Connection disabled for the Nac Agent

Similar Questions

• The NAC Agent running application scan

  Ladies and gentlemen,

  My client is to be on ISE PoC. They want to test the functionality of Posture to run the application.

  I would like to ask: what is the NAC agent scan interval. If I want to use Agent NAC to scan the PC, an illegal demand, but initially, during the connection, the application is not running. After NAC agent notify that it respects the customer, user start this application. The question therefore, Agent NAC detectable by whom?

  Kindly share your experience about it. Thank you for your support.

  Kind regards

  Hiep

  Hiep,

  The feature you requested is passive revaluation and is made on intervals configured by the administrator.

  www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_pos_pol.html#...

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• ISE - profile of the NAC agent

  Dears

  I want to deploy via GPO NAC agent and I need to create the agent profile, I know how to create on ISE, but how to get the file in xml format which will be distributed?

  You can try to install only a single PC (whether by a manual installation or captive portal). If you have set up rules of posture while ISE then the NAC Agent automatically contacts the ISE server and downloads the last NACAgentcfg.xml.

  Then you can browse the following directory and find the NACAgentcfg.xml file in your PC.

  C:\Program Files (x 86) \Cisco\Cisco NAC Agent

  After that, you can deploy mass agent of the NAC as well as the xml file. Well that is not required to deploy the xml file as a I said, every time, there is a rule of posture the NAC agent will download the last available the ISE Server NACAgentcfg.xml.

  Please rate if this can help.

• Problem of the NAC - Agent is a disconnect

  Hello

  We have a problem with the NAC in mode virtual outofband.

  AD SSO, sanitation, everything is working, but the strange things happening: after awhile, when downloading large files, Agent connects to the formula of network users, and the registration process is restarted.

  I disabled the pulsation clocks and timers, session, but we still have a problem.

  Also, while sniffing traffic on the switch port, I noticed that after have correctly connected you to the own Cisco Agent network always send traffic to UDP Port 8905. Is this a normal behavior?

  I noticed problems with this version of the agent causing connections to give up intermittently. I would upgrade to agent v4.1.3.1.

• The NAC Agent autoUpgrade ISE possible?

  Hi all

  I have this:

  802.1 x-window with the NacAgent version (say 1) <---->802. 1 x switch active (RADIUS aaa OK) <------>ISE and AD on the same LAN

  ISE is configured for client provisioning with hardware (NacAgent version 2) downloaded from Cisco's Web site (as described in the documentation)

  I have a basic plan of authentication and authorization that allow me to well but I expect the NACAgent to be upgraded.

  No profiling is configured at the moment.

  Is that someone can help?

  Best regards?

  Hello

  In the ISE settings provisioning client, activate you the option where the NAC upgrade agent is required. However, it is to you to run updates perioidic and map the most recent agent in the configuration of the parameters of the client.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Server connection (5.01) the older Agent (4.3/4.01)

  Hello

  To streamline a set of conversion, we deployed the agent 4.3 to several servers. As a result of an unforeseen problem with another server, I had to upgrade the conversion software to the latest version (5.01). Now whenever I convert a server it tells me that the former agent is not compatible and must be upgraded.

  The problem is that I have a few servers Windows 2000 to convert, and the target is an environment vSphere 4.1. Apparently the Converter 4.01, the last of them in support of Windows 2000 does not support the new environment vSphere 4.1. Is there a a way to trick the server to connect to the older agent? Has anyone tried this before?

  Thank you

  Richard

  You cannot connect Server converter to a different version of the agent, it is hardcoded VΘrifier versions of product.

  Can you try to select a destination 4.1 in Converter 4.0.1? I have not tried, but it should be theoretically possible.

  A clumsy way is to have a conversion step 2: start by converting with the former old converter to vSphere or the host and then, using newest converter - to vSphere 4.1.

  Kind regards

  Plamen

• Why must update the ADF BC connection details for the deployment?

