Microsoft fix Setup error + check the internet connection?

Similar Questions

• "Connection error. Check the Internet connection. »

  I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

  After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

  I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

  Good luck!

• HP LaserJet Professional P1606: HP Web Services Installation - connection error. Check the Internet connection.

  I try to activate the Services Web of HP but connection error. Check the Internet connection. .

  I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.

  I changed to DHCP as it does not work.

  I have a ZTE home modem router connected to the printer.

  The link below should help you.

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

  Kind regards

  Oliver

• "Connection error. Check the Internet connection. "When you try to enable Web Services on HP 1606dn

  Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.

  Operating system: Windows 7

  Thanks for the help,

  Howard

  Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw

  Thanks for trying to help.

  In my case, it did not help.

  I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.

  The key was the update of the firmware, I think.

  Walter

• Laserject 1606dn error, "connection error. Check the internet connection. "during activation ePrint

  I try to turn on my LJ 1606dn ePrint. I downloaded and installed the firmware and that is okay. I went to the Web Services tab to get the code to register the printer. When I click on 'Activate' in the ePrint section, I get the error, "connection error. Check the internet connection. "My connection network and internet are working properly. Am I missing something? I need to open a port on my router? Is there a special song, I need reciting under the full moon while sacrificing a live chicken?

  Thank you

  Joe

  jfusco,

  If you have an IP address manually, assigned to the printer:

  1. Enter IP address of the printer in the Web browser address bar and press ENTER.
  2. Go to the network tab and the IPv4 Configuration of the page.
  3. In the DNS server settings, the entry in your domain DNS servers or put IP of the router Address in the preferred DNS server and 0.0.0.0 or 8.8.8.8 in the section auxiliary DNS server and apply the changes.

• Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step is really for a solution online

  Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step really is to get an online solution and close the program, close the program. Signature of the problem:

  Problem event name: BEX

  Application name: Cloud.exe Creative

  Application version: 3.4.3.189

  The timestamp of the application: a 56702, 75

  The name of the module with the error: StackHash_0a9e

  Version of the module with the error: 0.0.0.0

  The module of time with error stamp: 00000000

  The exception of compensation: 00000000

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.768.2

  Language code: 1049

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  
  

  uninstall all cc on your computer.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  suspend your antivirus/antimalware

  Right-click on the file to install the desktop application, and then click "Run as Administrator".

• How can I check the internet connection?

  How can I check the internet connection after the launching application?

  Method or property with the value true or false.

  Thank you!

  You don't have to see the 2nd answer, discuss blackberry.system.hasDataCoverage

• Trial download - error message, check the internet connection

  I am trying to download a trail for Photoshop Elements, its application to connect and then when I try it gives me an error message to check my internet connection!

  I am logged - please help!

  Connect you or activation errors

  Mylenium

• RealConnect Agent Application Error preventing the Internet connection

  Our laptop using Windows Vista Home Permium.  When my son logs in to his account, he gets a window titled "Registration.exe Unable to Locate component."  The error message in this window is "the application failed to start because MFC42." DLL was not found.  Reinstalling the application may fix this problem. "When the popup is closed, a Microsoft Windows popup window opens with the message"Agent of RealConnect Application has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "Then it is not able to connect to the internet.  This problem started a couple of weeks with his login.  The connection that my husband & I use doesn't have this problem.  Help someone?  Thank you!

  Something you have from Windows is the origin of the problem. This isn't a component of Vista. Search on Google for "Agent RealConnect" shows that it is connected with Toshiba, Corel or DataLode. If you have a Toshiba, call their tech support. If you have Corel software, remove startup or uninstall it if you do not use. If none of these things is applicable, the connection of DataLode may indicate malware. Make sure that the computer is clean:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Manage startup:

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Instead, use the Services.

  Start Orb > Search box > type: services and when it appears in the area of results above, made a right click and choose 'run as administrator '. Confirm the elevation necessary.

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Unable to connect to internet guard telling me to check the internet connection then starts to run a diagnosis

  my PC guard loss of connection to the internet, it comes to check connection that cannot display this web page, but my connection is fine.

  Hi penny,

  -You use a wired connection or wireless?

  Follow the steps listed in the article mentioned below:

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

• Check the internet connection

  Hello everyone, I am applying, and I want to know when the phone is to have internet
  I tried with this code:

  Lo solucione with onError {}

  Thank you

• SWTOR: could not retrieve data fix. Please check the network connection. (208)

  OK, so my Launcher is not working now, I did not change my system or the folder of the game... except that... the new patch THEY come out. Now, it will not work. Any suggestions?

  I suggest that you check here, but you can also proceed as the system restore to a restore point before you tried to apply the patch.

  http://www.SWTOR.com/community/

• Download error! Impossible to reach on the adobe servers. Check your internet connection, firewall settings, and then try again

  Hi all

  Before writing this, I took the time to research online, but no luck.

  I decided to buy the photographers CC package. downloaded the installer and moved forward with the installation, allowing to connect my Adobe ID and got the error:

  "Download error! Impossible to reach on the adobe servers. Check your internet connection, firewall settings, and then try again. »

  
  

  I don't use any antivirus or firewall, and there is no redirection port to my internet connection.

  
  

  The software has been installed in a Mac Pro 2012, running the Mavericks 10.9.5. I completely uninstalled Installer used a CC cleaner App. Also went under the ~/Library/Application Support and ~/Library/Preferences moved these .plists for another clean installation but without success.

  
  

  Any help will be greatly appreciated.
  

  Thanks in advance for your help.

  
  
  

  Hello Mohit,

  Thanks for the link, but it was driving me nuts and takes me too long to understand. So, I saved all my work and formatted my hard drive with a new installation of Mac OS x.

  That solved the problem.

  Thank you all for your comments!

  Pedro

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• error "Unable to connect to GameSpy check your internet connection" when playing multiplayer on FSX.

  Original title:

  Multiplayer on FSX used to work, but now there is an error message that says: unable to connect to GameSpy check your internet connection. What should I do?

  I can connect to the local network, but not to the Internet (GameSpy).

  Hi Matt,

  Thanks for coming with your question in the Microsoft Community Forums.

  It is apparent from your message that you get an error "Could not connect to GameSpy check your internet connection" when playing multiplayer on FSX.

  You can try the steps in this link and check if that helps.

  Microsoft Games: Multiplayer troubleshoot

  http://support.Microsoft.com/kb/819836

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  You can check out the following link and check:

  Support for common issues of PC games

  http://support.Microsoft.com/ph/7745

  If the steps above could not solve the problem then it will be better to communicate with spy Game.

  View the results of the proposed measures. Please let us know if you need help with Windows in the future and we will be happy to help you.