CONNECTION PAGE and resources/image display

Similar Questions

• The problem of the connect role and resources

  Hello
  
  As we know, all packing a new user, we can assign connect and resources so that the user can access the system tables.
  
  The problem I got is rather than affect the connect role and resources, I assigned each individually privilege to this role. But, surprisingly, my user has no privileged o accessing space of system tables.
  
  I was working in oracle 9i database. Can someone help me with this and tell me what is the reason behind this?
  
  Thanks in advance.

  Hi role of internal resource composed unlimited tablespace and quota on the tablespace system. but this is not shown in role_sys_privs. We must at the same time the role of resource to think twice or three times. also, as said we shouldn't use system tablespace.

• Web pages and user interface display too small in Firefox 20.0.1 (but fine in IE and Chrome) - how can I fix?

  On my Dell Inspiron 7720, running Windows 8 64-bit, Chrome and IE display web pages in their correct format immediately after their installation, but Firefox 20.0.1 displays too little (and the user interface of FF is too small as well).

  I went on all kinds of things, it might be and know I can install an add-on to enlarge pages at least, but I really want to get FF displaying correctly of course.

  I use my native resolution 1920 x 1080 - laptop and have to display Windows set up for display at 150% - % of Windows display development does not affect display FF.

  Can someone tell me please how to get FF displaying correctly (without an add-on.)

  Help appreciated,
  US5

  Thanks for your help cor - el.

  I just installed NoSquint and it works perfectly for the web; pages. Then, I found a theme with bigger icons in "complete themes" - there are a number of them.

  Guess I expected to understand why only FF was smaller, (not just solve the problem) - However, the setting is very nice-thanks!

• Re: Satellite A200-1AX - black and delay image display

  My Satellite A200-1AX is 3 weeks old and its LCD screen has been replaced by Toshiba Center here, to the Kuwait due to defects.
  After placing the new LCD screen I notice that whenever I'm turning on and off the device, a black picture delay appears slowly and disapperaing.

  Can you please tell me if this is normal in appearance as the technician in the Toshiba Service Center told me?

  is there a problem with the installation of the new LCD?
  I find this thing as an abnormal display when booting and the shutdown of Unity State.

  Hope that give you sometimes meet me and best regards.

  Hello

  It very difficult to understand how this question is similar to s

  But to be honest I didn't noticed any delay return image on my laptop
  If I boot the laptop, the Toshiba start screen appears and then after several seconds the notebook starts the Windows operating system. The screen immediately goes from black to blue (windows form). The same phenomenon occurs during the closing procedure

  This issue is perhaps something to do with the first replacement of the screen, but this is just a suggestion

• Can I get an imagefield to fill images on all pages once the image is uploaded

  Hello

  I'm fairly new to LC and I have a dynamic long form from scratch. This form will be used by sales, which will be

  'configure' services, taxes ect to be on the form, then send it to the applicant to be filled. I wish that our sales representative to be able to upload an image to a field of the image (logo) and this logo to be displayed at the top of each page. As I can't seem to add an image field action, how can I do? Million thanks in advance!

  They do not have access to the page master - the master page is what the form is built on, where you set your margins, setting page, boilerplate info, etc.

  You could also have a field of the image on the first page and the image of the field where else you need them and use the global binding to share the same data - for global binding to work they must have the same name and then on the object > link set palette data binding to use global data.

  Or you could code with the rawValue: imageField2.rawValue = imageField1.rawValue;

• Page master w/Images in each post

  So my problem is simple hopfully. My main page which lists all posts "most recent" includes the following: title, Description (1st sentence), link to the details page and an Image. The problem is that I have several images related to each "Post", so it shows it more than once. For example, one I have 3 images of and it publishes all 3 different images, but the same title, description and link.

  How can I overcome that it is only to enter the 1st image related to the post? And how do I have text and description 'float' above the image. As everything is in a < p > and just a loop.

  In my functions.php

  function getAllPosts ($read) {}

  $sql = ' SELECT *.

