Connector using Siebel-OPA BO mapping for the large amount of data

Similar Questions

• Memory management by displaying the large amount of data

  Hello

  I have a requirement to display the large amount of data on the front in table 2 & 7 graphic during the time period 100hrs for 3 channels, data read from strings must be written in the binary file, and then converted and displayed in front of the Panel for 3 channels respectively.

  If I get 36 samples after conversion for all hours, up to 83 h 2388 samples displayed in table and graphical data are thin and samples correspond exactly.

  After that 90 hours 45 minutes late is observed after theoretical calculation of samples, what could be the problem

  I have controller dual-core PXI8108 with 1 GB of ram

  As DFGray,

  says there is no problem with the RAM or display, problem with conversion (timming issue) if I am data conversion of large amount it takes even, compared to the conversion less amount of data. So I modifed so that each data point Sec 1 is convereted at once, problem solved

  Thanks for your replies

• How oracle will show the large amount of data

  Hi all

  I have server Oracle 11 g on linux os 2. Total sga size is 500 MB only. Now, if customs wants to read the 1 GB of data from database, there no sufficient memory in the buffer cache. So how it will work. the transaction will get successful or it will fail.

  And I have another doubt, done oracle can read data from memory only or it can also read directly on the disc.

  Please let know us your opinion. Thank you.

  Please go through the below documents

  Oracle library documentation

  asktom:how Database Buffer Cache works?

  Oracle database concepts

• How to load the large amount of data in 2 tables oracle ~ mill 6 lines-URGENT

  Hi all
  
  
  
  
  I have a file with lines of 6-8 million load us using a direct charge into a temporary table. Then we insert the missing data by research. The data in this temporary table are inserted/updated in table1.
  
  for ex - we have:
  Table1 (key1, key2, key3, key4, key5, col1, col2, col3)
  Table2 (key1, key2, key3, col1, col2, col3) - the only diff between table1 and table2 is key4 and key5 (located in table 1).
  
  First we insert/update data into temporary table table1.
  
  Insertion: insert into table1
  Select * from insert_table where (key1, key2, key3, key4, key5) IN
  (select key1, key2, key3, key4, temporary_table key5
  less
  Select key1, key2, key3, key4, key5 from table1)
  
  
  
  because me to (select all colulmns
  of insert_table
  less
  Select all columns in table1)
  loop
  Update table1;
  end loop;
  
  
  Then we insert/update data into table2 from table1.
  -the only difference in the insert/update is I use partiiton by making the sum of the columns non-cles and inserted the aggregated data in table2.
  
  Insertion: insert into table2
  Select key1...
  sum (nonkey col) over (partition by key1, key2, key3)
  FROM table1 where (key1, key2, key3) IN
  (select key1, key2, key3 in table2
  less
  Select key1, key2, key3 in table1)
  
  
  Update:
  I'm in (select key1...
  sum (nonkey col) over (partition by key1, key2, key3)
  FROM table1 where (key1, key2, key3,) IN
  (select key1, key2, key3 col1 in table2
  less
  Select col1, key1, key2, key3... from table1)
  )
  loop
  Update table1;
  end loop;
  
  
  
  First we insert/update data into temporary table table1.
  
  Insertion: insert into table1
  Select * from insert_table where (key1, key2, key3, key4, key5) IN
  (select key1, key2, key3, key4, temporary_table key5
  less
  Select key1, key2, key3, key4, key5 from table1)
  
  
  
  because me to (select all colulmns
  of insert_table
  less
  Select all columns in table1)
  loop
  Update table1;
  end loop;
  
  
  
  Data is loading properly - IF full charge. As the size of the file grows long OPS in Toad/Session browser - sorting becomes huge.
  
  How can I improve the speed and make it better?

  You can consider using a single command to MERGE instead of your insert and the separate update loop if you're already on 9i.

  In addition, you should consider generating statistics to a minimum on the insert_table using DBMS_STATS. GATHER_TABLE_STATS.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• TomTom map is wrong in vietnam, pls use google map for the ios update, thank you

  Map of Tomtom is very bad in vietnam, please use Google map for the ios update, thank you

  We are fellow users on these forums, not support nor Apple iTunes.

  TomTom are responsible for their own data to the card, if you have problems with their app and/or cards that you have tried to contact them?

• I try to add an image map for the first time using Dreamweaver CC

  I am trying to add an image map for the first time using Dreamweaver CC in an html site.

  I can get map controls is displayed when I select the image in the code, and I can select the rectangle tool.

  However, when I try to select the area of the image disappears from the section of the map of the properties viewer and I can't select the area for my hyperlink.

  What I am I missing videos online are it seems so simple, but something with my page is not allowing me to withdraw this.

  This is the code section and the image that I'm trying to add the link.

  < side class = "sidebar" >

  < img src = "images/flowchart.jpg" alt ="product dev. Flowchart">

  < / side >

  Please help or give me any advice... There might be something to do with the fact that my site is "sensitive"?

  Hello

  You could just add links to each box, but a better solution would be to use svg for this. Unfortunately, it is easier for me to write for someone who does not know svg to do.

  If you have Adobe Illustrator create your svg using this program, then it would be a case to add links manually to each box created in the svg code. SVG is an xml-based language and not a real image, even if this is how a browser will display the it.

  PZ

• Can I use an I tunes card for the mini game on my I pad?

  Can I use an I tunes card for the mini game on my I pad?

  You should be able, unless you're an Organizer from family to family sharing (an organizer can not use gift cards). Buy the card on your account (this is the account that has downloaded the games on your iPad?): Redeem iTunes and Apple music gifts and codes - Apple Support

  Purchases should automatically use the balance of your account

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• I also get the error code 80070005 when you try to use Windows Update to check for the updates

  I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

  Hello

  1. what Microsoft fixit did you run?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• Is it safe to use Safe Mod with networking for the use of the computer every day?

  Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you

  Hello, Winston,

  It is actually for troubleshooting only.

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.

  Wireless network adapter may not work when you use the Option "Safe Mode with network.

  http://support.Microsoft.com/kb/305616

  Safe mode disables most of the processes and services running. These services include the Windows Update service. »

• BlackBerry Smartphones GPS maps for the Australia

  Hello

  I have just the BB "BOLD" and have discovered that BB do maps for the Australia, I saw on the net about Google MAps for BB, I downloaded them and well, what can I say besides of doesn't work is not for me, no voice and does not follow on road.

  Is this supposed to or only give you directions as a collection of paper maps.

  I was looking for real GPS map in turn for blackberry as if I had in my phone HTC accompanying called co-pilot.

  Thanks if anyone can help

  See you soon

  Tones

  Hello and welcome to the Blackberry Forums

  Sorry, but BlackBerry Maps has no direction voice in turn.

  You can try with Garmin for BlackBerry, but there are not free.

  Garmin.com

• ASA 5510 VPN - using a public IP address for the local network

  Hello, I have a problem which is probably very simple, but I can't seem to understand.

  I set up a site IPsec connection to another with a company, something I've done many times before without a problem. I use ASDM to configure this, because it is quick and painless, usually.

  We have one number of other site-to-site currently configured connections and works very well on this ASA, these are configured with the "Protected network - LAN" configured with the IP private of hosts within our network, we want to make available through the separate tunnels. This includes the configuration setting on our ASA for each connection to "guests aside ASA exempt from NAT.

  With this new link, however, the company asked us to use a public IP address for the host that we want to achieve through the tunnel. I don't know why, but they demand it. So I added a NAT rule for inside the host and set up the connection with the public IP address under "Local network". During the test to try to reach a host to their side, the tunnel didn't even try to open.

  What is the method here? I don't see where I'm wrong. I'm guessing that the 'host side ASA exempt from NAT' does not require for this, how if the ASA would know which internal host is the public IP address.

  Any ideas?

  Hi Leo,

  The steps are:

  1. Add the policy rule NAT for the specific host.

  2 - define the IP NAT as your LOCAL NETWORK address in the encryption settings.

  3 make sure that there is no rule NAT exempt for this host to the specific destination.

  What happens if you run a package tracer?

  Thank you.

• The cloud of document can be used as a network location for the sending of request for comments to a greater number of commentators?

  The cloud of document can be used as a network location for the sending of request for comments to a greater number of commentators?

  I manage not rather these comments by e-mail, and we do not have a webdav server that is accessible from the outside.

  Thank you

  Hi Jeff,

  No you cannot use Doc Cloud for this purpose. For detailed information, please see the following link: using Acrobat | Prepare a PDF review

  Kind regards
  Rahul

• FAT32, exFAT, NTFS, which is the best for the recovery of deleted data?

  I have a usb 3.0 port (Kingston 100 3 16 GB) to store my important data. I read the article on this site: http://www.ntfs.com/ntfs_vs_fat.htm

  and they say recoverablitity of exFAT is "Yes if FAT active." I don't know what FAT and how to activate it, and what type of file system should I use (FAT, exFAT, NTFS) for the highest ability of data recovery if they are deleted?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of problem, you're ready to recover the deleted data and would like to know some information about the FAT.

  A transaction-safe FAT (FAT) file system is a file system designed specifically to ensure the security of transactions for data stored on a disk. FAT requires a driver of specific hardware designed for the type of media on which the volume of FAT will exist. Assuming that there is a driver of material-specific secure transaction block, and that the driver provides interfaces to standard FAT file system, the FAT may work on removable media such as Compact Flash cards and digital cards secured, as well as media not removable, such as hard drives and NAND Flash memories.

  By design, the FAT file system is not a secured file transaction system. FATF may be corrupted if a write operation is interrupted in the middle of a transaction. Interruptions to occur due to loss of power or the suppression of the media. Fat is corrupted when the content of the FAT table does not have directory sections or data on the volume.

  I suggest you to return the article mentioned below and see if it helps you to recover lost or deleted data on your computer.

  Recover lost or deleted files

  As you disposed him to know FAT and his work, then here are some articles that might help you to learn more about FAT and its function.

  With the help of FAT (Windows CE 5.0)

  How to set up a system of FAT (Windows Embedded CE 6.0) file

  Transaction-Safe FAT File System (Windows IT 5.0)

  Implementation of FAT (Windows IT 5.0)

  Additional information:

  You can see the article mentioned below to learn more about NTFS and FAT32.

  Comparing the NTFS and FAT32 file systems

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards