Connection in R12 after Java update problem

Similar Questions

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• Windows 7 cannot connect to internet after software update

  Last week my brother called me stating that he had updated Adobe Reader and it said to reboot. After the restart, his computer was delivered indicating he had no internet access. I went to the wire and took a look at his computer and discovered that, although he said he had access to its local network, he could not access the user interface of the router. We checked cell phones through its wi - fi and Netflix connection on its Blu - ray player. These two worked, if the router is always connected to the internet, even if the computer could not connect. We tried to reset the router to the factory settings, but still could not access it from his computer. Finally, we did a system restore to a checkpoint from the morning before this happened. After the restoration, the internet works again and all the updates without any problem.

  Last night, I received a call from my cousin who, after an update of its AMD graphics drivers, had the same issue with network connectivity to reboot to apply updates. He had already tried to reset his router, which was a different brand/model, but not able to access the user interface even though his computer showed that he had access to the local network. I proposed the restoration of the system, which worked.

  This looks like exactly the same problem despite an update for me different is originally on each computer. None of these updates should affect what anyone with the network settings of the computers, and updates same ran after the restoration had all the problems. Does anyone have a possible explanation for the way in which this issue could occur?

  These PCs have McAfee? McAfee has been updated at the same time that the last batch of Windows 7 & updates updated to Adobe, but McAfee which is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• Failed to open the Console, EM or analytical after Java Update

  Hi guys,.

  I'm not able to open all applications under OBIEE probably after an update of Java that happened 2 days ago.

  The latest version of Java is version 6. update 33

  I tried to restart the services and login pages come once analytical and EM but once I get my ID that the page just trying to load for a long time and then I get an error message saying "the connection has expired.

  I checked the bi_server 1 and the Server Admin logs and this is what I see later.

  The BI server log

  # < 27 May 2014 19:03:27 CEST > < error > < WebLogicServer > < HPLXBI1 > < bi_server1 > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 93e5582bcdef7222:-4889a98b:1463e47f9d2:-8000-0000000000000fe6 > < 1401210207886 > < BEA-000337 > < ExecuteThread [STUCK]: '9' for queue: "weblogic.kernel.Default (self-adjusting)" has been occupied for the second "676" working on demand "Workmanager. : by default, Version: 0, scheduled = true, Started = true, start time: 676272 ms

  [

  Server Admin

  # < 27 May 2014 12:58:30 CEST > < opinion > < Diagnostics > < HPLXBI1 > < AdminServer > < [pending] ExecuteThread: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 93e5582bcdef7222:-32b7aa02:1463e46e7e9:-8000-000000000000007e > < 1401209910432 > < BEA-320068 > < Watch "UncheckedException" with severity "Notice" on the server "AdminServer" triggered to May 27 2014 12:58:30 CEST. Details of the notification:

  WatchRuleType: Journal

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))

  [WatchData: DATE = may 27, 2014 12:58:30 CEST SERVER = AdminServer MESSAGE = [ServletContext@177655599[app:em module: / em path: / em spec-version: 2.5]] Servlet failed with Exception

  java.lang.IllegalStateException: can't send a response which is already committed

  at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:122)

  at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)

  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)

  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)

  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)

  at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)

  to org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$ OverrideDispatch.dispatch (FacesContextFactoryImpl.java:267)

  at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)

  at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)

  at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)

  at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)

  at oracle.sysman.emSDK.adfext.ctlr.EMViewHandlerImpl.renderView(EMViewHandlerImpl.java:157)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:164)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.help.web.rich.OHWFilter.doFilter (unknown Source)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:105)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Subsystem = HTTP USERID < WLS Kernel > = SEVERITY = error THREAD = ExecuteThread [ASSET]: '2' for the queue: MSGID 'weblogic.kernel.Default (self-adjusting)' = BEA - 101020 MACHINE = HPLXBI1 TXID = the CONTEXTID = 93e5582bcdef7222:-32b7aa02:1463e46e7e9: - 8000-000000000000007 c TIMESTAMP = 1401209910430

  WatchAlarmType: AutomaticReset

  WatchAlarmResetPeriod: 30000

  >

  Please help me with this...

  stop and wait a few minutes, then start bi services, should take care of it

• Java update problem

  update of Java while trying to install a java update the followin message problem, cannot start the installer from the java (TM) update the requested operation requires a rise.

  Hi all

  You can see this information on Java user account control.
  http://www.Java.com/en/download/FAQ/UAC.XML

  But to answer some questions, even if logged in with an administrator account, Windows Vista and Windows 7 require a high privilege to install some things. It is the function of (UAC) user account control. Usually you would right click on the .exe for example setup.exe or Setup.msi file. If you're in a command prompt, then right click on cmd.exe and select "Run as administrator.".

