Similar Questions

• The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  Can someone bring me (Labview is new to me) in the right direction?

  John

  See attached the amendment. I made a change to my suggestions and possess the top-level VI for the null refnum. See if it makes sense.

• Could not connect more than 4 devices to time capsule

  Hello. I have the latest generation 3 TB Time Capsule. Since last week I can´t connect more than 4 devices to transport CANADA. Before that, I had 2 iPhones, iPad 1 air connection 2, an iMac, a macbook, the appleTV to generation 4 and a PS4. I tried a soft reset, a hard reset, a reset to factory settings, nothing works. Now I can´t connect the macbook and the PS4 more, even if all other devices are off. My iPhone 6s more is the only device that I can connect every time. I installed the last firmare update, but nothing has changed. I don.t know what else to do. Thanks in advance, Fabian

  When the Capsule is configured to act as a router, it will provide up to 50 connections for wireless devices and 150 for the wired devices. So, the first step in troubleshooting that I would say is to ensure that the time Capsule is set to act as the router for your network devices.

  To do this, use the following steps:

  • Open AirPort Utility on your main Mac computer (Finder > Applications > utilities > AirPort Utility)
  • Click on the image of the time Capsule
  • Click on edit in the window that appears
  • Click on the network at the top of the next window tab
  • Check the setting of the router mode know if it is configured as DHCP and NAT... or... If it is off (Bridge Mode).

  Please report it on the setting for the router Mode you see

• I have to get a new security code every time?

  I'm mystified by the new security code, six numbers, which must be entered in iTunes and here even every time I sign my Apple ID and password. I thought it was a done deal in obtaining a security code. I never if I receive a new security code to each time.

  This is part of the two verification step for Apple ID - Apple Support two-factor authentication

  If you cannot connect with two-step verification using your Apple ID

• Satellite A100-283 - does not start every time so I've created workaround

  Hey guys,.

  I have a problem with my A100-283. A few weeks ago the laptop just hung and I stopped it the hard way by removing just the battery (I know, bad idea, shouldn't have done...)

  After that it wouldn't start. Or through battery with the adapter is plugged. There was no more noise fan, or beep or anything like that, just a few LEDs + turn signals for a fraction of a second (capslock + numlock and some of the front LEDs).

  The next day I tried again - and it booted up fine, everything seemed to work again. But off it again the same problem appeared.
  Now there is no more guarantee on the A100, so I disassembled and welded in a new BIOS battery because I thought that this could be the problem.
  After reassembling, the problem remains.

  * But now I found a 'solution' to get the boot the laptop upward once again, *.
  It is just that it's really annoying to have to do this every time you start. Sometimes it always starts in the usual way, I think that it always depended on time, it has been turned off. The book has been extinguished, more lucky to start normally.

  But back to the workaround. I press the power button, the LEDs blink in no time. I continue to press the button, and after 5 seconds or more, the LEDs blink once (I think that the laptop lights somehow without any fan noise or anything, and if I continue to press on, it stops again). After that, I always do it by pressing the button for 10 seconds. Subsequently, I release her and push it again and it will start up just as it should. This method works 10 out of 10 times.

  Now, someone please tell me, is it possible to run the normal way?
  An update of the BIOS might help? My BIOS version is 2.00.

  Please do not come upwards with the support from Toshiba, as I already don't said, no guarantee, then it would probably be cheaper to buy just one more...

  Hope someone has an idea.

  Greetz

  Elenex

  > More book was off, more a chance to start normally
  Perhaps this problem could be related to overheating I mean if the temperature of parts would be more raised then usual, then such question could appear

  Unfortunately, but it's the only plausible explanation for me

  The issue could also well be linked to the motherboard failure, everything is possible

  But I see you don't want to hear about ASP and laptop technicians. Well in this case, you will have to diagnose the failure yourself

  Good luck

• Oracle Enterprise Manager 12 c SGD Server does not start every time that I reboot

  Hello

  appreciate your help and your advice on this matter.

