Connection to a wi - fi network

Similar Questions

• It's silly. Only tell me that since I don't have a data plan I can't receive texts to other iphones until I am connected to a wi - fi network?

  Got a new iPhone, but I don't have a data plan.  Another text of iPhone users I who sends as a default imessage. Since I don't have a data plan which means that I can not receive the text message until I connect to a wi - fi network, because the message being sent is an imessage and not an SMS! It's ridiculous, Apple. How to do this without having to buy a data plan?

  

  Either disable iMessage or get a data plan. No media support allows the use of an iPhone without a data plan.

  It is a smart phone. It is designed to be constantly connected to the Internet. If this isn't what you want, then get an iPod Touch and a silent phone instead.

• I can't connect to any wi - fi network

  I can't connect to any wi - fi network

  Follow these steps:

  http://osxdaily.com/2015/10/16/fix-Wi-Fi-problems-Mac-OS-x-El-Capitan/

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• MacMini don't auto connect to the preferred wireless network when the router reboots

  My MacMini is located to join my favorite wifi network. Where I stay, there is usually a power failure close to a minute or two during the day.

  My setup is such that my MacMini running 24 x 7 with a backup uninterruptible but my router (AirPort Express) turns off during the power outage. When the router goes off, my Mac disconnects from the network which should, but now when my router turns, the MacMini reconnect to the preferred network.

  It shows the network preferred list, and when I manually click on this subject, it reconnects immediately without asking for password. But this will not happen automatically.

  If I restart my MacMini it reconnects very well. The problem occurs only when my MacMini is but my router restarts.

  To reproduce this problem on your side, just turn off your router and once your Mac disconnects from the network back on the router. See if your mac reconnects to your wifi fine.

  Any solution or advice for this problem?

  Thank you.

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  1. If possible, test at another network, such as a public access point or hotspot created by a mobile phone. Some Wi - Fi routers are not fully compatible with Apple devices. More specifically, the security mode for the network, as shown in the network preferences window, should be 2 personal WPA or WPA 2 Enterprise. If the router doesn't support either of these modes, it should be replaced with another.

  2. make sure that the network is on the list of favorites by following these instructions. It is important to read the article, as it is the starting point for further efforts to solve the problem. If you skip any step, the problem cannot be resolved. Make sure that the box marked

  Remember this computer has joined the network

  is checked.

  3 follow the instructions in this article to support.

  4. reset the PRAM.

  5. take note of all your parameters of connection Wi - Fi in the network preferences pane, then remove the connection in the connection list and re-create it with the same settings. This by clicking on the icon of the lowest sign from the list of connection, select Wi - Fi as the interface in the form that opens. Select join the other network in the network name menu, then select your network. Enter the password when you are prompted, and then save it in the keychain.

  6. in the menu location at the top of the network preferences window, select Edit locations. A sheet will fall. Click on the plus sign to create a new location. Give it the name of your choice. In the new location, set up the Wi - Fi service with the same settings that you used before. Click on apply and test.

  7. run the Keychain Access application. Find and remove all the network password AirPort elements that refer to the network. Make a note of the password first.

  8 turn off the Bluetoothand the test.

  9. reset the system management controller.

  10. This step should not be necessary, but he has been advised by the Apple Support in some cases, apparently as a solution for a bug. Open the energy saving pane in system preferences. If necessary, click the lock icon in the lower left corner to unlock the settings. When prompted, enter your administrator login password.

  Select the Power Adapter tab and uncheck the boxes marked

  Continued access to the Wi - Fi network

  and

  Enable the NAP...

  If it is present. Then, if the computer is a MacBook, select the stack tab and uncheck the box

  Enable the NAP...

  11. reinstall OS X.

• Connecting Xbox to WPA enterprise Network

  Hello

  I'm trying to connect my Xbox to my network, schools so I can update the console but it comes up with the error that the Xbox can connect to the enterprise WPA security.  Is there some way I could either connect or manually install updates. (update to the NXE)

  Thank you

  -Steven

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't.

  Configure the connection without my Windows XP CD?

  
  

  I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't. Is there something that I can get online? What should I do?

  Hi Humphrey2,

  I suggest you arrange for an installation CD of Windows XP which may be necessary to copy the files to configure the network connection.

  You can follow these links and check if the problem persists:

  In Windows network connection issues

  How to troubleshoot a network home in Windows XP?

  
  Reference: Overview of the Network Setup Wizard

  Hope the helps of information.

• uninstall the wireless printer. Try to install using connection USB installed on a network.

  Try to install HP Officejet 6500 wireless by using the USB connection. Installed on a network.  How do I uninstall and let Windows identify as new material on a USB connection?

  Turn off the broadcast of your wireless router signal. Shut down the PC. Menu using the printer configuration to remove or change the SSID. Then turn the printer off and connect it to a USB port (this implies that all the necessary software has been installed). Now turn on the computer and turn on the printer. Once the printer has been detected the turn on your router.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows Vista continues to try to connect to the VirtualProfile in network connections.

  I was helping my brother set up its new Netgear Wireless USB adapter in Windows Vista and kept running into the same problem.  Once the adapter has been installed, Vista would continue to try to connect to a VirtualProfile under network connections which would interfere with the connection of the profile.  I had my brother take the VirtualProfile and then it connected correctly.  However, after each reboot, the connection of VirtualProfile appears every time and we need to start over the process.  A way to remove this VirtualProfile permanently and why what is happening?  Thanks for any input.

  original title: Wireless Virtual Network profile

  Hello Flash4,

  Thank you for choosing Microsoft answers forum for Windows Vista.

  I suggest you go to your network card making and download / install the latest drivers.

  Also I suggest that you check your system for corrupted files. You use the tool (SFC.exe) System File Checker to check and repair corrupt system files. To do this, follow these steps:

  1. open an elevated command prompt.

  2. to do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
   
  3. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this information is useful.

  Thank you.

• connection problem with my wired network:

  My multimedia PC running Vista (SP2) and is connected (wired) via a switch, and powerline Gigabit connection directly to my BT Home Hub. In the last month or two, I noticed a problem that when the PC starts it does not connect to the internet. If I open the network folder, I gives me the message that, because I'm connected to multiple networks, I can't connect to the internet. If I open the folder 'show all networks' it completely shows a connection to the Local network, but the connection seems to be two network - home and just describing it as 'unidentified network '.

  If I then turn off the adapter and re-enable it, it will connect to the correct home network and so to the internet without any difficulty, but every time I restart the PC I have the same problem.

  The reason for which mmediate why it's a nuisance is that I can not receive Windows updates, because the update is disabled at startup if no internet connection is present and cannot (I think?) be restarted by restarting the PC (cue endless loop according to the above).

  So my question is how to remove this 'unidentified network' if ever it shows up as a separate in a list. I prefer not having to try to reinstall the whole damn OS, but am at my wits end otherwise!

  When you have changed the Norton, have you used this tool to remove it?
  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=English&CT=us

  Just give it a try and see if it helps.

• My laptop displays connect to WIFI but doesn't connect and lists of unidentified network

  I use Vista on my laptop and recently changed my Netgear WIFI bridge.  I added the bridge, but when I go to connect it says connected but not connecting, and lists of Undentified Network.  I googled this problem and cannot find a solution.

  Hello

  1. you get any error message?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also check out the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• Vista will not connect to a pc to network shared automatically at boot

  I tried many things for centuries and then abandoned (years)... now I try again.

  I have a 32 bit Vista pc and I always need to enter a user name and password to connect to another device on my network - I want it to connect automatically whenever the pc starts. I have a Windows 7 laptop and it connects to all devices in the network at startup (after I initially defined and registered the name of user and password). I want to give my kids my vista pc (they want a mac/ipad - I want they have a pc :-)) but I don't always have it connect automatically at all or network devices without the need for user names and passwords.

  Help / tell me this problem is now resolved?

  Thank you

  Hello, JHM.

  Try to turn off password protected sharing and check.

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2. click on the chevron to expand your current network profile.

  3. under password protected sharing, select the following:

  A. turn off password protected sharing

  4. click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  You can also try the suggestions from the link below for a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking/Wireless-credentials-requested-by-Vista/21e33cb7-BCC4-4c04-B41F-18bf92a9fd06

  Post back with the State.

• Recently installed vista update. I can no longer connect to my home wireless network.

  Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

  Hello

  Check the firewall it is maybe it has been reset.

  In general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi