Connection to my local server? Help, please

Similar Questions

• iPhone is disabled connect to itunes HOW? Help, please.

  iPhone is disabled connect to itunes HOW? Help, please.

  lyndlebob wrote:

  iPhone is disabled connect to itunes HOW? Help, please.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• No internet connection, no dns servers.  Help, please!

  Hello

  I have an Apple Airport Extreme, I had used with internet of Cox for the past 2 years.  I recently moved and had to sign with Time Warner Cable.  I decided to buy my own modem this time, but were not able to configure my wireless network.  I can connect via my wireless hard connection ethernet (via the router) very well.  The led is green on the internet connection, but the flashing orange on the Airport Extreme.  He said that the problem is not internet connection (which is said to pass the modem which does not work) and not dns servers.  I can put in the dns servers (I've tried a few different things to include 8.8.8.8 and 8.8.8.4) who get rid of this message, but I still have the first internet connection.  My Version of Airport utility is 6.3.5, my modem is a Motorola Surfboard SB6141.

  Help, please!

  The Motorola modem will have need of a power extended down with Time Warner service in order to obtain a new valid IP address of the Server Time Warner... and... Ince you have changed providers and modem... AirPort Extreme will be reset to the factory settings and then set it up again, so that it "learn" the new settings he needs.

  If you decide you want to try our tips...

  Turning off the modem by pulling on the power cord to the back of the unit

  Unplug the co - ax cable and Ethernet cable so

  Let off for at least 30 minutes the modem... 60 would be better... more won't hurt

  While the modem is turned off... and with the AirPort Extreme on for a few minutes... Press and hold the reset button on the back of the airport for 7-8 seconds, then release and allow a minute for the airport restart to a slow status of amber light, flashes.

  Then, turn off the AirPort Extreme

  Once the modem has been turned off for at least 30 minutes, plug the co - ax cable and Ethernet from the modem into the WAN "O" on the AirPort Extreme port cable

  Turn on the modem and let it run for at least 10 minutes by itself

  Then, turn on the AirPort Extreme and let it run a few minutes

  Set up AirPort Extreme again and check to see if everything is operational

• Won't let me connect to Apple ID! Help, please!

  I can't connect to my Apple ID in my 5s or on the Internet. Rpet purc cannot be treated. Cannot update or download something from the App Store. Tried to change date of a coming year, changed my password to login and have my phone reatarted. Help, please! Won't reset if possible because my laptop packed and I can't back up not everything!

  Sorry for my auto correct fail here! PURC is lying be purchas and reatarted is supposed to say restarted

• My new helmet from QY8 does not connect to my iPad. Help, please.

  MY new QY8 is not tapered to my iPad. Help, please.

  Note:

  1before using the headset, please use the USB charging cable to charge everything first.

  2.pairing, press the power button on the headphones, you will see the flashing light blue-red, it will automatically switch mode pairing.

  3. If still cannot contact, please pluging in the charger cable to the headset Bluetooth, then connect to the USB port on the computer. To the loaded state, press the power button on the headphones until the red and blue lights flashing, remove the name of Bluetooth pairing. Finally, please contact your headset with headphones.

  4. make sure you turned on the bluetooth on your phone, model of research on this helmet.

  5. Select the Bluetooth model and click on connect. Enter the password or code 0000 if necessary.

  http://www.coulax.com/product/COULAX_V4_1_Bluetooth_Headphone_E257-4.html

• Firefox cannot connect to a local server subdomain if no available network connection.

  Hello

  I have a laptop that is configured as a local server using Apache. On this, I use "localhost" as the domain and have several subdomains.
  Now, if I have no network connection (to any other device) available on this laptop, and then with Firefox I am only able to access the domain 'localhost', but none of the subdomains and get a "Server not found" error on these. If I have a network connection, I can access the domain and subdomains with no problems.

  What it could be and what can I do to make it work without a network connection?
  I also tried with Opera and Chrome, and they can access subdomains anyway.
  Unfortunately however I prefer Firefox, then Yes... I am here.

  Kind regards
  Song

  Troubleshoot you your network connection in the Options menu? Firefox cannot load websites but other browsers may

  If internet not configured correctly, you may have a firewall set in place? http://www.aboutdebian.com/network.htm is what I used as a reference.

• Connect a wireless printer. Help please!

  I have an Epson (population 600) that was given to me to a friend without instructions and I can't connect to my computer, even though it shows my wireless network and I can't understand why. Help, please.

  I have an Epson (population 600) that was given to me to a friend without instructions and I can't connect to my computer, even though it shows my wireless network and I can't understand why. Help, please.

  James

  Instead of typing me instructions for you, download the manual here https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=110566&infoType=Doc

• speakers are connected but not detected! Help, please!