  I have a box of Oracle VM configured with windows 2008 R2 Server OS.

  Installed Oracle Database 11g, created a database instance and set the requirements to install more Oracle Enterprise Manager 12 c.

  Every time when I reboot my Windows Server 2008, I have a very hard time from the SGD server

  do a few permutations and combinations for the start of services and get the login page of EM 12 c

  Below error is more frequently encountered:-

  E:\EnterpriseMgr\middleware\oms\BIN > emctl start SGD

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Service Windows what oraclemanagementserver_emgc_oms1_1 could not be started

  Management Server Oracle is down

  Please see E:/EnterpriseMgr/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for the details of the error

  E:\EnterpriseMgr\middleware\oms\BIN >

  In the services I checked for all the permutations, (start the service automatically / manually / automatic with time delay, etc.) but no permit far.

  Can someone Guide please on a solution to this challenge.

  Before shooting the emctl above of the admin command. Prompt BACK, I always make sure to check the database and Stanley are running - connect to it and query.

  Oracleagent12c1Agent - is also started.

  Oraclee_enterp ~ 1_middle ~ 1_omse_enterprisemgr_gc_inst_em_emgc_oms1ConfigurationManager - started

  Oraclee_enterp ~ 1_middle ~ 1_oracle ~ 2e_enterprisemgr_gc_inst_webtierih1ConfigurationManager - started

  OracleManagementServer_EMGC_OMS1_1-> fails to start after several attempts.

  Also, I tried to stop webtier and restart who.

  emctl stop who and then run emctl start SGD

  This model was used to work earlier, somehow its not working as on this day.

  Technically, I'm not a database / Enterprise Manager Administration background - but an Automation tester.

  Try to explore the Real Application Testing and Test data management n hide the Packs of Enterprise Manager 12 c.

  Kindly help

  Kind regards

  Nayan Jacob

  ()[email protected]( )

  Hey Xaheer,

  It worked this time!

  Thanks a lot for a helping hand... Appreciate your prompt response and help to...

  one last thing, can you please suggest what might happen some possible causes of this repeatedly.

  I was faced with this problem for quite some time now and all costs of Reboot Server me almost 30-45 minutes trying to start the EM to get em login screen.

  Can I set up these services to manual start and follow it each time?

  E:\EnterpriseMgr\middleware\oms\BIN>emctl stop who-force

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Stopping WebTier...

  WebTier successfully stopped

  Stop at Oracle Management Server...

  Error: error at shutdown SGD. Please check the error and logs

  Please check E:/EnterpriseMgr/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log to erro

  Details of r

  E:\EnterpriseMgr\middleware\oms\BIN>emctl start from SGD

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Service Windows what oraclemanagementserver_emgc_oms1_1 started successfully

  Management Server Oracle is in place

  E:\EnterpriseMgr\middleware\oms\BIN >

• How to connect a new MacBook in my time for the initial file transfer capsule

  How to connect a new MacBook to my existing time capsule to transfer files as part of the first implementation of my MacBook?

  You say that you have a new MacBook and that you have posted to the forum for the retina MacBook 12 "section, but your tag indicates that you have a MacBook Pro. Please specify.

• Windows does not start: every time I type my password it starts to load, but then it freezes

  Help, please!

  • my windows vista family premium does not pass the login window, every time I type my password it starts to load, but then it freezes
  • I already try to restart my computer, but it of not working, now will work in safe mode
  • WHAT CAN THE PROBLEM PLEASE HELP!

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• iPhoto should not run every time that a device is connected

  iPhoto should not start when I plug any device on a computer.   This should be controlled by the owner of the device on the device. And this should be a configurable feature on the computer.  There should be a check box that says "Click here to have the automatic iPhoto launch when you plug in a device."

  I don't want to plug my phone in a my computer from a friend to have all photos hot, I took with his girlfriend while he was out of popup city on his screen while my phone charges.

