I have Satellite L40-139 and need to restore the factory settings
The problem is, that the recovery of the program disk does not open automatically and even hold down F8 at the beginning upward does not work as I get another page to the screen showing the details of American Megatrends and no option to return to factory setings.
Any ideas how I can get around this? This page has only been for about a week.
Thank you
I don't know what you're doing exactly, because it automatically start confuses me, and I do not understand you exactly.
Before discussing the installation of recovery, I would like to know what you are doing exactly.
You try to start the installation of the OS on the procedure of recovery DVD or disk HARD recovery using F8 and disturbances of my computer?
Tags: Toshiba
Similar Questions
-
Satellite L40-139 and Midi interface
I have Satellite L40-139, which includes a SoundMax sound card (somewhere inside) and I would like to be able to use it as the basis for a music recording Midi put in place, but I can't get the computer to recognize the Phonic Midi to USB interface, I.
The map SoundMax accepts data Midi and how can I do to make him recognize?
Hello
I put t know what you want to do exactly.
Depending on your message that you try to connect an external 3rd device to the USB port. Am I wrong?
How a sound chip should recognize this device? I was a little confused mHowever, I think that you should first check if this 3rd party device has been properly recognized and installed on the laptop. It is an essential condition if you want to use.
PS; If you use the Vista operating system, you need to check if this 3rd party device supports Vista too!
-
Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card
I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
In the device manager says code 10 DEVICE can NOT START.Help, please!
Thank you!
Hello
If you read here:
http://support.Microsoft.com/kb/943104
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.Welcome them
-
Hello everyone, I have a toshiba satellite laptop a135 I need to restore the original configuration. I tried to make the outfit out of service 0 while turning on the pc, but that only takes me to the windows start page. Anyone know a fix for back to the setting rstore factory without cd or media? the cd/dvd drive does not work and the system restore is not working or the other. Help, please?
Bill, your info was very useful thank you for the help that I could download the correct files and restore my laptop back to the original state. This has solved all the questions I had some and also allowed me to make a bootable file to be used from the cd player and flash drive, once again, thank you much.
-
I have an acer laptop and need to brighten the screen... How?
I have a laptop acer and need to brighten the screen > HOW?
There are two options:
- It seems that you are using Windows XP. Right-click on your desktop, click Properties, and then select the settings tab and click Advanced. There should be a tab named after that card manufacturer (Nvidia, ATI, etc.). This tab should have a button that opens a panel of controls specific to the manufacturer, which allows you to make adjustments to the video card, including the color/brightness.
- Laptops usually have a touch of "function" (Fn), you can stick it together with other keys to adjust some of the properties of your laptop. These other keys are the regular with symbols keyboard or keys drawings next to them, usually in a different color. Looking for a symbol that resembles the brightness, like a Sun. When you find it, press and hold down the Fn key, then click on in the special key that you just found.
-
WARNING: Your DNS settings have been changed. Accept changes or restore the original settings?
This is the error message that appears every 3 minutes. If I click on accept and then I can't get back on the internet unless I reboot. If I accept the restoration, so I'm OK for the other 3 minutes. Why is that happening and how can I solve the problem? (The computer has always been setup for obtain an IP and DNS address automatically. I have checked the properties and that has not changed).
Try this:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
Satellite L40 - 139 - I want to upgrade the RAM
Hello
My laptop is Toshiba Satellite L40 - 139 PSL40E model, operating system Windows XP SP3, 1 024 DDR2 RAM (667 MHz) (512 + 512).I want to increase the RAM memory using 2048 DDR2 RAM (1024 + 1024).
Laptop manual can not find if support * _dual-channel memory_ *, which requires a dual-channel-capable motherboard. Theoretically, this technology double data rate of the memory.
Someone has the manual for this laptop motheboard, or may indicate the site for download?Apologies for my bad English.
Thank you.Hello!
Satellite L40-139 can be upgraded to 2 GB of RAM. You can buy two modules with 1 GB of capacity with the specifications of DDR2 at 667 MHz.
If you use two modules, they run in dual channel mode.The manual of the motherboard or repair for Toshiba laptops cannot be downloaded. They are only available if ASP.
Good bye
-
I have Vista o/s and need to understand the steps to fix the runtime error 70
I try to load an iPhrase Italian Berlitz CD on my computer for use on my iPOD. I have a Vista OS and I get an error message "Run time error 70". Everything I find on the internet does not provide for Vista o/s display resolution.
Any ideas how to fix?
Hello me12fly,
Runtime Error 70 means generally that there is a problem with permissions. Click on the article below and see if that helps.
KB Article ID: 313222 -how to restore the security settings the default settings?
You can use the automatic FIXIT button or you can make the changes manually. I would like to do a system restore first point before making changes so that you can restore it back if necessary.If this does not help, you can contact support Berlitz or look on their website.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Hi everyone, I hope that there is someone out there who can help me. I have an Aspire 571 V3 that I picked up at the factory settings, or so I thought. After all the files had been cleared and the system recovered it restarted and displayed a black screen with 'the installation program starts services' and a flashing light below are progressing. It has been that way for hours eight (8). is this normal or should I worry? In its current form, I have no control on the machine on the touch pad or mouse. I have provided with Currys computer recovery discs, but they are not to be recognized.
Kalimera
8 hours is a little too, you can try to stop it and repair the resumption of the process.
do a long press on the power button to stop it
at the next startup, press Alt + F10, and then check if you are able to start the Acer recovery process
If it isn't
Enter the BIOS by pressing F2 at startup
enable F12 boot menu if not already enabled
Save and exit
put your first recovery disk on your laptop
stop your laptop making the long press the power button / stop
at the next startup, press F12, and then on the startup list select DVD/CD player
-
Satellite L40 - 18W (PSL4CE) - need to press the button ON / OFF utility
I would like to install the driver "TOUCH PAD (ON / OFF)" UTILITY ".
for TOSHIBA SATELLITE L40 - 18W
MODEL: PSL4CEPlease help where to install this driver and how to operate the function Fn + F9
concerning
Everything about Windows XP Home edition, drivers, tools and install the utility, you can find HERE.
I n t have this model of laptop and can't test the functionality of FN + F9.
If you have installed the driver for the touchpad right and FN + F9 does not work, you can disable touchpad in the mouse properties. -
isn't tcauto.exe incurred has a problem and needs to close to average. It happened while I was trying to install the H@r Block tax software
- Insert the software CD into the CD drive.
- Right click on the desktop icon and select Explorer.
- Click the CD-ROM drive.
- Choose the file HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe (where XX is the year of the product), and then choose copy.
The name of the file should State + or + E-file in the name. - Close Windows Explorer.
- Right click on the desktop and then click Paste.
- Double-click the HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe file (where XX is the year of the product) file.
- Follow the instructions in configuration of installation
-
Satellite A500 - how to restore the factory settings after upgrading to Windows 7?
Hello
Since I have updated my OS to Windows 7, I have a few problems. In general, I noticed my laptop would ' t work as well as it was running Vista 32 bit. Especially with games online (souch as counter strike 1.6).
The problem is that I have for my backup DVD because my DVD burner work not at all :/ Now I just wonder how could I return for win Vista without the DVD. Is it still possible? I also do not have small jets CD I bought my laptop. So, what should I do?
null
Hi stab them.
I think that I n the new good t for you: restore factory settings without Toshiba recovery disc isn t possible in your case! :(
First of all I think it's normal to s no recovery disk is delivered with the laptop as you will need to create them yourself using the Toshiba recovery disc creator. That is why it s recommended using high quality as Verbatim DVD-R media.
I think that the only option to recover to factory settings is to order a new Toshiba recovery disc.
https://backupmedia.Toshiba.EU/landing.aspxI put t understand why you didn't create this disk, because after the first boot, if you shut down the computer area, you get the following message:
+ Important INFORMATION +.+ your system is equipped with a hard drive recovery system. If you need repair.
+ your computer in the restaurant to original factory State, you can do it directly.
+ HDD (press F8 when you start your computer, choose "Repair your computer" +)
+ and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.+ Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
+ Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
+ Gets severely damaged. -
Your DNS settings have been changed. Accept changes or restore the original settings?
After you have installed Spyhunter, I get this message every time I start up. If I don't "accept", I lose the internet connection. Is this just a nuisance, or some malicious software work?
Hello
Please refer to the suggestions of Vidyaranjan A V responded on 18 January 2012
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
If you still have questions, I would have you uninstall Spyhunter and check if the problem persists.
Uninstall or change a program
http://Windows.Microsoft.com/en-CA/Windows/uninstall-change-program#uninstall-change-program=Windows-7Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
-
Satellite L40-139 and WXP - how an audio device to work?
I recently reinstalled Windows XP on my laptop and after having managed to download the drivers for my wifi video ect I arrived to the sound I have downloaded the driver but it still does not that my laptop doesn't show any recorded audio device. How can I make them work?
That's what I see when I got to his http://i47.tinypic.com/25u04ds.jpg
Hello
On Windows XP, you must install the two updates for your sound card:
AUDIO Patch1: Http://support.microsoft.com/kb/835221 KB835221
AUDIO 2 Patch: KB888111 http://support.microsoft.com/kb/888111Alternative you can install SP3 because it contains these patches!
But before installing, remove the current sound driver. The driver must be installed after Windows updates.
-
Adobe support, you can tell me how to get replacement discs?
Hi Pete,.
See this doc: https://helpx.adobe.com/x-productkb/policy-pricing/obtain-replacement-cds-dvds-manuals.htm l
I hope that helps!
Thank you
Kevin
Maybe you are looking for
-
Satellite A200-1 g - Win8 need display driver
Help me please to find the video driver for my laptop Satellite A200-1 g for Windows 8.All my available screen resolution is 1024 x 768. How can I solve this problem?
-
How do you define a date formula in a column?
I write the dates of publication for books in my numbers and want to format a column to a single date. This way I can write the date in some way and it would be to convert to the date I selected. For example: the format would, however, on September 1
-
Webcam has stopped working on my Satellite P50-B-103
Hello everyone.I bought a brand new toshiba satellite P50-B-103 in the begginning, the webcam worked fine, a few weeks ago, but after some time, he said that "no webcam device were found" and suchs. Theres no information on a webcam in Device Manager
-
disarm read only of invalid property - all mean read only files
Windows Vista Home premium, I reorganized some folders between 2 users (mother and daughter) and now all files and folders appear to be read-only and I can save is no longer with applications Ms. Also when I right click to change permissions... it se
-
the so-called important updates are installed but can not configure my laptop is unusable for the better part of an hour, what can I do?