  You can temporarily disable UAC and install Java. Re-enable UAC, then see if it helps to get installed it.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Java update problem. I have problems with the update of java on my microsoft vista,

  I had no problems before with the java update, but now, I have tried several times to install java 7 update 21 on my microsoft vista. This is a big problem that I can't use my netbank and other important sites.

  What should do?

  I had no problems before with the java update, but now, I have tried several times to install java 7 update 21 on my microsoft vista. This is a big problem that I can't use my netbank and other important sites.

  What should do?

  ======================================
  Something to try... no guarantee it will work...

  (1) create a System Restore Point.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (2) uninstall all instances of JAVA.

  How to uninstall Java on my Windows computer?
  http://www.Java.com/en/download/uninstall.jsp

  (3) download the full Version of JAVA 7 update 21 on your desktop.

  Here is the link for downloads.

  http://www.Java.com/en/download/manual.jsp
  (remember to read the instructions)

  Select the second choice under Windows (offline)
  This will download the (jre-7u21-windows - i586.exe)
  file on your hard drive and you can install from there.

  (4) on the left, double-click on the downloaded file and if all goes well
  It will install successfully.

  Good luck...

• Magic mouse after Sierra update problems

  Hello

  Are there other people who have problems with their magic mouse in Photoshop and Illustrator after the update of the Sierra?

  It seems that my mouse has become more sensitive waaaayy.

  It makes it nearly impossible to zoom with precision and to move objects while now shift.

  
  This was not the case with El Capitan.

  I checked my settings but nothing weird here.

  Just installed the latest Macos update and Adobe apps are finally working properly!

• Problem of DH handshake with the web service using ColdFusion 7 and 8 after java update 8

  ColdFusion 7 and 8 are provided with a variant of JRE1.6.

  I have a script that has consumed a web service for years with success.  Last week, the web service provider updated their version of Apache and Java on the server java 1.8 (or java-8).

  I could no longer consume the web service once the web service provider updated to Apache and Java and would be the following error DH keypair every time that I try to consume the service:

  -----------------

  AxisFault

  faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException

  faultSubcode:

  faultString: javax.net.ssl.SSLException: java.lang.RuntimeException: could not generate keypairs DH

  faultActor:

  faultNode:

  faultDetail:

  {}http://xml.apache.org/axis/} stackTrace:javax .net .ssl .SSLException: java.lang.RuntimeException: could not generate keypairs DH

  at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:190)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1554)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1537)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1130)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)

  at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)

  to org.apache.axis.transport.http.HTTPSender.getSocket (HTT... ''

  -----------------

  I asked the service provider web, why it would stop working and how we can solve this problem.  They suggested that upgrade to the latest version of Java on my server running ColdFusion.  I did some research and found the problem to be with the amount of memory allocated to the variable containing the encryption key.

  The big problem is when I tried to update java on this particular server (Windows Server 2003), the installation has returned a messaged stating that he could not run on the older operating system and I need to update my OS to install java.

  Does anyone have a workaround in ColdFusion 7 or 8 that you can establish the DH handshake using Java 1.6 on your local server while consuming a web service on a server using Java 1.8?

  Hi, frank000000,

  I know that we had a serious problem with any Java 7 after update 25.  They are off a lot of network permissions and other things, for safety, that used to be available in versions prior to the update 25.  But it's while we were in CF Server 9.

  Since we switched to CF Server 10 (making sure that we got the CF Installer provided with Java 8), we had very few issues related to Java.

  It seems strange to me that the upgrade to 1.8 host while your server is 1.6 would cause problems.  It could very well be something else.  I would like to ask the host for documentation describing exactly how/why their 1.8 may cause interference with your 1.6.

  HTH,

  ^_^

• Satellite Pro C50-A-154 - battery after automatic update problems

  Hello world!

  First of all, I must apologize for my bad English, if it is not as good as be... after that, I could start to tell you all what happened to me in the last few weeks...

  I have an a C50-A-154 Toshiba Satellite Pro and I use it for stuff like watching youtube videos, listening to music, and do this kind of thing than a normal user.

  A few weeks ago a Toshiba Tempro Alert remember that there are software updates avaliables to download for my laptop, so I installed them, I normally unplug my battery when I have the power cord plugged in, so I didn't realize after a week after that my battery was not recognized as it should be for my toshiba.

  Initially, windows said that it is fully charged and no need to continue to load, so I unplugged the power cord and the laptop shutted down (with battery connected and therefore be charged to 100%).

  When I plugged it again the power supply cable, windows said that the battery was empty and told them, hip but not load...

  At the same time, a new toshiba update was released, this time was for the bios, if I have that it is probabbly fix the problem with the battery, so I updated the BIOS and windows says that the battery was full charged... I couldn't believe...!

  But the system always goes down when yo unplugg the AC cord, and now battery said once again that it is empty...

  Yesterday was a new update for the Bios, so I give another chance, but nothing has changed... I can't use the battery, and I have no warranty, so I don't know what to do...