  I want this automatic launch when my girlfriend plug her phone on my computer to load so I can watch through his albums.

  I won't launch when my father its branch on my computer because the things a child should not see their parents.

  Already, this option exists in iPhoto and iTunes, but you can check it or uncheck the box only when other devices are connected. You can also do this via the image transfer application in your Applications folder.

• My EC1705 cricket broadband doesn't connect to the internet why doe I must activate the device every time, I must disconnect and reactivate every time. ?

  I have a desk top hp compaq presario with windows seven to have cricket broadband $40 monthly plan with a cricket EC1705

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the links and check out them.

  Method 1:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, your antivirus software is disabled.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I click on installation and they ask me to put my password. I recently sent a new password, but every time I get it... shakes the small box and do not it is supposed to do, is there a MAN who I could talk to?

  It is a question?

  It makes me crazy... I want to move the stupid adobe flash and it won't take my password...

  Please send me the name of a HUMAN being with their number so I can talk to someone...

  Remember that HUMANS don't you?

  Thank you

  Susan Evans

  [email protected]

  Hello

  It comes to the OS, Flash Player not of international protection, to request the password.  Please see what userid & password I need to install Flash Player? for more information.

  --

  Maria

• LoadVars does not work every time

  On both my pc offline using less 'test' Flash 8 and GOT 2.0 and on my server host unix.
  
  I wrote a php script that saves the name-value pairs of mysql (Yes! Finally - if you've read my other posts here!)
  photosynthesis = keyword12 & keyword13 = digestion & keywo rd14 = & keyword15 = & keyword16 = & keyword10 = keyword1 & keyword11 = organelle
  
  However, both in the flash using the 'test' environment and by running the swf file after download on my server
  http://www.4themax.com/education/regents_quest/quiz.swf
  
  Sometimes the LoadVars loads and decodes the name-value pairs, and other times does not.
  
  Any idea? I have not discovered anything in the search of this forum, nor in Google search.
  
  The LoadVars AS 2.0 is (which is in the main timeline):
  
  traces have been inserted for debugging the process of development of ACEs.
  
  SQLCache
  var my_lv:LoadVars = new LoadVars();
  my_lv. OnLoad = function (success: Boolean): Void {}
  If (success) {}
  
  Convert the variable string to properties
  my_lv. Decode (my_lv. ToString());
  trace (my_lv. ToString());
  Iterate over the properties in my_lv
  i = 0;
  (var prop in my_lv) {}
  
  trace (prop + "->" + my_lv [prop]);
  trace (i + "prop:"+ prop ");
  trace ("my_lv:" + my_lv [prop]);
  
  i ++ ;
  }
  
  t = i-2; used to search for items of total table because the decoding process fills the elements in reverse order
  trace (t);
  
  } else {}
  trace ("unable to load the external file.");
  }
  }
  my_lv. Load ("sqlcache.txt");
  SQLCache.txt
  
  SQLCache repetition
  var my_lv2:LoadVars = new LoadVars();
  my_lv2. OnLoad = function (success: Boolean): Void {}
  If (success) {}
  Convert the variable string to properties
  my_lv2. Decode (my_lv2. ToString());
  trace (my_lv. ToString());
  Iterate over the properties in my_lv
  i = 0;
  (var prop in my_lv2) {}
  trace (prop + "->" + my_lv [prop]);
  j = t - i;
  _Global.keywords [j] = my_lv2 [prop];
  trace (j + "" + _global.keywords [j]);
  trace (j + "my_lv:" + my_lv2 [prop]);
  
  i ++ ;
  }
  
  } else {}
  trace ("unable to load the external file.");
  }
  }
  my_lv2. Load ("sqlcache.txt");
  SQLCache.txt rehearsal

  I must say thank you G-o-d, but I must say also thank you very much, GWD. It works!

  You can see it at:
  http://www.4themax.com/education/regents_quest/quiz-home.html

  (You need not to connect to make it work. The connection info is to save the test for the diagnosis of the educational process).

