;
  bars. Width = holder.width;
  bars. Height = holder.height;
  holderBG.addChild (holder);
  holderBG.addChild (bars);
  Timeline.Restart ();
  }

  Sorry my bad I mean this

  holderBG.removeChild (holder);

• BlackBerry Torch 9800 Smartphone camera problem

  I have small problem this is how it goes...
  my camera on my torch starting guard it self takes pictures at random I just did a wipe as soon as the phone lights kicked into the camera when you back out of it lasts 10 seconds or 10 minutes of boots in him? any reason for this or anyone ever had this problem so annoying keep duty click out of it, if not finish 1000s pictures taken any given help very appreciated.

  Is it possible that you have a problem with the key to the convenience that, on the side of the torch, which opens the camera? Go to Options and type "complacency" until the menu for the convenience keys rises. Change the key of the convenience of another application and see if it makes a difference.

• Base buttons slide show problem

  Hello. I customize a slideshow base Panel. When I place an image in the box of left arrow, right arrow box is filled with the same image. By placing a picture on the box to the right, it is placed on the left too.

  Anyone know how I can do to put a different picture for each arrow?

  

  Thank you.

  Hello

  Please, go to the Control Panel options and make sure that "Edit together" is disabled. This will allow you to select different images for the previous buttons and following.

  

  Concerning

  Vivek

• When you perform the Windows Vista phone activation, it does not connect to a real person, said, "technical problem, contact later.

  Original title: I have activation of windows vista problem. When I go through the activation of the phone, it does not connect to a real person. simply said, 'technical problem, contact later.

  I have the problem of activation of windows vista. When I go through the activation of the phone, it does not connect to a real person. simply said, 'technical problem, contact later. Microsoft India has no real people to answer calls? My product is boxed CD purchased at retail store.

  Hello

  Thanks for posting your question in the Microsoft Community.

  I'm sorry to know that you are facing problems to activate Windows Vista and communicate with the support of the Activation.

  It would be useful that you could answer this question to help you further.

  What happens exactly when you try activation online? You receive messages or error codes?

  Here are a few articles that will provide you with information about the execution of activation and fixation of any problems associated with it.

  How to activate Windows Vista

  Resolve activation problems

  If you are unable to contact a live person to perform Windows activation, you can contact Microsoft Customer Service and check if that helps.

  Technical support of Microsoft India

  How and when to contact Microsoft and support Customer Service

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• Phones smart blackBerry Torch 9800 / Bold 9700?

  Hey guys I'm new to bb can someone suggest me please on what phone should I choose. ? Torch 9800 or Bold 9700? & y at - it a problem with the torch 9800 slide? Please think as soon as possible. I'm much too confused to take this call me. Thanks a bunch

  I suggest the Torch 9800. It's a great device.

  More integrated device memory and a better camera, to mention a few things.