Equium L40 PSL41E: Wireless not connect host process not put end to

Similar Questions

• I want to recover my Equium L40 - PSL41E

  I want to wipe the HD on my computer laptop lads and re - install the OS from the 1.46 GB Toshiba providing hidden partition.
  Only problem, is that the product supplied with the laptop recovery CD doesn't play ball.

  I've configured the BIOS to boot from the CD,
  I now tried the 'C' when you turn it on and
  also tried the PF12 key while booting.

  The only answer is a cd drive grinding noise when trying to read the CD and a simple blinking cursor on the left side, on a black background.
  After about 30-40 seconds, he spends mode with Microsoft Corporation under a mobile bar and then the Windows Logo to normal startup.

  I can't open or read the CD on the laptop but can open & read it on my other desk perfectly, I can even read from my laptop on my home network.
  I can open & read other CDs on the laptop perfectly.

  I uninstalled the driver CD and rebooted to activate Windows find and reinstall. I went through all the drivers and updates to those who
  find new versions. The driver of the CD was not one of them. (FYI, it's a Pioneer DVD - RW DVR-K17A ATA device v.6.0.6000.16386)

  I used F8 to get in the Advanced Options Panel, but when you go through the different selections for the "Format and re - install OS' option it just straight up pop"
  with an advisory screen advise you to use the product recovery CD.

  Does anyone have any suggestions or ideas to try to get this CD to work on my laptop Toshiba of guys. (Equium L40 - PSL41E)
  Thank you very much.

  > I'll go and try and borrow an external drive before I go and buy a new one.
  And then you'll post here again once you cannot start the recovery CD/DVD facilities.
  Best solution for you is to swap the internal optical disc drive. Not only due to the installation of recovery, but also for the use of the other.

  User s manual, you can find a list of all compatible drives. Exchange is very simple and you can do it alone.

• Toshiba Equium L40 - 10U Wireless does not

  I recently updated my Toshiba Equium L40 - 10U to Service Pack 2 for Vista and now my wireless does not work. I tried to update my driver - but its already been updated, checked for updates - all installed, ensured this driver has been activated. Yet I still can't wireless to work, I don't know what to do now!

  I checked my network connections and my wan (PPPOE) miniport is disconnected when you try to connect it comes up with ERROR 815. Then I have to make sure that my internet connection options were correct - do not establish a connection and do not allow the proxy server and still get this message.
  My BIN is Realtek RTL8139/810 x Family Fast Ethernet NIC (do not know if this is useful or not) I tried to turn it off then try and turn it back on? But do not know if that would improve the situation or not.

  Hello

   
   
  (1) do you have made no changes before this problem?
  (2) what is the exact error message / complete you receive?
   
  Method 1: Follow the steps in the following articles and check if they help.
   
  Step 1: Safe mode with networking 
  See the link below and check if the problem persists in safe mode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
   
  Step 2: If the problem does not persist in Mode safe mode with networking, I suggest you to put the computer in clean boot mode and check if it helps.
  Clean boot mode
  A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After completing the troubleshooting steps, please refer to clean the start link to set up your computer to normal startup mode.
   
  Method 2: Follow the steps in the below items to Disable Antivirus and firewall and check if it helps.
  Step 1: Turn off the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Step 2: Turn Windows Firewall on or off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3: Uninstall and reinstall the drivers
   
  You can also try uninstalling and reinstalling the drivers who can help you further.
   
  Also see the links below for assistance.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  List of Error Codes may appear when you try to establish a dial-up connection or a VPN connection in Windows Vista
  
  http://support.Microsoft.com/kb/923944
   
  Hope this information helps.

• Equium L40 - lost wireless connection

  I have an Equium L40-156 under Vista and wireless became intermittent. The switch light would go out or maybe turn on at startup. In the end, I did a restore of the entire system from scratch and installed the latest drivers (Realtek) wireless.

  This seemed to cure the problem and it has been fine for the last 2 months. However, the light is now out again (it was working an hour ago), and there is no wireless connection.

  I tried a restore of the system and also installed the latest driver from Toshiba, but I still can't run. I hesitate to start over again once it takes all day to load programs and updates. Can anyone suggest what I can do or is this another bug of Vista?

  Great news

• Equium A60 - no wireless network connection

  Hello world

  I have had a good look through the forums and can't find anything related to this but my apologies if this has been addressed elsewhere :-)

  I set up a wireless home network with a Windows XP desktop computer with a router and a laptop old Win98, WinXP SP2, which I can't connect and an Equium A60. I installed two different network on the A60 USB adapters, seems to be okay with all of them except that there is no "wireless network connection" listed under network connections Control Panel. Both cards work fine on two other machines, so there must be a problem with the A60. I installed an adapter and then uninstalled before trying another.

  Under control-> connections Panel Network, I can see an old broadband connection and the connection to the Local network (which is allowing me to connect to the router via Ethernet, so that the router will work), but the wireless network connection icon is not there. The driver for the USB adapter makes its appearance in Device Manager and is reported as working properly, but if it worked correctly then (I think) a wireless connection icon should appear - it happened with my other WinXP desktop.

  Any ideas of what could be the cause?

  Thanks in advance
  Gareth

  Post edited by: g_shaw - added a few details

  Hello

  I guess that the external WLan USB stick has been recognized one installed correctly. You said it appears in Device Manager. Are you sure that the WLAN USB key has been recognized to 101%? !!

  If the WLAN USB key is recognized correctly, check the properties of this stick. (I think you should right click and then click on properties).

  But if the stick was not recognized, you must verify the properties of the single USB ports and power safe mode.
  Choose the USB single root hubs in device, right click, properties, tab power management Manager and disable the option called allow the computer to turn off the device to save energy.

  So maybe it helps

• Equium L40 - 17 M: WLan connection but the light no longer works

  I recently transferred my laptop Equium L40 17 M. ROM Vista to Windows 7 64 bit and since that time my WiFi light has not worked - of ideas?

  Help!

  Hello

  I guess you are not able to activate the WiFi network and therefore the wifi does not work in Windows 7.

  First of all, you must make sure that the WLan card driver has been properly installed and that wireless network card has been recognized in the Device Manager.
  No yellow exclamation point must be visible in the network adapters.
  Here is a page with drivers WLan:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  I think that your laptop support REALTEK RTL8187B WLan 802.11(B/G) card so you have to choose Realtek WLan driver.

  In addition, you should make sure that WLan is enabled;
  You must switch the WLan POSITION to allow the led WLan
  In addition, you have to use FN + F8 buttons to choose the wireless network adapter.

  If the buttons Fn would not work, then you must install the VAP (value added package) and Flash memory card Support utility. You can choose the tools available for Satellite L500...
  I did and it worked

• Equium L40-14i does not power up if its cold

  When I push the power button down when the machine is cold, green power light comes on for about 2 seconds, then turns off. If I give the laptop a little sweet heat for 30 seconds, the notebook starts up the first time and works perfectly until the machine is turned off. The laptop is Equium L40-14i

  Hope someone can help with this strange problem.

  Hmm laptop Equium L40 is an older model, it is possible that some parts of the motherboard (maybe electronic power) does not work as it should.

  By the way: before talking about some problems of motherboard, you should check if the laptop works properly using another job good and checked power adapter.

• Equium L40 - internet does not work if I open more than one Web site

  I have an Equium L40-10 X, and while the system works well, he doesn't like the internet. If I open more than one Web site, a little box comes up saying that Internet Explorer has experienced a problem and must be restarted. It becomes excruciatingly embarrassing if I'm in the middle of something important and I lose the site I've been on!

  Especially with me, go to college soon too! Especially it will refuse to work if I have to download something, for example, I recently bought an Apple iPod Nano and I needed iTunes in order for me to put music on it, but once he starts the download, the "internet has stopped working" appears and I have to start everything again, but instead of her work - quite simply, there is no!

  This often becomes a case and it makes me incredibly stressed!
  Help, please.

  Hello

  Always use the OS from windows update?
  These errors occur if the registry is dirty and drunks was not updated!

  Update windows on Microsoft for the last State page!
  In addition, you must clean the registry using the freeware tool called CCleaner. It s nice!

  So finally a hint;
  You can access the internet with Microsoft Internet Explorer and with another internet browser like Firefox for example.

  I recommend you this possibility.

  concerning

• Equium L40 - CDDVD does not recognize Audio CD

  Hello

  I recently bought an Equium L40 and that's fine, except that the CDDVD drive does not recognize Audio CD. Just drive whirs and grinds for a few seconds then stops. DVD read correctly. The Audio CD I tried to play properly on other machines. I tried to change the settings for AutoPlay to "Ask Me every time", but it doesn't seem to help. Has anyone seen this problem before?

  Thanks in advance for any help.

  Kind regards

  Chris

  Hello Chris

  Have you tested with different CD (one oldest and newest) original music?
  You see the content of these CDs in Windows Media Player?

  I tried on my P200 with two original music CD and there is no chance of start them from Windows Explorer or see the content there. Start Windows Media player and I hope that it will work.
  Please post the result.

• Re: Wireless has stopped working on my Equium L40 (PSL41E)

  Hi guys.

  With the help of my laptop wireless this morning and all was fine, then all of a sudden, it loses the connection.

  Tried different methods to restore the link, update driver downloaded but no luck.

  The wireless light on the front of the laptop no longer turns, so I was wondering if there was some kind of internal problem.

  I am house bound and rely heavily on my WiFi, so if someone could suggest a solution to the problem, or has any suggestions, which would be excellent, but please keep in mind, I'm not very technical interest, you may have to explain things in detail!

  Thanks for your help.

  Karl

  Hello!

  You have activated the WiFi connection with the hardware switch of the laptop? The switch is on?
  In addition you can disable/enable the WLAN function with the FN keys. Therefore, you must press FN + F8.

  And what driver have you installed? If you update the driver, you should look on the Toshiba WLAN portal. There, you can always find new driver versions:
  http://APS2.toshiba-tro.de/WLAN/

  Good bye

• Equium L40 - switch wireless and F8 command does not

  Hello world

  I have problems with the wireless button after I took my laptop apart to clean. The wireless button won't light up at all and only would light up. When I press fn f8 nothing happens. I don't know what I did. The wires are correctly in place, as far as I can tell. I tried the following things:

  Uninstalling the card in the Device Manager and reboot
  Checked adapter is listed as working properly
  Do a system restore
  Check the BIOS

  I don't know what to do else would appreciate pointers. Thanks in advance!

  > I'm not sure what I've done.
  And what to say about that now?
  You, as the owner of the laptop, are not allowed to disassemble the laptop. You did this at your own risk. To be honest I n know how to help you now.
  > When I press fn f8 nothing happens
  I believe you that. You must activate the WLAN using the WLAN switch first. Place it in the position YOU. After doing this, you have to press FN + F8 and not only F8.

  When you do this you find flash cards and options for the WLAN?

• Equium P200-1IR - wireless is connected but cannot access the internet

  Hi there,

  Need a little help!

  I just bought an Equium P200 1IR.
  I activated the wi fi.
  I see my router which is Talk Talk.
  Can I get the laptop to connect to the router and it says I'm connected,
  However I can't access the internet.

  I tried the same process by inserting a WiFi dongle into the USB port
  on the laptop, and exactly the same thing happens.
  We have other home computers that connect to the router and the internet
  OK using the wireless dongle.
  I plugged a rigid cable between the laptop and the router connection and I can't
  access the internet immediately without any problem, however, would be delighted
  to use the wireless function.

  Any help really appreciated... Thank you

  Waynec

  Hello

  Try please reboot your router. A few weeks ago, I had a similar problem with my Satellite A300. WLAN is connected but Internet was not available. After the router is restarted all of a sudden everything was ok again.

• Equium L40 loses the WLan connection while surfing internet

  Hello

  Every now and then when clicking on certain links in Firefox or IE, I keep losing my connection or even when I am surfing on my page crashes because a window came to ask connect me my connection to wide band, and yet I am already connected wireless!

  What can I do to stop this?

  Thank you
  P1rate

  Hello

  Please visit the page of European Toshiba driver download and update the BIOS and the driver WLan.
  The two parties should be updated the last State.

  I read that this update improves the WLan functionality!

  Welcome them

• Equium L40-10 X query: connecting to a HD TV

  I have a HD TV, I need my laptop to establish links with.

  I was told that the 15-pin male VGA to HDMI cable is needed for this I understand; No problem.

  However, I need to know if my video card can support digital signal through VGA port function output. Can someone answer this, and if POSSIBLE, could it talk me through setting up?

  Thank you very much in advance for your help.

  Hello

  It of possible to convert the digital signal to analog, but not possible to convert analog to digital.
  In addition, you are unable to upgrade or replace the graphics card. The chip is part of the motherboard and is not replaceable.

• Equium L40-14i does not illuminate!

  When I turn on my laptop the power button turns green and the disk drive can be heard for a few seconds, after that nothing happens. The screen remains black. I don't know how it happened.

  Hello

  Sounds like serious hardware problem.
  You are able to access the BIOS? Usually, you can access the BIOS by pressing F2 at the beginning.
  So if this is not possible, then it means that your card mother s cell phones likely to be affected. But also the defective RAM module might be possible

  In my opinion, the technician of the ASP must check these pieces of hardware.