Connection to a system of Logitech speakers to my laptop

Similar Questions

• My speakers to the stopped working. Them are the Logitech speakers to a laptop. When I turn on my laptop, I get a message that says the following. Error 0701: over-current usb on HC/Port-Bus: ooh Dev1dh Fun: 024 / Port: 01 h

  Logitech speakers no longer work on my laptop. I need help. I have windows vista home, I had these speakers for over a year and now they do not work.

  Hi Rickdm,

  This error occurs when you have a USB device or USB port problem.

  You can try to remove the speakers, restart the computer and check what is happening.

  If possible, try to connect another audio device in the computer. Try a pair of speakers to ensure that the problem is not related to the different sound device.

  Determine whether you can hear sound. If you can hear the noise, there is a problem with the audio device.

  This also happen if the usb port is damaged, try with a different usb port. If it still doesn't work do not, contact manufacturer as it is a hardware problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have windows xp installed on my computer. I connect logitech speakers in my box, but I have no sound. they still do not work

  I have windows xp installed on my computer. I plugged in my speakers logitech box and I know the speakers work as I went down my dad's computer and they were going when he had it. I don't know much about computers and I can't really afford to pay someone to look for me. I think there may be something wrong with my sound card, but as I said I don't know much about computers

  If the PC has moved when it was given to you, make sure that the speakers are plugged into the correct audio device decision-making. IIRC it's the green plug. If they are USB, plug it into another USB port.

  Re-post if it isn't that, giving also make, name and model n ° of your PC/computer laptop and similar details for your Logitech speakers. Also right click on my computer > properties > hardware > Device Manager > all yellow exclamation then your audio device? Any reference to an audio device (Realtek, Soundmax...?

  See you soon,.

  Jerry

• Logitech speakers, no sound

  I have a hp pavilion a1250n running windows 7 32 bit and I use sl11 logitech speakers. They worked well until a month earlier, when his order of play. When the volume controls are, there the micro logo but with a red cross on it. When I put it to detect the problem, it says no audio devices are installed.

  Unfortunately I lost the disc that came with the speakers. How can I get my speakers to work?
  any help would be appreciated
  -Noah

  Hey Noah,

  1. are you aware of any changes made to the computer before the show?

  2. are you able to hear the sound of the external headphones?

  This problem can be caused by the sound card drivers.

  I suggest for the link and follow the steps in the article about the computer manufacturer site.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01950055

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• How to find on which device connected to my system does not work?

  I have XP Professional.  Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.)  In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?

  1. click on start and then click Run.
  2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
  3. in the Device Manager window, click view, and then click Show hidden devices
  4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.

  I hope that helps!

• There are other users connected to your system, you still want to close?

  Hello

  I use Microsoft for MSDos operating systems and have never encountered a problem like this. I have Windows XP on one of my systems - all the other PC in my family have Windows 7 installed on it. When I shud down my Windows XP system, I get the message "another user connected to your system, you always want to stop there?". I installed all the Windows 7 systems on all family systems and Windows XP Professional I am writing on the subject. There is that one account on this Windows XP system and nothing else existed. Security software, that I am running is Microsoft Security Essentials. I don't let just anybody use my system or never have what means the messge above. Were there a security breach? I do not know. Help, please. Thanking you.

  Kind regards

  Mr. V. Khambhaita

  E-mail address is removed from the privacy *.

  It is possible that one of your machines connected on a network share of this machine.
  The next time this happens, right-click on 'My computer' then -> 'Manage'-> System Tools-> Shared Folders-> Sessions.  See if a session is appear on this screen.

  HTH,
  JW

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am unable to connect to the internet. I get this error message "Windows does not have to connect to the System Event Notification Service service.»

  my computer is showing this message and custom allow Internet: Windows could not connect to the System Event Notification Service service.  This problem prevents limited users to logon to the system.  As an administrator (which I don't have) you can view the system event log to see why the service did not respond, can anyone help? Please

  original title: can't get on the internet

  Hello

  Try the steps in the following article:

  "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP and Windows Vista":

  http://support.Microsoft.com/kb/811259

• Windows could not connect to the System Event Notification service.

  I have a DELL Latitude E6500 32-bit computer Vista Ultimate SP2 with a wireless network in the home network. I got the above error message tonight and I don't know what to do about this. He said that this prevenets limited users to connect to the system. I don't know anything about networks. The Geeksquad installed for me and I'm lost.

  Help, please.

  See if this will help you to start the recent Notification System...

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll down to find the event notification system... > until it clicks >
  topic status, it should be... Has begun
  under Startup Type, it should be... Automatic
  If it is not defined, right-click the event notification system > properties >
  in the start of type position, click on the pointer, and then select Auto
  as a Service status, click Start
  Click OK when finished

  Make the same adjustment of...
  Remote procedure... that represents the remote procedure call (RPC)
  DCOM Server Pro... which represents a DCOM Server process Launcher

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not connect to the system event notification service service.

  Hello

  For the moment, I have a problem as in the title. Whenever I have Windows startup, a message box appears to tell me that it couldn't connect to the system event notification service service. I also lost my Aero theme too, they was disabled and cannot be enabled. I checked all the services, and they work fine. I tried "'winsock reset", "sfc/scannow" but nothing doesn't change.

  BTW, here is my journal CBS . I use Nod32 Antivirus.

  Sincerely,

  Quan Nguyen T.A.

  The WAT update seems to have been falsified.

  The installed product key is a MSDN one which was broadcast all over the internet.

  https://www.Google.com/search?q=2CGXT-3BQDX-DG8BM

  The installation is a counterfeit.

  You must reformat and reinstall using authentic materials and key.

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.