connection to Pro CS3 using Sony SDR-CX580

Similar Questions

• Unable to connect Satellite Pro TV using 4pin mini taken to a SCART

  I am trying to output movies from my laptop to a TV, but when I go to my Nividia Control Panel, it is not a TV option.
  I take TV out the plug to Mini DIN 4 pin for a RUMBLE to the converter SCART and then on television, but could not get anything on TV.

  Is that the debate in this link help?

  http://forums.nvidia.com/lofiversion/index.php?t41216.html

  The consensus seems to be to re - start with the TV attached. Most other considerations.

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• Sony STRDN1030 receiver, connected to the TV using the video components. But no Menu appearing

  Just got the new Sony STRDN 1030 and hung to the audio and video. Connected TV using component, because it is an option only with my Panasonic Plasma. But I am unable to get any video same menu to display on the TV. Help, please.

  Hi asingh98,

  You can display the GUI (Graphical User Interface) or to A menu screen / audio receiver on the TV not screen with an HDMI connection. Cannot display the GUI Menu if the receiver is connected to the TV using component cables.

  However, if there is no video signal at all from the receiver to the TV, then there may be a problem with the resolution of video output selected in the receiver. Select the appropriate video resolution and check if that helps.

  Ensure that you have selected the correct entry in the TV and the receiver.

  Connect devices to the receiver and check if the same problem occurs with other video cameras too.

  If the problem is not resolved, try using a different cable to connect the receiver to the TV. You can see the Sony connection guide for the instructions to set up the appropriate cable connection.

  http://eSupport.Sony.com/us/p/tutorial-display.pl?tut_id=438&MDL=STRDN1030

  If my post answered your question, please mark it as an "accepted Solution".

• Sony CX115E in Premiere Pro CS3

  Hi all

  I ordered a Sony CX115E, asking to Premiere Pro CS3 will recognize this camera? If this is not the case, when I downloaded my images on the hard drive, I'll be able to import images in first?

  Thank you.

  Unfortunately, you won't be able to import or edit images as its AVCHD.

  You'll either need to upgrade to CS5.5 or get of Cineform NeoScene.

  http://www.CineForm.com/NeoScene/

• Import of video files in Adobe Premiere Pro CS3

  I have a Sony Handycam DCR-SX63.  When I import movies on my PC (Vista), I took, they are. MPG files.  When I import these files in first Pro CS3 the video portion is important but the audio of this file does not work.  I read everything I can find and nothing seems to answer my question directly.  I tried an encoder to see if perhaps first does not accept. MPG files.  I converted to AVI file and tried to import and it gave me audio with no video.  I tried to open the new project with a dozen different settings offered by the first, but everyone I tried gave me the same result, when I tried to import my video file.

  Please, I beg you. Please, I beg you. Help, please.  I'm pulling my hair out.

  I appreciate any assistance.

  Thank you

  First... To work with audio files AC3 into Premiere CS3, copy the file ad2ac3dec.dll of the Encore CS3 directory creation directory

  Second... Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0

  What is a CODEC... a primer http://forums.adobe.com/thread/546811?tstart=0

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037?TSTART=0

  .

  A report with the codec of your file details, use the programs below

  .

  For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en

  .

  IF your files are MJPEG...

  MJPEG edit with Morgan or MainConcept http://www.morgan-multimedia.com/

  http://www.MainConcept.com/site/prosumer-products-4/Motion-JPEG-codec-785/information-797. HTML

• Modification of the AR in Premiere Pro CS3

  Hello

  I have another problem with my Premiere Pro CS3 on my MacBook, and the last time I posted another question here, I had a quick and helpful response.

  The last time it was to get the avi codecs goes on my MacBook, I have just converted the .mov files and it worked.

  The question is now that I need to know how to change the AR of a clip at random. I use 20 seconds each clips when I edit. "Back when I had a PC and edited with Sony Vegas, I just went to clip prefferences > and turned off ' maintain proportions"

  I would strongly appreciate that someone could explain to me how it's done.

  PS: AR = report l / h

  PS2: I need to change to all the clips that I import. they have different AR right now and I need to change this so that it fits the video preview. And when I am, I just want to use the settings that I prefer and make this way.

  Kind regards.

  Hello

  Try this...

  ----------------

  Image size: 576 x 432

  Sampling: 576

  Frame rate: 23.98

  Total duration: 00; 00; 26; 18

  Average rate: 158 KB/second

  Pixel format: 1.0

  --------------------

  Try this... should work well...

  Start a new project...

  Use the 'custom settings '.

  Choose to edit mode: "Desktop".

  Time Base: 23.97 fps

  Image size - enter 576 and 432

  Format of the pixels - 'Square pixels (1.0).

  Fields: "none - progressive scan.

  Display format: 24 fps timecode

  Audio sampling rate: '48 kHz.

  Audio timecode format: "audio samples".

  Now, when you import your video footage you shouldn't have a problem of proportions... must be...

  Stem

• I can't connect to my WiFi using windows xp sp3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  I can't connect to my WiFi using windows xp SP3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  On the side of my computer's mac, the internet works fine.
  I just want the computer to recognize my home network, but it's as if we want a modem connection.
  Ask what you need to know the specs.
  I do this to play Halo on my Mac.

  This is the problem (which I corrected).  It's simple, all you have to do is to switch to XP, insert your mac installation disc and follow installation bootcamp, with all the drivers for mac compatibility.  The wireless just popped up as active.

  I lost my, but this isn't a problem: just go to the apple Web site, use the express track, diagnose your problem and have a representative call you.  They answer in a few seconds.  Replacement CD is very cheap ($16-2011).  You can get the CD of requests for replacement, which is another $ 16, but it is not important; XP does not use it, only the operating system for the drivers.  Mine came very quickly, in just 2 days.

  Hope that answers questions from the Internet.

  Now to play online Halo with my FPS Pro controller! 8 D

• vFoglight, vOptimizer Pro and Pro bundle connection vRanger Pro

  As part of a new version of the virtual environment we planned to buy the Pro Bundle vEssentials (including vRanger Pro connection, vOptimizer Pro and Pro vFoglight).

  My question has to do with where they can be installed. We get three, brand new, host servers Dell PowerEdge R710 (48 GB of RAM, dual Xeon E5620, etc.), a single EqualLogic SAN (started by) and new switches HP ProCurve (config which is yet to be finalised). I'd love to be able to install software VizionCore on VM (link to a SQL 2005 VM server for the databases), but the system requirements I've read that it sounds like you need to use a physical hardware. We don't talk a great environment here (30-50 VM of current growth, possible more of course). We get the 8 taking VMware Enterprise Plus beam and vCenter Server standard. This means that we will be able to apply the license to a host of the fourth at any time that we see the need (would be an another R710 either identical to what we get as close as we can get).

  With all the power in the servers three hosts and the low (relatively) County VM, is there no real reason why we could not install the VizionCore on VM products? A virtual machine by product, or two on a single server and the third on his own or all three on a virtual machine... I could easily allocate four vCPU virtual machine and enough RAM (the advantage of having 48GB per host). I plan use DRS, so the virtual machine will be able to float between hosts as settings dictate. We are a partner of VMware first implementation of this project (I'll do a good part of the generation upwards before arriving at better use of their time), who are very familiar with the product (their recommendation is the reason why we intend to use it).

  So with the basin of DRS of 57.6 GHz (56xx series Xeons) and 144 GB of RAM to share, which will be more than enough? Maybe with the next version of VMware FT they bear more than a simple vCPU so we could use it for the virtual machine. Storage is not a problem, since we have more than 5 TB LUN (even after losing for RAID 50 and instant EQL).

  We are also looking to be able to check in to one of these system libraries at the place where I work. Is there something special I need to know in order to get to the operation too? I'm looking to have multiple levels of redundancy in our backup and restore process. I'm not comfortable with only having one or even two. I wish that the final level will be backups on tape that we can even send off site. Basically, going to the EQL snapshots serve daily (at least) keep 2 weeks. VRanger Pro of the connection will happen its backups as well, keep enough to restore back to at least two weeks later (or a month). If anyone needs a restore over a month back, we will be able to pull in back via the tape backup. Keep backups on tape for at least one year, with more to be the target. I realize that it is perhaps an exaggeration, but if I can provide a fast food of a file deleted, or bad VM, which would have otherwise been lost (which look us bad for customers and possible cost the company money) it will be all worth it. Depending on the amount of space used, I could even extend the clichés to the retention of 1 month, vRanger pro 3 to 6 month of connection and then perform backups on monthly bandwidth (although I still prefer to have fewer differences between the bands).

  I am interested in any suggestions...

  Yes, you can do it. As long as you do not use a SAN backup (with a virtual machine for vRanger of connection, you must make backups of direct-to-target on LAN - that is to say you can't 'virtualize' on a network SAN or iSCSI HBA connection). If you make the LAN-based backups (which should be more than sufficient, given the size of the environment that you're talking about), vRanger connection will work quite happily on a virtual machine. vFoglight is a different animal, however, which work like on a physical machine. However, it can be installed on a virtual machine as well. Keep in mind that vFoglight is resource hungry, so to minimize the impact this will have on the rest of your virtual machine environment, you can 'compartmentalize' as much as you could: ESX host resources (and make sure that the proposed Console of Service optimizations are in place.
  I can't speak to taking snapshots Equalogic, but if it puts the snapshot files in the virtual machine file systems, this could be problematic. Instead of using snapshots (of any type) as a form of backup (they are really not meant for that), instead, consider using your backup file/archive level restores to restore files/folders quickly without restoring a whole VM. It is my experience that these shots fouillisent the VMFS and cause problems during backup and restore. There is really a snapshot as temporary "fallback" point, as for example, when you install a hotfix. You turn on the server, install the hotfix. If the virtual machine comes back OK, remove the snapshot in a short period of time. Remember that snapshots are NOT "copies" of the virtual machine. These are files that track changes to flat files VMs. When you create they are small. Over time, they may reach huge proportions and really make life miserable for the admin. VM...

• How to set up Adobe Premiere Pro CS3 to read. MTS video files?

  How to set up Adobe Premiere Pro CS3 to read. MTS video files?

  CS3 does not support this format.  MTS/AVCHD support was not introduced before CS4.  Convert the files to something else.  You can use a free program called Handbrake to do.

• Premiere Pro CS3-"audio recording is not possible?

  I'm reinstalling Adobe Premiere Pro CS3 on a new computer, but getting the message across "his currently installed adapter driver does not support entry DirectSound.» Audio recording is not possible. I took note of comments on the problems of his fellow men elsewhere but have not seen anything which seems to solve this problem. Is the problem with the change in windows Vista environments to Windows 7 (on Dell Alienware i7) or I have to buy another sound card, or is it Premiere Pro CS3 here the rub? Thank you, eirrom.

  Yes, quite probably a compatibility issue. CS3 used an older model of compatibility, which long has been surpassed by newer versions of DX. However, still does backward compatible, so the problems you might have may depend on requiriung a specific driver, installing the legacy DirectX or as a minor, full support by changing some permissions on the system to allow the loading of drivers unsigned legacy and compatibility modes. It's a problem more complex that simply flipping a switch eitrher average. Check your device manager and then work your way through...

  Mylenium

• MOV files import trouble in first pro cs3 adobe

  Hello

  I just bought a Canon 60 d camera and I'm using adobe first pro cs3 for the first time.

  I tried to import my Canon 60 d MOV file footages, but it says that my files are not supported.

  I don't know what to do!

  Can someone help me?

  Thank you.

  Welcome to the forum.

  Full HD H.264 in a file format MOV of DSLRS is beyond the capabilities of CS3.

  I recommend using

  Square 5 - MPEG Streamclip video converter for Mac and Windows

  to convert the video to a lossless codec lossless as Avid DNxHD or Apple Photo-JPEG (75% quality value) nearby.  See if the converted files import and edit properly in CS3.

  Get the Avid codecs for free here:

  Download Avid QuickTime Codecs 2.1

  -Jeff

• Audio in Premiere Pro CS3 appear on a PC, not the other

  Hello world

  I am the network administrator for a school and we have a Digital Media Lab here using Adobe Creative Suite 3: Master Collection.  All systems here are running Windows XP Professional and on a Windows domain.  All users are standard users, without administrative rights for obvious reasons of security.  When I made originally of the deployment of the lab by running sysprep on a reference computer and use ghost to deploy the rest of the computers, I noticed a problem with Premiere Pro CS3 after deployment.  In this laboratory, none of the computers would capture video via firewire and built it based on capture in Adobe Premiere CS3.  I think I have a post about it on these forums that was never solved.  To work around this problem, I capture images for students in my office and transfer it on to their readers of network so that they can import it into Premiere Pro CS3 and edit images.

  Recently, the school bought a few HD cameras that record a built-in hard drive or an SDHC card.  The idea here is that the. MTS files could come from the camera to the computer running Premiere Pro CS3, media files in. Format MTS [1280 x 720] could be converted to help Free HD Converter from KoyoteSoft using the settings [preset] MPEG2, MPG2 as format, 1280 x 720 / / 16: 9 29.97 FPS, video rate 9000 and 224 audio bitrate, and then the media new files can be imported into Premiere Pro CS3 and edited using the HDV preset in Premiere Pro CS3 720p30.

  It works fine on my desktop computer.

  The problem is that if any student tries to import their images on a computer in the laboratory of digital media, the converted media files, exact same those who just imported in my Premiere Pro CS3 installation on a computer in my office with the same material as the computers in the lab of digital media, fail to import the audio.  I can see the video without any problem in the lab, but no audio layer is displayed.  If I click with the right button on the video file and choose open with > VLC or other media player, the media play with audio.  All audio and video codecs installed on my machine are also installed on the machines of digital media.  If I right click on Adobe Premiere Pro CS3 from a student on these computers account and choose Run as and use the account administrator, Premiere Pro CS3 does exactly the same thing, he can't yet see the audio.  Adobe CS3 is perfectly up-to-date on my desktop computer and all computers of digital media.

  Any help solving this would be greatly appreciated, spring break is coming here next week and I'll be here all week.  Hoping to get this resolved during this time so that students can edit their own films.  Again, importing video, audio is not.  No audio layer is displayed.

  Thank you!

  See if that helps... To work with audio files AC3 into Premiere CS3, copy the file ad2ac3dec.dll of the Encore CS3 directory creation directory