Connection map Sound Out of 1 PC and read by 2 PC

Similar Questions

• "The specified network folder is currently mapped using a different user name and password", trying to connect to a remote drive.

  Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.

  I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

  In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.

  The message is bad because:

  1. the specified network (action2 in my example) folder is not mapped at all, and

  2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.

  The error message is wrong in two respects.

  This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials.  It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.

  David Walker

• When connecting headphones, sound plays simultaneously headphones and speakers.

  Original title: sound problem

  When I plug my headphones on my laptop the sould goes through them and only them. Then, after about 20 minutes (and this happens every time) sound starts coming out the speakers and headphones at the same time. When I go to playback devices is no helmet, right speakers (currently enabled). How can I get sound only the helmet?

  Hi MichaelB22,

  1. were you able to use the headset before without any problem?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  If you connect the headphones to the front taking, then try to plug on the rear Plug and check if it helps.

  You can also try using a different helmet and check for the issue.

  For more information, see the article:

  Connect one microphone, music player or other audio device to your computer

  Method 2:

  You can try disabling the speakers and check if it helps.

  a. click Start and Control Panel.

  b. click hardware and sound , then sound.

  c. on the Read tab, check the speaker settings.

  d. right-click on the speaker and select disable.

  e. click apply and then click ok.

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• I filled out an online form and I try to send it to the organization. When I say submit, it tries to connect to queue: / / / C/users/Gail/Downloads and not in the site of organizations

  I filled out an online form and I try to send it to the organization. When I say submit, it tries to connect to File: / / / C/users/Gail/Downloads and not in the site of organizations

  There is nothing you can do about it. Report the problem to the organization. They should fix it and send you a new version of the PDF file.

• Bowers & Wilkins T7 Bluetooth speaker connected, no sound

  Connects to the speaker, but will not make a sound. It isn't muted in the sound preferences and it won't work for any sound, not iTunes, amazon etc... I have sound from all of these places if I disconnect and use the laptop speakers. Can I use the speaker with other devices, such as my iPhone.

  My macbook pro, retina, 15 "mid 2015 Yosemite 10.10.5 running

  Hi Larisa,.

  Sorry to hear that you are having problems with the T7, I hope that we can help you solve this problem!

  We have not heard of this problem before, but it does not sound as if there is a setting on the Mac preventing the audio to be heard (that you've properly read audio from your iPhone to T7).

  Do you have other Bluetooth speakers or headphones available to test with? It will be interesting to know if others connect and read audio data from your Macbook, because this will help you isolate the issue either with your Mac or the T7.

  Kind regards

  Bowers & Wilkins Support

• I updated firefox and you have a question, if I allowed firefox to use my internet connection, I clicked on No - by mistake - and now firefox is locked, it can not use it at all.

  I got a message that he did not have an update for firefox. When the update has been done, I have a question if I would allow firefox to use my internet connection. By mistake I clicked No, and which showed that Firefox is now locked. I can't go out on the internet at all with her. When I write in links or try to write words for the search nothing happens.
  Tried to download firefox and reinstall but it is still blocked.
  I use internet explorer, so the problem is not in the Internet.
  How do I unlock Firefox so I can use it again?

  Your firewall block access Firefox, read here for more information on how to enable the connection again depending on your firewall:

  https://support.Mozilla.com/en-us/KB/firewalls

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Just to have it... went to a walk (80 degrees outside) and pulled my phone out of my pocket and he told me it was cool (with yellow triangle).

  Just to have it... went to a walk (80 degrees outside) and pulled my phone out of my pocket and he told me it was cool (with yellow triangle). And then began to show french language on the slider to unlock...

  Hey Najeeb1987,

  Welcome to Apple Support communities.

  It sounds like your concerned with a question that has occurred with your iPhone 5s that caused the temperature warning screen to appear on the device. The article below provides much information about acceptable operating temperatures and the temperature warning screen that should help you to solve the problem.

  Keep the iPhone, iPad and iPod touch in acceptable operating temperatures - Apple Support

  Ciao.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• GPO to map a drive (on xp sp2 and sp3 clients) based until membership in one group does not completely finish the mapping

  Hi all

  When you try to use a GPO to map a drive (on xp sp2 and 3 customers) based up to membership in a group, it is not completely finished

  Have created a GPO called MapDrive

  -Under User Config. > Preferences > Windows settings > card reader

  -Set Action = replace and it to map to \\Servername\share\%username% if the user is a member of the XYZ Group (common tab > Item-Level targeting)

  What is happening, it's that the good player cards\\Servername\share\ of under file which is the user name.

  To get the GPO to work that day

  -Did you have to install the patch installed XP from KB943729for side extensions (CSE) Client

  -J' also put a policy of waiting for connection before login (this fixes a problem of no similar mapping with the home folder that you can set the path in the user account object)

  Any ideas why the drive mapping complete otherwise would not work or have a work around?

  See you soon,.

  Schmills

  ThanksThahaseena M.

  In fact, I found that it was not a problem with what I did, in fact, it worked.

  What I found is when you map a drive via gpo to a subfolder, for example\\servername\share\subfolder

  What is displayed is\\servername\share , but it actually be mapped directly to the subfolder. In the GPO, you can create a label for the drive, so in my case I created a StorageFor_ %username% label, which then displays the user who received the file, which is what I wanted.

  My original mail can still help those who have problems with

  1 folder without mapping entirely

  2. the CST for HP patch is required for the mapping of the readers via GPO.

  See you soon,.