  Note: I found that in the database mySQL, which becomes from a php script name-value pairs: a) the spaces become + and load Vars converted them to spaces b)? are not okay - I get

  each data table must have its own variable my_lv, but can keep prop and the same temparray variables for each table

  Thank you, thank you, thank you again!

• Filter plugin not loaded every time

  Hello

  I'm writing a plug-in filter for Photoshop, but I'm having a problem and have found no idea what is the cause.

  My plugin is sometimes loaded by photoshop and sometimes not. When it is not the case, remove the 8bf file and do a rebuild of the project works, without changing anything in the code. Sometimes I have to rebuild several times until the plugin is loaded, which is annoying...

  First, I checked the version of the sdk in the file caviggia was correct: Version {(latestFilterVersion << 16) | latestFilterSubVersion}, the entry point is the same as in the example to dissolve.

  I thought that photoshop may cache of plugins to load more quickly and that the new version is not seen (like when I'm building several times per minute), but I figured out that when a plugin is loaded only once, he is always recognized.

  One thing I noticed is that when my plugin is loaded, if I go to help > System Info..., there is no version number for my plugin, which can cause the problem but I can't find in the dissolve example this version 13 origin. So, I thought that perhaps the resource is not compiled correctly sometimes but it's strange and unlikely I think (maybe still worth mentioning).

  Does anyone have an idea / suggestion? It's been 2 days that I try to understand what is happening and he starts to drive me crazy...

  Hello

  You develop for Windows or Mac?

  I had a similar problem with Windows.  I found that I was not compile the files correct pipl (my .rc file was not including the correct pipl files).  Tidy up/remove all pipl files and make sure that 100%, you are including the correct pipl files.

  I also had a problem when switching between 32/64-bit versions.  For example, when you compile a 64-bit plug-in, VS2010 would sometimes force a rebuild of the file caviggia (generate .pipl for 64-bit), and would include the pipl 32bits (rest of the 32-bit version).  This means that my plugin would not appear in 64-bit Photoshop (because the pipl was invalid).  For me the solution is to remove the old pipl files before compiling, either being aware of do a reconstruction of pipl files during the passage of 32/64 bit builds.  I could also have created pipl distinct generations for 32/64-bit and of course reason were included.

  When the plug-in does not appear in Photoshop, remove all obvious bits (for example, the plugin paths), watch your DLL exports, then check the pipl.  I don't think it's the version number, but someone with more experience than I can point you in a better direction.

  Jamie

• "What's NEW" page opens every time you start FF

  Hello!

  After update to 9.0 (9.0.1) whenever FF starts, it opens the page "NEWS". I always close. But it looks like persisted!

  Please suggest what to do?

  Hi sigan,.

  You should look at this article on this specific issue and Preferences not savedarticle. It should give you all the information you need!

  If this does not work:

  1. Enter about: config in the address bar
  2. Click I'll be careful, I promise you if prompted
  3. In the filter field, type Startup
  4. Double click on startup.homepage_override_url
  5. Delete the text string, and then click OK
  6. Close Firefox and reopen the window to check that it worked.

  Hope this helps!

• No service, submenu cell does not start every time

  Hello

  I use my IPhone 5S for a long time, but a week ago something happened and now I can't use my phone because it says 'no service '.

  I tried to enter the submenu of the 'Cell' settings, but whenever I try to click on 'Cellular' he kicks me settings. As an application that has a problem and does not work. Re - download will fix most of the applications, but I don't know what to do about this "cell". I checked common failures when the phone says 'No. Service' that's why I chose to open a topic to discuss if I can fix or repair.

  Is this a common problem? Are there measures to solve this problem? I took my phone to a local store to see if the phone is repairable, he said he has never seen a problem, something like this before. I'll go to the Apple Store as soon as possible, but in the meantime, I would like to find if there is any solution out there that I could try.

  Thank you!

  Restore iOS on your phone using iTunes.

  If this resolves the problem, you have a hardware failure.