Unable to save doc after upgrade

Similar Questions

• Workstation 7 unable to reserve memory after upgrading the host Windows 8.

  I just updated my computer, running VMWare Workstation 7, Windows 8.

  Now, when I start a VM, I get a message similar to:

  "Not enough physical memory is available to power on this virtual machine with its configured settings.  To resolve this problem, increase the support of physical memory for all the virtual machines to XXX MB or adjust the settings of extra memory to enable more virtual memory machine to be swapped. »

  • In the preferences, memory, my memory 7138 MB reserved for all virtual machines.
  • I chose 'Allow more virtual memory machine to swap'
  • Windows Resource Monitor indicates that I have more than 5 GB of free memory.
  • I tried to upgrade to 7.1.6, but that did not fix the problem.

  But I am still unable to start any VM - even one with as little as 128 MB of RAM that are entrusted to him.  These are the same VMS I was used to running on Win7 before the upgrade.

  -> Adam

  (The display for people who might find this thread through a search on the web)

  I got the same error. What worked for me was to uninstall, reboot, then reinstall as follows:

  1. define the model of compatibility to Setup WinXP SP3 and run as administrator.

  2. install by double-clicking on the Setup

  3. once the installation is completed, set the compatibility to vmware.exe model also be WinXP SP3 and run as administrator.

  On workstation 7 starting, I was then able to start my vms without problem.

  VMware Workstation 7.1.6 - 744570. Host is an x 64 i7 - 3520 M with 8 GB of ram running Windows 8 rtm. Administrator account.

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• Unable to connect to State Bank Anywhere App on my IPhone 6 + after upgrade to IOS 10

  Unable to connect to State Bank Anywhere App for my IPhone 6 + after upgrade to IOS10. Tried uninstalling and reinstalling, but to no avail.

  Contact the developer of the app. They probably need to update the application to ensure compatibility with iOS 10

• Unable to connect to Apple ID after upgrade to ElCapitan 10.11.5

  I have the Macbook Air 11 "1.4 Ghz i5 with 4 GB 1600 MHz DDR3 (early 2014)

  I can't connect to the Apple ID (iCloud, Appstore...) after upgrade in ElCapitan 10.11.5

  About 3 weeks ago I improve my OS in ElCapitan as there was a signal of the Appstore upgrade.

  The download process and the installation was successful, but stuck on 'prepare your mac' session. It took about 2 hours, with cursor processing... Then I closed (push the power button on the keyboard) and turn.

  My Mac can work and in "about this Mac" already made it known that the OS is ElCapitan 10.11.5.

  But unfortunately, since then, I can't sign my Apple ID in the Mac (I use several apple 'iphone', 'ipad' products and my apple ID still works)

  

  I came to the nearby authorized Apple service, they don't have that one solution to re - install my Mac and I have to pay

  Maybe someone has a solution...

  Hi atiqurrakhman,

  From the information provided, it appears that you are unable to connect to your Apple ID for several services on your Mac from your update of OS X El Capitan 10.11.5. I know it's very important to have access to these services on your Mac, then I would be happy to provide assistance.

  Before you start, I recommend that you create a backup of your data using Time Machine. This website will provide more information:

  Use Time Machine to back up or restore your Mac - Apple Support

  Since the update seems stuck, it can not been installed properly on your system. The next step, I would recommend that you reinstall OS X from recovery using the steps here:

  How to reinstall OS X on your Mac - Apple Support

  Reinstall OS X from recovery

  If a recent Mac, you can use OS X Recovery to reinstall OS X.

  

  1. Turn on your Mac.
  2. As soon as you hear the startup tone, hold down the command and R on your keyboard.
  3. Release the buttons after the appearance of the Apple logo.
  4. If you are prompted, select a Wi - Fi network, or connect your Mac to the Internet via an Ethernet cable.
  5. After that the recovery menu will appear, select the option to install OS X.
  6. Follow the prompts on the screen to select your destination drive and install OS X.

  Once this process is complete, try to sign in with your Apple ID using multiple services to see if the problem has been resolved.

  Have a great rest of your day!

• Unable to save my Cs3 after reformatting my laptop computer.

  Unable to save my CS3 after reformatting my laptop computer. Indicates a connection failure. "We were unable to connect to Adobe to register your product."

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I can't print after upgrade to Mac OS Sierra (error "Unable to filter")

  I can't print after upgrade to MacOS Sierra, always shown "cannot filter. I use AirPrint for Epson L355. Tried to reset the printer settings, uninstall and then install the printer, always in vain 'filter '.

  I think it has something to do with MacOS Sierra 10.12.1 Beta (16B2333a). Help, please!

  Update to the Sierra officially released

• Unable to access iBooks Store for iPad after upgrade to iOS 9.3.3.

