Connectivity host to 2 different bays/fabrics

Similar Questions

• Can I use NetMeeting to connect two computers in different physical locations using NetMeeting to dial a modem line with another computer

  original title: Microsoft Netmeeting

  Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too?  NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP?  Can we use NetMeeting on Windows XP Home Edition or XP Professional?  We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity.  . You want to use NetMeeting for tutoring purposes.

  Hi Rafael,

  Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.

  How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/878451

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_netmeeting.mspx?mfr=true

• is it possible to connect 2 computers 2 different 1 modem wireless routers

  is it possible to connect 2 computers 2 different 1 modem wireless routers?

  Why do you have 2 routers?

  Depends on the design of the modem. It probably only supports a connection. So, you'll probably end up making a wired connection between modem and "1 router" and if you really need a second wireless router, install a wired connection between the 2 routers.

• VNX 5300 file shared storage - connect to Cisco UCS 6200 interconnection fabric

  Hello

  I'm designing a calculation and Shared Storage solution to help

  • EMC VNX 5300 shared storage
    • Block
    • File - sharing two Data Mover with i/o 10GE ports
  • Cisco UCS Blade Server Platform
    • Interconnection of Cisco UCS 6248 fabric
    • Chassis Cisco UCS 5108

  I have a question about where the connection Data movers with i/o 10GE ports. I connected to the 6248 UCS Cisco fabric interconnections or connect them to the switch IP network?

  kind is ok.

• Hi, I'm trying buy Adobe Creative cloud but get message "this card was purchased in a country that does not match your Adobe ID you can try to connect with a login different Adobe or contact us if you need help."

  Hi, I'm trying buy Adobe Creative cloud but to message "" this card was purchased in a country that does not match your Adobe ID you can try to connect with a login different Adobe or contact us if you need help. ' "

  Can anyone help with this please. Thank you

  Hello

  Please visit the link below: -.

  Redemption code help

  How activate/redeem redemption Adobe CC Code

• This card was purchased in a country that does not match your identification code Adobe you can try to connect with a identifying different Adobe or contact us if you need assistance.

  Hi I get this message when I try to install adobe software, how can I fix this problem? Thank you I really need your help

  This card was purchased in a country that does not match your identification code Adobe you can try to connect with a identifying different Adobe or contact us if you need assistance.

  Hello

  Please see redemption code help

  Kind regards

  Sheena

• Stop reboot request when fast vMotioning to a host with a different processor

  I need help to find a better way to deal with a prompt to reboot my users get due to a vDesktop in model (Dell 710) host vMotioned to another (Dell 720). The difference between the two is the processor models. The 710 is a Xeon X 5670 and the 720 is a Xeon E5-2667. The two processors use the same .inf (cpu.inf) file and apparently the drivers. Simply, it triggers the installation process of the material causing the Plug and Play Manager to require a restart of the operating system after the installation. The result, I'm wanting just needs that this reboot window displays don't not weither would it by slaughtering the hardware installation process, hide the window of dialogue itself, or any other possible way to configure the system which does not show users. I've confirmed that you don't have to restart the machine remain operational. Here is some additional information on the operating system and all.

  Windows 7 32 bit

  1 vCPU

  2G of RAM

  vSphere 5.0.0 623860

  Discover Constable's 5.0.0 481677

  Any suggestions or thoughts are greatly appreciated.

  Tanner

  I encountered the same problem and the only solution I've found so far is to start the master on both hosts.  When he started on the two hosts, the message no longer appears when moving the virtual machine back to a host with a different model of CPU.  I have two clusters currently, so I have not tested vMotioning fast machine between hosts with different CPU while it is running.  When I had the chance to test, I'll post my results.

  -Chris

• What is the connection / host to connect to sqlplus, Form Builder, string etc. ?

  Hi brothers and sisters.
  
  Hope that you are well. I installed Oracle Developer Suite 10 g on Windows 7 successfully and that it works correctly. I remember the login and the password. But what is the connection / host to connect to sqlplus, Form Builder, string etc. ? Where should I check it?
  
  Noor

  Hello

  You can connect without string something like that.

  sys/password as sysdba
  

  Sarah

• Connect comments on a different network than the host

  Hello

  I just started to use VMWare instead of Virtual PC, and I'm stuck trying to do something that I used to have the installer.

  I want to be able to connect to a virtual computer to a wireless network and independent of the host connection. In this case, the host will not be connected to a WLAN network, but the virtual machine will be.

  Is this possible?

  Thanks for any help.

  Not regarding virtualization, I suspect unless you remove the .inf and .pnf files in the folder %systemrot%\inf of the guest for the VMware NICs and and add IDs PCI of its .inf file for the .inf for your wireless card that you have copied to here and also change the drivers referenced in the .inf for your wireless card file to be the VMware ones. Not tried this, just a theory and not a beautiful there :|

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Unable to connect hosts to vCenter

  Hello

  I see this problem is well known, but after trying everything I found here or on the different VMWare KBs (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1027672), you are my last hope !

  When I try to add a host to vCenter (via vSphere Client or vSphere Web Client), I have the following error:

  • Cannot contact the specified host. The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond

  About versions of software:

  • ESXi 6.0
  • vCenter 5.5 (installed on a Windows Server 2008R2)
  • vSphere Client 5.5

  Here's what I CAN do.

  • The host can ping vCenter (both with IP and server name)
  • vCenter can ping on the host (with IP and server name)
  • DNS resolution works great
  • I can connect directly to the host with vSphere Client (and create a virtual machine, if I want to)
  • The host is not in "Lockdown" mode
  • The vCenter database is clean (MSQL Express, a small)
  • I tried to affect the timeout of negotiating SSL 12000ms, as it is mentioned in the KB, but the problem is still there
  • vpxa service is running on the host computer

  If you have advice, information, even the smallest one, please share it!

  Could this be a problem in version? A known issue with 6.0 ESXi and vCenter 5.5?

  Thank you very much for your help!

  Yes, problem solved.

  My mistake was that I just add the network configuration of the ESXi domain suffix, but I did not actually Add the ESXi host at the estate, with the permission of the administrator of the domain. (Now, it seems so obvious...)

  So I had to plug directly into the host ESXi via Vsphere (in my case Windows), go to the configuration tab and add the host to the domain.

  After that, everything went well.

  Thanks again Andrew for your help on this!

  Nice day

• Best way to migrate virtual machines to new ESXi hosts with a different configuration of networking.

  We currently have a cluster of 6 Dell machines that move VM 120 or so on ESXi 5.5. Networking consists of a dVswitch with 6 uplinks that map to 6 x 1gig physical NETWORK adapters on each host ESXi... These are grouped into 3 trunks / gal, so we have 2 GB by SHIFTING of the bandwidth and failover. The LAGS are configured as follows:

  LAG1

  Traffic to our (NFS) shared data store and management of ESXi. (vmk0)

  LAG2

  Access to the network of the VM - groups of different ports on different VLANS

  LAG3

  vMotion (vmk1)

  We just bought 6 new Dell machines that have connections fiber 2 x 10gig each. The idea is to bring together in a 20Ggig LAG by machine that will handle all of the traffic, so traffic NFS data store, network traffic from the VM, vMotion and traffic management ESXi.

  
  

  What is the best way to migrate the virtual machine in the cluster existing to the new machines? Many of the virtual machine are essential, so we cannot stop time.

  
  

  Can I create the new DELAY on existing dVswitch and put it as an auxiliary card? I'll be able to do it for all 3 of the above both above LAGS?

  
  

  Thanks for the info Alistar, it's almost here. The bit that was me stumping was that after establishing a new dVswitch I received messages that the new dvSwitch was not reachable on the old host, when I tried to migrate the virtual computer.

  The solution (with the permission of VMware Support) was that I need to add the two dVswitches to one of the old hosts, then assign a physical alternative on this host uplink to a temporary 3 uplink on the new dVswitch. I then tag all the relevant VLAN that uplink.

  This way I can first migrate the virtual machine to the new dVswitch networking so I can move the computer to the new cluster.

  Obviously I can only migrate from old to new cluster with a single host. each virtual machine must be a double for the host with 2 switches, and then to the new cluster. I also had to have the two dVswitches to the same version.

  Fortunately, I had a physical rising spare on the hosts of the old, otherwise I would have had to break one of the trunks and re-use of one of these uplinks.

  Oh and be aware, impossible to use the same names for groups of ports 2 DV switches, they must be unique!

  Nick

• How to migrate a virtual VC server to another host ESX with different CPU ID

  Hello

  by updating my equipment VI 3.5 of old AMD Single Core of AMD Quad-Core a problem has occurred: the new CPU´s of course have a different CPU - ID, so it is not possible to do a live migration of my virtual server VC from the old machine to the new one.

  A migration cold is of course not possible, because after the stop server vc I ve no connection via VC Management Console... of course

  How can I get my VC-virtual server running on new hardware, I guess that there must be a solution and I hope I m not the only one, who runs a virtual VC server and must change the material

  I look forward to any possible solution, thank you very much.

  Heinz Kabisch

  If the VCVM is on the only shared storage remove the virtual machine from the old host and enter it on the new host by connecting the VI client to each host. TO register to browse the store of data and right click the .vmx file and click Save

  If not on the shared storage (but I hope it is) you can copy the files from the virtual machine (*.vmdk and.) VMX file) from one host to another using the SCP. Then connect to the new host using the VI client and enter the VM VC

• Equium L40 PSL41E: Wireless not connect host process not put end to

  Recently, I got a blue screen on this laptop crash after that get a message telling me a host process had ended.

  The computer is running Vista, so I expect problems when my parents bought my sister this laptop.
  In any case despite the frequent blue screen stop messages, etc.. When I get the message telling me that the host process put an end to my wireless connection gets messed up.

  The last time I used windows: diagnose why Windows cannot find network option and was quickly informed that my wireless was turned off (despite the fact that he was actually turned on) and that the computer would automatically turn back on.

  After that it worked fine for a few days until I had another stop of host process and the computer crashed once more.

  This time, the computer refuses to connect despite the use of the above method and the ConfigFree(Connectivity Doctor), fix the connection etc.

  I give myself the possible Solutions are:

  Check the communication device for bridged settings you may need to disable the bridge or reconfigure. a 15.

  It is certainly not the problem.

  a-9 Move closer to the wireless router.

  Even once is not the problem, I'm sitting next to.

  a-10 tour of all bluetooth devices or other devices that may interfere.

  There are no such devices near to.

  a-11 Check to check a microwave oven is not in use is close.

  It is not in use.

  a 13 make sure that the maximum number of devices connected to the access point is not exceeded.

  Well, it worked for 6 months before that, so I do not know is not the case.

  a 37 to ensure that filtering by mac address of the access point is configured correctly.

  I don't have any idea what it means. But my cell phone girlfriends works very well with the wireless connection.

  a 19 restart the router/access point

  Done several times.

  Well, good suggestions. Fire now that I'm all ears.

  Hello

  I put t know why a host process has stopped working, but to my knowledge, the process could be svchost.exe.
  However, the issue seems to be related to the Vista OS problem

  I see that you have tried to solve this problem, but without being successful, you also get a BSOD so I think it's a serious problem of software and you must first use the Toshiba Recovery CD to reinstall the operating system on this laptop.

  After the new installation (would take about 15 min) update the operating system to the State.
  Then you can try to reconfigure the wireless network

  It's worth to try ;)

• Unable to connect to storage as "different subnet."

  Have just updated my LenovoEMC device to the latest version of the software (4.1.114.33421) and now get the message

  "Unable to connect to the storage because it is in a different subnet.

  but I can go to the Admin in the usual way, through devices and can change anything, as all the mapped drives as if it worked and all the data is visible?

  Reset the system and all users etc., verified that DHCP is select rather than fixed, tried fixed without result.

  Someone has an answer that works or is a reset?

  Got it finally - works had to install a new version of Storage Manager - Version 1.4.8.33485

  After installation, restart the PC only and ran it Storage Manager - it took forever, but she finally found my nas and created links to explore.

  Can't believe that they a D A M N blip! in my previous post - AR even if you ask me.

• Connectivity between Interconnect and Nexus 2000 fabric options

  Hello

  I would like to know what models of fabric nexus 2000 Extenders can I use if I want to connect them to a pair of interconnections 6248UP fabric in a FEX deployment, so I can move between blade and rack servers service profiles.

  Thanks for your replies.

  Christian

  Christian,

  Take a look at this guide.  It should answer all your questions:

  http://www.Cisco.com/en/us/customer/docs/unified_computing/UCS/c-series_integration/ucsm2.0.2/b_UCSM_202_C-integration.html

  Kind regards

  Robert