  I tried to plug in my sound souround in my lap. Well the wires accidentally touched something and then there is a loud noise, of course, we were surprised & so after numerous attempts, trying to have his surround for the computer, we couldn't hear anything so I gave up & just connect the speakers to the computer again in the tower. Well we couldn't hear anything now! I tried to watch a movie and NOT of HIS! We tried pluggin helmet & still nothing! & now even if the speakers are plugged and his saying that the speakers are not detected even if their plugged in! But if I check the sound I can see that the lines for the volume are moving up and down, but we can't hear anything! so I called a computer tech and he said that sometimes the sound is changed well I changed the sound and he was trying to detect the speakers, but it is still saying that nothing is plugged into the Speaker Jack when they are! Computer Savy not so much need help please! Blow something?

  Hello

  The steps in the article would solve that problem.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Also, try to use the same system on another computer sound and check if it works well.

  Let us know the status of the issue.

• Error with the connection to the local server LCC

  Hello!

  I tried to use the local PROVISIONING server and tried to make a request to LocalAuthenticator. To help you, I used 'LocalConnection' of the example apps SDK example. This example contains a comment:

  The application does not need a room url, store any data, or requires a password.
  

  I tried to do the same with Flex SDK 4.1:

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" 
                    xmlns:s="library://ns.adobe.com/flex/spark" 
                    xmlns:rtc="http://ns.adobe.com/rtc" 
                    xmlns:mx="library://ns.adobe.com/flex/mx" 
                    width="100%" height="100%">
       <fx:Declarations>
            <rtc:LocalAuthenticator id="auth" userName="User"/>
       </fx:Declarations>
       <rtc:ConnectSessionContainer authenticator="{this.auth}" width="100%" height="100%">
       </rtc:ConnectSessionContainer>
  </s:Application>
  

  but I got this error, each launch:

  TypeError: Error #1009: Cannot access a property or method of a null object reference.
  at com.adobe.rtc.util::URLParser$/parseURL()[/Users/arun/Work/aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/adobe/rtc/util/URLParser.as:96]
  at com.adobe.rtc.session.managers::SessionManagerLocalConnection/http://www.adobe.com/2006/connect/cocomo/session/internal::login()[/Users/arun/Work/aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/adobe/rtc/session/managers/SessionManagerLocalConnection.as:155]
  at com.adobe.rtc.session::ConnectSession/login()[/Users/arun/Work/aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/adobe/rtc/session/ConnectSession.as:489]
  at com.adobe.rtc.session::ConnectSessionContainer/commitProperties()[/Users/arun/Work/aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/adobe/rtc/session/ConnectSessionContainer.as:399]
  at mx.core::UIComponent/validateProperties()[E:\dev\4.x\frameworks\projects\framework\src\mx\core\UIComponent.as:7933]
  at mx.managers::LayoutManager/validateProperties()[E:\dev\4.x\frameworks\projects\framework\src\mx\managers\LayoutManager.as:572]
  at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framework\src\mx\managers\LayoutManager.as:700]
  at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects\framework\src\mx\managers\LayoutManager.as:1072]
  

  This error was fixed when I added the roomURL with full HTTP address to ConnectSessionContainer:

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" 
                    xmlns:s="library://ns.adobe.com/flex/spark" 
                    xmlns:rtc="http://ns.adobe.com/rtc" 
                    xmlns:mx="library://ns.adobe.com/flex/mx" 
                    width="100%" height="100%">
       <fx:Declarations>
            <rtc:LocalAuthenticator id="auth" userName="User"/>
       </fx:Declarations>
       <rtc:ConnectSessionContainer authenticator="{this.auth}" roomURL="http://localhost:8888/myaccount/myroom" width="100%" height="100%">
       </rtc:ConnectSessionContainer>
  </s:Application>
  

  So here's example outdated or bug in SDK or something else?

  Latest update LocalConnectionServer added support for several rooms.  So, Yes, at this point ConnectSessionContainer must include a roomURL.  For example, roomURL = "http://localhost/account/AnyArbitraryRoom".

  Good fishing!

  Nikola

• MacBook can not access 1300 HP connected to my local network, help?

  I have a HP LaserJet 1300 connected via a USB hub to a Macintosh G5 tower which is connected by Ethernet to my Telus Optik V1000H Actiontec modem/router. I read (I think on this forum) that some people have kept the modem Gateway 2 son they used before the upgrade of their service internet of Telus Optik and plugged into the router/modem Actiontec V1000H because he has better wireless capabilities. I did too, but now I don't know what modem/router my MacBook can access my network through now (if this is important).

  My new MacBook Pro running OS 10.8.2 accessing my wireless network but cannot access the HP LaserJet 1300. I downloaded and installed the v.2.11 driver of HP on the new MacBook, but when I try to set up the HP LaserJet 1300, I get the error message "Unable to download the software from the server at this time." The MacBook doesn't seem to know that I have already installed the printer driver v.2.11 on it.

  I tried to provide much information as possible here, but the line the bottom is I realized that my new MacBook Pro would be able to print to my HP LaserJet 1300 while the printer is connected to my network... but it can't. Can someone help me? I can't really afford a new printer.

  BTW - after reading some of the messages, I realize I can't have fax capability via my network, but is not serious. I've never used fax anyway.

  I'd appreciate it if someone could help me with some advice or point me to another conversation that could help me. Thank you!

  Hi, I am answering my own question so I can mark it as resolved. I continued to read and try different things, and finally (kind of by chance) I solved my problem. I'm not entirely sure how I did it, but I'll try to explain in case someone else is having similar problems.

  I downloaded the driver for printer HP 1300 (v.2.11) manually at least twice. I got it on the MacBook Pro, but the computer doesn't seem to be able to access it when I had not the 1300 HP directly connected via USB. It was confusing to me, especially when all the literature said to do a software update, if I was in trouble by doing the work of the printer.

  When I went to my printer preferences and tried to set up the HP 1300 with the printer not connected not directly to the MacBook Pro, it came as a printer, but I got a message saying that I couldn't download the software needed at this time there. I left this printer icon on my list of printers. (I knew that I already had the software but couldn't get the printer preferences to realize it is there).

  Then, I connected the HP 1300 directly on the MacBook via USB and the process repeated. This time a HP LaserJet 1300 @ my network was created in my list of printer and print driver was on the MacBook Pro. I chose the HP LaserJet 1300 @ my network version as my default printer. I have connected the printer to my network and was able to print wireless from the MacBook.

  I'll just let the other HP LaserJet 1300 icon on my list of printers in the case removing a problem. I don't know if I need it or not.

  Sorry if my explanation is poor. It would be a miracle if it helped anyone. I'm not very good in this stuff. I got lucky!

• I have a problem my Photoshop CC 2015 connection.  I have disconnected and connected but still fail.  Help, please. Thank you.

  It happened over and over again.  Please help me, thanks.

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• CC-Adobe Master Collection crashes when I connect to the internet.  Help, please.

  I don't have a permanent internet connection.  Any time I use an adobe application and connects to my computer, or disconnects, the wireless internet, application crashes, and I have to close it.  Can someone explain or help me find a way to prevent it from happening?

  Please try to upgrade creative cloud to the latest version:

  1. remove the cloud creative app.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• I can't get my Xbox to connect to my pc. Help, please!

  When I go to media sharing in windows media player a window appears and asks to 'close' or 'web help '. I click web help and follow all the steps until step 5. the part I "BOLD" and pointed out, this is where I'm stuck. It is there no ID security to access or to right-click

  1. Click Start.

  2. Type regedit in the search box and press ENTER.

  3. Locate the subkey HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME\ [security ID]. The text of the name of the folder security ID is long, consisting of alphanumeric characters that are broken upwards with dashes.

  4. Right-click the [security ID] folder, and then click Permissions.

  5. Make sure that your user account is listed as the owner of this subkey under the Security tab. If your account name is not listed, click Add and add to the list of owners. You must be logged on as administrator or member of the administrator group to complete this step.

  Hi Theo Quinones,.

  If you are unable to start when you connect your Xbox and PC media sharing, follow the steps described in this document.

  Let us know if that helps.

• Windows Home Server help please with the reader.

  I have a Windows Home server in my office that has a single hard drive in it.  I continue to be told to use the repair utility when I turn on my computer.  I bought a new drive for the server.  Now that I need help, it's how to duplicate the new disc of the former, is there a way to do it, or do I have to copy all the content on another machine on the network, and then install the operating system from the beginning.  I want to avoid the loss of data.  Any help is greatly appreciated.

  There are essentially two options available

  Place the new drive as the primary drive and keep the original as a secondary disk. Install WHS as a repair install and it should pick up original and index folders and re-create the tombstones for them. Then use the move to folder option in the console to make the folders shared the second partition of the disk. However, the indexing process is quite intensive and is perhaps not ideal with a line of demarcation for lack of drive.

  Alternative, remove the old drive and install the new, install WHS as a new facility that will create partitions C and D, including the new shared folders empty. Once the installation is finished, put the old one in as second drive or if this is not possible an external drive dock and then copy the contents of the old drive in the new. That would be my preferred option because it is perhaps easier and safer.

  There is no option to save and copy and settings users, even with a repair installation, you must manually recreate the users.