Connections of loading at startup

Similar Questions

• A drive mapped on P to P does not load at startup upward.

  My question is similar, but may have a different answer.  I have a peer-to-peer network and my computer plays the main role.  In the morning he gets turned on first so that other computers can charge the player.  Some of my programs require that the mapped drive is the same on all computers like me.  The problem is that when I turn on my computer, it does not read the drive mapped on himself and he listed as disconnected.  I then manually go and plug.  Again, it is annoying more then anything.  Any suggestions?

  Hi Loreman,

   

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that mapped drive does not load at startup to the top.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  Follow the methods and mark the question below:

  Method 1:

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Method 2:

   

  Drive mapped to the network connection may be lost:

  http://support.Microsoft.com/kb/297684

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

   

• load at startup in the web.xml file

  Hello
  
  I know not to load at startup in servlet
  When this servlet is called, it is called automatically, or to call
  
  Give me an example

  tag may appear inside the tag in web.xml and tells the container of web on this particular servlet loading. If load at startup is not specified then container load a particular servlet when he feels necessary is more likely when the first request for this servlet. According to the specifications of Java enterprise the following rules apply:

  1. to load at startup value > 0, servlet with least number will be loaded first when the web application is deployed or when the server starts. Servlets with a higher number of load-on-startup after loaded as servlets with a smaller number have been loaded.
  2. If the value of is the same for two servlets, then they will be loaded in the order in which they are declared within the web.xml file.
  3. If is 0 or negative, or there is no evidence for any servlet then this servlet will be responsible when the container considers necessary to load it.

  suitable for the servlet that performs tedious work. for example, to create a pool of database connections, prepare a few application environment etc. In web applications based ATG have usually entered us for NucleusServlet to load at startup as 1 that's why NucleusServlet is loaded on startup of the server resulting in the ATG to start services.

• How to limit the programs that load at startup?

  How to prevent apps will load at startup?

  One place to check: Apple menu > System Preferences > users and groups > click the user in the left sidebar, then the login at the top items.

• iPhone 6 connected to load not - turn on the apple logo screen comes on and then directly back to the exit.

  I got my iPhone 6 during just over 1 year, I plugged it in to charge this morning and it lights up, it didn't he go on the apple logo and then turns off again. She does again and again that connected to load while but is not on. someone knows what's the problem? It will be under warranty? I can't use my phone at all, I left that he plugged for more than an hour and he just got really hot and kept the logo screen then off over and over again up to what I gave him upward and not trendy.

  You should get the verified device by visiting an Apple store or Apple authorized service next to your site provider, this issue seems to be hardware related.

  Apple iPhone - contact Support - support

  Find an Apple authorized service provider

• Why dial-up connections keep loading when I'm already in line several times?

  original title: dial-up connections

  Why dial-up connections keep loading when I'm already in line several times?

  Why dial-up connections keep loading when I'm already in line several times?

  A possible scenario would be to have an ADSL PPPoE connection for your primary link and a secondary dial-up link.  So if a DNS lookup fails because the PPPoE connection is not completely connected to the Internet Windows would try to use the link to remote access instead of doing whatever it was necessary to wait for the first to work.  Even after the PPPoE connection is fully established, it would be always possible to have no research to trigger a second test on the remote access link.  A solution would be to delete or disable the link to remote access.  In any case an average minimum of change the symptom would be to change the connections settings never compose...

  FYI

  Robert Aldwinckle
  ---

• CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  Not a matter of Microsoft/Windows.

  http://answers.Microsoft.com/en-us/search/search?searchterm=CHKUPD&CurrentScope.ForumName=Windows&CurrentScope.filter=windows_xp-files&askingquestion=false

• Programtries to load at startup that I'm not sure.

  A startup name program: (5BB4B692-C213-DAD1-E621-571CE305F4CO), file: c:\documents and settings\myname\application data\faagge\cuavt.exe tries to load at startup. What kind of program is this and should I allow this program use or continue to block?

  On Friday, February 11, 2011 16:11:58 + 0000, BenXP333 wrote:

  A startup name program: (5BB4B692-C213-DAD1-E621-571CE305F4CO), file: c:\documents and settings\myname\application data\faagge\cuavt.exe tries to load at startup. What kind of program is this and should I allow this program use or continue to block?

  A search on the web for cuavt.exe can't find anything. This means that he almost
  Certainly a malware infection (either a virus or another type of)
  malicious software). It is very common for malware to generate names at random, since
  the author does not want you to know anything by a web site
  image search.

  Ken Blake (MS-MVP)

• How to stop to load at startup of indexing

  I use Win XP Pro, and I want to stop indexing load at startup in my system tray.  I somehow it started about 2-3 weeks ago and now I want to put an end to its use.

  Thanks for any help.

  If it's the windows index service you can turn it off via the admin tools Control Panel.

   

  If it's a third party indexing service, you may need to disable the program by clicking on the Start button > run > msconfig > Startup tab

   

   

   

  
  --
  db·´¯`·...¸><)))º>

  .

  "JHL1951" wrote in message news: e8e61b15-0624-44 CF-a54d-0e41cf3de646...

  I use Win XP Pro, and I want to stop indexing load at startup in my system tray.  I somehow it started about 2-3 weeks ago and now I want to put an end to its use.

  Thanks for any help.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• stop loading at startup of the computer programs

  I want to stop some programs from loading at the beginning upward.  What should I do?

  Click Start

  Launch msconfig

  Select the Startup tab and uncheck programs that you want to stop to load at startup. Microsoft® Security MVP, 2004-2009

• McAfee Antivirus uninstall problems. Still trying to load at startup.

  I uninstalled McAfee Antivirus to my laptop, but now he always tries to load at startup.  Tried to uninstall again, but get an error message that the components are missed uninstalled failed. How to stop tying to load at startup?

  Download and run the Tool McAfee Consumer Product Removal .

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• just loading at startup screen but after loading is the screen is completely blank.

  original title: help with a Windows Vista laptop please help.

  When I start my HP Windows Vista laptop, it works very well and just loading at startup screen but after loading is the screen is completely empty. The keyboard works fine and the keyboard lights are on but nothing on the monitor. Help, please? Passing on the black screen the arrow appears, but again, it is all black.

  > @dhhuang they don't tell me because I have no guarantee and it's like over $ 100 just for talking on their phone, which I think is not worth.

  I'm sure you can order a set of recovery disks. You need to talk to a technician to do it. Yes?

• In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

  I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

  Hi HiteshAstan,

  one) don't you recall making any changes to the computer before this happened?

  (b) what exactly happens when you sign in to your account?  You get a specific error message?

  Step 1: Let us check if the problem persists in safe mode

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  If the problem persists, you can deduct that the user account is corrupted

  Step 2: Create a new administrator account and then try to repair your user account

   

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  After the back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to limit which loads at startup?

  Is it possible to limit which loads at startup to speed up this operation?

  This can be done with msconfig.exe or AutoRuns.

  If your shoe is slowly, follow these steps:

  Make sure you have the services Superfetch and ReadyBoost are running and then try to speed up the boot with the help of my guide [1]. This causes the prefetcher in Windows Vista. This increase startup performance a lot. All other tweaking tools are useless. Use this method only with this Toolkit from Microsoft.

  If it is not to speed up the startup process, follow my guide [2] to start track and compress the boot_BASE + CSWITCH + DRIVERS + POWER_1.etl 7z and RAR and transfer it to your Skydrive [3] and post the link here.

  I take a look at the trace, maybe I see what's wrong with your Windows.

  André

  [1] http://www.msfn.org/board/index.php?showtopic=140262
  [2] http://www.msfn.org/board/index.php?showtopic=140247
  [3] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/