  Philippe

• Drivers / downloads: maps sound, audioactivemixers:

  My sound card was stolen out of my computer, and I need to know if there is what I can do to restore the sound on my computer. I have a Dell Dimension = 1100-B110 Dell IBU = Americas, Deosi from Dell, Dell computer Corp. = A01. My processor information. is: Intel (R) CPU 2.53GHz,Version-x86/Family15/Model4/Stepping9, speed: 2527 MHz. My service number is: H5M9NB1 and my express service code number is: 37345032253. Can U help me?

  The audio device is integrated, so don't steal it, simply bocome corrupted by the installation of something recently.

  To fix this click here and download and install the audio drivers. Should work:

  http://support.dell.com/support/downloads/driverslist.aspx?os=WW1&catid=3&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=DIM_CEL_1100&hidos=WW1&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  See you soon,.

  Jerry

• Try to create a new VPN connection but Creat new network connection is grayed out

  Hello world

  Thank you for your help in advance.

  I would like to ask why I could not create a new VPN connection as the "Creat new network connection" is grayed out. I'm also sure that remote access connection manager, and another car once are started.

  I can create an account with my domain administrator account. But once I passed the orginary user, the shortcut to the connection could not be accessed. I also tried to add the user to the local Administrators group, and the result is the same.

  HOEP that you can help.

  Thank you.

  Windows XP Service Pack 3?

  Do you have any software security 3rd party running on this computer?  Or maybe something in group policy that limits access to create a new network connection?

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• HP printer device manager! Symbol, "failed to connect" Windows Sound - still Printer Works

  Every time you start, I hear the sound of the device "Windows failed to connect.  How can I get rid of this?

  I have a printer HP of J6480 with WIn 7.  Device Manager does not recognize the printer driver.

  In Device Manager, the printer appears with the! error symbol.  No other devices have an error symbol.  The HP Solution Center and the printer work again.

  (1) I tried install fresh of the current HP software full functionality.

  (2) I tried the HP uninstaller program, through all five uninstall programs twice.

  (3) I ran CCleaner to clear the registry problems.

  (4) I tried to delete the Device Manager "Officejet! Entry J6400 series.  The Solution and the printer Center then do not work.  Apparently, the Device Manager recognizes the printer but not the driver.  I have to go to 'Programs', 'HP', then 'Officejet J6400 Series' to reinstall the software.

  (5) I tried to get the Device Manager to recognize the software.  When I click on «!» OfficeJet 6400 series', I get the message "the drivers for this device are not installed (code 28).  If I then click on 'Update Driver' and select' Browse my computer for driver software"then click on"Browse "C:\Users\Myname\Downloads", where I have the Sofware HP 13.0 full feature software and basic print and Scan Driver files, he says "Windows cannot find driver software".   If I click on "Search automatically by the driver software", I get the same message.

  I would appreciate ideas!  Thank you!

  Friendlycomputr,

  OK, if a few things stood here:

  1 windows its "cannot connect device" sounds only with a direct connection, not a network connection which is what you have. (Ethernet)

  2. have you had any other device installed on this computer is more active?

  I would like you disconnect the Ethernet connection and go below:

  1. uninstalling the printer software

  2. make a restart on the computer, when it starts, do you hear the sound "device cannot connect?

  Let me know.

• "Sound does not play well and seems to be cut in videos with windows media player 11

  original title: Windows Vista

  Windows media player 11, I have a problem with the sound. background noises seem ok. the main sounds a mute. You can hear the main people you can hear the background. Please help me solve this problem.

  Hello
  Here are a few steps to try:

  No sound

  If Windows Media Player seems to work fine, but you cannot hear the audio, you will have a problem with your speakers or sound card. Check all audio connections if you are using external speakers and to ensure that sound levels are defined correctly and not cut. Use Device Manager to make sure that your sound card works correctly and is selected as the audio device by default.

  No reading

  A file that simply will not play could be related to DRM - Digital Rights Management - which means that the file is protected by copyright and you do not have permission to read the file. You may need to visit a Web site to purchase a license to play the media. Some files are compressed and require a set-top box, known as a codec, installed on your computer. You can identify the codec required of the file name extension, such as. WAV or. MP3. Once again, you will need to download the appropriate codec so that Windows Media Player can decode the multimedia file.

   

  Verification of the sound settings

  Click on Start , then Control Panel
  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

   

  Reinstallation of Windows Media Player

  In the control panel...

  Go to "turn on or off Windows features.
  * Disable features Media: Windows Media Player
  * Reset
  * Provide characteristic Media: Windows Media Player

  hope this helps

  B Eddie

• 'The specified network folder is currently mapped using a different user name and password'.

  "The specified network folder is currently mapped using a.
  another user name and password.
  Connect using a different user name and password
  First, disconnect any existing mappings to this network
  share '.
  I got this message when trying to access a laptop on my home network. It's a laptop which came for years. The only change that occurred was the removal of a few videos to Windows Media Player. In fact, I was sitting near the laptop (laptop 1) that stores the video & audio files that I share on my network for years and an additional (cell 2) laptop computer on my network. I was simply remove a playlist via WMP and I witnessed portable 2 lose access to files I had shared for years with my home network. I don't even use WMP, I had just open trying to access the laptop 1 video/audio files to my PS3 system. I was clear an old list of video of WMP so I could add the extra avi files to the list that I had collected over the years. I wanted to not double many videos so I removed the videos in WMP list. Since then, I'm not able to share anything of my laptop 1 to the rest of my network. I did not like WMP before, now I really despise WMP. When I try to share a folder, right click, share with & click on homegroup (read/write), the option is not selected. Any solution would be greatly appreciated. Thank you

  Hello

  The link below talking about a similar problem that should help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/the-network-folder-specified-is-currently-mapped/928f6313-fe2c-4d2D-A247-152ec022e062