Constant crashing again cs6

I use Premiere CS6 with Encore CS6. So far, yet has been used to make the DVD on the right. No menus etc. well that a few years ago, I made a couple of the more complex with menus.

My new project needs some chapters and I managed a single drive but now comes the problem. So that the creation of names for the chapters in the menu, crashes still almost never have time. I must have tried about 20 times with the same frustrating result.

I realize you might want more precise gen me, but I'll wait until you tell me what you need to help get information.

Thank you very much.   Pete

Thanks for your answer John. Sorry for my delay to return. Good news is that the problem seems to have resolved itself. Finally I just 'saved' after every keystroke and later (long), I arrived.  The disc and the chapters seem to work well.  But if there is a response, it will be useful to know more about. To reply to your points.

I am now on 10 to win despite being determined to NOT install it. I am one of these people who is is suddenly find that Win 10 himself had installed without my consent! After my initial panic, I was happy to find that everything seemed to work OK.

I tried to make the names shorter even if they didn't quite convey what I wanted to. I could see that might be a problem. No, chapter names were just some letters and nothing else. The buttons were just names of chapters with no attached video, and there are 9 of them.

It is appreciated that trying to find an answer is not as simple as that and really do appreciate your response. Do you have other suggestions please?

See you soon.   Pete.

Tags: Encore

Similar Questions

  • CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.

    CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.

    Hi neilm,.

    When you have disabled the cache, did you do via preferences > Cache Purge? Rarely, this method seems to work for everyone. It hasn't for me, because he never removes all hidden. But now press Cmd-Opt-Shift/Ctrl-Alt-Shift while launching Bridge and purge the cache and preferences will generally produce as clean a sweep as possible without going through the uninstall/reinstall bit. You need to configure your preferences for bridge all over again, but that shouldn't take too long.

    If this does not stop smash, return and let us know your OS is and what version of bridge that you use. CS6, but the numbers that you see when you click on the bridge.

  • Constant Crash logs and unusual behavior spotlight?

    Mac Book Pro (early 2011) 17 "quad i7 16 GRAMS / 500 Gb Crucial SSD MX200

    Hello

    I get constant crash messages in my console. There is a behavior unusual spotlight as well.

    It all started with a hint of delay and backup times with reading of error message "Impossible backup, please try again later"

    Spotlight is indexing for long periods of time. Research presented so I tried these possible solutions.

    1 (obvious) adding hd/external references to the list of privacy then removing to re-index... No.

    2 disable indexing with the terminal and re-activation controls... No.

    3 find 10.7.5 additional updated with the hotfix for extended projector or activity of time machine,.

    then focus on disabled,

    ran disk utility to repair permissions,.

    welcomed my backup run and assumed all was well. I thought that I re activated spotlight and the problem has been resolved, but apparently my console suggested projector has been disabled so I have reactivated the indexing and have had some problems of backup again... (continue)

    During my diagnosis, I consulted a friend who looked at my console. He mentioned disk i/o errors and I have maybe need to replace my hard drive soon - I was considering upgrading ssd anyway - so I did the installation and upgrade of RAM.

    Now, my attention is directed to my messages to the console.

    I get the minute incident reports or more. mdsworker showing an invalid address (?-?)? I don't have a lot of knowledge in regards to the console and how to read the messages, but I do not recognize the word or the fault accident. Any help is appreciated. Can't post a report if required. Thanks in advance!

    It seems too short to be a report, but perhaps a summary? A lot of these...

    30/05/16 11:02:43.316 PM ReportCrash: com.apple.message.domain: com.apple.crashreporter.writereport.crash

    com Apple.message.signature: mds

    com Apple.message.signature2: UNBUNDLED | ??? (???)

    com Apple.message.signature3: FAB1F6BC2EBB82D0BC47F031B7127505

    com Apple.message.Result: No.

    com Apple.message.summarize: YES

    Check if the MBP had the kernel panics.  If so connect and confirm it with these instructions:

    https://support.Apple.com/en-us/HT201753

    Ciao.

  • Firefox crashing AGAIN!

    The last week has been crashing in Firefox, for no reason, I'll be on a Web page for a few minutes, then the next thing a pop-up said that Firefox has crashed, so I send a report, and everything's fine, then maybe the same day, maybe two days later, it crashes again

    The only thing that has changed in my system is a new video card and 2 new games, BUT, they have been installed just last night and this morning, so I don't see how that would be a factor any with the crash

    Any help would be appreciated, I can't reproduce the problem, so I can't really test because its so random when it happens


  • Adobe Flash plug always crashing after having tried both solutions posted here. Works for a day then crashes again.

    My plugin Adobe Flash still crashes. First, I tried the Flash update. He worked for a day before you start crashing again. I returned to the page and I tried the 2nd solution for the decommissioning of flash 10.3. Yet once, he worked for a day or two but now gives me the same question. I am extremely frustrated.

    Hello UCF612, your system details (Details of the additional system) it seems that you have the two Shockwave Flash 10.3 r183 AND Shockwave Flash 11.5 installed r502, uninstall the 11.5 and check again.

    Thank you

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

    • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

    Hello LisaQuaranto,

    I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

    To perform a clean boot on a computer that is running Windows Vista:

    a. Click Start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    b. on the general tab, click Selective startup.

    c. under Selective startup, clear the check box load startup items.

    d. click OK.

    e. When prompted, click on restart.

    f. after the computer starts, check if the problem is resolved.

    If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

    http://support.Microsoft.com/kb/929135

    In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

    You can download the update following the link below:

    http://support.Microsoft.com/kb/968930

    Thank you
    Irfan H, Engineer Support Microsoft Answers

  • system crashed again error 0x000000f

    My system crashed nearly three weeks ago, everything was good until it crashed again today.

    When the startup it goes right to the "boot manager".

    file: \EFI\MICROSOFT\BOOT\BCD

    status: 0x000000f

    an error occurred trying to read the boot configuration data.

    and asked me to insert the installation disc.

    So I insert the disc, it then takes me to "install windows" screen

    I'm unable to select and click on "next".

    Due to my usb mouse freeze at this point.

    I was told that windows is perhaps corrupt, and I have to reformat 'c' drive and reinstall windows.

    But don't know how? help please

    Okie-dokie...

  • Frequently asked questions of ApphangB1 causing constant crashes in Mozilla Firefox

    Original title: I use firefox for my university studies. I now have recurring questions of ApphangB1 causing constant crashes please help?

    I use firefox for my university studies. I now have recurring questions of ApphangB1 causing constant crashes please help?

    Hello

    1. the problem persists with Internet Explorer?

    2. were there any changes (hardware or software) to the computer before the show?

    You must contact Firefox support for assistance.

    http://support.Mozilla.org/en-us/home

    Hope this information helps.

  • El Capitan crash hearing CS6. Had to reinstall older OS that wiped my computer clean. No need to reinstall CS6 (which was originally downloaded from the Adobe site) but the Adobe site can find no trace of my download. What should do? Thank you!

    El Capitan crash hearing CS6. Had to reinstall older OS that wiped my computer clean. No need to reinstall CS6 (which was originally downloaded from the Adobe site) but the Adobe site can find no trace of my download. What should do? Thank you!

    Hi Jeremy,.

    I do not see a CS6 license registered, if you have any other email address with which you have registered it please check with this e-mail on your Adobe ID on the forums.

    Kind regards

    BANI

  • computer crash with cs6

    Computer crash with cs6 who do I contact for me to reactivate the cs6?

    Uninstall your useless file, select a temporary file, and then reinstall CS.

  • What is the problem with Muse since the last update 6. October. It crash again and again and again!

    Screen Shot 2014-10-17 at 2.09.26 PM.png

    This happens several times a day that Muse crashes again and again, and yet once, when I worked with Muse?

    -What is the problem with the Muse?

    Adobe Muse CC 2014.2.1 is released today which includes the fix for the reported problems.

    Please install the update: Release notes | Adobe Muse CC

    Thank you

    Sanjit

  • Cannot start again CS6

    Hello

    in a few days I can not ' begin again cs6.

    "PSD support wird initialisiert", «Adobe Encore works nicht mehr»

    I installed

    Windows 7 teacher and

    Adobe Production Premium CS6 new

    Who can help me?

    Greetings, Christian

    http://helpx.Adobe.com/de/Creative-Suite/KB/troubleshoot-error-messages-bootstrapper-CS5.h tml

    If this does not help:

    still, uninstall cs6.

    Run the vacuum cleaner: http://www.adobe.com/support/contact/cscleanertool.html

    Then reinstall again cs6.

  • [CS6] Constant crashing indd due the "WRLiloPlugin.dll» files

    Hello, I am working on windows 7 64 bit with Indesign CS6, updated to the latest version.

    I have a document that hangs when I scroll a specific page. I tried to save back to IDML nothing helps. I also tried to create the document back from scratch, but the same thing happens. I checked the list of FONTS and links, but nothing is broken/missing. The same with preflight.  No error of missing glyphs or anything else.

    On the windows event log, this shows that the offending module is "WRLiloPlugin.dll":

    Name of the failing application: InDesign.exe, version: 8.0.2.413, time stamp: 0x51fb7197

    Name of the failed module: WRLiloPlugin.dll, version: 1.3.0.9, time stamp: 0x4f0afd76

    Exception code: 0xc0000409

    Offset: 0x0000bba5

    ID of the process failed: 0x18d4

    Start time of application vulnerabilities: 0x01cfa1b1c748ebcd

    The failing application path: C:\Program Files (x 86) \Adobe\Adobe InDesign CS6\InDesign.exe

    Path of the failing module: C:\Program Files (x 86) \Common Files\Adobe\Linguistics\6.0\Providers\Plugins2\WRLiloPlugin1.3\WRLiloPlugin.dll

    Report ID: 1b4b42cd-0da5-11e4-905e-001517af28a1

    Does anyone know how to fix this?

    OK, I have an update for future reference. The culprit was a dictionary of Winsoft, which was installed during the previous installation of CS4 or CS5.

    This file, I was working on that used Winsoft under preferences in the spelling dictionary and hyphenation. When I changed to Hunspell or nearby, the problem disappeared. It seems that the dictionary of Winsoft is more compatible and causes conflicts.

  • My C drive crashed with CS6 PS still installed on it. I would like to reinstall...

    Hello

    my C drive has crashed/corrupted with my box CS6 PS still installed on it.

    I would like to know how I can install this again on a new SSD please?

    I don't want to use CC, I would just be able to reinstall my CS6 PS I've had since not even a year yet.

    Thank you

    Marc

    You should be able to reinstall it.  You are allowed to have two machines with active facilities, so if you have not enabled on both machines, then you still have available activation.  You can also contact Adobe support by chat and ask them to deactivate lost installation so that you still keep a supplement.

  • Freezes on Web sites in flash like Youtube. The Watch Windows Task Manager process FlashPlayerPlugin opens and crashes again and again. Up to date - how can I solve this problem?

    Firefox crashes whenever I open a site in flash like Youtube. If I open to the process task manager, then I see that flashplayerplugin will try and start over and over again and seems to hang over and over again. My Firefox and flash player are up to date. I tried to uninstall and reinstall firefox and flash player. I tried to turn off all the other modules. I even tried to install older versions of flash player, and nothing has worked. My wife uses Firefox to work, so is it possible to fix it?

    You can check for problems with the latest version of the Flash plugin and try these:

    • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
    • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
    • turn off hardware acceleration in the Flash plugin

    Alternatively, you can try to disable hardware acceleration in Firefox.

Maybe you are looking for