Vista will not connect to a pc to network shared automatically at boot

Similar Questions

• Why Vista will not connect to the internet wherever I'm connected with my XP machine?

  Why my computer won't get online wherever I like Xp only

  Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

  Hello

  1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

  2 have you tried all of the suggestions of Fahimulla K?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista will not connect to Netgear WPA/WPA2 wireless router

  HP Presario laptop with Vista Home Premium. Added Service packs 1 & 2 in a timely and all upgrades of MS Vista through 8/11. Laptop does not work on the wireless network using a new Netgear N300 router with WPA/WPA2-PSK security.  Roommate has Windows 7 on his laptop and connects very well. I thought that these Service packs were supposed to solve the problem of Vista-WPA? My laptop connects fine with the router if I use an Ethernet cable directly between the laptop and the router. NetGear argues that it is a matter of MS Vista. I missed a special fix?  Any suggestions?

  Hello

  I suggest you to follow the steps in troubleshooting section and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can also read these articles and check if it helps to resolve the issue.

  View and connect to available wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-connect-to-available-wireless-networks

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  I hope this helps.

• Vista will not connect to WiFi automatically (but my iPhone works well!)

  After re-installing Vista window by the backup of my laptop LG drive, it is now impossible to automatically connect to the WiFi at home. Every time when I start the laptop (even of mode "sleep"), the network went & I have to choose WiFi home network once again, enter the golden key to restore the link.

  Once connected successfully, I have click the box "automatically connect to this network Bud future." It simply doesn't get it!

  I opened the network & don't Sharing Center--> WiFi Admin, there is no recorded inside the priority of connection WiFi network. However, I have my laptop connected to the WiFi at home, Office WiFi manually for time.

  Really hope someone can help out me!

  Hello
   
  Windows can be disable your network adapter to save power. Disable the power saving option in the network adapter properties. To do this, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of objects, expand network adapters.
  3. double-click on the sub element that means wireless network cards.
  4. click on the power management tab.
  5. clear all the options on the power management tab.
  6 apply the settings, and then restart the computer to check the difference.
   
  We recommend that you also download and install the latest driver for the card from the device manufacturer's Web site or system wireless.
   
  Download and install the latest service pack on the computer. See this article for more information: http://support.microsoft.com/kb/935222
   
  Check out these links for more information:
  1 solve problems, find wireless networks: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks
  2. wireless connection is periodically lost: http://support.microsoft.com/kb/814080
  3. wireless card WIRELESS drops every few minutes: http://support.microsoft.com/kb/814123
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Laptop will not connect to my home wireless network

  I've had my laptop for a few months and my home network wireless also. My laptop has always worked perfectly until last night, I was in the living room and my phone cut because it ran out of battery. I went to restart, and when I did, NO network could be found, and several others usually appear outside my home network. The wireless switch is turned on and I rebooted the computer several times, I ran the wizards and shooters of boredom, I started the wireless zero configuration, but nothing happens. everything he says is "wireless networks could not be found", and when I click on the message, a black box appears with a message saying "windows has encountered an illegal instruction. I don't know what to do. my laptop model is a Sony Vaio, but that's what I know. My ipod connects to the wireless perfectly, so I know its my laptop that needs fixing.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• XBox 360 will not connect to the secure WRT54GS network.

  Have you tried the suggestions we found in the forums for the connection manually and we continue getting a connection error. We rebooted the modem and the router as well, and the XBox 360 do not always connect. Any ideas how to make so that it can connect to our secure network without messing up the network that we have already had to reset and set again only a couple of weeks and don't want to go there again.

  It turns out that the problem was with the Xbox360 not its wireless sensor and refusing to install the correct programming for it. Had well cleared.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Vista will not update Vista or AVG, or the system will upload to sharing sites, such as BitComet (States 'State Listening Port unknown') [if connected DHT]

  Briefly: Even with the firewall, retrieve Vista and AVG will not connect, and downloads of some programmes not; connect for example, Limewire and BitComet will fail.

  Since you are doing behavior at high risk for the computer, your computer is probably infected.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• iPhone 7 will not connect to iTunes - request for the new version, but everything is up-to-date

  My new phone will not connect to iTunes on my computer windows laptop. It is said that it requires a newer version of iTunes but the latest version is all ready to date

  Is your "new version" iTunes 12.5.1.21? If this is not the case, your 'windows' laptop running Windows XP or Vista?

• Satellite L500 will not connect WIFI (Windows 7)

  I bought a Satellite L500-01W002 running windows 7 for my son for Christmas and it will not connect via WLAN. I use a Linksys WAG54g router/modem. It connects fine via LAN and can see the wireless network, but does not connect. I use WAP-personal security with pre shared key and TKIP. I even turned off all security on the router and he left as an open connection, and it will always just connect.

  I have two Compaq running does not connect Vista connected first to the wireless network, but this thing just. I have uninstalled/updated / re installed device drivers and still nothing, it will be not just connect wirelessly.

  Please someone help me! I know you're out there!

  See you soon

  Hello

  Hmmm strange
  First of all make an update of the BIOS, that this should be done if a newer version is available and you have any questions.

  You said you did a update check WLan if you used the latest version of the driver
  Here you will find the latest WLan driver versions:
  http://APS2.toshiba-tro.de/WLAN/

  You can also check WLan card settings in Device Manager-> properties-> advanced settings WLan card.
  The same WLan channel must be used for the local network and router WLan card.
  Check if the MAC address filtering is not enabled in the settings of the router.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• Network of shortcuts on the desktop will not connect to documents

  I have shortcuts on my Vista desktop to the word "Networking" & excel files that I use all the time.  When I click on the shortcut, my computer says that the file is not found.  If I go through 'my computer' to connect to the file, everything is fine.  This problem is also the problem that I posted on another forum with no response yet:

  Running Vista Business & Office 2007 on a Server 2003 domain.  When I access a 'network' (in Word or Excel) file, and then close the file, I'm unable to re - open the file... I get the message ' document is currently in use, try again later ".  Also, if I open a file, make changes and try to save it under the same name, I get the same message.  I have this problem until last Monday... like a switch has been turned upside down or something.  Any ideas?  I am connected to my workstation which is located in an area (I'm not directly connected to the domain).   This configuration running on all my machines Vista and do not have the problem on a different workstation.  Also the Quickbooks will not open the file of our networked society, workstation does not recognize the network as a QB file file.  Can someone HELP me with this.  My workstation, at this point, is essentially worthless.  I am unable to work on any network files.

  Hello cwil0710,

  Thank you for using the Microsoft Answers forum.  What antivirus do you use?  I suggest not including mapped drive in your virus scanner settings.  Did you install any software or update straight from the software before you start the meeting this problem?

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista will not download

  Help. My HP G50 will start but the Windows Vista will not download. I pressed the keys F 10 and 11 F. The memory is good. I backed up my files using the F 11 Save function. I tried to go back to an earlier date using System Restore, no results. Can reset the computer by default, there is work in the F 11 key and then recover my files. Do I need a recovery disk?

  Thanks for the reply. I made the. Backup of files Wizard. At the end she asks 'Please insert the USB key' - I suppose to download files on an external drive. Well I bought an external drive and connect it to the USB port, nothing happens. He said only: "no available drive. What should I do now. I did all the steps, according to HP said on their site of troubleshooting online and this is the last step. I will not buy an HP again. A friend recommends a Sony.