connection to the database to slow down using OAS 10.1.2.3

Similar Questions

• Hide the username / password when connecting to the database

  I need to find a way to hide the user name / password when connecting to the database (via a script), or by encryption or any other method that hides this information when I connect to the database.

  I use Oracle 11 g.

  I tried with the portfolio method, but could not connect to the database of the error below, even the user name and password:

  ERROR:

  ORA-01017: invalid username / password; connection refused

  I plugged this way (after the cover configuration):

  sqlplus /@DB

  Please help me.

  Concerning

  Luiza

  Hi Luiza,

  Try to find out why the portfolio method does not work, check the implementation using ref 340559.1 Note

  Check also for example client and server versions / compatibility, evolves sec_case_sensitive_logon relevant parameter (as a test, because it must be true) etc.

  Greetings,

  Damage ten Monkshood

• slow down the connection to the database (Oracle enterprise 11g ed on RHEL 4)

  Hello
  I am facing problem when connecting to the database connection using sqlplus to my database the time consuming and it increases as the number of users connect to it increases. (although with a user of sqlplus scott/tiger@db takes 15 seconds and when simultaneously if multiple users try to connect then time required in connection is alsomost = number of user * 15 seconds.)
  
  same tnsping takes huge when 4-5 user tries to connect to the database.
  What should I do for debugging?

  Hello

  Try this:
  -Remove any nameserver entry in /etc/resolv.conf on server
  -Add name to the/etc/hosts machine like that
  127.0.0.1 localhost.localdomain localhost
  10.10.20.134 piorovm.localdomain piorovm

  Kind regards
  Marcin Przepiorowski
  http://oracleprof.blogspot.com/

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima

• Not able to connect to the database using SQLPLUS.

  Hello

  in the connection to the oracle in linux machine using sqlplus utility database I got following error.

  does anyone have an idea about this error?

  [oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 game may 15 10:22:50 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name:

  Enter the password:

  ERROR:

  ORA-00604: an error has occurred at the SQL level 1 recursive

  ORA-01653: unable to extend the table SYS. AUD$ 8 in the SYSTEM tablespace

  ORA-02002: error writing to the audit trail

  ORA-00604: an error has occurred at the SQL level 1 recursive

  ORA-01653: unable to extend the table SYS. AUD$ 8 in the SYSTEM tablespace

  7144389e-3944-4D5C-830e-46539d2d9971 wrote:

  I found the temporary solution. You can go through the following link where I got the idea.

  Oracle: 11g automatically audit | Buffer-Blog

  So has what "temporary" solution applied?

  And especially, what is the permanent solution will you.

  The most common solution, which goes back at least to when I started with v7.3, is to move the aud$ table out of the SYSTEM tables.  And with 11g, there is even a new package for the management of the audit trail, including a method for moving the table.  See DBMS_AUDIT_MGMT

• Connect to the database with SQL * more: is TNSNAMES. ORA used?

  Hello

  We have a local database called DEV01 and a copy of this database in a data center. To be able to connect to both databases, the TNSNAMES file. ORA

  on the local database server (not the one in the data center) has the following entries:

  / * Entry for the local database * /.

  DEV01_local, DEV01_local. WORLD =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = server01) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SID = DEV01)
  )
  )

  / * Entry for the database in the data center * /.

  DEV01, DEV01. WORLD =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = server02) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SID = DEV01)
  )
  )

  When I connect to the local database server, I set the Oracle environment as follows:

  export ORACLE_SID = DEV01

  export PATH=/opt/oracle/app/oracle/product/9.2.0/bin:$PATH

  export ORACLE_HOME=/opt/oracle/app/oracle/product/9.2.0

  Now I start SQL * more as follows:

  Oracle # > sqlplus user/user

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  SERVER01 DEV01

  As the SID is on two databases of the same (DEV01) I really don't understand how Oracle decides which of the SQL databases * more connects to.

  Is it the entry in the TNSNAMES file. ORA?

  But when I start SQL * more as follows:

  Oracle # > sqlplus user/user@DEV01_local

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  SERVER01 DEV01

  or

  Oracle # > sqlplus user/user@DEV01

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  DEV01 server02

  everything is as expected.

  Does anyone know who is the chosen database when just to connect with 'sqlplus user/user' (without the @DEV01 or @DEV01_local)?

  Any help will be appreciated!

  Rgds

  Jan

  When you connect to the local database that is connected to the server01, you need only specify the sid in the environment, in this case, Oracle tnsnames file to connect, actually uses, it uses any of the listener.  It uses what is called a connection needed.  It is purely a side connection server, and as long as the sid is located in the environment resolves to a database running on that server, you will be get connected.

  When you connect using the @connect_descriptor, like you second case, then Oracle will use the configured naming, including tnsnames, methods to solve the 'real' database  In this case, the auditor is required to create the connection to the database.

  John

• not able to connect to the database using the oracle instant client

  Hello
  
  I am not able to connect to the database using the instant oracle from my local PC client. They use to connect to the database files and sqlnet.ora files LDAP.ora. If I want to test the connection, I found this executable tns wasn't there, so not able to tnsping. So I'm not able to solve this problem.
  
  Please let me know if a solution for everything
  
  Client Oracle: oracle 10.2bFAT client 32-bit
  
  Platform: windows 7 64-bit
  
  Thank you
  Veera

  There is little that tnsping can do sqlplus can't.

  Instead of
  tnsping mydb.myorg.com
  Try
  sqlplus-s-L /@mydb.myorg.com
  or
  sqlplus-s-L user/[email protected]

  If you get
  ORA-12154: TNS: could not resolve the connect identifier specified
  you know that the customer could not resolve 'mydb.myorg.com '.

  If you get
  ORA-12541: TNS:no listener
  then "mydb.myorg.com" could be resolved, but there is no listener it running.

  If you get
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  then "mydb.myorg.com" could be solved, the listener is in place, and the database is out of service.

  If you get
  ORA-01017: name of user and password invalid. connection refused
  you know that 'mydb.myorg.com' has been successfully resolved, and the database is running.

  If you want more details, such as how and what "mydb.myorg.com" is resolved, turn the tracking by adding the following to "sqlnet.ora:
  TRACE_LEVEL_CLIENT = ADMIN
  TRACE_DIRECTORY_CLIENT = C:\TEMP (a writable directory)

  Then you will find lines like this in the trace file:

  -THE INFORMATION SOURCE PARAMETER FOLLOWS-
  Attempt to load system pfile source C:\oracle\network\admin\sqlnet.ora
  Source of the setting successfully loaded

  Attempt to load the local pfile source C:\Dokumente und Einstellungen\lanadvall\sqlnet.ora
  The parameter source has not been loaded.

  This shows you which configuration files are read, followed by the settings real read.

  nnfgrne: will read if path adapters
  nnfgrne: switching adapter LDAP

  He's now looking for LDAP name resolution.

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVSSL = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  These are LDAP servers, he is trying.

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  nnfgrne: query fails, the leap to the next map

  Did not work. Try the other adapters:

  nnfgrne: switching adapter EZCONNECT

  snlinGetAddrInfo: name resolution failed for test64.test

  No luck.

  If the resolution is approved, it will look like this:

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVERS = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  niotns: the call to address: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dbserver.host.myorg.com) (PORT = 1521)) (CONNECT_DATA = (SID = DBNAME) (CID = (PROGRAM = C:\Oracle\ora1020\bin\sqlplus.exe)(HOST=pc247596)(USER=lanadvall)))

  Yours,
  Laurenz Albe

• Not able to connect to the database using OS othenticated user.

  Hi team,
  
  We use HP UX servers, recently we pass the passive node to active (cluster OS) after that we are not able to connect to the database using OS authenticated the user, but I am able to conenct by user oracle sunig... !
  
  Please suggest me.
  
  Thank you
  Maurel.

  Please copy - paste the screen indicating the connection attempt with the authentication of the BONE and the error message.

• Latest Vista updates have picked up my use of the internet and slowed down my system

  Last week, I had several automatic updates. In the meantime, updates have been loading on my computer all landed and froze. After the updates, I'll have a terrible time in AOL. The program has slowed down and often gives me an error message that the system is not responding. I contacted AOL who gave me many suggestions that I follow, but I still have problems (more my overall system is slow now). Says to contact Microsoft. It may be a problem with acceleration. I don't have these problems until the updates installed this week.

  Now my system restore no longer works. I can't go back to before the updates. What can I do?

  Hi andrewgpig,

  Thank you for writing to Microsoft answers Community Forums.

  Possible cause would be that updates might conflict with other programs on the computer. Also could have damaged some system files on the computer.

  I suggest to try in safe mode and check the performance of the pc first.

  To start the computer in safe mode, do in the link below

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If it works fine in safe mode, then find the program that is in conflict. The link below shows you how to do a clean boot

  http://support.Microsoft.com/kb/331796

  If the steps above fail. Try to do a scan sfc

  Try to run a SFC scan, to do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  I hope this helps. .

  Let us know if this doesn't work or if you need further assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer

• Connect to the database using oracle forms

  Hello experts,
  
  I have installed on my computer, Oracle Developer Suite 10 g (10.1.2.0.2) (including the forms and Designer) and after that I installed Oracle Database 11 g Express Edition (11.2) Beta.
  both facilities are on the same (local) computer.
  When I chose to connect to the database, he wonder about the data connection to the database:
  username, password and database.
  I'm sure that the user name and password are correct, because I have no problem to connect directly to the database (via sql * more).
  could you please tell me what I should write in the field database? I trid XE but it dose not help.
  Can I need to make some changes manully so that it works?
  Please note that the operating system is Windows XP service pack 3.
  
  Thank you for your help.
  
  Published by: user1818173 on 28/08/2011 01:43

  Hello
  Have you changed the TNSNAMES file. File of the ORA for DS? You must add the TNS for DS TNSNAMES. ORA file.
  Go to $DB_Default_Home$ \netword\admin and open the TNSNAMES file. ORA file in Notepad. Copy the entry tns where you connect from SQL * more.
  Go to $DS_Default_Home$ \netword\admin and open the TNSNAMES file. ORA file in Notepad. Paste the tns entry that you copied.
  Now try to connect generator of form.
  Kind regards
  Qasim Jules

• problem connecting to the database using dbclient

  Can someone help to solve the following question
  
  The following error occurred when connecting to the database when connecting dbclient to the database on linux from windows
  . TNS dbclient names has been configured with the SID and IP address of the machine from database
  
  ERROR:
  ORA-12560: TNS:protocol adapter error

  Could you share your tnsnames.ora file

  And refer to this topic

  http://forums.Oracle.com/forums/thread.jspa?MessageID=9142058�

• Inability to connect to the database

  OS: 8.1 Pro 32-bit Windows

  Java: 7u45 (build 1.7.0_45 - b18)
  

  
  

  Install Oracle 11g.

  When you open localhost:1158 / em - the message:

  "The database is down. Please specify the credentials of the host to access the restart and database diagnostic tools. »

  After entering the command:

  emctl status dbconsole

  It is reported that Oracle Enterprise Manager 11 g is running.

  When you type:

  emctl status agent

  indicates that the agent works.

  
  

  
  

  All Oracle, except OracleJobScheduler, running services.

  
  

  SYSMAN, DBSNMP, SYSTEM and SYS are not blocked

  
  

  File Emoms.trc when connecting to the database:

  http://rghost.NET/50166676

  
  

  Folder with alter.log:

  http://rghost.net/50165784

  
  

  
  

  In listener.ora replaced

  
  

  SID_LIST_LISTENER =

  () = SID_LIST

  () SID_DESC =

  () SID_NAME = CLRExtProc( )

  () ORACLE_HOME = C:\app\TorchTT\product\11 2. . 0\dbhome_1( )

  () PROGRAM = extproc( )

  () ENVS = "EXTPROC_DLLS =ONLY:. C:\app\TorchTT\product\11. ("2. 0\dbhome_1\bin\oraclr11. dll" ()

  )

  )

  
  

  on

  SID_LIST_LISTENER =

  () = SID_LIST

  () SID_DESC =

  () SID_NAME = TorchTTDB( )

  () GLOBAL_DBNAME = TorchTTDB( )

  () ORACLE_HOME = C:\app\TorchTT\product\11 2. . 0\dbhome_1( )

  () PROGRAM = extproc( )

  () ENVS = "EXTPROC_DLLS =ONLY:. C:\app\TorchTT\product\11. ("2. 0\dbhome_1\bin\oraclr11. dll" ()

  )

  )

  
  

  did not help.

  
  

  
  

  Subsequently decided to not wait and reset the database.

  
  

  Immediately after the reinstallation of page https://localhost:1158 / em / successfully opened.

  
  

  Only when the request to add a table to the executed successfully, but Developer SQL database query in the list of tables is not displayed, update the list and restart the program did not help. However, when re - create the table with the same name appears on the error you have already created a table with a given name.

  
  

  After restarting the computer database is available again.

  Can you please how to fix?

  
  Translated by Google Translate.

  If I'm right, the problem is resolved.

  Each of the reinstall previous, of the database at the beginning of the message appeared on the system configuration is not in line with the minimum requirements. Earlier the same error is indicated as a result of the use of new versions of Java, as Oracle 11 g support officially more young and therefore do not attach importance to this post.

  In the end, I decided once more to reinstall the basis data, but in compatibility mode for Windows 7. So - when you run the error to install an incorrect configuration does not appear. And after that the installation of the base is available, restart the machine - the base is again available.

• Unable to connect to the database because the log file is deleted

  Greetings,
  Recently I cleaned a bit unnecessary files on my PC and did not know that an oracle log file has been deleted. That's why when I try to connect to the database I get the following error:
  
  ORA-01033: ORACLE initialization or shutting
  
  Plu SQL, I try closing and start up the database I know what type of file that has been deleted. So, how can I solve the problem?
  
  Kind regards
  Valerie
  

  SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 18 11:46:46 2009
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  SQL> startup
  ORA-01031: insufficient privileges
  SQL> connect firefly
  Enter password:
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in progress
  
  
  SQL> connect sys/manager as sysdba
  Connected.
  SQL> shutdown immediate;
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  146800640 bytes
  Fixed Size                  1286220 bytes
  Variable Size              92278708 bytes
  Database Buffers           50331648 bytes
  Redo Buffers                2904064 bytes
  Database mounted.
  ORA-00313: open failed for members of log group 2 of thread 1
  ORA-00312: online log 2 thread 1:
  'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
  ORA-27041: unable to open file
  OSD-04002: unable to open file
  O/S-Error: (OS 2) The system cannot find the file specified.
  
  
  SQL>

  You must enable ARCHIVELOG mode and use the backup provided to make (or calendar) Script backups of a database of the XE.

  http://download.Oracle.com/docs/CD/B25329_01/doc/admin.102/b25107/backrest.htm#i1004902

  As you have not a
  Directory 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE', you can check to see if the backup was created here!

  Hemant K Collette

  Published by: Hemant K grapple on September 18, 2009 19:00

• DBAdapter: Impossible to catch "the database host is down" scenario as a flaw

  Hello
  
  I use a DBAdapter and try to test the scenario when the database is out of service.
  
  I have attached a tote within reach with the "systematically" to the DBAdapter and since he did not work an explicit fault Manager Catch so trying to catch a "remoteFault" with the data from the fault to be captured in a variable 'RuntimeFault' to type 'RuntimeFaultMessage '.
  
  The problem is that my fault handlers intercept not defects, and I get an errors of ORABPEL-11622/08033/05002 as pasted below:
  -----
  < 2009-04-15 18:47:39, 824 > < INFO > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - connection using JCA Pool - size = < unbounded > max
  < 2009-04-15 18:47:39, 824 > < WARN > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - search for "ist/DB/Unknown" JNDI has no reason to: eis/DB/Unknown not found
  < 2009-04-15 18:47:39, 824 > < INFO > < default.collaxa.cube.ws > < AdapterFramework::Outbound > as unable to locate the JCA resource adapter deployed to "ist/DB/Unknown", then will attempt to instantiate ManagedConnectionFactory oracle.tip.adapter.db.DBManagedConnectionFactory directly.
  < 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.ws > < database Adapter::Outbound > < oracle.tip.adapter.db.DBManagedConnectionFactory acquireSession > cannot generate the TopLink Session
  
  < 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - could not invoke operation "BPEL_DBLogger" against the "data adapter" due to:
  ORABPEL-11622
  Could not create/access the TopLink Session.
  This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
  See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
  Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002.
  
  < 2009-04-15 18:48, 808 > < logging INFO level > < default.collaxa.cube.ws > < AdapterFramework::Outbound > complete change for Logger "default.collaxa.cube.ws" Debug to see the error stack
  < 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - backward JCA LocalTransaction
  09/04/15 18:48 - __callback exception Caught class com.collaxa.cube.ws.WebServiceException
  < 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube > < BaseCubeSessionBean::logError > error when calling bean cube"delivery": EJB Transaction error.
  Exception of EJB that happened during the call to the partner.
  Please check service partners.
  
  ORABPEL-08033
  
  EJB Transaction error.
  Exception of EJB that happened during the call to the partner.
  Please check service partners.
  
  at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:576)
  at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:416)
  at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:222)
  at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:736)
  at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:371)
  at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
  at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
  at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)
  at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
  at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
  at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269)
  at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5244)
  at com.collaxa.cube.engine.CubeEngine.callbackPerformer(CubeEngine.java:1917)
  at com.collaxa.cube.engine.delivery.DeliveryHelper.callbackPerformer(DeliveryHelper.java:788)
  at com.collaxa.cube.engine.delivery.DeliveryService.handleCallback(DeliveryService.java:778)
  at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleCallback(CubeDeliveryBean.java:369)
  at sun.reflect.GeneratedMethodAccessor96.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.security.auth.Subject.doAs(Subject.java:396)
  at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
  at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
  at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
  at CubeDeliveryBean_LocalProxy_4bin6i8.handleCallback (unknown Source)
  at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessageHandler.handle(CallbackDeliveryMessageHandler.java:49)
  at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
  at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
  at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
  at sun.reflect.GeneratedMethodAccessor32.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
  at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
  at WorkerBean_EndPointProxy_4bin6i8.onMessage (unknown Source)
  at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
  at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
  at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
  at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:814)
  at java.lang.Thread.run(Thread.java:595)
  Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: file:/D:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_ReinitiateTask_1.0_7d6f64cf5f538ea8399318bcb3b1bb5d.tmp/BPEL_DBLogger.wsdl [BPEL_DBLogger_ptt::BPEL_DBLogger (InputParameters)] - SISM JCA Execute of 'BPEL_DBLogger' failed due to the operation: could not create/access the TopLink Session.
  This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
  ; nested exception is:
  ORABPEL-11622
  Could not create/access the TopLink Session.
  This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
  See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
  Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002.
  
  at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:631)
  at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:726)
  at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:425)
  ... more than 57
  Caused by: ORABPEL-11622
  Could not create/access the TopLink Session.
  This session is used to connect to the data store. [Caused by: IO exception: the network adapter could not establish the connection]
  See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
  Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002.
  
  at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:362)
  at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:171)
  at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:598)
  at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:351)
  at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:222)
  at oracle.tip.adapter.db.DBInteraction.executeStoredProcedure(DBInteraction.java:971)
  at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:218)
  at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:480)
  ... more than 59
  Caused by: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
  Inner exception: java.sql.SQLException: IO exception: the network adapter could not establish the connectionError Code: 17002
  at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:276)
  at oracle.tip.adapter.db.toplinkext.Oc4jDefaultConnector.connect(Oc4jDefaultConnector.java:101)
  at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
  at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:197)
  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:220)
  at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:273)
  at oracle.toplink.threetier.ConnectionPool.buildConnection(ConnectionPool.java:82)
  at oracle.toplink.threetier.ConnectionPool.startUp(ConnectionPool.java:304)
  at oracle.toplink.threetier.ServerSession.connect(ServerSession.java:435)
  at oracle.toplink.publicinterface.DatabaseSession.login(DatabaseSession.java:503)
  at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:858)
  at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:373)
  ... 64 more
  Caused by: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:287)
  at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
  to oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:430)
  to oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:151)
  at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
  at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
  at java.sql.DriverManager.getConnection(DriverManager.java:525)
  at java.sql.DriverManager.getConnection(DriverManager.java:140)
  at oracle.tip.adapter.db.toplinkext.Oc4jDefaultConnector.connect(Oc4jDefaultConnector.java:71)
  ... more than 74
  < 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.engine.dispatch > < DispatchHelper::handleMessage > to not handle the message
  java.sql.SQLException: IO exception: the network adapter could not establish the connection
  at com.collaxa.cube.ejb.impl.BaseCubeSessionBean.checkIfFatalConnectionError(BaseCubeSessionBean.java:196)
  at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleCallback(CubeDeliveryBean.java:383)
  at sun.reflect.GeneratedMethodAccessor96.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.security.auth.Subject.doAs(Subject.java:396)
  at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
  at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
  at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
  at CubeDeliveryBean_LocalProxy_4bin6i8.handleCallback (unknown Source)
  at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessageHandler.handle(CallbackDeliveryMessageHandler.java:49)
  at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
  at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
  at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
  at sun.reflect.GeneratedMethodAccessor32.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
  at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
  at WorkerBean_EndPointProxy_4bin6i8.onMessage (unknown Source)
  at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
  at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
  at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
  at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:814)
  at java.lang.Thread.run(Thread.java:595)
  Caused by: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:287)
  at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
  to oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:430)
  to oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:151)
  at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
  at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
  at java.sql.DriverManager.getConnection(DriverManager.java:525)
  at java.sql.DriverManager.getConnection(DriverManager.java:140)
  at oracle.tip.adapter.db.toplinkext.Oc4jDefaultConnector.connect(Oc4jDefaultConnector.java:71)
  at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
  at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:197)
  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:220)
  at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:273)
  at oracle.toplink.threetier.ConnectionPool.buildConnection(ConnectionPool.java:82)
  at oracle.toplink.threetier.ConnectionPool.startUp(ConnectionPool.java:304)
  at oracle.toplink.threetier.ServerSession.connect(ServerSession.java:435)
  at oracle.toplink.publicinterface.DatabaseSession.login(DatabaseSession.java:503)
  at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:858)
  at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:373)
  at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:351)
  at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:222)
  at oracle.tip.adapter.db.DBInteraction.executeStoredProcedure(DBInteraction.java:971)
  at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:218)
  at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:480)
  at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:726)
  at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:425)
  at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:416)
  at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:222)
  at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:736)
  at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:371)
  at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
  at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
  at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)
  at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
  at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
  at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269)
  at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5244)
  at com.collaxa.cube.engine.CubeEngine.callbackPerformer(CubeEngine.java:1917)
  at com.collaxa.cube.engine.delivery.DeliveryHelper.callbackPerformer(DeliveryHelper.java:788)
  at com.collaxa.cube.engine.delivery.DeliveryService.handleCallback(DeliveryService.java:778)
  at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleCallback(CubeDeliveryBean.java:369)
  ... more than 42
  < 2009-04-15 18:48, 808 > < ERROR > < default.collaxa.cube.engine.dispatch > < BaseScheduledWorker::process > is not to manage the exception ORABPEL-05002 message sending...
  
  Handle error message.
  An exception occurred while trying to process the message 'com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessage '; the exception: IO exception: the network adapter could not establish the connection
  
  ORABPEL-05002
  
  Handle error message.
  An exception occurred while trying to process the message 'com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessage '; the exception: IO exception: the network adapter could not establish the connection
  
  at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:171)
  at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
  at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
  at sun.reflect.GeneratedMethodAccessor32.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
  at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
  at WorkerBean_EndPointProxy_4bin6i8.onMessage (unknown Source)
  at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
  at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
  at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
  at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:814)
  at java.lang.Thread.run(Thread.java:595)
  -----
  
  To simulate that my database is down, my DBAdapter wsdl I put my < jca:address > section as:
  -----
  < jca:address location = ' ist/DB/Unknown"UIConnectionName ="BPEL_DB_Server ".
  ManagedConnectionFactory = "oracle.tip.adapter.db.DBManagedConnectionFactory"
  MCF. DriverClassName = "oracle.jdbc.OracleDriver"
  MCF. PlatformClassName = "oracle.toplink.internal.databaseaccess.Oracle9Platform"
  MCF. ConnectionString="jdbc:oracle:thin:@172.16.205.120:1522:ETGLIT".
  MCF. UserName = "owf_mgr_temp".
  MCF. Password = "867BD34C5AE6EF60BEC0F888655A72920D60DCB1D74A4B78" / >
  -----
  
  Since then, there is no location "eis/DB/Unknown" Bpel would use other attributes defined here to connect to the database. But the IP database I specified here is incorrect to make sure that DBAdapter fails to connect.
  
  Now, I received the error "Network adapter could not establish the connection" but it appears in my logs to opmn with the above pasted stack trace. Why am I unable to catch this problem of connectivity as a bpelx:remoteFault in my capture explicit or CatchAll?
  
  Help, please!
  
  Kind regards
  Ravi

  I am surprised as well. I see you're on 10.1.3.1. There are a lot of problems with the DB adapter in this version. I suggest either install the following hotfixes or upgrade to 10.1.3.3 or 10.1.3.4 (recommended)

  What happens to the BPEL process, do go to manual recovery? Or just fail. Are you sure that the Tote was beyond the scope of the DB adapter. Have you implemented several scopes?

  see you soon
  James

  2617419
  5877231
  5838073
  5841736
  5905744
  5742242
  5729652
  5724766
  5664594
  5965376
  5672007
  6033824
  5758956
  5876231
  5900308
  5915792
  5473225
  5853207
  5990764
  5669155
  5149744

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian