Similar Questions

• TN765t constant motorola GPS ads on screen?

  I just bought a TN765t GPS, and besides a horrible blatant flaw, it's a great little gadget. Whenever I try to use it, set a destination or even just leave it sitting idle on the couch... he decided to advertise. Advertising itself. A rather long video, ads for motorola GPS devices and their feature sets, interrupting everything I was doing. If I press on the screen (several times) it falls ultimately to its normal display, but also wipe my destination. I must then integrate this middle of the road. This makes not only completely useless GPS, it is rather dangerous in my opinion.

  It almost seems that the unit is defined as a demo of "floor model", where he is just at a store every day indicating the specifications.

  Is there a way to fix this, or is this just a normal feature of the 765 series? If so, I do not understand why I paid for a screen of advertising (coming of all things) which I probably won't use. These ads are not from time to time, they are all 2 or 3 minutes. It's incredibly frustrating.

  Evan

  indrid wrote:
  I just bought a TN765t GPS, and besides a horrible blatant flaw, it's a great little gadget. Whenever I try to use it, set a destination or even just leave it sitting idle on the couch... he decided to advertise. Advertising itself. A rather long video, ads for motorola GPS devices and their feature sets, interrupting everything I was doing. If I press on the screen (several times) it falls ultimately to its normal display, but also wipe my destination. I must then integrate this middle of the road. This makes not only completely useless GPS, it is rather dangerous in my opinion.
  It almost seems that the unit is defined as a demo of "floor model", where he is just at a store every day indicating the specifications.
  Is there a way to fix this, or is this just a normal feature of the 765 series? If so, I do not understand why I paid for a screen of advertising (coming of all things) which I probably won't use. These ads are not from time to time, they are all 2 or 3 minutes. It's incredibly frustrating.
  Evan
  

  After the fact... I think if you go to "main Menu"... "'Help', you will see an option it ' exit the demo Mode", activate this box, and you should be good to go...

• "the center of security services cannot be started.

  Vista Home Premium

  My security of the Windows Security Center service is disabled and I can't start at all. The Red Shield has a constant cross thereon. I'm afraid that I don't have a firewall.

  I have the basics of security of Microsoft on OK but I don't think that this has a firewall and I have a free version of the Antivirus AVG installed 2012 edition but again, don't think that there is a firewall on it?

  Any help to solve would be appreciated. My computer knowledge is pretty basic you could collect and I need step by step instructions, I'm afraid.

  Thank you.

  (1) Windows has its own firewall - and does not normally require any other.

  (2) NOT to use two anti-virus on the same PC programs - they will fight them to the death!

  (3) AVG is bloated - and since 2006 (when I used to sell!) - I would now recommend against its use.

  Uninstall AVG, then run Remover utility

  MSE to uninstall and reinstall.

  What other anti-virus have NEVER been installed on this machine?

  Download AVG Remover here

  http://www.Avg.com/us-en/utilities

  Follow the instructions to run it, and then restart the machine (upon request or not, and if the program restarted already or not).

  After the reboot, open a command prompt and run the following command

  NETSH WINSOCK RESET

  You will be advised to reboot - do.

• I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

  I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

  Cache and history of the site Clear settings - Safari -.

  (1232)

• New computer with Win 7 and I'm drowned in ads, pop ups and constant redirects. Help, please!

  I just got a new computer with Windows 7, and I had nothing else that problems with redirections constants, pop up windows, ads pasted on top of advertising.  It's really driving me crazy.  Any time I click on what (in Facebook, or my website, or Twitter or whatever it is!) I am redirected to a new tab with an advertisement trying to make me spend it, or download that.

  When I'm on Facebook, I brilliantly flashing ads covering my groups and pages.  When I opened my site, I have flashing ads to the bottom of the left and the right of my blog and all my pages.

  I tried everything I know to stop this, and nothing works.  I ran Malwarebytes, and they found pieces of adware 2029!  I quarantined and deleted and ran two additional scans that came clean, but ads and redirects are always there, drive me to madness.

  Then someone please help me, I can't use this computer as it is, it takes twice as much time to my work, and that rebounds, flashing ads are too distracting for me to even write in my blog.

  Help, please

  Check out this free removal guide: http://malwaretips.com/blogs/remove-adware-popup-ads/

• I recently downloaded firefox on my new laptop computer and it's annoying to have my research redirected, constant ads popping up telling me to install the software.

  I do not understand why this is happening, but I don't have time to constantly close popup windows and redirects, I can always go back to my old browser, Google Chrome, but I wanted to support Firefox. Why can't fix you it on your side?

  Hello, you have a malicious this addon in your firefox profile. Please, try the following steps:

  1. Reset firefox (this will keep your bookmarks and passwords)
  2. then go to the firefox menu

     

     > addons > extensions and where there are still extensions listed there, disable them.

  3. Finally, run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to ensure that adware is not present in other parts of your system as well.

  Fix Firefox problems caused by malicious software

• the expression ADS in any url prevents the page from loading

  two sites that do this are
  https://online.metrocu.org/banking/ads/home/intercept/SignInIntercept?returnUrl=%2Fbanking%2f
  (my car)

  and

  http://www.mabcommunity.org/ads/home.HTML?view=featured
  MAB Boston Disability services

  I tried to turn off my ad blocker, but it is always the case; anything you can do to help will be great.

  Thank you; Sorry it took so long to come back; These sites have crossed without problem in safe mode.

  I went into my antivirus - Kaspersky Labs software and added these two sites to the "authorized" under AntiBanner URL options.

  Have a nice day and thanks to all who responded.

• Pop - up ads and Web sites, since the load OSX ElCapitain latest

  Given that the last loading system updates, I have constant problems with pop-up ads and Web sites?  Any solution?  OISIN

  Click here and follow the instructions, or if it is not a type of adware is covered by them on the computer, these. If you would rather not remove it manually, you can run rather MalwareBytes for Mac.

  
  

  MalwareBytes simplifies the process of removal of adware, but does not stop it or other malware from entering the computer. It should not be invoked to prevent future incidents; Instead, avoid downloading software from sources other than the Mac App Store or Developer Web sites.

  
  (141817)

• Keybord tip to quickly insert a value in an array constant

  Hello world
  I just want to know if there is a keyboard trick that allows you to switch quickly from one element to the next time (or another) I type in an array of constant values, you know if there is?

  I mean, it's a key on the keyboard as a tab that allows you to quickly move from one cell to the following in the grid control.

  Thank you in advance,
  Kind regards.

  Cross-posted here.

  Solution possible here, if you're a Quick-Dropper.  Type your stuff in Excel, copy the table and use this plugin QD.

• Estimate of exponential decay time constant - taking tangent lines

  Hello

  How would you estimate a first order decay time constant? I have a system that loses heat very slowly and I wish assess the time constant of the first part of the data in order to allow more frequent tests (I know it will end by decomposing to).

  I know I can make a good estimate based on the initial slope of the curve, but I don't know how to implement this in LabVIEW. Does anyone know how I can make the VI calculate a tangent line to a graph, and to find where it crosses another line?

   

  
  Thank you

  How about using the

  VI exponential form

  Have the Palette: Screw

  Request: Full development system

  Returns the exponential fit to a set of data (X, Y) using the method of least squares, less absolute residual or Bisquare.

  This VI uses the General iterative least squares method and the method of Levenberg-Marquardt to adjust the data to a curve exponential of the General form described by the following equation:

  f = ae^bx + c

  where x is the input sequence X, a is the amplitude, b is depreciationand c is out of step. This VI find the values of a, b, and c that better observations (X, Y).

• Registration for authentication and crossing area of Jabber

  Hello

  I used TMS 13.1.2 as authentication source LDAP for VCS-control and VCS Expressway, but noticed, that not all passwords are synchronized correctly in the LDAP H.350 MSDS database, because the user is recorded in two entries. I went to the local authentication, including the database configuration on VCS - C and the local database with the transmission by proxy SIP VSC-E to the VCS - C records. It works fine and I am able to make calls.

  I created the search on VCS highway rules to replace all aliases MCU to an auto attendant external special. Stored locally on the VCS-E endpoint points are allowed to call internal aliases. I tried to do the same for the Jabber Clients, which is recorded in the crossing area of the VCS - C. This works as expected, because the Jabber Clients are not enrolled in a local area and SIP GUEST is not in dispute.

  I expect that all the Jabber client message will be challenged by the VCSE, but this isn't the case. Accordingly, the guest of the SIP protocol is treated as an external user and not an intern.

  May 9 10:11:28     tvcs: UTCTime="2012-05-09 08:11:28,425" Module="network.search" Level="INFO": Detail="Search rule 'my.domain proxy registrations' did not match destination alias [email protected]/* */'"
May 9 10:11:28     tvcs: UTCTime="2012-05-09 08:11:28,423" Module="network.sip" Level="INFO": Dst-ip="84.113.206.194" Dst-port="62503" Detail="Sending Response Code=100, Method=INVITE, To=sip:[email protected]/* */, [email protected]/* */"
May 9 10:11:28     tvcs: UTCTime="2012-05-09 08:11:28,419" Module="network.sip" Level="INFO": Src-ip="84.113.206.194" Src-port="62503" Detail="Receive Request Method=INVITE, Request-URI=sip:[email protected]/* */, [email protected]/* */"

  These are the rules of research that I was talking about:

  110     Enabled     "local registered to Traversal"     LocalZone      No      Alias pattern match      Regex      ^(.*)@my.domain$      Leave      Continue      TraverselZone
115     Enabled     "authenticated to internal"     Any      Yes      Alias pattern match      Regex      ^(.*)@my.domain$      Leave      Continue      TraverselZone
120     Enabled     "mcu all to 899"     Any      No      Alias pattern match      Regex      ^(900\d*|conference)@nts\.eu$      Replace      Stop      TraverselZone

  Is it possible to allow the Jabber Clients to be authenticated on the VCS-E, so a search rule can aply?

  Thanks for your help!

  You get the 'Preparation device' key for your VCS-E so its free.

  It may require a valid service contract.

  I have the provisioning again running on a cluster of VCS - E in my lab, works very well.

  In ancient times that the deployment has not officially supported, it was running great in any case :-)

  Did not check if its now a deployment with support.

  I don't know enough about your deployment to say what would be the best for you.

  There will be some scenarios where not all features can be deployed together for some reason any.

  Maybe someone can help you by looking at how implementation could be done better.

  If you have authentication and integration of ads, that you need to connect

  the VCS-E announced as well. Endpoints (at least for now) is not auth via AD, but you could

  use a database of h.350 (could also be hosted with AD) or the local authentication database.

  Now, which is also spread by TMS, could be an answer to your question as well.

• Is there a keyboard shortcut for a constant power?

  Is there a keyboard shortcut for constant power, between two clips, in the first CC as cross dissolve (Ctrl + D)?

  Thank you in advance!

  Set it as a audio trans. by default and use shift ctrl d

• InDesign 5.5 constant crashing Lion (new installation). Help, please.

  I had a constant battle to get InDesign to work on my iMac since the installation of Lion.

  I erased from my hard drive twice to reinstall the system from scratch (installation of Snow Leopard first, then Lion - all my backups Time Machine in SnowLeopard were replaced by a single Lion so I can't go back to Leopard without losing all my preferences for other backup applications).

  I also deleted all fonts, both with library and FontAgent Pro.

  I even used an Admin user new and clean, but after installing InDesign 5.5 (seen previously not unhooked it and deleted the folder Adobe Indesign preferences in my library (now hidden)), the problem persists. I HAVE WORK TO DO!

  Here is the crash report. If anyone can help, I'll be SO grateful... fingers crossed someone will spot something.

  http://pastebin.com/5t2AxeQ1

  Follow the mentioned below as follows: -.

  Solution 1: Delete the Datastore SING folder.

  1. Quit InDesign (force quit, if necessary).
  2. Move to the following folder on the Office:
     Mac OS: [Startup drive] / library/application Support/Adobe/SING/Mark II/Datastore
     Note: This is in the library folder on the root of your startup disk. There is a similar course in your user folder, but this isn't the path, you have to work in. Windows 7/Vista: C:\ProgramData\Adobe\SING\Mark II\Datastore
     Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\SING\Mark II\Datastore
  3. Relaunch InDesign.
  4. Try to reproduce the problem.

  If the problem is NOT resolved with the above solution, proceed to Solution 2.

  Solution 2: Remove the component to SING.

  Note: Users who do not file .indd users receive ideogram of InDesign versions can function perfectly without the "SING" component.

  1. Quit InDesign (force quit, if necessary).
  2. Move to the following folder on the Office:
     Mac OS: [Startup drive] / library/application Support/Adobe/SING/Mark II
     Windows: C:\Program Files\Fichiers Files\Adobe\SING\Mark II
  3. Relaunch InDesign.
  4. Try to reproduce the problem.

• Cross platform HTML Email Questions

  Hello

  I create new html e-mails to in dreamweaver for use in a service like constant contact. The service I use is COMF5. They have a rudimentary (but nice) WSYIWYG Editor so that I'm him giving a whirlwind in Dreamweaver.

  First of all, I made the mistake of creating a beautiful in CSS, pasted file in the editor and found some divs and info floating around.

  I just found an article by an adobe pro on this operation and ZOMG, that help a lot. Here's what I think I underatand and my question:

  1. all is tables, including the background that is created at 98%.

  2. the Organization must be nested tables.

  3 attributes are set in the table by the use of the property bar and not to include the creation of css rules.

  4. the only exception is created within the limits of the table of inline styles.

  5 rule is to have no CSS sitting at the top of the code in the important document.

  My big question at the present time, this is how I can code links to be other than blue and underlined? I would use CSS to do this on my pages.

  Thanks in advance of ain for more insight!

  Rob

  For the HTML e-mail messages only, you can set styles in thetag and it will get picked up by most e-mail clients.

  The tables are very good. But I do not recommend the complex nested tables.  You want to keep things as simple as possible.

  CSS Inline rules are perfectly OK.   Background (CSS or HTML) are not supported in Outlook 2007.

  E-mail HTML & Newsletter explosions

  http://ALT-Web.com/articles/HTML-emails.shtml

  Creating cross-client HTML emails

  http://www.Adobe.com/devnet/Dreamweaver/articles/html_emails.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• I think one of my effects Audio Cross dissolve is missing

  Hi all

  I'm a little blearly in the eyes after a long shoot, but I'm starting to edit this video I'm looking for an audio dissolve transition that I use always, but I think it's missing or maybe I dragged to another folder (if possible).

  Here's the transistions to dissolve only audio that I see in my CS4 audio effects transitions:

  Subfolder: melted chained:

  Constant gain

  Constant power

  Expontential melted

  I don't know that I had at least an another cross dissolve choice - one that I use all the time...   In my list above you see any audio cross dissolve transitions that are missing?  And if so, how can I find it or restore it?

  
  Thank you

  ... Rowby

  No, it's complete.