Re: Satellite A200-1AX - black and delay image display

Similar Questions

• Satellite A200-1AX - recovery in German instead of the language CD English

  I reinstalled the recovery of the proceeds of my satellite a200-1ax disk and operating system running now in German language. and it's only now that I noticed that the drive that comes in the package is in German but I chose the English language at the beginning of the recovery of product.

  What to do now?

  Jose now very annoying.

  Hello

  Where did you buy this laptop? In Germany?
  The recovery CD is delivered in the same language, where you bought the laptop.

• Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

  Hello

  About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
  It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

  Some time passed and I removed Vista and now I have Windows XP with sp3.
  All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
  I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

  Here's a screenshot of my device manager:
  [http://img22.imageshack.us/my.php?image=devicem.jpg]

  Those with question marks is not supported by XP as I know, correct me if I'm wrong.

  Hello

  Satellite A200-1AX belongs to the PSAE6E series.
  It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

  Regarding the housing of card reader SD;
  You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

  Good bye

• Satellite A200-1AX - External monitor reset

  I got my car and Acer monitor 20 inch and after a few minutes of use resets the monitor (becomes black and goes up to 1280 x 800).
  I tried on a different Satellite A200 with same works card (my brothers) like a charm, but when his hook on mine it keeps resetting. And also I see horizontal lines on the screen.

  My model is TOSHIBA Satellite A200-1AX (with a vga HD 2600 card).

  Hello

  You can disable the option in the power options of Vista to prevent mode standby when the lid is closed.

  > I got my self and Acer monitor 20 inch and after a few minutes of use resets the monitor (becomes black and goes up to 1280 x 800).
  However, reading this post I'm not sure if your external monitor goes black or the A200 display internal.
  Is what screen affected?

  Did you try a BIOS and update the display driver?
  If this is not the case, check this box!

• Satellite A200-1AX - overheating of the graphics card in Windows 7 64 bit

  Hello.

  Model of my laptop Satellite A200-1AX possessing a Mobiliti Radeon 2600 video card.

  After installing Windows 7 64 bit can't find the correct work display driver.
  Fan does not work quickly, by the suite and heavy applications is overheating and the laptop is turned off.
  Not able to find a driver for Windows7 64 bit or Vista 64-bit for my card on the Toshiba site.

  The site of AMD.com a driver for Radeon 2XXX series:
  Windows 7-64 bit ATI Catalyst a? ¢ Display Driver Version: 9.9, Edition Release
  Date: 09/09/2009. -Drivers do not help.

  I tried to increase the fan speed you programs 'ATI Tray Tools', has not helped.

  Please help me with my problem. Sorry for my English

  Hello

  The drivers of Toshiba laptops are a bit different and not the same thing as the drivers from the manufacturer of the graphics card.
  The original ATI drivers are made for office use and not for mobile use. Drivers Toshiba takes supported thermal protection that allows to control the performance of gpu and the dissipation of the heat.
  If you want to use a page ATI driver then your GPU could create more heat as usual which leads to the unexpected shutdown.

  I installed Win 7 on my A210. I didn't install the driver of ATI graphics card because the Win 7 automatically recognizes the graphics chip.
  After installation, I went to the Device Manager. Then, I chose the graphics chip and looked for the driver automatically. Windows has found the right driver and installed this
  Since the unit works perfectly with Win 7

• Satellite A200-1AX: Win7 has very limited screen resolution

  ?:| Can someone help me please?

  I have a SCREEN RESOLUTION (1280 x 800) after that I went to w7, before I can get about 1600 x 1280 when I was in very limited vista. I lost my vista recovery disk so I decided to go with w7, but after that I did some installations/updates to update for all my drivers again my screen resolution gives me the size 1280 x 800 maximum.
  Anyone? Please? I need your suggestions...

  -J' have a Satellite A200 1AX (recently moved from vista to w7)
  -Screen: 15.4 "
  -My graphics card is ATI Mobility Radeon HD2600.
  -I just downloaded the latest driver from ATI.

  Please tell me what I'll do.
  Thanks in advance guys...: D
  Jeje

  > Until I can get around 1600 x 1280 when I was in vista
  I can't believe that why?
  Because the screen internal 15.4 "WIDE XGA supports a maximum resolution of 1280 x 800.
  Max which is possible on the internal display, and as a result, you will not be able to choose a higher resolution on the internal display.

  The resolution of the external display may be higher but not the resolution of the screen internal.

• Satellite A200-1AX: very grainy videos after Win 7 installation

  Hello.

  I have a toshiba Satellite A200-1ax and uses it for Vista when I got it.
  I've got rid of the operating system and to install XP, thous install BIOS update for XP.
  I recently installed Win7 and everything is good. The only problem I have is with video files.

  Everything I look at is very grainy.
  I installed codecs and the catalyst for Win7 beta and the thing got a little better. Always rasterized.
  But the HD video files don't work at all. It's the same as having a video card that does not support HD.
  Audio shopping before the video.

  I have not changed anything with the BIOS.

  The problem may be there? Can I update the BIOS for vista?

  Windows 7 is not official on the market it s still in version beta and I think it contains many bugs at the moment
  It would be really interesting to know if the same videos will work perfectly with win XP or Vista.

• Re: Satellite A200-1AX does not start after the BIOS update

  Hi all!

  I wanted to install XP on a Satellite A200-1AX.
  So I tried to update the Bios to the version that supports supported XP.

  When I tried to install it, crashed Vista and now the laptop won't even turn on.

  When I keep the power button pressed, the whistling fan but nothing happens.
  I think the BIOS is gone or corrupted.

  What should I do?
  Thanks in advance for any help!

  > When I keep the power button pressed, the whistling fan but nothing happens. I think the BIOS is gone or corrupted. What should I do?

  What to say to boyfriend. It seems that something was wrong during the process of updating the BIOS maybe the BIOS was not written correctly and the ROM module must be flashed again with the help of a special procedure and the tool.

  In this case, you can do anything you will need to contact the ASP in your country for a fix!

  Don t waste time and ask a technician for assistance.

  Good luck and best regards

• Satellite A200-1ax: could not get the BT working on Win XP

  Hello

  I have a Toshiba laptop satellite a200-1ax. I installed Windows XP sp2.
  My problem is that I can't get the bluetooth work. I have installed a Toshiba bluetooth driver and nothing. When I try to install the bluetooth stack Toshiba the instalation stops at the driver part and won't. I tried, and left for more than 2 hours and it was not moving.

  When I opened my device manager there is no place where a bluetooth connection is mentioned. In the bluetooth of the 5 information system services where collapsed and to manual start. I tried to start manually services.msc, but there was no available bluetooth service.

  You have to add that I have 3 elements in with question marks Device Manager:
  1. mass storage controller
  2. feature modem on high definition audio bus
  3 PCI memory controller.

  If anyone can help with the problem of bluetooth, or three missing drivers, please do :)

  Hello

  The Bluetooth should work!
  The laptop supports the BT module, and I think that you have not properly installed.

  Firstly don mix t the monitor BT with BT stack. You need the BT stack!
  I think that you should remove the software BT OS and after that new reboot should try to reinstall again.

  Then you must enable BT using the Fn + F8 key to complete the configuration of BT!

  Other devices such as PCI memory controller and mass storage controller. Are not supported by Windows XP and therefore there is no drivers!

• Satellite A200 - 1C0 - overheating and close

  Hello world:

  I ve got a Satellite A200 - 1C0 PSAE0E and since one month, it stops due to overheating (hybridized with hot CPU). The fact is that when I restart the computer to the BIOS screen, fan of the processor begins to work at a very high speed (to cool the CPU), but to start Windows to start the fan suddenly stops, and the fact is that the CPU is always at 78 degrees celsius.

  I tried updating the BIOS, reinstall windows recovery partition and all components, but it does not solve anything. Also tried to install Windows 7 and still nothing and windows Xp and still nothing. I Don t know what else to do. Help will be apreciated.

  Thank you very much.

  Hey,.

  To properly clean your cooling system, see this article from Toshiba:
  http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

  Another reason could be the old thermal grease and maybe, it must be renewed. If t, you can do it yourself, ask a technician for laptop help! :)

• is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  Hello everyone

  is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  It depends on the image and the module LabVIEW available to you. LabVIEW can open bitmap and png files and convert them into tables: if it's really a monochromatic (depth of 1 bit) you get a table 2D boolean, T for white, F for black. Just look at the index of the item to its details (don't forget that LabVIEW does not use the order of rows and columns, so you must transpose and reflect the table). If you have a 24 bit bitmap, the table will contain the color in hexadecimal synthesis (000000 for black, FFFFFF is white and so on); Yet once, you simply check if the element of the array correspond to your requirements and get its index.

  With the vision that you module con open other pictures and perform advanced on them without convert them into tables. Anyway, you can just type the extension of your image using LabVIEW and see what you get.

  Here is a code snippet to open a monochromatic image

  

• Beginner help.  Changing an image of the stock in a pure black and white image without grayscale.

  I'm taking a black and white (gray scale) tigerpaw and convert it to a totally black and white image without grey scale.  I imported the image (free, unprotected) and size it.  I used the magic wand to select all areas not black and I want to just convert to white, but I can't seem to understand this.  I'm sure this is a stupid question, but the solution is to escape despite the search. Thanks for any help.

  Now that you have selected all of the areas you want to edit white > fill and, in the field of use, choose white. The mixture of Normal mode.

  If you wish, you can select > Inverse the selection and edition > fill with black

  Then select > deselect

• Satellite A200-1AX (PSAE6E) - S-Video picture black, white and rolling

  I purhcased my A200 Satellite on my last trip abroad when I was away from the USA.

  Recently I tried to play a movie via s-video on my Sony TV purchased USA. The image is black and white and hilly. I have updated, updated and done everything possible for computers and readers. I tried an another Toshiba identical to mine, but was bought in the USA. It worked fine and all colors.

  Any help is appreciated.

  Hanks

  Hello

  I had the same problem a few months ago, and the reason was an S-video cable defective. As far as I know it was a very good cable too and I went to the store of the computer purchased a high-quality S-video cable. It was a little more expensive, but it works perfectly!
  Check it!

  In addition, you should check the output signal from the S-video port and the input on your TV mode. If you use NTSC, you have to set this mode, otherwise use the PAL mode.

  Good bye

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• Satellite A200-13R - black screen after cleaning the fan

  Model name: Satellite A200-13R
  Model no: PSAE0E-011014GE

  I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

  Any solution please?

  Thank you

  Nick

  You have disconnected the display while you cleaned up the laptop?
  Are you sure that the display is connected correctly?
  Check the cable?

  > The laptop shows that read the hard drive and the processor works well.
  How do you know that? Flashing LED HDD?
  You know, it's not easy to say what may be the problem.

  You can also try testing with external monitor.