  I read a lot of posts on battery of problems lately, in the forums of europe and US forums... maybe it's a software problem? Maybe toshiba boys don't have any idea about this problem?

  Thanks for your replies!

  Ruckmess

  Hello

  I think it might be a software related issue.
  In Device Manager, you will find the battery input compatible Micorsoft ACPI method. It belongs to the Advanced Configuration and Power Interface.

  I recommend you to uninstall the three topics that you might find in the battery area.

  Reboot the laptop. After restarting again, the system should install all devices removed once more.
  Usually, this should help to unravel the question in the case of its just system problem

• Cannot connect to internet after Windows updates

  When I double click on broadband connection, it won't open after installing windows update

  * original title - whenever I have install windows update install but after pc restart I cannot connect to internet__b'coz when I double band click on the connection, it will not open__due for this I have to restore all the updates__please help *.

  Hello

  1. what operating system do you use?

  2 you get an error message while trying to access the internet?

  3 what updates did you install?

  1. you try to install an update in both clean start state (restart the computer after installing each update) and check the update is causing this issue and send the same return.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps instep 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  For Windows XP:http://support.microsoft.com/kb/310353

  Note: To restore your computer to a Normal startup mode, follow these steps:

  a. click on start in the box start the search.

  b. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.

  d. When you are prompted, click on restart.

  Install Windows updates in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  2 please check the items below to solve the problems of internet connectivity.

  Why can't I connect to the Internet?
  Using the troubleshooter from network in Windows 7
  Use Network Troubleshooter event logs to solve network problems

  In Windows network connection issues

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot connect to internet after Windows update. With the help of windows 7 on a brand new computer

  Just got a new laptop last week... The internet worked right out of the box... Now last night I let windows do a big update, and now my internet does not work...  It says something about "connects to the DNS servers.

  So I did a system restore to an earlier time, and the internet works fine...

  which ____ should I do?

  Hi 31aboy,
   
  Welcome to the Microsoft Answers community.
   
  Try to install the update to windows in clean boot mode.

  To enter the mode of clean boot on your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. now run windows update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
   
  If you are facing the same problem even after installing the update in clean boot mode, then check the update in windows update history and send me the update name.
   
  Steps to view the windows update history:
   
  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• OfficeJet 8600 (firmware CLP1CN1232AR) cannot connect to WiFi after firmware update

  My printer recently auto-mis updated my HP Officejet 8600 it is firmware CLP1CN1232AR and after that, it is no longer able to connect to my router. I can connect to my old router R6300 with her, but not my new WNDR4700. Newspapers say he is rejected for wrong security. I can connect to the R6300 and then give him the exact specifications (WPA2 AES), but it still does not connect. I don't know why the WNDR4700 is no longer, but something has changed in the last firmware that make it miserable. Is it possible to downgrade the firmware? There is another difficulty to operate? Other people have trouble with the new firmware?

  Posted my problem on another forum, thinking the new laptop caused the problem

  Resolution is the same: restart the router!  So simple, but who wants to go up the road to the ' net?

  Router is a cisco Linksys e1000.  Apparently an HP upgrade was nestled among these 25 MS Windows downloaded when I got on the road.

  Thank you and Bravo!

• Cannot connect to internet after daily updates of windows

  I have windows vista Home premium and after installation of updates every day I can not connect to my internet, but if I go back and uninstall updates, I restart and im connect, any thoughts on what to do

  You have Internet Explorer 8 installed.
  Who stopped some people's Internet connection.

  Uninstall updates > change your settings for updates > download updates one once.
  I explained below:

  . Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot connect to internet after auto update under Vista.

  Original title: System shows the connection, but cannot connect

  After an automatic update in Vista in mid-August I can no longer connect to the internet.  My system tray shows that I am connected but I can't.  I'm on a DSL wireless connection with a desktop computer (one does not) and a laptop with XP that always works very well.  I re - configure the modem, uninstalled, and reinstalled the wireless card, has run an anti-virus in safemode, uninstalled the Qwest connection network and re-installed AND uninstalled the update to Vista.  I even tried the system restore to an earlier time.  Nothing.  Internet diagnosis says that it cannot solve the problem.  I have read other forums on the UN-checing proxy settings but mine have not been verified.  I re-set my settings IE8 by default.  Uninstall protection against viruses... What did I miss?

  Hi dozerman5676,

  -You receive an error message/code when you try to connect to the internet?

  Follow the steps below:

  Method 1:

  Access the link below and follow the troubleshooting steps mentioned in the article for a possible solution:

  The problems of Internet connection

  Method 2: Reset Internet Protocol (TCP/IP)

   

  To resolve this issue automatically, click the fix this problem link. Then click run in the file download dialog box and follow the steps.

  See How to reset the Internet Protocol (TCP/IP)

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]