  I know it's a matter of the ADF, but still post in this forum that it was found in the deployment of BPM on OBPM 11.1.1.6. I get a bpm of the internet project and decide to test it on my local. The goal was to complete the payload of the process dynamically, i.e. based on the selection made by the participant on the user interface (a component of ADF to a table of database management is created and made on the form of task for the user to select). I imported the code on my JDev and changed the JDBCDataStore for both Module local <>& module < Module > Shared in running the application configurations to point to a Data Source that I created on my WLS.
  
  Assuming that's all it was necessary to test, tried to deploy the application on my WLS. Deployment failed with a logon - question usname/pws 'incompatibility '. It was very strange because I tested the data source after it is created. It took time for me to understand that it wasn't ' the JDBCDataStore that was causing the problem but it seems that the creator of the application created a database connection to connect to its local database to create the application's business components. I had to update correct 'uname/pwd"(i.e. the one on my local) to run the deployment.
  
  Now coming to the question - I think that connection at the base is a configuration at design time to create business components? Once they are created in the project, the deployment should be agnostic of the environment, as long as we upgrade our TIME configurations correctly? Someone please help understand that. With my limited understanding of the ADF I prefer having an expert comment and clarify this point.
  
  Thank you
  GSR

  Uncheck "Auto generate and synchronize weblogic descriptors - jdbc.xml during deployments" in properties of Application-> Deploymennt-> EAR used for deployment

  refer
  http://theblasfrompas.blogspot.in/2010/05/JDeveloper-11g-ADF-deployment-using.html

• Remote connections disabled after the last update of Windows (Windows XP)

  September 14, Windows Update has installed several security updates.  After installation, my remote desktop connection ability has been disabled and I can't connect to my iPod via a USB connection.  I checked control panel and security settings, but can't find what has caused these deactivations.  Installed updates: KB2259922 KB975558 KB2347290 KB982802 KB981322 KB890830 and KB2141007 KB2121546

  No doubt...

  MS10-066: vulnerability in remote procedure call could allow remote code execution
  http://support.Microsoft.com/kb/982802

  See the section "How to get help" of http://support.microsoft.com/kb/982802

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• News of connection fails for the new installation of Windows 7

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  Try to reinstall Windows and configure the account again, and after reaching the office, create a backup account.

  In addition, for security reasons, enable the administrator account.

  Reinstall Windows 7:

  Using the recovery partition to reinstall Windows 7

  Step 1

  Restart the ThinkCentre and repeatedly press the "F11" key like start the computer to the top.

  Step 2

  Watch a message on reboot telling you press F11 to access the product recovery program. Quickly, press the "F11" key when you see the message. If you do not see the message, you do not have a recovery partition on your hard drive and must instead use recovery discs. Once you enter the recovery mode, either by pressing 'F11' or booting from a recovery disk, the ThinkCentre shows main recovery screen.

  Step 3

  Follow the prompts to choose your recovery options. Use the settings by default unless you want to customize the recovery. You can choose options such as full recovery ',' "Content factory" or "Restore my hard drive to the original state of the plant," according to the particular ThinkCentre model.

  Step 4

  Insert new disks when you are prompted if you restore DVDs.

  Step 5

  Click 'Yes' when prompted to restart the computer. From this point, the recovery process is completely automatic. Your computer restarts several times, and the whole process takes sseveral minutes or more. Once installation is complete, Windows displays the configuration for a new user screen, as if the computer comes out of the box.

  Step 6

  Complete the installation of Windows by entering in your language, regional settings, network settings and the Windows user name. You may also enter your Windows product key, which is on the DVD provided with the system, or on a sticker on the computer.

  --------------------------

  If this does not work, contact technical support

  replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand

  Create an extra account:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Activate the administrator account:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

• State of devices Bluetooth blackBerry 10 they are disabled for the upgrade to 10.2.1.537

  Hello

  We had (including myself) several users in my company who have improved their devices to this latest version of the software.

