Magic mouse after Sierra update problems

Similar Questions

• Pavllion dv7: freezing of the mouse after Windows update 10

  After installing Wiindows 10, my pointer or mouse freezes or stops for a few seconds before it can be committed. I read a post on the HP forums who suggested to install the updated driver. My computer preparing to receive automatic updates and States that there is no new update to install. I have seen and tried several suggestions on the internet, but nothing has worked to resolve this issue. I don't know why it was necessary to upgrade to 10 Windows when Windows 7 has been working very well. For my use, this problem is almost dibilitating. Can anyone suggest something else that could solve this problem?

  Hello

  Can you post back with the following details.

  1. the complete model number and your notebook dv7 series Nr - you can usually get this by holding down the fn key and pressing ESC, or see here for a guide to the location of such information.

  2. the pointer seems to freeze at random, or after a specific action (ie using the keyboard)?

  Kind regards

  DP - K

• Impossible to disable the mouse after installing updates,

  I use a usb mouse and before I could disables the Tablet thing that my laptop has integrated, now I can still use my usb mouse but I hell cant the key so whenever my hand hit my pointer strays. Help, please! I have a Toshiba Satellite, I have Windows Vista IE 7, do not know what other info someone needs just installed some updates for windows and installed Silverlight. Thanks in advance,
  Stephanie

  Hello Sexystephm,

  Thanks for posting on the Community Forums of Microsoft Vista.

  It should probably be shortened on your laptop keyboard to disable the touchpad (FN + F9). Also check in Control Panel, you should have an option to disable the touchpad of your laptop.

  However, if this has happened after I installed updates on your computer, you can try to restore the computer to an earlier date when you have been disable the touchpad.

  To perform a system restore, follow these steps:
  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. in the System Restore dialog box, click on choose another restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.
   
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Also, you can check with the computer manufacturer if they have additional settings to change or updated drivers to install.

  Link to contact toshiba support: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Product%20Support&sn=false

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro C50-A-154 - battery after automatic update problems

  Hello world!

  First of all, I must apologize for my bad English, if it is not as good as be... after that, I could start to tell you all what happened to me in the last few weeks...

  I have an a C50-A-154 Toshiba Satellite Pro and I use it for stuff like watching youtube videos, listening to music, and do this kind of thing than a normal user.

  A few weeks ago a Toshiba Tempro Alert remember that there are software updates avaliables to download for my laptop, so I installed them, I normally unplug my battery when I have the power cord plugged in, so I didn't realize after a week after that my battery was not recognized as it should be for my toshiba.

  Initially, windows said that it is fully charged and no need to continue to load, so I unplugged the power cord and the laptop shutted down (with battery connected and therefore be charged to 100%).

  When I plugged it again the power supply cable, windows said that the battery was empty and told them, hip but not load...

  At the same time, a new toshiba update was released, this time was for the bios, if I have that it is probabbly fix the problem with the battery, so I updated the BIOS and windows says that the battery was full charged... I couldn't believe...!

  But the system always goes down when yo unplugg the AC cord, and now battery said once again that it is empty...

  Yesterday was a new update for the Bios, so I give another chance, but nothing has changed... I can't use the battery, and I have no warranty, so I don't know what to do...

  I read a lot of posts on battery of problems lately, in the forums of europe and US forums... maybe it's a software problem? Maybe toshiba boys don't have any idea about this problem?

  Thanks for your replies!

  Ruckmess

  Hello

  I think it might be a software related issue.
  In Device Manager, you will find the battery input compatible Micorsoft ACPI method. It belongs to the Advanced Configuration and Power Interface.

  I recommend you to uninstall the three topics that you might find in the battery area.

  Reboot the laptop. After restarting again, the system should install all devices removed once more.
  Usually, this should help to unravel the question in the case of its just system problem

• Program after the update problems

  Hello, I had a hard time with updates on 7.  The last challenge has been with outlook do not open, even with the system restore.

  I used it to fix outlook, type "run" command > outlook.exe/resetnavpane

  I tried similar things for the desktop gadget for the time that it did not work.

  I have the clock and the calendar, they came back, but the weather went and now I can't open, even with the admin, the Google desktop gadgets Gallery.

  It was after the last automatic update a few days ago.

  Restore does not fix it.

  I need a fix, as I had for outlook.  But I forgot where I found it, I may have searched online and came across it.

  Who knows what other programs do not work I have just not used!

  Why are the updates mess up my system?

  7 came on this machine.  It is a mid-range Acer.

  OK, hope that someone has some wisdom.

  Thank you!!!

  * Title *.
  Updates programs, fixed bug with outlook, now a bug with Google desktop gadgets Gallery and who knows what other programs I tried not to spoil.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. If of Spybot's Tea Timer is enabled, please disable it and leave this option disabled until we're done here. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. now to reset IE8 by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  6. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Ignore the section to APPLY to;] KB971058 access via IE8 32 bit only. Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  7. a last reboot & test. If the problem persists, see if disablingand then enabling the Windows Firewall Comodo Firewall resolves the behavior.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Start computer after the update problem

  I just have an automatic update from Microsoft to settle on my computer and automatically restart to complete the process. Everything seemed fine with the installation to reach 100%, as it has been taken out of windows. However, my computer now not turn back at all! I've had no problem with the computer before.

  The computer is an Evesham axis R6 XT and I am running Vista Home Premium. Is it possible that this update caused a conflict with my material that could prevent the computer from starting completely or is it just a complete cooincidence that the computer died during a restart of the update?

  The computer has power as when I try and turn on the computer, it shows a blue light continuous flashing on the front (not the HD light) but it feeds any upward? Suggestions regarding the problem would be welcome.

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also, once you get in Vista:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with services of automatic startup after Windows Update problem

  These are probably related to many things I tried trying to solve the problem of Windows Update - until I found the answer to Fix It.  That fixed my Windows Update, but now I have these problems.

  I tried to run the bat file that Sohail suggested in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/41f1d01e-e787-479b-83de-c66f40a23a37/
  He ran with errors, so I suspect he undid some things and then they don't get put back.

  Those that I know I need is:
  Windows Audio
  DHCP client

  These two begin very well once the system is in place, but I have to do it manually.  They still claim to be automatic when I view in the Services management tool.

  I also noticed that the following services are set to automatic but have not started either.  Is this a problem?
  Task Scheduler
  TCP/IP Net BIOS Helper
  Windows event log
  TPM Base Services

  So, how do you restart automatically?

  Problem posted in another thread to improved Performance.  Long story short - a repair settled with Vista DVD.   He fixed the problem of services, but the problem of Windows Update is back.

• Printing after DC update problem

  DC from Adobe updated yesterday 14/05/16, since then when I try to print from PDFs from DC it will open the printer options I chose what I click on print and the folder where I save my PDF files pop and asks me to save the PDF instead of printing the PDF file . PLEASE Help I do a lot of printing of PDF files.

  Thanks in advance for your time and help in advance.

  I solved my problem. The printer itself kept updated Adobe PDF format, instead of the default printer.

• Connection in R12 after Java update problem

  Hi all

  After upgarding Java on the Application Server for the JDK7, I am not able to go beyond the opening screen of application session oracle in R12 using the web browser IE-8, received with error, below, while I am able to work as usual in the browser web Firefox, also established that some of them are able to access the applications , including forms that are of the smillar system configuration than mine, as OS, version of IE.

  ------------------------

  < PRE > Oracle error 1403: java.sql.SQLException: ORA-01403: no data available ORA-06512: line 1 has been detected in FND_SESSION_MANAGEMENT. CHECK_SESSION. Your session is no longer valid. < / PRE >

  Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. For more details, please see the application log.

  The problem here, I mentioned seems to be the specific system, if that is so I have to make any changes to my system to address this problem? Please suggest.

  Thank you

  Moore

  @Hussein:

  I can login and registration after the implementation of this change.

  Uncheck the option "activate the next generation Java plugin" in the Java Control Panel

  Thank you

• Administrator after windows update problems 8

  I did an update on Windows 8, but now even if I am logged on as administrator, it seems that I don't have the admin rights.  Cannot access the C: drive, can not install applications, cannot run recovery.  Help, please.  Thank you!

  Try right-clicking on C:\ and select Properties, then security upstairs.
  Select Advanced near the bottom.
  Upward, click EDIT next to the owner.
  Select Advanced
  Select search now
  Scroll through the list, and then select your username.

  Once this done, select your user name and select EDIT, and give you all the permissions.

• After the update of Sierra: not to Disable Trackpad with Magic Mouse connected

  Hello

  After that I updated to macOS Sierra on my MacBook Pro the Trackpad is not disable mouse connected with Magic.

  Feature: MacBook Pro retina 15 inches (end of 2014) on macOS Sierra.

  Since the update, I noticed that my stays compatible with my Magic Mouse connected after built-in trackpad window connection.

  In system-> accessibility-> mouse and Trackpad preferences, I have not "ignore the built-in trackpad when mouse or trackpad wireless is present". If I switch it off and on again once again, the parameter will be.

  However, once I lock the device (user name right-> connection... window) and reconnect, the trackpad works. You must pass the parameter each time.

  Is this a bug of Mac OS Sierra (can't find anything) or am I missing something? I am aware that the trackpad is reactivated at the login window, but before it will deactivate after logging in.

  I don't use Magic Mouse, but I have USB Wired mouse and I have the same problem since installing Sierra.

  I have the box ticked, but I must go and clear the check box and then save.

  I have to use a mouse all the time because my trackpad goes haywire and I wasn't able to find a solution for this. It moves its own and open stuff on its own.

• problems with keyboard and mouse across multiple pc / laptops after critical update

  After updating all my logitech wireless keyboards and mouse gaming 3 PCs and a laptop all running win 7 64 bit family premium stopped working well functioned up until today update tried the logitech forum, support and no help. Also my phone has not stopped ringing all night people I game with and built systems for so it looks like this isn't an isolated problem. It seems that the update has dropped to about 19-20:00 hours, 16/05/13 can help you I have tried everything I know (im a former engineer MCSE) so I went through all the likely problems and troubleshooting with no joy can you please help (before restore points bearing the update seems to work until windows re updated and then

  Thank you very much

  Anthony Richardson

  Hi Anthony,.

  1. What is the brand and model of the mouse?
  2. the updates from Microsoft are installed recently?

  Method 1: I suggest that you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 2: I suggest restoring the system, then download and install the updates from the Download Center.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Keep us updated on the status of the issue.

• Magic of the Sierra of the mouse scroll / Zoom question

  After I installed Sierra, my Magic Mouse begins to act crazy in After Effects (CC 2015.3) and has not managed to scroll or zoom efficiently. He climbs 50% to 1600% with a very subtle movement and it is impossible to live and work with. Someone please help!

  Apple macOS 10.12.1 released this week. She seems to correct problems with the sensitivity of scrolling with a touchscreen device from Apple.

  I just installed the update and tested to scroll to zoom in the panels Composition, layer, and footage with a mouse Apple Magic Mouse, and the behavior seems to be the same as on 10.11.6.

  In addition, as I mentioned above, we studied the inertia scrolling disabled when you zoom in the spectator in After Effects panels, and I am happy to say that in the next version of After Effects, this will be the case. This change makes the behavior of predictable zoom with Apple touch devices and eliminates the problem where accidental blows or too fast-movies-des fingers make the Panel Viewer completely zoom in or out. (Accidental shots or shortcuts, if they occur, always will zoom to the Viewer. "But now the amount of zoom is based on the distance by moving your finger as a mouse with a physical scroll wheel).

• Update of the bad experience of typing after Sierra

  After the update of the Sierra the typing experience is sub par.  He lags on the screen and sometimes the AutoCorrect intervenes before you finish typing, "correcting" the word after that I typed it correctly.  It sorts of predicted what I'm typing and corrects until I finished typing so that the end result is something like "unbelievablele" or "correcteded."

  Anyone with the same problem?

  You can disable the automatic correction of spelling and grammar until you are done typing and then allow him to do these things on your work completed. What you have described is Pages doing all this while you type. On the Edit menu.

  Uncheck all the features in the submenu, as I've shown here:

  

  When you are finished typing, then display spelling and grammar.