Connection to the Service of PAPI process when you use LDAP

We have Oracle BPM 10.3 put in place with the help of LDAP as a directory for the participants. To connect to the service of process PAPI we want to use a system id which is a user but not put in place in LDAP. How can we do this? Y at - it a special group of role or security necessary for this user, i.e. should the privileges of the user Admin process?

Hello
Yes, this will definitely need a password, which is the same as the password that you will use to connect to the system (workspace BPM or the external application that makes calls PAPI).

The way we have implemented is: we have a J2EE application (app A) external which makes use of calls papi, deployed on weblogic. The BPM engine is also deployed on the same weblogic domain. The BPM application can then be configured to be used in mode Single Sign On and deployed. In such a scenario when a user types in the url for the workspace BPM, the login page for app has will be shown.

The Protocol LDAP that you use to configure the BPM directory also lets you create a security provider in the field of the safety of the weblogic (using the weblogic console). This will ensure that any application (in this case Soft A) deployed on weblogic will use this users/groups to this LDAP for authentication purpose. This completes the installation, and we need A app and BPM application both authenticating to the same LDAP protocol and application of BPM is set up in SSO mode.

When the user comes to the login page of the appA, the corresponding servlet can store the password in the session and then to the app worklist page (if you wish). BPM login page not coming, since BPM can authenticate the user based on the login in the appA. Later (let us say that during the execution of the external task; when the appA servlet is called from BPM), you can use the password stored in the session to create the object papisession for the logged in user.

I recently started a blog, where I have an example of PAPI (as it is one of the issues preferred users BPM). You can check

http://satinderblogs.blogspot.com/2009_11_01_archive.html

HTH
Simart

Tags: Fusion Middleware

Similar Questions

  • Impossible to activate the services on VMKernel adapter when you use a custom TCP/IP stack

    Hello

    Very strange error.

    Unable to activate services on VMKernel adapter when you use a custom TCP/IP stack.

    Added custom stack by using this command: esxcli network ip netstack add n = "10 GB"

    Using the GUI to add the adapter to a normal vswitch.   By choosing the new battery, all services are grayed out.  (at time of pick their all first on the stack on the other, then change to the new battery, it shows in preview before pressing the finish)

    running on vcenter build camera 5.5 1440531

    ESX 5.5.0 1439689 (VSAN release)

    No idea what could be the problem?

    Stack additional TCP/IP is not fully functional to 5.5 for vmkernal services.

    Note this:

    Documentation Centre of vSphere 5.5

    You can activate services for the default on the host computer TCP/IP stack.

  • I use Windows Vista and continually get the message that "my connection to the server has been terminated" when you use Windows Mail! __

    When do my mail on Windows mail very often get the message "your connection to the server has been terminated...". ». I called technical support with my ISP but also had a tech from my ISP came home, but no problems have been found with my ADSL service. It seems to me that there must be a problem with the server... suggestions?

    Thank you

    Thanks Cody,

    I downloaded Windows Live Mail successfully, but when I connect to my e-mail I always get Windows Mail screen I always had. Is that all I have to do to "transfer" to Windows Live Mail.  Can I remove the Windows Mail program...

    Brian

  • Select an exact size of the image to be copied when you use the "Marquee" tool

    How can I select an exact size of the image to be copied when you use the "marquee"?...

    I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

    is there a way that you can easily select the exact size of 14,00 x 12,00?...

    Please advise...

    see you soon,

    Hi wong168,

    You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

    If you right click in the entry boxes there are the list of measured values.

  • How to remove all the old e-mail addresses when you use change as new?

    When you use as new edit on a mail, previous winners are listed in the address field. How to delete these addresses all at once rather than having to delete them one at a time?

    I don't know of anyway to remove them all at once, but there is remove an add-on that places a button next to each address, which is easier to use that repeatedly do select + and + DELETE. You just keep clicking the small X in the address above.

    https://addons.Mozilla.org/en-us/Thunderbird/addon/address-close-button/?src=API

  • Unlocked blackBerry Smartphones Software Update has not received the AT & T brand PRIVATE when you use a non - AT & T SIM card

    Dear whom it may concern,

    I saw one of the support forum of Blackberry Web site on "software update, not received the AT & T unlocked brand PRIVATE when you use a non - AT & T SIM card". How can I receive the OTA update in the notification bar?

    Now, my OS is Mashmallow 6.01 build No.. AAF355 (June 1, 2016) or do I have to update (auto loadder) my Priv to AAG873 in order to get the direct OTA from Blackberry in the future.

    Thank you

    Good questions. I can speculate only at this stage. I guess that since it is updated by BB, they use a revision update for all devices to facilitate management. AT & T updates their different, since they have different methods of approval (Note T-mobile even updated as unlocked devices). Unless you want to get specific version of AT & T that could fix something that the other version does not work, I'd wait for the OTA. I did three refills of OS because I couldn't OTA of AT & T, and they take a lot of time. Take the time then to restore and to reconfigure all the settings you had before. Not funny.

    To be more precise questions. Depends on you, but for me, would be updated via OTA only now that it's available. Yes, if you want auto charger, use AT & t. even as before, wait for OTA, unless you have a specific automotive need load the operating system.

  • Get the error the Service does not work when you try to update

    Original title: Dell Inspiron 1545 model

    My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

    addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

    Hello

    1. What is the error message right on the service does not work?

    2. were there any changes (hardware or software) to the computer before the show?

    Perform the steps in the link and check.

    The problems with the installation of updates (Windows Vista)

    Hope this information helps.

  • The call for a process when you click the link export v4.1.1.00.23

    Version 4.1.1.00.23

    Hello

    I have 6 Classic reports on the page.

    Each report has link active Export.

    I need to insert the set of results that is questioned about the report in a table. Each report is independent of each other.

    Each report has its own table to insert the result set in.

    My thought was to call a process Page when a user has clicked on the link export, but the process is not known. I put: apex_application.g_print_success_message: = 'Insert '; in the process of the Page to tell if the process was called. I think that the process is not called because the page is not sent when the user clicks on the link to the export. It is purely a guess.

    What I tried:

    Working with just the first report, I created a page element hidden in the region of the report and created a calculation before heading for the region ID.

    SELECT region_id
FROM   apex_application_page_regions
WHERE  application_id = :APP_ID AND
       page_id = :APP_PAGE_ID AND
       region_name = 'My First Report Region'

    Then on the wording of the link for the link export in the attributes report I put:

    < a href = "f? "p = & APP_ID.:124: & SESSION.: FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us" > Export CSV - my first data reports < /a >

    The Condition, that I used in the process of the Page is:

    Point process: submit now - after calculations and Validations

    PL/SQL -: REQUEST = FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us

    of course, that didn't work so I tried it - "FLOW_EXCEL_OUTPUT_R" | & P124_ESSCSD_REGION_ID. | "_en - us

    and I tried it - "FLOW_EXCEL_OUTPUT_R" | : P124_ESSCSD_REGION_ID | "_en - us

    None of which worked.

    SO, can someone help me with a solution called a process to insert the data in the report, when the Export link is called?

    What information can I I provide/clarify?

    Thank you

    Joe

    Knew that I had seen cela somewhere... Try to watch this blog of Martin D: D'Souza Giffy Martin on Oracle APEX: APEX report download recorder

    Thank you

    Tony Miller
    Software LuvMuffin
    Ruckersville, WILL

  • Application of the terms of registration parent when you use START WITH / CONNECT BY FRONT

    Hello

    I'm trying to understand how to apply when only apparent conditions when using records to begin with... connect by prior logic.

    Here is an example...

    Table:
    CREATE TABLE TEMP_BTL
(
  TRANS_ID               NUMBER(22,20),
  PARENT_TRANS_ID  NUMBER(22,20),
  TYPE_ID                 NUMBER,
  STATUS_ID             NUMBER
);
    Records:
    SET DEFINE OFF;
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (1, NULL, 1, 2);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (2, 1, 2, 1);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (3, 2, 3, 4);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (4, 3, 4, 3);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (5, NULL, 2, 3);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (6, 5, 4, 1);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (7, 6, 5, 3);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (8, 7, 6, 2);
Insert into TEMP_BTL
   (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
 Values
   (9, NULL, 1, 3);
    If my query rules are:

    PARENT_TRANS_ID IS NULL = parent_record

    I have to limit my results so that only considered hierarchical groups are groups that record the type_id of the parent = 1 (single parent record limit to this condition, no children)

    Then I need to find the max (trans_id) of each subset for groups where the parent record type_id = 1

    Thus, according to the data from the example above, would be results that I would look:

    TRANS_ID = 1 group parent, I don't want to return trans_id = 4

    I would not return anything for the trans_id = 5 parent group because the type_id of that parent is not 1

    For trans_id 9, is the parent and the only record for this group so it is type_id = 1 I'm not going back 9 as the max (trans_id) for this game.

    And then, eventually, I'll limit my results to the place where the max id batch trans = 3.

    Any help is appreciated...

    Thank you
    Christine

    Hi, Christine.

    cad0227 wrote:
    Hello

    I'm trying to understand how to apply when only apparent conditions when using records to begin with... connect by prior logic.

    In your example of data 2 is the parent of 3, and 3 is the parent of 4.
    Use 'root' to describe nodes (for example, 1 and 5) that have no parents.

    Here is an example...

    Table:

    CREATE TABLE TEMP_BTL ...

    Thank you for including CREATE TABLE and INSERT statements. It's very useful!

    If my query rules are:

    PARENT_TRANS_ID IS NULL = parent_record

    I have to limit my results so that only considered hierarchical groups are groups that record the type_id of the parent = 1 (single parent record limit to this condition, no children)

    The START WITH clause is where to put the conditions that apply only to the roots.

    Then I need to find the max (trans_id) of each subset for groups where the parent record type_id = 1

    Thus, according to the data from the example above, would be results that I would look:

    TRANS_ID = 1 group parent, I don't want to return trans_id = 4

    I would not return anything for the trans_id = 5 parent group because the type_id of that parent is not 1

    For trans_id 9, is the parent and the only record for this group so it is type_id = 1 I'm not going back 9 as the max (trans_id) for this game.

    And then, eventually, I'll limit my results to the place where the max id batch trans = 3.

    Any help is appreciated...

    It would be useful that you reported the exact output desired. Describing the output is great, especially when it is as clear as your description, but describe the results, in addition to, not instead not to display.
    Here are the results you want?

    `  ROOT_ID MAX_TRANS_ID
---------- ------------
         1            4
         9            9

    Here's a way to get them:

    WITH     got_root_id     AS
(
     SELECT     trans_id
     ,     CONNECT_BY_ROOT trans_id          AS root_id
     FROM     temp_btl
     WHERE     status_id     = 3
     START WITH     type_id          = 1
                 AND     parent_trans_id     IS NULL
     CONNECT BY     parent_trans_id     = PRIOR trans_id
)
SELECT       root_id
,       MAX (trans_id)     AS max_trans_id
FROM       got_root_id
GROUP BY  root_id
;

    Published by: Frank Kulash on 13 August 2012 13:58

  • Connection to the server would not check when you configure Outlook Express with Charter Web Mail

    Hello! I call on my Outlook Express is installed on my Windows XP Professional. I need assistance with the configuration of Outlook Express with my Charter Web Mail. Charter, I called and they helped me with the setup but I'm stuck on the last part and it gave me an error on the server. The "connection to the server don't check not" and the Charter was not able to help me through, and they said it's a Microsoft Issue. I need some help here. Please help me! Thank you!

    See here: http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=1241

    There are step by step instructions.

    Steve

  • Photosmart 6510: By default, Photosmart 6510 printer Photo paper tray when you use e printing and airprint

    How can I get the default tray for main tray in electronic printing and air instead of photo tray? Everything is set to main tray by using the Printer Wizard. No problem when you print a document directly from the computer.

    Thanks in advance

    The HP ePrint app is available on the Apple Store. When you open the app and are looking for a document to print, you should see a few options to select the paper settings and other options before you click Print to print the document.

  • How can I fix the cannot find server error when you use Bing?

    When I want to use Bing as a search engine, I always get an error message cannot find server. When the connection problem is diagnosed, the result is that there is not a problem with the connection. I get the same thing when I use the Google search engine. OT most of the time I'm successful search with Ask. I use Windows XP.

    Hi MineMN,

    ·         Did you do changes on the computer before the show?

    ·         What web browser do you use?

    If you are using Internet Explorer, follow these methods.

    Method 1: Follow the steps in the article.

    "Internet Explorer cannot display the webpage" error in Internet Explorer

    Method 2: If you still face the same problem reset the TCP/IP stack.

    How to reset the Protocol Internet (TCP/IP)

    Method 3: Reset the proxy server. Follow these steps:

    (a) click Start, run, type cmd , and then press enter.

    (b) type the following commands at the command prompt and press enter after each command:

    proxycfg d

    proxycfg-u

  • The step of INSTALLATION fails when you use IAM Deployment Wizard

    Hello

    I am making an enterprise deployment by using the IDMLCM tool by following the Enterprise for Oracle Identity and Access Management Deployment Guide (http://docs.oracle.com/cd/E40329_01/doc.1112/e48618/toc.htm).

    I completed the PREVERIFY step on each node (iamhost1, iamhost2, webhost1, webhost2) successfully but did not step in the INSTALLATION when you run the following command on the first node (iamhost1):

    runIAMDeployment.sh - $IDMLCM_HOME/provisioning/bin/provisioning.rsp - ignoreSysPrereqs true - target responsefile install

    I can't understand the reason according to the runIAMDeployment - install.log.

    Help, please.

    Thank you and best regards.

    Here is the log:

    ……………

    [2014-08 - 07T 07: 30:06.545 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] start the installation process for Identity Management Suite...

    [2014-08 - 07T 07: 30:06.594 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 07:30:06 CST! TARGET = install! CATEGORY = BUILD_ERROR! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. TASK = canPhaseStartOnThisHost! TaskID = orchestration.orchestration.BUILD_ERROR. Install.canPhaseStartOnThisHost! MESSAGE = installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install. ! DETAIL = installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install. ! BUILDFILE=/U02/Oracle/middleware/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML! LINENUMBER = 97!

    [2014-08 - 07T 07: 30:06.596 + 08:00] [runIAMDeployment - install] [ERROR] [FAPROV-00298] [runIAMDeployment - install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] year Error occurred: []

    The installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install.

    at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.checkIfPhaseCanStartOnCurrentHost(CanPhaseStartOnThisHostTask.java:190)

    at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.checkIfPhaseCanStart(CanPhaseStartOnThisHostTask.java:218)

    at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.eval(CanPhaseStartOnThisHostTask.java:73)

    at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.executeTask(CanPhaseStartOnThisHostTask.java:61)

    at oracle.apps.fnd.provisioning.ant.taskdefs.BaseProvisioningTask.execute(BaseProvisioningTask.java:106)

    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)

    at sun.reflect.GeneratedMethodAccessor1.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)

    at org.apache.tools.ant.Task.perform(Task.java:348)

    at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)

    at net.sf.antcontrib.logic.IfTask.execute(IfTask.java:217)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)

    at org.apache.tools.ant.TaskAdapter.execute(TaskAdapter.java:154)

    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)

    at sun.reflect.GeneratedMethodAccessor1.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)

    at org.apache.tools.ant.Task.perform(Task.java:348)

    at org.apache.tools.ant.Target.execute(Target.java:357)

    at org.apache.tools.ant.Target.performTasks(Target.java:385)

    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)

    at org.apache.tools.ant.Project.executeTarget(Project.java:1307)

    at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)

    at org.apache.tools.ant.Project.executeTargets(Project.java:1191)

    at org.apache.tools.ant.Main.runBuild(Main.java:758)

    at org.apache.tools.ant.Main.startAnt(Main.java:218)

    at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)

    at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)

    ]]

    [2014-08 - 07T 07: 30:06.663 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 07:30:06 CST! TARGET = listener-journal-status-in-error! CATEGORY = install! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. TASK = install! TaskID = orchestration.orchestration.None.Listener - journal-status-in - error.NONE! MESSAGE = ERROR! DETAIL = installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install. ! BUILDFILE=/U02/Oracle/middleware/Oracle_IDMLCM1/provisioning/provisioning-build/listener-build.XML! LINENUMBER = 65!

    [2014-08 - 07T 07: 30:06.664 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] the installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install.

    [2014-08 - 07T 07: 30:06.670 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] BUILD FAILED []

    /U02/Oracle/middleware/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:97: the installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install.

    ………………

    $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

    I made some change and do it again and this time I got the error "installation OUD failed.". Any suggestion?

    --------------------

    [2014-08 - 07T 12: 44:52.652 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] Starting Oracle Universal Installer...

    [2014-08 - 07T 12: 44:52.655 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]

    [2014-08 - 07T 12: 44:52.656 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] check if the CPU speed is greater than 300 MHz.    Real MHz 2693 spent

    [2014-08 - 07T 12: 44:52.657 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] space Temp checking: must be greater than 150 MB.   Real 1502 MB passed

    [2014-08 - 07T 12: 44:52.658 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] checking swap space: 511 MB of available space, 512 MB required.    Failure of < < < <

    [2014-08 - 07T 12: 44:52.659 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]

    [2014-08 - 07T 12: 44:52.661 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] some requirement checks failed. You must meet these conditions before

    [2014-08 - 07T 12: 44:52.662 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]

    [2014-08 - 07T 12: 44:52.663 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] to continue installation.

    [2014-08 - 07T 12: 44:52.665 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]

    [2014-08 - 07T 12: 44:52.666 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]

    [2014-08 - 07T 12: 44:52.667 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] output Oracle Universal Installer, journal for this session can be found at /u02/oracle/product/11.1.2.2.0/idmtop/products/dir/oraInventory/logs/installActions2014-08-07_12-44-52PM.log

    [2014-08 - 07T 12: 44:52.694 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 12:44:52 CST! TARGET = listener-journal-status-in-error! Category = Run.Oui! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. Task = Run.Oui! TaskID = orchestration.orchestration.None.Listener - journal-status-in - error.NONE! MESSAGE = ERROR! DETAIL = exec returned: 255! BUILDFILE=/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/provisioning-build/listener-build.XML! LINENUMBER = 65!

    [2014-08 - 07T 12: 44:52.696 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] exec returned: 255

    [2014-08 - 07T 12: 44:52.702 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 12:44:52 CST! TARGET = install idm! CATEGORY = OUD! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. TASK = installation OUD! TaskID = orchestration.orchestration.None.Install - idm.NONE! MESSAGE =! DETAIL = OUD installation does not succeed. ! BUILDFILE=/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/provisioning-build/common-Misc-build.XML! LINENUMBER = 108!

    [2014-08 - 07T 12: 44:52.708 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] OUD installation is unsuccessful.

    [2014-08 - 07T 12: 44:52.719 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] BUILD FAILED []

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:102: the following error occurred during the execution of this line:

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:416: the following error occurred during the execution of this line:

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:528: the following error occurred during the execution of this line:

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:530: the following error occurred during the execution of this line:

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:541: the following error occurred during the execution of this line:

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/Oud-build.XML:62: the following error occurred during the execution of this line:

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/Oud-build.XML:519: the following error occurred during the execution of this line:

    /U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/provisioning-build/common-Misc-build.XML:110: installation of the OUD is unsuccessful.

    Total duration: 31 seconds

    ]]

    [2014-08 - 07T 12: 44:52.742 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01281] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] token of guard of phase of creation in closing bracket.

    [2014-08 - 07T 12: 44:52.744 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01073] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] [arg: u02/oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/phaseguards/install-iamhost1-FAILED.grd] changing permissions recursively for u02/oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/phaseguards/install-iamhost1-FAILED.grd. This may take some time...

    [2014-08 - 07T 12: 44:52.748 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01074] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] Permissons changed.

    [2014-08 - 07T 12: 44:52.749 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01197] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] wrote guard phase file /u02/oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/phaseguards/install-iamhost1-FAILED.grd

    Apparently, the OUD Installer fails on:

    Check the swap space: 511 MB of available space, 512 MB required.  Failed

    Check your swapspace and try again.

  • ThinApps tests during capture and build process when you use Horizon Workspace

    Hello

    We are about to make a client implementation of Horizon Workspace with about 40 ThinApps we still have for packing

    When we package apps, during the NBC process we will include the Horizon in the package.ini parameters

    AppID
    HorizonOrgUrl

    VersionID


    After that we capture the app that we will then have a test PC to test the ThinApp to ensure it works before it is added to the repository ThinApp and having created rights. However the ThinApp will not work because there is no entry of right in the workspace for even and the application displays the error message.


    How Pack applications and test them before you configure the workspace? Or can't we? It must create all the ThinApps, download them to the repository, wait for the workspace to scan them, create rights, then test?


    Also when we update an application using the AppID same and incrementing the VersionID value, the tester will be able to test this on their PC to test before upload to the repository Horizon ThinApp or the user will get the same error message horizon? We don't want to postpone until it has been tested. Or is it possible to use the old method of entire update where we keep the same .exe entry point and just update the dat a.1 file? This will break the Horizon integration?


    Thank you

    This allows ease of Management Horizon Workspace does not change behavior of the package. This is why I would recommend to run tests without activating the Horizon Workspace manageability. There is no way to run a ThinApp package with Horizon Workspace manageability enabled without Horizon Agent installed locally and having the right.

    Once the tests have been completed, you can enable manageability Horizon workspace by changing the package.ini or by running relink.exe - h.

    Same thing about the update of test blocks. Check the functionality without manageability Horizon active workspace and turn manageability Horizon Workspace.

  • HP 5740: Printer HP 5740 paper range when you use eprint on my phone, but works very well with my wife's phone

    Hello

    I just bought a range of printer HP 5740 and my wife and I downloaded EPrint for our iPhones (5 and 6).  Since the photo tray only takes paper 4 x 6 , we need load paper 5 x 7 in the main tray.  I was able to load paper and change the settings so that the main tray had paper photo 5 x 7 and was able to print multiple photos using the phone to my wife (5 c).  Then I tried to print photos a little more of my phone (6) and the printer told me he was on paper.  I tried to reload several times and making sure that it has been set up correctly, but it won't work.  However, he worked again with the phone to my wife and I don't have the out of paper message.  Any suggestions?

    Thank you!

    Martin

    Hello

    Please try

    a open app HPePrint,

    (b) select the photo to print from your phone

    (c) support on edit (top right).

    d press paper then the size,

    (e), select 5 x 7,

    (f) Source of touch,

    (g) touch the main tray (not Auto Select, using automatic selection, he will use the Photo tray as default value).

    (h) touch done

    Now you can print of the main tray.

    Kind regards.

Maybe you are looking for