  We do not seem to access my iPad iBooks store 2 Air or my wife Mini 4 iPad after upgrading iOS 9.3.3 machines. When you click on any of the icons store across the lower part of the application, we get a blank white page. We can access all our books purchased on the iCloud, but cannot look for first timers. The iBooks app seems to work normally on my iPhone 6 after the iOS upgrade. Anyone else has a similar problem?

  Yes. Double-click the home button on the iPad and the iBooks app sliding upwards and out of the screen to close.

  Click on the home button to return to the home screen, then hold home and power/sleep buttons for 10-15 seconds or until the Apple logo appears.

  Reset draw iPads. Let them restart and try opening the iBooks App again.

  No data should be lost by the present.

• HP Pavilion notebook pc p001tx: unable to find audio beats after upgradation from windows 10

  I have updated my windows OS 8.1 for windows 10 previously audio beats laptop after upgrading pc speakers it's been showing realtek high definition audio. I completely lost my beats audio experience. Please guide me how to fix this problem

  Have you looked in the control panel?

  With my current HP Omen 15 loan product specifications, this is where he now resides after the upgrade to Windows 10.

  Help us help you by displaying the following information.

  1. the full name of the model. or product number. the laptop - see web document this HP if you do not know how to locate the product number or model number.

  Try the following audio driver Realtek 10 Windows. It can return the function Beats to your laptop.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

• After upgrading my iPad to IOS 9.3 2, I was unable to reactivate the ipad.

  After upgrade my iPad 2 for IOS 9.3, I couldn't turn back on iPad.  I already rebooted the iPad, but in vain.

  the same problem. iPad 2 is just a brick now. Apple *.

• HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

  Hello

  I upgraded Windows 8.1 to Windows 10 yesterday.

  Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

  When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

  On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

  Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

  Thank you best regards &,.

  Umesh

  Here are the technical details:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

  It is HD4400 Intel graphics

  Try the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  Download drivers HP pages not available right now.

• I'm unable to save CS3 (have or pdf or whatever it is) after the installation of Windows 10

  I tried to change the compatibility modes and it did not work / error message "unable to save picture."

  You're welcome, Dan.

• Cannot delete a save point after an upgrade to 11.2

  We have an application (written in APEX) which was working properly under Oracle 10.2, which has developed an error after upgrade to Oracle 11.2 when he tries to delete a record in the DIRECT workspace.
  
  In the 11.2 database, DBA_REGISTRY indicates the version of the workspace as 11.2.0.2.0 Manager
  I believe that in the 10.2 database, DBA_REGISTRY pointed out the version of the workspace as 10.2.0.4.3 Manager but I'm not 100% confident in this regard - we didn't record this information before the upgrade, so I work out note, according to what I believe was the last time that we have improved the Workspace Manager in this database.
  
  A user in our system has a package that contains the procedure
  

    procedure move_savepoint( p_savepoint_name VARCHAR2 )
    AS
    BEGIN
      dbms_wm.deleteSavepoint( 'LIVE', p_savepoint_name );
      dbms_wm.createSavepoint( 
          'LIVE', 
          p_savepoint_name, 
          '<<savepoint description>>' );
    END move_savepoint;

  The user has got the WM_ADMIN_ROLE role.
  
  The APEX application connects to the database that the user APEX_PUBLIC_USER. The APEX_PUBLIC_USER user has been granted EXECUTE access on user A package and got the role WM_ADMIN_ROLE. Savepoints existing are all in the DIRECT workspace and are all owned by APEX_PUBLIC_USER
  
  Following upgrade 11.2, the call to the MOVE_SAVEPOINT procedure fails with error ORA-20022 when we are connected as A user
  

  BEGIN
    a.package_name.move_savepoint( '<<savepoint name>>' );
  END;
  
  ERROR at line 1:
  ORA-20022: insufficient privileges to delete savepoint
  ORA-06512: at "WMSYS.LT", line 6913
  ORA-06512: at "DW_APEX.PKG_TOTS", line 320
  ORA-06512: at line 2

  We tried to give the user a all WM system privileges
  

  BEGIN
    dbms_wm.GrantSystemPriv( 
          'ACCESS_ANY_WORKSPACE, CREATE_ANY_WORKSPACE, REMOVE_ANY_WORKSPACE, ' ||
              ' MERGE_ANY_WORKSPACE, ROLLBACK_ANY_WORKSPACE, FREEZE_ANY_WORKSPACE', 
          '<<User A>>' );
  END;

  but this does not change the error message.
  
  If we modify the package to be AUTHID CURRENT_USER and log on as A, we run the MOVE_SAVEPOINT procedure successfully. But we cannot run from the application when we are connected as APEX_PUBLIC_USER.
  