  Since the upgrade, we can no longer use your Bluetooth devices.  We get the message that Bluetooth has been disabled by your administration.

  Our BB10 devices connect via ActiveSync and we have not any policy with dealing with ActiveSync for Bluetooth.

  That correct us this 'political' that doesn't exist not blocking the use of Bluetooth?

  If we managed to solve our problem by running the following command in powershell

  Game-MobileDeviceMailboxPolicy-Identity: PolicyName - AllowBluetooth: allow

• LR 6 Perpetual License holder (not CC/subscription), why should I connect online for the software?

  LR 6 Perpetual License holder (not CC/subscription), why should I connect online to use the s/o... it has already been activated buy prefer to NOT use this while that connected and/or signed the.

  'Sign In' = 'enable '.

  'Sign Out' = 'Disable' (what say you in fact that if try you it).

  So, as it makes sense to use the software that it must remain enabled, this means that Lightroom needs to stay "connected".

  But... "Signed In" does NOT mean that the system must remain connected to the internet, the only time where a connection is necessary when you actually try to sign, or when you decide to sign. So, having signed, you can wander happily in the great outdoors, with no possibility of the internet, and your version of perpetual license of Lightroom will continue to operate for as long as your computer can run. There is no limit of time and no need to check once in a while.

• Unable to connect get for the wireless. Receive a message requesting a password. I have did not have one, or forgotten. What should I do?

  Problems to make the Wi - Fi connection

  I used to have cricket but passed to Comcast.  It works fine with an attached cable, but have not been able to do wireless.  The Comcast tech try to help but he kept asking for a password to unlock.  I have did not have one, or forgotten.  What should I do?

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• How to disable for the external hard drive restore point in Windows 7

  System Restore performs a restore point for my external hard drive, which I did not need, how to change that?

  Hello

  Click Start, right click on computer and select Properties.

  In the left menu, select the System of Protection.

  In the Settings of Protection section, click on the external drive letter.

  If the external disk drive appear on protection, click on the Configure button.

  Select the option to disable the Protection system for this drive.

  Click Apply/OK.

  This should return all the disk space used for System Restore on this drive.

  Let us know the results.

  Concerning

• Intervals of collection for the IC Agents

  Hi all

  Not sure how many of you are on 5,6 and use the cartridge of the Infrastructure. Does anyone know if it is possible to set different collection interval for different indicators? We are ok to collect measures of performance (CPU/memory/process, etc.) every 5 minutes, but we want to collect EventLog and Services every 1 min, we used to be able to do it with the old cartridge to OS, but with the new cartridge Infra, I couldn't quite understand how.

  Thank you

  Xiaoning

  It is not possible to do so today with a single agent. The HostAgent uses a calendar of unique collection for all the measures that it collects. You might approach creating two agents - a to collect metrics based on the frequency of 5 minutes by default and the other to collect only events and services according to a schedule of 1 minute. I filed an enhancement request to consider separate in a later collection times.

  Message edited by Stuart Hodgins to correct typos.

• Connection Manager for the Office of blackBerry Smartphones

  I hope someone can help me with my Desktop Manager. I can't it connect with my BB "BOLD".

  I downloaded the Desktop Manager 4.7 version (I already got 4.6, but could not get it to recognize the BB) and I downloaded the USB driver software.

  When I connect the BB to the USB I know it connects because Adobe will light up and the photos appear.

  But I can't connect the device in the lower left corner of the Desktop Manager away from the connection of the device (PIN) NONE. Frustrating, it's only once or twice during the 3 months, it is connected, but most of the time does not and will not at all now.

  I also tried Bluetooth.The BB and the pc recognize each other but still no connection to the Desktop Manager.

  I use MS XP

  Thank you

  Binge, it worked for me as well.

  Thank you very much Urumilton for your expertese and persistence and ggergs to travel with me and with the upcoming final turn.