  MESSAGES

  INNER JOIN post2photo USING (post_id)

  INNER JOIN photos USING (photo_id)

  ORDER BY created DESC';

  return $read-> fetchAll ($sql);

  }

  In my Master.php

  $feature = getAllPosts ($dbRead);

  <? PHP foreach ($feature as $post) {? >}

  < p >

  <? PHP echo $post ['name'];? >:

  <? PHP echo ['description']? >

  < span id = "places" > < img src=".../image_upload/ <? PHP echo $post ['filename'];? ">" width = "400" / > < / span >

  < a href = "detail.php? site = <?" PHP eco $post ["link_name"];? > "> more information < /a >"

  < /p >

  <? PHP}? >

  Think I found it...

  function getAllPosts ($read) {}

  $sql = ' SELECT *.

  MESSAGES

  INNER JOIN post2photo USING (post_id)

  INNER JOIN photos USING (photo_id)

  GROUP BY post_id

  ORDER BY created DESC';

  return $read-> fetchAll ($sql);

  }

  Do what he catches only one instance of each post photo. I'm testing to ensure that it is the right solution.

• Page tabs are not displayed on the page

  Hi all
  
  I created a page of tabs that have a link to a page. However, when I go to this page, the tab is not displayed. I notice that the shared-> component tabs of the page has nothing.
  
  Any idea? Thank you!
  
  Concerning
  Aaron

  Hello

  Will modify the properties of the page and find the display attributes
  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/bldr_pgs.htm#sthref614

  BR, Jari

• use of display and IMAQ image memory

  Hello

  I wonder how much memory is used when updating from imaq image display.

  I need to display images (512 x 512 size) acquired by a camera in real time. But I don't necessarily need show each of them so that can save me some memory. The camera runs at 50 fps and I can live with display rate 5 frames per second.

  Right now my image display is updated from the buffer (updated at 50 fps) continuous (Snapshot mode off). I guess I have 3 options:

  1 use the lifestyle snapshot and say explicitly on the screen to update. Whenever the display is refreshed, a copy of the image is created. But I guess that the previous copy is destroyed at the next update. If this method costs an extra copy of the image in memory.

  2. create an extra copy of the image that is updated only at 5 fps and connect it to the display of the image (Snapshot mode off). I think this is equivalent to method 1, with respect to the use of the memory.

  3. in the State. No additional copies of the image is stored. But the display is updated at 50 fps.

  Which is more expensive, update the display 10 times faster or holding an extra image even copy of the memory size?

  Thank you!

  It is not really a memory problem: you have an indicator to display images. Display an image requires additional resources, but there is no continuous memory allocation! Once the resources are allocated, the use of the memory of your application will remain stable. (Otherwise, something goes wrong and need to be identified and fixed.)

• Orcle ADF: Background Image of panel group put on the page is not getting displayed in stubborn browser task-flow

  Hello I'm developing a web application using ADF (jdeveloper 11.1.2.4). I have a template that I have panelGroupLayout. I put a background image for the grouplayout. And I created a test.jsf page from this template. When I run this page directly background image is displayed in the browser. I put this page in a stubborn taskflow. My problem is when I execute this page of the stubborn taskflow background image is not displayed.

  Image is displayed for this URL: http://127.0.0.1:7101/EasyRUN-ViewController-context-root/faces/login?_adf.ctrl-state=1px1s1o6o_26

  Image is not posting to this URL: :7101/EasyRUN-ViewController-context-root/faces/admin-flow-definition/homePage?_adf.ctrl-state=1px1s1o6o_29 http://127.0.0.1

  Please help me. Thanks in advance.

  The part of the url of the background image is the problem, probably

  As first of all, try to assign relative to your location of workflow, for example:

  background-image: url("..) ("/ ERUnBPart2.png")

  just to see what happens

• Before and after Image Slider widget will not be displayed in the lightbox display composition

  So my project involves a major project gallery page containing several compositions display lightbox that trigger when click.

  For some reason any when I add the widget before/after Image Slider Muse - Themes in the lightbox, the widget will not be displayed on the preview or Chrome.
  Please help me and thank you.

  You will need to contact the Support of the Muse-themes to see if it is compatible for this purpose or if it is possible.

• create a link to the page html to images and css

  A customer wanted a change to one of the pages on their website. So, I opened the page in DW and "recorded under ' another name of the same page (in order to keep a copy of the original page) in the same folder of the site. I made the changes and it was going on well in the browser preview. I then renamed this revised page identical to the original page back. I made this name change in the file to the desktop folder (could this be the problem?). When I downloaded from the site, it looked like all connections to the doc .css and the folder of images are no longer there. So, I pulled it in offline mode and now I am trying to find a way to re-establish links the .css and the images. Everything seems fine when open in Dreamweaver and when I preview it in mode browser, however in the thumbnail preview shows question marks when the images are supposed to be, and when I download it, it looks like hell.

  Any ideas as to how I can restore links?

  Thank you.

  rigoliarts wrote:

  I made this name change in the file to the desktop folder (could this be the problem?).

  Yes, that would be the problem. You should never work via the files Panel > window > files. If then, you make changes to a file or move to another location in the folder root of the Dreamweaver site will ask you if you want to update the links with this file assocaiated.

  rigoliarts wrote:

  Any ideas as to how I can restore links?

  Unless you have a backup of the original file, you may need to update the links manually. If you have the orginal file back to its original location, and then perform updates through the control panel site.

• Images on the yahoo home page does not load/display in firefox

  Everything suddenly when the yahoo homepage support any of the images on the page are visible. This has never been a problem in the past. I tried the previously recommended fixes, such as clear, clear cookies, caching, updating firefox, etc. I even tried to delete the Chamber of combustion and redownloaded/reinstalled but still have the problem.

  What antivirus security software do you have?

  In this thread, Avast has been identified as the cause of a similar problem.

  • [/ questions/1082096 it miss me photos on Yahoo.com home page and do not know why, any help?]

• Error of Facebook, what can I do? Resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-Jetpack/qclean-remove-Facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  Facebook maintains the gel, a problem caused by this script resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-jetpack/qclean-remove-facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  I tried many solutions suggested, nothing works. Please advse. Thank you.

  Ed

  Hello ed, this error is caused by the qclean addon that you have installed. Please disable or delete or report the problem to the author of the extension...

  Disable or remove modules

• The new tab page was going well for MONTHS, had an image I have uploaded. Today, I had a 'safe' mode what to be, and my image disappeared. How do I restore, so my image rises?

  I had set up my new tab page with an image I have uploaded. It worked fine for months, or even years.

  Today, I had a 'crash' that asked me to start Firefox in "safe" mode or "restore". I chose "restore."

  On this, my image disappeared from my the new tab page. I can't find how to restore and Add ons that supposedly allow me to add my own image are not useful. At least, I can't understand them.

  Can provide you assistance on a computer for Dummies level?

  If you deleted the folder "Old data Firefox" you have not the ability to restore your previous profile data.

  If it's an image you have stored on your computer, you can open this image in a Firefox tab (Firefox > new tab > open a file).
  
  This will give you the file:// URL in the address bar and you can use a copy and paste this file is enabled in the new tab page.

  You can set the browser.newtab.url pref on the topic: config page and set the value of this pref on this URL for you the new tab page.

  You can open the topic: config page via the bar addresses as you open a web page.

  • http://KB.mozillazine.org/about:config

• From about 24 hours ago, "Save Page As.... "and ' Save Image as ' do nothing.

  Firefox is ignoring "Save Page As.... "and" Save Image as... ". »

  Create a new profile as a test to see if your profile is the source of the problems.

  • Basic troubleshooting - a new profile
  • Now, launch Firefox with the new profile.

  IF this new profile works, then you can retrieve your history, bookmarks and passwords from the old profile.

  • Recovering important data over an old profile

  Check and tell if its working.