  I can't think about all the privileges that we are missing at this point. And the fact that it worked before the upgrade to 11.2 in place leads me to suspect that something may have changed in the Workspace Manager or that there are problems with our upgrade. Is there something we are dominant?
  
  Justin
  
  Published by: Justin Cave on June 15, 2011 11:30
  
  A little better code formatting

  Hi Justin,

  There is no way taken in charge to change the owner of a workspace or a checkpoint, only to rename. The owner is fixed after its creation. However, if savepoints are always created using this procedure, then you should be able to see that they are migrated based on the current owner (APEX_PUBLIC_USER vs A).

  If it is not possible to change outside of the procedure, it would be simpler to update internally to the owner. Just drop a SR.

  Kind regards
  Ben

• No output micro HDMI after upgrading to Win 8.1

  My new Yoga 2 Pro has a secondary display connected via micro HDMI port. He first worked as a charm. But after upgrading to new Windows 8.1 (this is done automatically) it is no longer produced anything to micro HDMI port. Display and the cable is fully functional. But even if the screen is turned on, the computer is unable to save and apparently it cannot display anything. Micro HDMI port seems to be non-existent.

  After upgrade of windows, I tried to uninstall / reinstall the display driver. I also upgraded to Win 8.1 Intel drivers versions found on the support site of Lenovo (including the BIOS display driver Intel HD 4400 15.33.18.64.3496 and chipset 9.4.0.1026, 76CN38). But nothing seems to work.

  A solution in the forum is to change the cable, but I think that there is no sense here that the cable worked perfectly until the upgrade.

  Can anyone suggest a solution?

  Lenovo: Is there a driver for Intel version 15.36.0.3652 on the Intel Web site. However, there is a blockage on the pilot, you need to install own Lenovo driver downloads. Can you check if this solves the problem?

  Sorry, a new cable solves the problem

• vCAC Designer (cloudutil.exe) will not launch after upgrading to 6.1

  After having recently upgraded 6.0.1 to 6.1, we are unable to launch the vCAC GUI Designer (cloudutil.exe). The error stated at the launch of the designer customer is as follows:

  

  We tried the following already without success:

  1. We have a ticket open with support. A sev 1 for two weeks now. The ticket is with genius. Substantial quantities of newspapers were provided to support.
  2. The designer has been improved in 6.1 installation. We followed the procedure to uninstall the old client of Designer, download a new of the IaaS VAMI and install it.
  3. We get the same error, no matter which client or server is installed on the client of the designer. We tried the IaaS server itself (Windows Server 2008 R2 SP1) and several client machines (WIndows 7 SP1).
  4. We use self-signed certificates. Not that it should matter as it was working before the update 6.1 with self-signed certificates, but we validate the cert is in the store of confidence on all computers where the client attempts to run from.
  5. We tried to remove the client, ensuring that the customer directory no longer exists and reinstall the client.
  6. Also tried running Setup of customer "as an administrator".
  7. Validated the client installation program (DesignCenter - Setup.exe) is not "blocked" by right-clicking on it-> properties-> unlock.
  8. Tried to launch the Designer customer (cloudutil.exe) in different compatibility modes.
  9. We are able to run the query in the CLI commands by using cloudutil.exe. This confirms that he is able to talk to the back end. We can even list of all our stubworkflows and see the various revisions of them, but you can't change/see the stubworkflows using the CLI (this must be attached to a separate... note).

  We noticed the DynamicOps.Repository Assembly in the error references Version 6.0.0.0 after the upgrade. Some assemblies is not upgraded / replaced as part of the upgrade, it appears, so it's possible, it's normal, but it stood out.

  Unrelated to this, we are having a problem with the workflow specific heel after the upgrade as well and you have another position open about it here that Workflow Stub WFStubBuildingMachine fails after upgrading to 6.1

  Because we cannot enter the designer customer, we are not able to solve the problems, which means that we are down hard. We would prefer not to roll back even if we have good backups, as if no one else knows this problem then VMware will probably not initially get of it, and we will not be able to upgrade to 6.1 down the road with confidence.

  Has anyone seen this or something similar? Even if you do not, you have any suggestions to try?

  In case someone else runs into this problem, here is what has been done to work around this problem:

  • Open the cloudutil.exe.config file located in the Design Center directory is installed in.
  • Add the following block of the code highlighted in red between the two lines in black.
  • Save the file and close.
  • Restart the Client to the designer.

  This will tell the designer Client to use only 6.1 assemblies at the launch. The customer refers to 6.0 assemblies during the launch after the upgrade which are not present on the file system longer, so it's the only way known to work around him. The development isn't sure why old assemblies are always referenced, but they are reproduced it in their laboratory.